| 1 | 1 | Excavation for Structures (Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.) Mechanical Means, Depth upto 3 m | BI01010001010000000000000515BI0100001113 | 5804 | M3 |
|---|
| 2 | 2 | Excavation for Structures (Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.) Ordinary rock (not requiring blasting), Mechanical Means | BI01010001010000000000000515BI0100001114 | 562 | M3 |
|---|
| 3 | 3 | Excavation for Structures (Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.) Hard rock ( blasting prohibited ) | BI01010001010000000000000515BI0100001115 | 328 | M3 |
|---|
| 4 | 4 | Plain/Reinforced cement concrete in open foundation complete as per drawing and technical specifications. PCC Grade M15 | BI01010001010000000000000515BI0100001116 | 168 | M3 |
|---|
| 5 | 5 | Plain/Reinforced cement concrete in open foundation complete as per drawing and technical specifications. RCC Grade M35 | BI01010001010000000000000515BI0100001117 | 1747 | M3 |
|---|
| 6 | 6 | Supplying, fitting and placing un-coated HYSD bar reinforcement in foundation complete as per drawing and technical specifications | BI01010001010000000000000515BI0100001118 | 204 | MT |
|---|
| 7 | 7 | CONFIRMATORY BORING | BI01010001010000000000000515BI0100001119 | 60 | M |
|---|
| 8 | 8 | Plain/Reinforced cement concrete in sub-structure complete as per drawing and technical specifications. RCC Grade M35. Height 5m to 10m, Using concrete Mixer, Height upto 5m. | BI01010001010000000000000515BI0100001120 | 2066 | M3 |
|---|
| 9 | 9 | Back filling behind abutment, wing wall and return wall complete as per drawing and Technical specification and direction of E/I. Granular material. | BI01010001010000000000000515BI0100001121 | 5812 | M3 |
|---|
| 10 | 10 | Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification. | BI01010001010000000000000515BI0100001122 | 1010 | M3 |
|---|
| 11 | 11 | PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification | BI01010001010000000000000515BI0100001123 | 26 | M3 |
|---|
| 12 | 12 | Reinforced cement concrete approach slab including reinforcement and formwork complete as per drawing and Technical specification | BI01010001010000000000000515BI0100001124 | 52 | M3 |
|---|
| 13 | 13 | Providing weep holes in Brick masonry/Plain/Reinforced concrete abutment, wing wall/return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical specifications and direction of E/I. | BI01010001010000000000000515BI0100001125 | 400 | Each |
|---|
| 14 | 14 | Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and technical specifications and direction of E/I. | BI01010001010000000000000515BI0100001126 | 216 | MT |
|---|
| 15 | 15 | Furnishing and Placing Reinforced/Prestressed cement concrete in super-structure as per drawing and Technical Specification and direction of E/I. RCC/PSC Grade M35. Using concrete mixer. For solid slab super-structure, 18-28% of (a+b+c), Height above 10m. | BI01010001010000000000000515BI0100001127 | 640 | M3 |
|---|
| 16 | 16 | Construction of precast RCC railing of M30 Grade, aggregate size not exceeding 12 mm, true to line and grade, tolurence of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications. | BI01010001010000000000000515BI0100001128 | 196 | M3 |
|---|
| 17 | 17 | Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications | BI01010001010000000000000515BI0100001129 | 87.325 | M3 |
|---|
| 18 | 18 | Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and technical specifications | BI01010001010000000000000515BI0100001130 | 212 | MT |
|---|
| 19 | 19 | Strip Seal Expansion Joint (Providing and laying of a strip seal expansion joint catering to maximum horizontal movement upto 70 mm, complete as per approved drawings and standard specifications to be installed by the manufacturer/supplier or their authorised representative ensuring compliance to the manufacturer's instructions for installation.) | BI01010001010000000000000515BI0100001131 | 147 | M |
|---|
| 20 | 20 | Drainage Spouts complete as per drawing and Technical specification | BI01010001010000000000000515BI0100001132 | 32 | Each |
|---|
| 21 | 21 | Supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to IRC: 83 (Part-II) section IX and clause 2005 of MoRTH specifications complete including all accessories as per drawing and Technical Specifications. | BI01010001010000000000000515BI0100001133 | 614400 | CM3 |
|---|
| 22 | 22 | Painting on concrete surface (Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 Sq.m. ) | BI01010001010000000000000515BI0100001134 | 900 | M2 |
|---|
| 23 | 23 | Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications. Stone/Boulder | BI01010001010000000000000515BI0100001135 | 1008 | M3 |
|---|
| 24 | 24 | Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification | BI01010001010000000000000515BI0100001136 | 504 | M3 |
|---|
| 25 | 25 | Cutting of Trees, including Cutting of Trunks, Branches and Removal (Cutting of trees, including cutting of trunks, branches and removal of stumps, roots, stacking of serviceable material with all lifts and up to a lead of 1000 mtrs and earth filling in the depression/pit.) Girth from 300 mm to 600 mm | BI01010001010000000000000515BI0100001137 | 4 | M3 |
|---|
| 26 | 26 | Cutting of Trees, including Cutting of Trunks, Branches and Removal (Cutting of trees, including cutting of trunks, branches and removal of stumps, roots, stacking of serviceable material with all lifts and up to a lead of 1000 mtrs and earth filling in the depression/pit.) Girth from 600 mm to 900 mm | BI01010001010000000000000515BI0100001138 | 2 | M3 |
|---|
| 27 | 27 | Cutting of Trees, including Cutting of Trunks, Branches and Removal (Cutting of trees, including cutting of trunks, branches and removal of stumps, roots, stacking of serviceable material with all lifts and up to a lead of 1000 mtrs and earth filling in the depression/pit.) Girth from 900 mm to 1800 mm | BI01010001010000000000000515BI0100001139 | 2 | M3 |
|---|
| 28 | 28 | Clearing and Grubbing Road Land .(Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness.) By Mechanical Means. In area of light jungle | BI01010001010000000000000515BI0100001140 | 1.7 | HECT. |
|---|
| 29 | 29 | Excavation in Soil using Hydraulic Excavator CK 90 and Tippers with disposal upto 1000 metres. (Excavation for roadwork in soil with hydraulic excavator of0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m). Including Royalty @ Rs. 30.00 per cum but excluding the cost of watering, rolling & compaction. | BI01010001010000000000000515BI0100001141 | 771.6 | M3 |
|---|
| 30 | 30 | Embankment Construction with Material Obtained from Borrow Pits (Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2). Rolling with vibratory roller | BI01010001010000000000000515BI0100001142 | 70254.6 | M3 |
|---|
| 31 | 31 | Construction of Embankment with Material Deposited from Roadway Cutting (Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2) Rolling with vibratory roller | BI01010001010000000000000515BI0100001143 | 531.7 | M3 |
|---|
| 32 | 32 | Construction of Subgrade and Earthen Shoulders (Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2). Rolling with vibratory roller | BI01010001010000000000000515BI0100001144 | 4320 | M3 |
|---|
| 33 | 33 | Granular Sub-Base with Coarse Graded Material ( Table:- 400- 2) (Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401). for grading- I Material | BI01010001010000000000000515BI0100001145 | 2828.02 | M3 |
|---|
| 34 | 34 | Wet Mix Macadam (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.), With Smooth 3 wheeled Steel Roller | BI01010001010000000000000515BI0100001146 | 2828.2 | M3 |
|---|
| 35 | 35 | Prime coat (Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means.) | BI01010001010000000000000515BI0100001147 | 8820 | M2 |
|---|
| 36 | 36 | Tack coat (Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means.) | BI01010001010000000000000515BI0100001148 | 17640 | M2 |
|---|
| 37 | 37 | Dense Graded Bituminous Macadam (Providing and laying dense bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 to 4.5% by weight of total mix of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 507 complete in all respects.) for GradingII(19 mm nominal size) | BI01010001010000000000000515BI0100001149 | 441 | M3 |
|---|
| 38 | 38 | Bituminous Concrete (Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 % of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects), for Grading-I ( 13 mm nominal size ) | BI01010001010000000000000515BI0100001150 | 352.8 | M3 |
|---|
| 39 | 39 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface (Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.) | BI01010001010000000000000515BI0100001151 | 161 | M2 |
|---|
| 40 | 40 | Retro- reflectorised Traffic signs (Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing), 80 mm x 60 mm rectangular | BI01010001010000000000000515BI0100001152 | 8 | Each |
|---|
| 41 | 41 | Direction and Place Identification signs upto 0.9 sqm size board. (Providing and erecting direction and place identification retro-reflectorised sign asper IRC:67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing) | BI01010001010000000000000515BI0100001153 | 3 | Each |
|---|
| 42 | 42 | Road Delineators (Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide stripes, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and confirming toIRC-79 and the drawings.) | BI01010001010000000000000515BI0100001154 | 120 | Each |
|---|
| 43 | 43 | Road Markers/Road Stud with Lense Reflector (Providing and fixing of road stud 100x 100 mm, die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling hole 30 mm upto a depth of 60 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS 873 part 4:1973) | BI01010001010000000000000515BI0100001155 | 260 | Each |
|---|
| 44 | 50 | Add 12 % GST (in Basic Rate must fill 12) | BI01010001010000000000000515BI0100001162 | 1 | GST % |
|---|
| 45 | 51 | Add 1% Labour Cess (in Basic Rate must fill 1) | BI01010001010000000000000515BI0100001163 | 1 | L C % |
|---|
