Construction Of Half Way Long Stay Homes At Ihbas Delhi, Executive Engineer (Civil) Ihbas, Dilshad Garden-Delhi

TDR : 21911633

Tender Notice
BOQ

Expired

Executive Engineer (Civil) Ihbas, Dilshad Garden , Delhi

Tender Brief : Construction Of Half Way Long Stay Homes At Ihbas Delhi

Document Fees
Refer document

EMD
₹ 2156000.0 /-

Tender Value
₹ 11.56 Crore /-

Submission Date
17-10-2019

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Name of Work: Construction of Half Way/ Long Stay Homes at - IHBAS, Delhi
1	1	Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqmon plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m,including getting out the excavated soil and disposal of surplus excavated soil asdirected, within a lead of 50 m.
2	1.01	All kinds of soil.	152	Cum
3	2	Excavating trenches of required width for pipe, cables etc including excavation for sockets ,& dressing of sides ,ramming of bottoms ,depth upto 1.5m including getting out the excavated soil,& then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming ,watering, etc and disposing of surplus excavated soil as directed, within lead of 50m.
4	2.01	All kinds of soil.
5	2.02	Pipes, cables etc exceeding 80 mm dia but not exceeding 300 mm dia	212	Cum
6	3	Supplying chemical emulsion in sealed containers including delivery as specified. 2.34.1 Chlorpyriphos/ Lindane emulsifiable concentrate of 20%	500	Litre
7	4	Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor :
8	4.01	Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor : 2.35.3.1 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration	4453.71	sqm
9	5	Earth work in excavation by mechanical means (Hydraulic excavator) /manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.
10	5.01	All kinds of soil	1891.88	cum
11	6	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.	650.45	cum
12	7	Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.	276.31	cum
13	8	Extra for levelling & neatly dressing of disposed soil completely asdirected by Engineer-in-charge.	196.81	cum
14	8.01	CONCRETE WORK
15	9	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
16	9.01	1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)	14	Cum
17	10	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
18	10.01	1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).	608.74	cum
19	10.02	REINFORCED CEMENT CONCRETE
20	11	Centering and shuttering including strutting, propping etc. and removal of form for :
21	11.01	Foundations, footings, bases of columns, etc. for mass concrete.	128.56	sqm
22	11.02	Walls (any thickness) including attached pilasters, butteresses,\nplinth and string courses etc.	531.86	sqm
23	11.03	Suspended floors, roofs, landings, balconies and access\nplatform	4087.7	sqm
24	11.04	Lintels, beams, plinth beams, girders, bressumers and cantilevers.	3389.57	sqm
25	11.05	Columns, Pillars, Piers, Abutments, Posts and Struts	148.12	sqm
26	11.06	Stairs, (excluding landings) except spiral-staircases	353.44	sqm
27	11.07	Weather shade, Chajjas, corbels etc., including edges	132.37	sqm
28	12	Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 6mm nominal size), reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing with cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits.
29	12.01	50 mm thick	239.4	sqm
30	13	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
31	13.01	Thermo-Mechanically Treated bars.	20680.7	kilogram
32	14	Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto floor V level
33	14.01	Thermo-Mechanically Treated bars.	111359	kilogram
34	15	Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately).\n
35	15.01	All works upto plinth level	153.19	cum
36	15.02	All works above plinth level upto floor V level	824.88	cum
37	16	Add or deduct for plaster drip course /groove in plastered surface or moulding to R.C.C. projections.	348.14	metre
38	16.01	BRICK WORK
39	17	Brick work with F.P.S. bricks of class designation 10 in foundation and plinth in:
40	17.01	Cement mortar 1:6 (1 cement : 6 coarse sand)	1066.66	cum
41	18	Half brick masonry with F.P.S. bricks of class designation 75 in superstructure above plinth level up to floor V level.
42	18.01	Cement mortar 1:4 (1 cement :4 coarse sand)	1298.77	sqm
43	19	Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry (with F.P.S. bricks).	1298.77	sqm
44	19.01	MARBLE AND GRANITE WORK
45	20	Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for flooring, staircase treads , riers and landings, kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels.
46	20.01	Granite of any colour and shade
47	20.02	Area of slab upto 0.50 sqm	82.47	sqm
48	21	Extra for providing edge moulding to 18mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.
49	21.01	Granite of any colour and shade	130.35	metre
50	22	Extra for fixing marble /granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete.	130.35	metre
51	23	Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete.	82.47	sqm
52	23.01	WOOD AND PVC WORK
53	24	Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately).
54	24.01	18 mm thick	549.84	sqm
55	25	Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.	224	each
56	26	Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :
57	26.01	250x10 mm	224	each
58	26.02	200x10 mm	224	each
59	27	Providing and fixing 50cm long aluminium kicking plate 100x3.15 mm anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with necessary screws etc. complete.	224	each
60	28	Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
61	28.01	125 mm	448	each
62	28.02	100 mm	20	each
63	29	Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.
64	29.01	Twin rubber stopper	224	each
65	30	Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles for aluminium door with necessary screws etc. complete ( best make of approved quality)	120	each
66	31	Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealant shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be\nacceptable.
67	31.01	Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension . (Area of window above 1.75 sqm upto 2.50 sqm).	479.92	sqm
68	32	Providing and fixing factory made uPVC white colour sliding glazed door comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately).\nNote: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.
69	32.01	Two track two panels sliding door made of (big series) frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate imension. (Area of door above 2.00 sqm upto 5.00 sqm)	1014.95	sqm
70	33	Providing and fixing stainless steel (SS-304 grade) friction hinges to the side/ top hung uPVC windows, of approved quality, with necessary stainless steel screws etc. as per direction of Engineer-in-charge.
71	33.01	300 x 19 x 1.9 mm	1192	each
72	34	Providing and fixing casement handle made of zinc alloyed (white powder coated) for uPVC casement window with necessary screws etc. complete.	596	each
73	35	Providing and fixing zinc alloyed (white powder coated) touch lock for uPVC sliding window with necessary screws etc. complete.	298	each
74	36	Providing and fixing steel roller for uPVC sliding window with necessary screws etc. complete.	596	each
75	37	Providing and fixing steel roller for uPVC sliding door with necessary screws etc. complete.	282	each
76	38	Providing and fixing steel (white power coated) crescent lock for uPVC sliding window/ door with necessary screws etc. complete.	439	each
77	38.01	STEEL WORK
78	39	Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
79	39.01	In gratings, frames, guard bar, ladder, railings, brackets, gates\nand similar works	14830.6	Kg
80	40	Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).	675.38	Kg
81	40.01	FLOORING
82	41	Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
83	41.01	25 mm thick	2348.3	sqm
84	42	Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.	323.03	sqm
85	43	Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.	2060.69	sqm
86	44	Providing and laying rectified ceramic glazed tiles 300 x300 mm or more (thickness to be specified by the manufacture) of 1st quality conforming to IS :15622 of approved make and all colour and shades except white, Ivory, Grey, Fume, Red brown laid on 20mm thick cement morter 1:4 (1cement : 4coarse sand) including pointing the joint with white cement and matching pigments etc. complete	531.73	sqm
87	45	Providing and laying Vitrified floor tiles in different sizes (thickness to be specified by the manufacture) with water absorption less then 8% and conforming to IS :15622 of approved make and colour and shades laid on 20mm thick cement morter 1:4 (1cement : 4coarse sand) including grouting the joint with white cement and matching pigments etc. complete size of Tile 100 cm x 100 cm	1941.68	sqm
88	45.01	ROOFING
89	46	Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.	161	each
90	47	Providing and fixing GI Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing ‘C’ wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre, suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of GI steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip in tiles into spring ‘T’ with :
91	48	GI Metal Ceiling Clip in plain Beveled edge global white color\ntiles of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation.	50	sqm
92	48.01	FINISHING
93	49	15 mm cement plaster on the rough side of single or half brick wall\nof mix :
94	49.01	1:4 (1 cement: 4 fine sand)	546.52	sqm
95	50	Finishing walls with textured exterior paint of required shade :
96	50.01	New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm	546.52	sqm
97	51	Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :
98	51.01	Two or more coats applied on walls @ 1.25 ltr/10 sqm over and\nincluding one coat of Special primer applied @ 0.75 ltr / 10 sqm	10892.3	sqm
99	52	Applying priming coat :
100	52.01	With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works	113.56	sqm
101	52.02	With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat)	113.56	sqm
102	53	Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.
103	53.01	On steel work	113.56	sqm
104	54	Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
105	54.01	Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture	1341.48	sqm
106	55	Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ perlite respectively conforming to IS: 2547 (Part - 1 & II) 1976, applied on hacked / uneven background such as bare brick/ block/ RCC work on walls & ceiling at all floors and locations, finished in smooth line and level etc. complete.	10892.3	sqm
107	55.01	ROAD WORK
108	56	Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having water absorption less than 0.5% and conforming to IS: 15622, of approved make in all colours and shades in outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.	34.95	sqm
109	56.01	SANITARY INSTALLATIONS
110	57	Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
111	57.01	Flexible pipe
112	57.02	32 mm dia	106	each
113	58	Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40mm long screws, rawl plugs etc. complete.	78	each
114	58.01	WATER SUPPLY
115	59	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.\r\nConcealed work including cutting chases and making good the walls etc.,
116	59.01	20 mm nominal outer dia .Pipes.	1399	metre
117	59.02	25 mm nominal outer dia .Pipes.	700	metre
118	60	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.
119	60.01	20 mm nominal outer dia .Pipes.	120	metre
120	60.02	25 mm nominal outer dia .Pipes.	100	metre
121	60.03	32 mm nominal outer dia .Pipes.	100	metre
122	60.04	40 mm nominal outer dia .Pipes.	400	metre
123	60.05	50 mm nominal outer dia .Pipes.	180	metre
124	61	Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
125	61.01	Circular tank	60000	Per liter
126	62	Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.	78	each
127	63	Cutting holes upto 30x30 cm in walls including making good the same :
128	63.01	With common burnt clay F.P.S. (non modular) bricks.	75	each
129	63.02	D R A I N A G E
130	64	Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipesincluding bed concrete as per standard design:
131	64.01	250 mm diameter S.W. pipe	565	meter
132	65	Providing and fixing square-mouth S.W. gully trap class SP1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design :
133	65.01	150 x 100 mm size P type.
134	65.02	With sewer bricks conforming to IS : 4885	40	each
135	66	Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead anddisposal of unserviceable materials into municipal dumps:
136	66.01	150 mm diameter	10	meter
137	67	Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand), in side cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :
138	68	0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) :
139	68.01	With common burnt clay F.P.S. (non modular) bricks of class designation 7.5	26	each
140	69	Constructing brick masonry circular manhole 1.22 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :
141	69.01	With common burnt clay F.P.S. (non modular) bricks of class designation 7.5	22	each
142	70	Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design :
143	70.01	With 20x20 mm square bar	110	each
144	71	Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality
145	71.01	Square shape 450 mm internal dimensions	64	each
146	72	Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Raising depth of manhole to be paid separately) :
147	72.01	Rectangular manhole 90x80 cm with rectangular cover 600x450 mm of grade LD - 2.5	3	each
148	72.02	Circular manhole 140 cm dia with circular cover 600 mm dia of grade EHD - 35	50	each
149	73	Constructing brick masonry road gully chamber 45x45x77.5 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand ) with precast R.C.C. vertical grating complete as per standard design :
150	73.01	With common burnt clay F.P.S. (non modular) bricks of class designation 7.5	64	each
151	73.02	ALUMINIUM WORK
152	74	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and paneling to be paid for separately) :
153	74.01	Powder coated aluminium (minimum thickness of powder coating 50 micron)	4643.31	kg
154	75	For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required (Fittings shall be paid for separately).
155	75.01	Powder coated aluminium (minimum thickness of powder coating 50 micron)	2995.12	kg
156	76	Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) :
157	76.01	With float glass panes of 5.50 mm thickness	1062.63	sqm
158	76.02	WATER PROOFING
159	77	Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry	531.73	Sqm
160	78	Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to\nIS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge :
161	78.01	With average thickness of 120 mm and minimum\nthickness at khurra as 65 mm.	1581.58	Sqm
162	78.02	RAIN WATER HARVESTING & TUBEWELLS
163	79	Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level.
164	79.01	All types of soil 300 mm Dia	240	meter
165	80	Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.
166	80.01	200 mm nominal size dia	120	meter
167	81	Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.
168	81.01	200 mm nominal size dia	120	meter
169	82	Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.	24.52	Cum
170	83	Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.	24.52	Cum
171	83.01	NON DSR ITEMS (Civil)
172	84	Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor five level.Masonry work (first sort) , in cement mortar 1:6 (1 cement : 6 coarse sand)	1005.34	Sqm
173	85	Brick work with common burnt clay selected F.P.S. (non modular) bricks of class designation 10 in exposed brick work including making horizontal and vertical grooves 10mm wide 12 mm deep complete in cement mortar 1:6 (1 cement :6 coarse sand).
174	85.01	Above plinth level upto floor V level	1156.31	cum
175	86	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 10 in superstructure above plinth level up to floor V level in all shapes and sizes in :
176	86.01	Cement mortar 1:6 (1 cement : 6 coarse sand)	371.95	cum
177	87	Providing and laying glass tiles with 1:3 cement mortar directions of engineer-in-charge	129.9	Sqm
178	88	Providing and laying Mandana stone laid on 20 mm (average) thick cement mortar 1:4 (1 cement: 4 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.	705.8	Sqm
179	89	Providing and Fixing M.S Pergola with 6 mm th. M.S sheet CNC cut perforation as/design perforation site covered by 3 mm M.S sheet as per approved design including all fittings directions of engineer-in-charge	276.22	Sqm
180	90	Providing and Fixing 80 th. Sandwitch PUF Panel as per approved design including all fittings directions of engineer-in-charge	584	Sqm
181	91	All primary members (Columns & Rafters) would be fabricated from Plates having minimum yield strength of 240/345Mpa. And will conform to ASTM-A-572 Standard. The primary members would be fabricated by continuous shop automated welding using submerged arc welding. Primary members fabricated from plate will have flanges and webs jointed one side alternate on either side of the web by a continuous welding process. All primary members shall have one coat of primer. including all fittings directions of engineer-in-charge	13393.5	Kg
182	92	The secondary members consist of Z-Purlins and eave struts coated with one coat of primer would be of Cold formed steel having minimum yield strength of 250/320 Mpa and would conform to IS 2062. including all fittings directions of engineer-in-charge	2343.87	Kg
183	93	Supplying, filling, spreading & leveling Pea gravels in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction\nof Engineer-in-charge.	24.52	cum
184	94	Supply of earth by mechanical transport including royality, excavation, loading, unloading and banking the same in layer not exceeding 20 cm in depth, breaking clodss, watering, rolling each layer with 1/2 tonne roller or wooden or steel rammers and rolling each layer with vibratory power roller of minimum 8 tonnes and dressing up with proper chamber for roads including filling up ground depressions with 30 km lead and lift upto 1.5 m : (Rolling by means of compactor (where 8 tonne roller can not be used) to achieve the require DBD shall also be the apart the item).	1643.52	cum
185	94.01	NON DSR ITEMS (Plumbing)
186	95	Desilting of gully grating chamber including taking out garvage/malba and stacking with in a lead of 50 meter as per direction of engineer-in-Charge	3	each
187	96	Cleaning of manholes complete including pumping out water and taking all safety measures for gases and taking out sludge and stacking with in a lead of 50 meter and taking necessary safety measures as per direction of Engineer-in-Charge	3	each
188	97	Cleaning of existing chowked sewer line including removing malba/sludge from the line including testing the line after cleaning and disposal of the collected malba as per direction of Engineer-in-charge	35	metre
189	98	Cleaning of existing storm water drain including removing malba/sludge upto a lead of 50 meter lead as per direction of Engineer-in-charge	35	metre
190	99	Providing and fixing CPVC gate valve of approved quality
191	99.01	25 mm nominal bore	15	each
192	99.02	32 mm nominal bore	15	each
193	99.03	40 mm nominal bore	15	each
194	100	Providing and fixing CPVC non- return valve of approved quality
195	100.01	40 mm nominal bore
196	100.02	Horizontal	15	each
197	100.03	Vertical	15	each
198	101	Providing and fixing uplasticised PVC connection pipe with brass unions :
199	101.01	45 cm length
200	101.02	25mm nominal bore	30	each
201	101.03	32 mm nominal bore	30	each
202	101.04	40 mm nominal bore	30	each
203	101.05	50 mm nominal bore	20	each
204	102	Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for soil, waste and vent & rain water, Type-B as per IS13592 : suitable for rubber ring joints, including all neccessary specials and fittings (confirming to IS:) i.e. bends, tees, junctions (with or without doors), reducers, couplers, cowls, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc. including chase cutting,cutting of RCC slab as required, excavation and back filling in all kind of soils, suspended from floor under false ceiling including cost of shuttering for proper completion of the work, breaking and making good the walls and floors etc. after pipes have been duly laid and tested.
205	102.01	The Pipes will be supported with threaded G I rods & clamps on 50x50x5 mm slotted angle. The cost will include all support arrangements. The work includes commissioning of all pipes lines as per drawings and specifications and as directed by engg-in-charge at site.-Supreme/Prince make.
206	102.03	110 mm outer dia	1451	Rm
207	103	Providing fixing, jointing and testing in position the following UPVC pipes (working pressure 10 kg/sqcm) conforming to IS: 4985 for drainage cut to required lengths including all necessary fittings and specials such as bends, junctions, offsets, making proper connections. Including providing PCC thrust block at 2 mtr. centre to centre. Pipe to be laid below ground level in trenches upto required depth including excavation in all kind of soil, dewatering, refilling, watering, ramming & removing the surplus excavated material and making good the same complete as required. Make - Supreme/ Polypack
208	103.01	110 mm dia.	100	Rm
209	103.02	160 mm dia.	80	Rm
210	103.03	200 mm dia.	315	Rm
211	103.04	250 mm dia	250	Rm
212	104	Providing & Fixing Towel Rack 600 mm long without lower hangers but with three hooks as per direction of Engineer-in-Charge Code : ACN-1181FHN Jaquar	78	Nos.
213	105	Providing & Fixing Soap Dispenser with glass bottel as per direction of Engineer-in-Charge Code: AKP-35735P Jaquar	78	Nos.
214	106	Providing & Fixing Towel Ring Round as per direction of Engineer-in-Charge Code: AKP- 35721P) Jaquar	78	Nos.
215	107	Providing and fixing CP grating of approved quality as per direction of Engineer-in-Charge.Circular type.100 mm nominal dia.	267	Nos.
216	108	Providing and fixing Overhead Shower ( jaquar Code - OHS-1995)	70	Nos.
217	109	Providing & fixing Long body Bib Cock with wall flange (Make :- jaguar Con-107 KN )	218	each
218	110	Providing & fixing Angular Stop Cock with nuts, washer with C.P. brass flange complete, including cutting and making good the walls, wherever required. Regular body with adjustable wall flange (Make :- jaguar Con-059 KN )	288	each
219	111	Providing & fixing Concealed Stop Cock with nuts, washer with C.P. brass flange complete, including cutting and making good the walls, wherever required. Regular body with adjustable wall flange (Make :- jaguar Con-089 KN )	140	each
220	112	Providing & fixing Basin with provision also of all accessories required for installation and testing (Brand- Hindware Star white )	78	each
221	113	Providing & fixing Pillar Cock Long (Make :- Jaquar Code CQT-23011 )	78	each
222	114	Providing & fixing Urinal with provision also of all accessories required for installation and testing (Make :- Hindware catalogue no. 60002 FB- Large standard urinal star white )	8	each
223	115	Providing & fixing 10 Lit. Auto flush Urinal cistern with provision also of all accessories required for installation and testing	8	each
224	116	Providing & fixing Wall-hung European type water closet with provision also of all accessories required for installation and testing (Brand- Hindware Catalogue no 20061 Star white wall mounted closet)	78	each
225	117	Providing & fixing Concealed Cistern with Chrome Plate Brand Viega
226	117.01	Supply only, handling, fixing ,testing and all accessories required for installation.	78	each
227	118	Providing & fixing stainless steel sink of size 1120mm x 510mm x 229 mm with 2 bowl with provision also of all accessories required for installation and testing and including cutting and making good the walls wherever required as per direction of Engineer-in-charge.	23	each
228	119	Providing & fixing stainless steel sink of size 838mm x 559mm x 229 mm with 1 bowl with provision also of all accessories required for installation and testing and including cutting and making good the walls wherever required as per direction of Engineer-in-charge.	3	each
229	120	Providing & fixing wall mounted C.P. Sink Mixer with swinging spout complete, including cutting and making good the walls wherever required. (Make :- Jaquar- CON- 309 KN )
230	120.01	Supply only , handling, fixing with provision also of all accessories required for installation and testing	20	each
231	121	Providing and fixing 5.5 mm thk. Mirror mounted on S.S Stud	126.36	sqm
232	122	Supply installation testing and commissioning R.O.water purifier (Kent Grand 8 L RO + UV +UF Water Purifier (White)	24	Each
233	123	Supplying, installing, testing & commissioning of Domestic Water Lifting Pumps to feed Overhead Tank. (1HP) including all fittings as per direction of Engineer-in-charge.	3	each
234	123.01	ELECTRICAL WORK
235	123.02	Sub Head:-A (Internal Wiring)
236	124	Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc. as required.
237	124.01	Group C	1468	Point
238	125	Wiring for twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit, 2 way modular switch,modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required	40	Point
239	126	Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required
240	126.01	3 x 1.5 sq.mm	1900	Meter
241	126.02	6 x 1.5 sq.mm	550	Meter
242	126.03	9 x 1.5 sq.mm	7180	Meter
243	126.04	3 x 2.5 sq.mm	1150	Meter
244	126.05	6 x 2.5 sq.mm	670	Meter
245	126.06	3 x 4 sq.mm	1460	Meter
246	126.07	6 x 4 sq.mm	1050	Meter
247	126.08	3 x 6 sq.mm	2250	Meter
248	127	Supplying and drawing following pair, 0.5 sq.mm FR PVC insulated copper conductor, unarmoured telephone cable in the existing surface/ recessed steel/ PVC conduit as required
249	127.01	2 Pair	1350	Metre
250	127.02	4 Pair	450	Meter
251	128	Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.	1100	Meter
252	129	Supplying and fixing of following sizes of medium classPVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
253	129.01	20mm	5850	Metre
254	129.02	25 mm	6700	Metre
255	129.03	32 mm	670	Meter
256	130	Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
257	130.01	15/16 amp switch	1830	each
258	130.02	6 pin 15/16 amp socket outlet	873	each
259	130.03	Telephone socket outlet	34	each
260	130.04	TV antenna socket outlet	34	Each
261	130.05	Bell Push	14	Each
262	131	Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required	214	Each
263	132	Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required.
264	132.01	1 or 2 Module (75mm x 75mm)	873	Each
265	132.02	8 Module (125mm x 125mm)	150	Each
266	132.03	12 Module (200mm x 150mm)	50	Each
267	133	Supplying and fixing following Modular base & cover on existing modular metal box etc. as required
268	133.01	1 or 2 Module	873	Each
269	133.02	8 Module	150	Each
270	133.03	12 Module	50	Each
271	134	Supplying and fixng 3 pin, 5 amp. Ceiling rose on the existing junction box/ wooden bolock including connection etc. as required.	140	Each
272	135	Erection of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS lamps per fitting, complete with all\naccessories including connection etc. as required.	1200	Each
273	136	Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all tyes, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq.mm FR PVC insulated, coppere conductor,single core cable and earthing etc. as required.	1200	Each
274	137	Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated, copper conductor, single core cable etc. as required.	214	Each
275	138	Installation of exhaust fan upto 450 mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage, connection, testing, commissioning etc. as required.( Up to 450mm sweep)	106	Each
276	139	Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.	106	Each
277	139.01	MCCB, MCB & DB'S
278	140	Supplying and fixing follwing way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper busbar, neutral busbar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator).
279	140.01	2+12 way, Double door	12	Each
280	141	Supplying and fixing following way, prewired, TP&N MCB distribution board, of steel sheet for 415 volts, on surface/ recess, complete with loose wire box, terminal connectors for all incoming and outgoing circuit, duly prewired with suitable size FR PVC insulated copper conductor up to terninal bocks, tinned copper busbar, neutral link, earth bar, din bar, detachable gland plate, interconnection, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator).
281	141.01	8 Way (4+24),Double Door.	24	Each
282	141.02	12 Way (4+36) Double Door	12	Each
283	142	Supplying and fixing 5 amps ot 32 amps rating, 240 volts, 'B' series, miniature circuit breaker suitable for lighting and other load of following poles in the exisiting MCB DB complete with connections, testing and commissioning etc. as required.
284	142.01	Single pole	170	Each
285	143	Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
286	143.01	40 amps	90	Each
287	144	Supplying and fixing following rating, four pole,415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
288	144.01	63 amps	24	Each
289	144.02	CABLE TRAYS
290	145	Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.
291	145.01	100 mm width X 50 mm depth X 1.6 mm thickness	110	Meter
292	145.02	150 mm width X 50 mm depth X 1.6 mm thickness	60	Meter
293	145.03	300 mm width X 50 mm depth X 1.6 mm thickness	110	Meter
294	145.04	600 mm width X 50 mm depth X 2.0 mm thickness	60	Meter
295	145.05	EARTHING
296	146	Earthing with G.I. earth pipe 4.5 mtr long, 40 mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with without charcoal/coke and salt as required.	15	Set
297	147	Earthing with copper Earth plate 600mmx600mmx3mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc.with charcol/coke and salt as reqd.	5	Set
298	148	Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required	75	Mtr
299	149	Providing and and fixing 6 SWG dia G.I wire on surface or in recess for loop earthing along with existing surface / recessed conduit / submain wiring / cable as required.	200	Mtr
300	149.01	MV CABLE LAYING
301	150	Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
302	150.01	Upto 35 sq. mm	140	Meter
303	150.02	Above 35 sq. mm and upto 95 sq. mm	80	Meter
304	150.03	Above 95 sq. mm and upto 185 sq. mm	12	Meter
305	151	Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/HUME/ METAL pipe as required.
306	151.01	Above 185 sq. mm and Upto 400 sq.mm	350	Meter
307	152	Laying and fixing of one number PVC insulated and PVC\nsheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.
308	152.01	Upto 35 sq. mm (clamped with 1mm thick saddle)	350	Meter
309	153	Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)	350	Meter
310	154	Above 95 sq. mm and upto 185 sq. mm (clamped with\n25/40x3mm MS flat clamp)	250	Meter
311	155	Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required
312	155.01	Upto 35 sq. mm	350	Meter
313	156	Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.
314	156.01	Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp)	125	Meter
315	156.02	MV CABLE JOINTING & END TERMINATION
316	157	Supply and making end termination with brass compression gland and aluminium/copper lugs for following size of PVC insulated and PVC sheated/XLPE aluminium/copper conductor cable of 1.1KV grade as required.
317	157.01	4C x 25 Sq.mm Aluminium armoured	16	Each
318	157.02	4C x 35 Sq.mm Aluminium armoured	20	Each
319	157.03	3.5C x 50 Sq.mm Aluminium armoured	10	Each
320	157.04	3.5C x 70 Sq.mm Aluminium armoured	8	Each
321	157.05	3.5C x 185 Sq.mm Aluminium armoured	8	Each
322	157.06	3.5C x 240 Sq.mm Aluminium armoured	8	Each
323	158	Supplying of following sizes PVC insulated and PVC sheathed power cable of 1.1 KV grade armouret L.T cable as required conforming to IS:1554/IS-7098 ( Part-I ) 1998 as reqd at site.
324	158.01	4C x 25 Sq.mm Aluminium armoured	350	Meter
325	158.02	4C x 35 Sq.mm Aluminium armoured	450	Meter
326	158.03	3.5C x 50 Sq.mm Aluminium armoured	350	Meter
327	158.04	3.5C x 70 Sq.mm Aluminium armoured	250	Meter
328	158.05	3.5C x 185 Sq.mm Aluminium armoured	125	Meter
329	158.06	3.5C x 240 Sq.mm Aluminium armoured	70	Meter
330	159	Supplying and drawing co- axial TV cable RG-11 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinnned copper braid and protected with PVC sheath in the existing surface/recessed steel/PVC conduit as required.	200	Meter
331	160	Supply and fixing modular type A/C box complete with 16amp socket outlet 6 to 32 amp SPMCB, cover plate,connection testing and fixing etc as reqd	92	Each
332	161	Fabrication,Supplying,testing, installation and commissioning of well/ floor mounted cubical panel board/feeder piller duly made out of 2 mm thick (M.S) fully compartmentalized having 200 amps.4 strip aluminium bus bar,interconnection earthing etc. complete as reqd.(Up to 350mm deep)	15	Sq.Mtr
333	162	Supplying and fixing following accessories in the existing panel board complete with connection etc as reqd.
334	162.01	400 amp TPMCCB (GE/L&T)	3	Each
335	162.02	250 amp TPMCCB (GE/L&T)	12	Each
336	162.03	200 amp TPMCCB (GE/L&T)	3	Each
337	162.04	125 amp TPMCCB (GE/L&T)	25	Each
338	162.05	Digital Voltmeter (0-500)	15	Each
339	162.06	Digital Ammeter (0-20)	12	Set
340	162.07	Voltmeter S/S	12	Set
341	162.08	Ammeter S/S	12	Set
342	162.09	Indicating Lamp set.(LED Type)	12	Set
343	162.1	CT'S 400/5 Amp	3	Each
344	162.11	CT'S 250 /5 Amp	12	Each
345	162.12	Sub Head:-B (FITTING & FIXTURE)
346	162.13	Supply of mattt finish Horizantal Downlignter 2 X 18 Watt with white powder coated CRCA ring,matt finish aluminium reflector wired with commericial HF ballast without lamp complete accessories in all respect at site.\nBajaj :- BJDR 218 H MFW2EB\n	768	Each
347	163	Supply of Wall mounted MIRROR Luminaire suitable for 1 x 18 watt CFL lamp complete as required. ( Philips make ) cat no. FMS 200/111	78	Each
348	164	Supply of BULKHEAD Luminaire with toughened frosted glass suitable for 1 no 9 watt CFL lamp complete as required. ( Philips make ) cat no FXC 101	116	Each
349	165	Supply of lamps for as above fitting complete in all respect at the site..(Make-:Philips/Bajaj/Wipro)
350	165.01	18 Watt CFL Lamp	1216	Each
351	166	Supply of following size of A.C. exhaust fan Size of 300 mm,900RPM single phase heavy duty complete with motor, blade fan and cover complete accessories in all respect.(Make:- Khaitan/Bajaj/Usha)	106	Each
352	167	Supply of 1200mm sweep A.C electric ceiling fan,capicitor type double ball bearing complete with 300mm down rod. Canopies,shackles,blades,but without regulator suitable for operation on 230/240 volts,50Hz,single phase,A.C.supply etc as reqd. (Make-:Bajaj/Usha/Khaitan)	214	Each
353	168	Supplying of 250 mm ( 10\" ) Fresh Air wall fan complete with motor, blade, frame etc as required.	15	Each
354	169	Supply and fixing RJ-45 Computer jack socket for computer LAN point on the existing with modular plate and swith box including connection and testing in all respect at site.	32	Each
355	170	Supply and drawing of following size Cat-06 cable FR PVC insulated copper conductor LAN Cat-06 cable in the existing surface/recess steel/PVC conduit as reqd.	500	Meter
356	170.01	Sub Head C :- (LAN WIRING)
357	171	Supply and fixing of Cat 6,Jack White complete in all respect at site.	32	Each
358	172	Supply and fixing of Single port British Style faceplate white (with box) complete in all respect at site.	32	Each
359	173	Supply and fixing of Giga,24 port Jack Panel (Cat-6) complete in all respect at site.	32	Each
360	174	Supply and fixing of Mounting Cord 7 ft Cat 6 complete in all respect at site.	32	Each
361	175	Supply and fixing of Mounting Cord 4 ft Cat 6 complete in all respect at site.	32	Each
362	176	Supply and fixing of 48 port managed switch gigabit SG300 complete in all respect at site.	2	Each
363	177	Supply and fixing of 42U floor standing rack with 230 volt AC fan-4d cable manager-9 12 port PDU,HW-5Pkt,Castor Set complete in all respect at site.	2	Each
364	178	Installation Chages of as above work.(Item No 1 to 7) complete in all respect at site.	1	L.S
365	178.01	Sub Head D:-STREET LIGHTING
366	179	Supply installation, wiring, connection, testing & commissioning of external boundary lighting system conforming to the technical specifications and drawings. The work will comprise of:
367	179.01	9meter long MS tubular pole along with 1.5m over hang. Weighing 123Kgs as per I.S:2713-1980 part-I & II. Fixtures will come at top of the pole along with reducer along with base plate of 300mmx300mmx6mm at bottom.
368	179.02	Mounting by welding the junction box on the pole.
369	179.03	Digging for making foundation of the pole.
370	179.04	Erecting the pole by grouting in concrete foundation (The civil construction materials are the part of the supply against this assignment) made out of 1:3:6 mixture of cement concrete.
371	179.05	Mounting junction box with connecting strip with 2pole MCB and arrangement for terminating incoming and outgoing three phases cable along with loop in loop out arrangement.
372	179.06	Suitable adopter for street light fixture or approved equal on the pole top
373	179.07	Connecting the fixture by using 3c*2.5mm PVC flexible copper wires of colour green, red and black from the junction box to fixture at pole top.
374	179.08	Testing the connections and completing the installation.
375	179.09	Providing two numbers 38m GI Pipe for incoming and outgoing cables from cable laying depth to junction box.
376	179.1	Painting the pole with two coats of red oxide and afterward two coats of aluminum paint
377	179.11	The incoming cable work, outgoing cable work & the earthing of poles are covered under the cabling, earthing head.	3	Each
378	179.12	SUPPLY OF OUTDOOR FIXTURES
379	180	Supply of the following streetlight fixtures complete with control gear balasts, p.f. capacitors control gear box and SON lamps.
380	180.01	Philips Cat No. SRP 601/250 with 250W SON Lamp	15	Each
381	180.02	ERECTION OF OUTDOOR FIXTURES
382	181	Erection street lighting fixture having 250W, sodium vapout lamp in die cast aluminium housing having an acrylic cover for satisfactory operation in the open.	10	Each
383	182	Supplying, Laying of Hume pipe 300mm dia at crossing of road as per standard practice of putting cement mortor and covering with the excavated earth	50	Meter
384	182.01	Sub Head E:-SAFETY EQUIPMENT
385	183	Supplying and erection of the following equipment at suitable place in the building as required :-
386	183.01	4 nos. of M.S bucket of 20 liters capacity with red oxide paint & lettered as \" Fire \" with White and Red mounted on free standing stand, as required including filling with dry SAND.	2	Set
387	183.02	First aid box as approved by St. John Ambulance Bridge	2	Each
388	183.03	Shock treament chart	2	Each
389	183.04	Rubber Mat 914.4 mm wide and 12 mm thick	4	Meter
390	183.05	Rubber Mat 914.4 mm wide and 6 mm thick	12	Meter
391	183.06	Sub Head F:-FIRE FIGHTING SYSTEM
392	184	Providing and fixing standard firemans axe with heavy rubber handle.	8	Each
393	185	Providing and fixing Fire Extinguishers (A, B, C type powder) complete with all accessories as per manufacturers specifications.
394	185.01	Capacity 5 Kg	4	Each
395	185.02	Capacity 4.5 Kg	4	Each
396	185.03	Capacity 9 Kg	1	Each
397	186	Providing and fixing signages printed on photoluminescent U1000 aluminium sheet of 1.0 mm (+ -10%) containing lumigen II as base chemical, covered under UV stablized coating and of appropriate size (Glo-lite or eq. Make) including fixing on wall, door, ceiling etc. with proper clamps, hangers, cleats anchor fasteners etc. complete in all respacts as diercted by Engineer-in-charge.	350	Sq.Inch
398	186.01	Sub Head G:-(Fire Detection Work)
399	187	Supplying, fixing, testing and commissioning photoelectric type smoke detector.	100	Each
400	188	Supplying, fixing, testing and commissioning fixed temperature-cum-Rate of Rise type heat detectors.	100	Each
401	189	Supplying, fixing, testing and commissioning flush type response indicator with red coloured LED Lamp.	10	Each
402	190	Supplying, fixing, testing and commissioning manual break glass units alongwith chain and hammer.	14	Each
403	191	Supplying, fixing, testing and commissioning electronics hooters.	14	Each
404	192	Supplying, installing, testing and commissioning 20 zone Control Panel with zone indication. The panel shall include solid state circuits, battery charger, batteries etc. and fire/fault/test positions selector switches, zone isolation facility etc. complete.	1	Each
405	193	Supplying, fixing, testing and commissioning FRLS PVC insulated 2x1.5 Sq.mm copper conductor unarmoured cable ISI marked	800	Meter
406	193.01	SUB-HEAD H:AIR CONDITIONER WORK.
407	194	Supplying, installation, testing & commissioning of Aircooled Split Air-conditioners each comprising an outdoor unit consisting of Rotary Compressor, Condensor fan,etc. with outer casing and indoor Hi-wall Type 1.5 TR unit consisting of blower, filter, motoretc. having specified CFM 230+/_10% ,1-50 Hz alongwith cordless remote, (R-22) 1.5 TR with BEE 4 star rating.	80	Each
408	195	Supplying, installation, testing & commissioning of Aircooled ceiling concealed Air-conditioners each comprising an outdoor unit consisting of Rotary Compressor, Condensor fan,etc. with outer casing and indoor ceiling concealed type 2.0 TR unit consisting of blower, filter, motoretc. having specified CFM 630+/_10% ,1-50 Hz alongwith cordless remote, (R-22 refrigerant) 2.0 TR with BEE 4 star rating.	12	Each
409	196	Installation charges for 1.5 TR Hi-wall type Airconditioner	80	Each
410	197	installation charges for 2.0 TR Ceiling concealed type Airconditioner	12	Each
411	198	Soft Copper Pipe 1/2\"& 1/4\" having thickness of .8 mm for 1.5 TR AC units	240	Rmtr
412	199	Soft Copper Pipe 1/2\"& 3/4\" having thickness of 1.0 mm for 2.0 TR AC units	24	Rmtr
413	200	4 c (1.5mm) electrical wiring from indoor to outdoor unit (BIS)	800	Rmtr
414	201	3 c (2.5 sqmm) Electrical wiring from MCB to outdoor units (BIS)	420	Rmtr
415	202	6 sq mm Electrical wiring from MCB to outdoor units as / BIS	350	Rmtr
416	203	25 mm Dia. Hard PVC drain pipe	800	Rmtr
417	204	Voltage stabilizers 4 KVA for 1.5 TR A/C	92	Each
418	205	M.S. angle stand for outdoor units	92	Each
419	206	Supply and fixing of Gyeaser/ water heater 25 Ltrs capicity complete as read (Make:-Hevells - WB025 or eqvialent Recold/Smith)	50	Nos
420	207	Add cost index for civil DSR items @12.75% on Rs. 61926258	6.19263e+07	each
421	208	Less @ 9.5% on DSR items Rs. 61926258	6.19263e+07	each
422	209	Add cost index for electrical DSR items @12.75% on Rs. 6466580	6.46658e+06	each
423	210	Less @ 9.5% on electrical DSR items Rs. 6466580	6.46658e+06	each

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Delhi Tenders

Construction Tenders

Civil Construction Tenders

Civil Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Construction Of Half Way Long Stay Homes At Ihbas Delhi, Executive Engineer (Civil) Ihbas, Dilshad Garden-Delhi

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Construction Of Half Way Long Stay Homes At Ihbas Delhi, Executive Engineer (Civil) Ihbas, Dilshad Garden-Delhi

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us