Repair Works To Trade Pattern Furniture/ Map Furniture Etc Under Ge ( West ) Jalandhar Cantt As Described In Bill Of Quantities
Tender Value
16 Lakhs
Estimated cost
Bid Submission
12 Oct 2019
0 days left
EMD
32000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalandhar Cantt → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair Works To Trade Pattern Furniture / Map Furniture Etc Under Ge ( West ) Jalandhar Cantt As Described In Bill Of Quantities
BOQ
| Name of Work: REPAIR WORKS TO TRADE PATTERN FURNITURE/ MAP FURNITURE ETC UNDER GE (WEST) JALANDHAR CANTT | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | CHAIR SCHOOL WITH HARD BOARD (Drg No FD/E6/MAP/05 Sh 1/1)\nReplacement of PVC seat, 4mm thick with 4x10mm ribs running in longitudnal & transverse direction, moulded internally with seat, to be fitted with screws made of alumunium alloy complete all as specified. | 250 | Each | |
| 2 | 1.01 | S&F openable top, 18mm thick prelaminated particle board of extenior grade conforming to IS-12823 duly fitted to slide on the right frame. The edge of top shall be provided with 1.5mm thick PVC beading fixed with wire nails complete all as specified. | 250 | Each | |
| 3 | 2 | CHARPOY IP FOLDING WITH HARD TOP (Drg No FD-338 Sh 1/1) \nS&F long rail having mid joint, connected by two fish plates on each side, size 120x150 mm, 6mm thick MS sheet duly riveted by 4mm dia MS rivets joining both the long rail & central rail complete all as specified.\n\n | 15 | Each | |
| 4 | 2.01 | S&F top made out of 12mm thick plywood in two pieces BWR grade confirming to IS-303 complete all as specified. | 20 | Each | |
| 5 | 3 | CHAIR VARANDAH (Drg No FD-MAP-11/15 dt 21.09.11 & FD -259)\nWelding to leg joints any size, electric arc or gas welding, joints of welded portion finished smooth complete all as specified.\n | 150 | Each | |
| 6 | 3.01 | M&L for recanning of chair verandah (Godrej pattern) with and including half round plastic cane 2mm to 2.5mm wide and for border 3mm wide cane plastic cane shall be conforming to IS: 5378-1994 type-I(HDPE) and type–II (LDPE) including cutting and removing of old unserviceable cane from the frame complete all as specified.\nMake of Cane : Shah Plastic/Premier | 300 | Each | |
| 7 | 3.02 | M&L for preparation of old steel surfaces of chair verandah and applying one coat of synthetic enamel paint (white) with brushes complete all as specified. \nMake of Synthetic Enamel Paint: Asian, Shalimar, Nerolac, Burger, Johnson & Nicholson (1st quality)\n | 300 | Each | |
| 8 | 4 | CHARPOY GI PIPE (Drg No FD-220)\nS&F in replacement, long rail, 1.88 m long made out of 32mm dia, GI pipe, medium grade, cut to required length, threading both ends and including taking out old unserviceable long rail from GI charpoy frame complete all as specified. \nMake of pipe:- JINDAL/ TATA/ PARKASH/ BST/ OSWAL\n | 100 | Each | |
| 9 | 4.01 | Fixing only, in replacement, short rail, 0.815 m long made out from old long rail 32mm dia, retrieved from Srl item No 4.00 here-in-before including cutting and threading both ends & fixing in position including taking out old unserviceable short rail from GI charpoy frame complete all as specified.\nNote:- Long rails retrieved from Srl Item No 4.00 shall be converted into two short rails and credit recovered for balance unservicable pipe. | 200 | Each | |
| 10 | 4.02 | S&F GI elbow 3 way duly threaded (ISI marked) suitable for 32mm dia GI pipe including taking out old unserviceable elbow from GI charpoy frame complete all as specified. | 100 | Each | |
| 11 | 4.03 | S&F in replacement 12mm thick plywood, 7 ply, commercial BWR type, size 1980x900mm fixed with 10 nos bolts & nuts including washers (3 nos on long rail & 2 nos on short rail each) including S&F flat iron stiffeners/supports 3 nos made out of 40x4mm flat iron, 850mm long, welded to long rails, gap between rails and plywood top to be filled with 4mm thick 40mm wide , stiffeners/supports also to be fixed with plywood top with 2 nos bolts & nuts provided to each stiffeners/supports including painting to mild steel work with synthetic enamel paint black, including removal of unserviceable newar, tightening of check nuts, elbows, rails, legs etc complete all as specified. | 200 | Each | |
| 12 | 5 | TABLE PEG (Drg No FD-384)\nM&L for replacement of top of table, size 450mm x 300mm, made out of 18mm thick pre-laminated particle board (exterior grade) melamine faced ISI marked complete all as specified and as directed. | 250 | Each | |
| 13 | 5.01 | M&L for replacement of leg made out of 1st class hard wood (Sheesham), size and shape as shown on drg complete all as specified and as directed. | 150 | Each | |
| 14 | 5.02 | M&L for preparation of surface of table with sand papers for smoothening, removing scratches, spot and dots etc and polishing with french polish complete all as specified and as directed. | 250 | Each | |
| 15 | 5.03 | M&L for providing PVC shoes of best quality including removing of old unserviceable PVC shoes complete all as specified. | 500 | Each | |
| 16 | 6 | MIRROR DRESSING GENTS (Drg No FD-E6/MAP/16)\nS&F mirror box/cabinet portion of size 600x1200mm supported on teak wood legs of 38x38mm & wooden bracket made out of Teak wood Section 38x112x112mm complete all as specified.\n\n\n | 250 | Each | |
| 17 | 6.01 | S&F in replacement looking mirror 5.5mm thick backed by 12mm thick BWR grade ply as per IS-303 covered by decocrative PVC mould and supported on 50x28mm Teak wood frame complete all as specified. \nMake: Modi Guard/Saint Gobin | 200 | Each | |
| 18 | 6.02 | S&F in replacement of continous piano hinges to open the mirror frame in horizental circle complete all as specified. | 250 | Each | |
| 19 | 6.03 | S&F magnetic catch-02 Nos at top & bottom, inside the cabinet to catch mirror frame of best quality duly apporved complete all as specified. | 250 | Each | |
| 20 | 7 | BIN LINEN MULTIPURPOSE (Drg No FD-E6/MAP/09)\nS&F shelves and drawers made out of 18mm thick prelaminated particals board, BWR grade conforming to IS-12823 and back shall be of 12mm thick BWR grade plywood conforming to IS-303 complete all as specified.\n\n | 20 | Each | |
| 21 | 7.01 | S&F of shutters made of 6mm thick ply with teak wood beading complete all as specified. | 20 | Each | |
| 22 | 7.02 | S&F in repalacement handle 100mm long made of brass of best quality complete all as specified. | 20 | Each | |
| 23 | 8 | BED HARD STEEL (Drg No FD-E6/MAP/08)\nS&F bed hard top made of 12mm thick BWR grade plywood conforming to IS-303, all metal work to be pretreated with apoxy polyster powder coating (black) complete all as specified.\n | 75 | Each | |
| 24 | 9 | CHAIR DINING WITH CUSHION (Drg No FD-MAP-II/04 & FD/E6/MAP/10)\nS&F removable seat (Cushion) made out of 75mm thick urethan foam with 40 denisty pasted with adhesive on 12mm thick BWR grade plywood conforming to IS-303, covered with acrylic fabric complete all as specified.\n\n\n | 200 | Each | |
| 25 | 9.01 | M&L for preparation of surface of chair with sand papers for smoothening, removing scratches, spot and dots etc including providing bamboo pins to joints where required and polishing with french polish complete all as specified and directed. | 200 | Each | |
| 26 | 9.02 | M&L for providing PVC shoes of best quality including removing of old unserviceable PVC shoes complete all as specified. | 400 | Each | |
| 27 | 10 | SOFA SET FIVE SEATER (Drg No FD-1113)\nM&L for replacement of long rail of size as per existing made of 1st class hard wood (Teak Wood) of long sofa (3 Seated) complete all as specified and as directed. | 25 | Each | |
| 28 | 10.01 | M&L for replacement of front & rear rail of size as per existing made out of 1st class hard wood of sofa (single seated) complete all as specified and as directed. | 30 | Each | |
| 29 | 10.02 | M&L for replacement of old unservicable cushion with new cushion 40 denisity size 21''x21'' 100mm thick duly covered with tapestry cloth best quality, three sides stiched and one side provided with zip complete all as specified and directed. Make: Kurlon or equivalent. | 250 | Each | |
| 30 | 10.03 | M&L for preparation of surface of sofa set 4/5 seater with sand papers for smoothening, removing scratches, spot and dots etc including providing bamboo pins to joints where required and polishing with french polish complete all as specified and as directed. | 25 | Each | |
| 31 | 11 | TABLE DINING FOR EIGHT PERSONS (Drg No FD-273)\nM&L for replacement table dining top of size 1800 mm x 900mm, made of 18mm thick pre-laminated particle board (Extenior Grade) melamine faced ISI marked including 18mm x 4mm teak wood beading all round complete all as specified and as directed. | 20 | Each | |
| 32 | 11.01 | M&L for replacement table dining of leg made of 1st class hard wood (Sheesham), size and shape as shown on drg including finishing the exposed surface with french polish complete all as specified and as directed. | 40 | Each | |
| 33 | 12 | TABLE CENTRE (Drg No FD-274)\nM&L for replacement of table centre top of size 900x450mm made of 18mm thick prelaminated particle board (exterior grade) ISI marked including 18mmx4mm teak wood beading all round complete all as specified and as directed. | 50 | Each | |
| 34 | 12.01 | M&L for replacement of leg made of 1st class hard wood (Sheesham) size and shape as shown on drg complete all as specified. | 20 | Each | |
| 35 | 12.02 | M&L for replacement of front or rear rail made of 1st class hard wood (Sheesham) size and shape as shown on drg complete all as specified. | 10 | Each | |
| 36 | 12.03 | M&L for replacement of side rail made of 1st class hard wood (Sheesham) size and shape as shown on drg complete all as specified. | 15 | Each | |
| 37 | 13 | TV TROLLY (Drg No FD/E6/MAP-4)\nM&L for replacement of shelf of tv trolly made out 19mm thick prelaminated particle board as per pattern existing complete all as specified. | 40 | Each | |
| 38 | 13.01 | M&L for replacement of unservicable tv trolly top made of 18/19mm thick prelaminated particle board of teak shade, with teak wood edge moulding all around as per drg complete all as specified. | 10 | Each | |
| 39 | 13.02 | M&L for replacement of unservicable tv trolly back made of 18/19mm thick prelaminated particle board as per drg complete all as specified. | 10 | Each | |
| 40 | 13.03 | M&L for replacement of unserviceable both sides made of 18/19mm prelaminated particle board as per drg complete all as specified. | 10 | Each | |
| 41 | 13.04 | M&L in replacement of nylon castor wheels complete all as specified. | 10 | Each | |
| 42 | 14 | CHAIR WRITING STEEL (Drg No TP)\nS&F in replacement PVC arm of Chair Writing MAP with new PVC arm (2 Nos) all as per existing size, shape and pattern as shown on drg complete all as specified. | 55 | Each | |
| 43 | 14.01 | S&F in replacement of old unservicable cushion with new cushion 40 denisity, with PVC lipping all around including new hot pressed plywood 12mm complete all as specified and as directed. Make: Kurlon or equivalent. | 55 | Each | |
| 44 | 14.02 | All as per Srl Item No 14.01 here-in-before but for back of chair complete all as specified. | 55 | Each | |
| 45 | 14.03 | M&L for preparation of old steel surface of chair writing and applying one coat of black Japan paint (1st quality ) complete all as specified. | 55 | Each | |
| 46 | 15 | CHAIR COMPUTER (Drg No FD/E6/MAP/01)\nS&F in replacement PVC arm of computer chair with new PVC arm (2 Nos) all as per existing size, shape and pattern as shown on drg complete all as specified. | 25 | Each | |
| 47 | 15.01 | S&F in replacement of old unservicable cushion with new cushion 40 denisity, with PVC lipping all around including new hot pressed plywood 12mm complete all as specified and directed. Make: Kurlon or equivalent. | 15 | Each | |
| 48 | 15.02 | All as per Srl Item No 15.01 here-in-before but for back of chair complete all as specified. | 15 | Each | |
| 49 | 15.03 | S&F in replacement of nylon castor wheels complete all as specified. | 60 | Each | |
| 50 | 15.04 | S&F in replacement Gas lift pneumatic system cylinder and assesory complete all as specified | 15 | Each | |
| 51 | 16 | TABLE COMPUTER (Drg No FD/E6/MAP-03 & TP)\nS&F in replacement computer table top made of 18mm thick prelaminated particle board with PVC lipping alround complete all as specified and shown on drg. | 20 | Each | |
| 52 | 16.01 | All as per Srl Item No 16.00 here-in-before but for key board tray, pull out tray fixed with telescopic channels-02 Nos complete all as specified | 20 | Each | |
| 53 | 16.02 | All as per Srl Item No 16.00 here-in-before but for drawer, fixed with telescopic channels-02 Nos and knob-01 No complete all as specified. | 20 | Each | |
| 54 | 16.03 | All as per Srl Item No 16.00 here-in-before but for shelf (horizontal or vertical or bottom), fixed with screws complete all as specified. | 20 | Each |
AI Tender Summary
Tender Timeline
Sep 23, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 14, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender