Construction Of New School Building For Science Lab . And Additional Class Rooms At Tilthai R . C . H . S . School , Jubarajnagar Block , North Tripura District
Tender Value
69.75 Lakhs
Estimated cost
Bid Submission
18 Oct 2019
0 days left
EMD
1.39 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
North Tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of New School Building For Science Lab . And Additional Class Rooms At Tilthai R . C . H . S . School , Jubarajnagar Block , North Tripura District
BOQ
| Name of Work: Construction of new school building for Science Lab. and Additional Class Rooms at Tilthai R.C. H.S. School, Jubarajnagar Block, North Tripura District. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.\n-All kinds of soil | 2 | 206.37 | Cum |
| 2 | 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.\n-All kinds of soil | 3 | 221.07 | Cum |
| 3 | 3 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. | 4 | 89.46 | Cum |
| 4 | 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and\nshuttering -\n-All work upto plinth level: | 5 | 42.94 | Cum |
| 5 | 5 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of\ncentring, shuttering, finishing and reinforcement-\n-All work upto plinth level: 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone\naggregate 20 mm nominal size) | 6 | 59.89 | Cum |
| 6 | 6 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five\nlevel excluding cost of centring, shuttering, finishing and reinforcement- In plinth and skirting courses, fillets, columns, pillars, posts and struts. 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) | 7 | 10.23 | Cum |
| 7 | 7 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement- RCC work in suspended floors, roofs having slope upto 15° landings, balconies, shelves and chajjas.. 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) | 8 | 33.88 | Cum |
| 8 | 8 | RCC work in beams, lintels, bands, plain window sills, staircases and spiral staircases excluding precast spiral staircase. 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) | 9 | 24.24 | Cum |
| 9 | 9 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto floor five level. Thermo-Mechanically Treated bars/ Cold twisted deformed steel bars | 10 | 14977.8 | Kg |
| 10 | 10 | Centering shuttering including struttings, propping etc. and removal of form work for: Foundations, footings, bases for columns etc. for mass concrete with timber plank | 11 | 49.32 | Sqm |
| 11 | 11 | Suspended floors, roofs, landings, balconies and access platform with timber planks | 12 | 253.12 | Sqm |
| 12 | 12 | Lintels, beams, plinth beams, girders, bressumers and cantilevers with wooden plank | 13 | 326.45 | Sqm |
| 13 | 13 | Columns, Pillars, Piers, Abutments, Posts and Struts with wooden plank. | 14 | 130.48 | Sqm |
| 14 | 14 | Weather shade, Chajjas, corbels etc., including edges. | 15 | 20.7 | Sqm |
| 15 | 15 | Stairs (excluding landings) except spiral-staircases with wooden plank | 16 | 6.15 | Sqm |
| 16 | 16 | First class brick work in foundation and plinth\nincluding cost of all materials as required complete:- In cement mortar 1:4 ( 1 cement : 4 fine sand ). | 17 | 37.28 | Cum |
| 17 | 17 | First class brick work in superstructure above plinth level & upto floor-five level including cost of all materials as required complete:- In cement mortar 1:4 ( 1 cement : 4 fine sand ). | 18 | 68.45 | Cum |
| 18 | 18 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, & with cleats with bolts & nuts, rivets, locking arrangement, handles, hooks & eyes, pinlets including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required:- Using M.S. angels 40x40x6 mm for diagonal braces. | 19 | 28.08 | Sqm |
| 19 | 19 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm at 100 mm centre to centre and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia. steel pulleys & with riveted bolts, nuts, locking arrangement, stoppers, handles, hold fast /anchor bolt including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required. | 20 | 14.7 | Sqm |
| 20 | 20 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete.Fixed to openings /wooden frames with rawl plugs screws etc. | 21 | 1032.63 | Kg |
| 21 | 21 | Providing and laying cement concrete 1:2:4 (1 cement: 2 fine sand : 4 graded stone aggregate 20 mm nominal size) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips and cost of glass strips etc. complete.40mm thick. | 22 | 82.25 | Sqm |
| 22 | 22 | Providing and laying polished vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08 % and conforming to IS : 15622 of approved make in all colours, shades over 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete. 10.42.2 Size of tile 60x60 cm | 23 | 147 | Sqm |
| 23 | 23 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 ( thickness to be specified by the manufacturer ) of approved make in all colours, shades of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1 : 3 ( 1 cement : 3 fine sand ) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete. | 24 | 2.25 | Sqm |
| 24 | 24 | Providing and fixing precast chequered terrazo tiles 22 mm thick with graded marble chips of size upto 6 mm, laid on floors, footpath & courtyard on 20 mm thick bed\nof cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing\ncomplete.In light shade using white cement | 25 | 23.34 | Sqm |
| 25 | 25 | 12 mm cement plaster of mix. In cement mortar 1 : 4 ( 1 cement : 4 fine sand) | 26 | 462.58 | Sqm |
| 26 | 26 | 15 mm cement plaster on the rough side of single or half brick wall of mix: In cement mortar 1 : 4 ( 1 cement : 4 fine sand ) | 27 | 236.39 | Sqm |
| 27 | 27 | 6 mm cement plaster of mix : In cement mortar 1 : 3 ( 1 cement : 3 fine sand ) | 28 | 279.54 | Sqm |
| 28 | 28 | Neat cement punning. | 29 | 125.59 | Sqm |
| 29 | 29 | Distempering with oil bound washable distemper of approved brand and manufacture and of required shade on new work ( two or more coats ), over and including water thinnable priming coat to give an even shade. [Payment shall be made after submission of Test Certificate issued by the Manufacturer] | 30 | 522.89 | Sqm |
| 30 | 30 | Finishing walls with textured exterior paint of required shade of approved brand and manufacture on new work ( two or more coats applied @ 3.28 litre/10 sqm) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete. [Payment shall be made after submission of Test Certificate issued by the Manufacturer] | 31 | 298 | Sqm |
| 31 | 31 | Painting with synthetic enamel paint ( one or more coats) of required colour of approved brand and manufactureon old work to give an even shade including preparationof surface as required complete as per direction of the Engineer in charge. | 32 | 94.97 | Sqm |
| 32 | 32 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps | 33 | 1 | each |
| 33 | 33 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe. 32 mm dia | 34 | 1 | each |
| 34 | 34 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | 35 | 1 | each |
| 35 | 35 | Providing and fixing collar. 100 mm. Sand cast iron S&S as per IS - 1729. | 36 | 1 | each |
| 36 | 36 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements weighing not less than 106 gms. | 37 | 1 | each |
| 37 | 37 | Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/ cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. : For 100 mm dia. Pipe | 38 | 1 | each |
| 38 | 38 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.\nInternal work - Exposed on wall.15 mm dia. nominal bore | 39 | 10 | Metre |
| 39 | 39 | 25 mm dia. nominal bore | 40 | 6 | Metre |
| 40 | 40 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore | 41 | 1 | each |
| 41 | 41 | Providing and fixing brass bib cock of approved quality : 15 mm nominal bore | 42 | 1 | each |
| 42 | 42 | Providing and fixing brass stop cock of approved quality : 15 mm nominal bore | 43 | 1 | each |
| 43 | 43 | Providing and fixing soil, waste and vent pipes: 100 mm dia. Sand cast iron S&S pipe as per IS: 1729. | 44 | 3 | Metre |
| 44 | 44 | Providing and fixing single equal plain junction of required degree\n100x100x100 mm\nSand cast iron S&S as per IS - 1729 | 45 | 2 | each |
| 45 | 45 | Providing and fixing gun metal non-return valve of approved quality (screwed end): 40 mm nominal bore. Vertical. | 46 | 1 | each |
| 46 | 46 | Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work : 15 mm diameter pipe | 47 | 10 | Metre |
| 47 | 47 | 25 mm diameter pipe | 48 | 5 | Metre |
| 48 | 48 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 40 mm nominal bore | 49 | 1 | each |
| 49 | 49 | Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colours weighing not less than 80 gms. | 50 | 1 | each |
| 50 | 50 | Providing and fixing hand rail using structural steel etc. of approved size by welding etc. to steel ladder railing, balcony railing and staircase railing etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer complete as required:-E.R.W. tubes. | 51 | 205.32 | Kg |
| 51 | 51 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement-In plinth and skirting courses, fillets, columns, pillars, posts and struts. 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) | 53 | 15.91 | Cum |
| 52 | 52 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement-RCC work in suspended floors, roofs having slope upto 15° landings, balconies, shelves and chajjas. 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone\naggregate 20 mm nominal size) | 54 | 37.01 | Cum |
| 53 | 53 | RCC work in beams, lintels, bands, plain window sills, staircases and spiral staircases excluding precast spiral staircase. 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) | 55 | 31.91 | Cum |
| 54 | 54 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto floor five level. Thermo-Mechanically Treated bars/ Cold twisted deformed steel bars | 56 | 10636.6 | Kg |
| 55 | 55 | Centering shuttering including struttings, propping etc. and removal of form work for: Suspended floors, roofs, landings, balconies and access platform with timber planks. | 57 | 287.33 | Sqm |
| 56 | 56 | Lintels, beams, plinth beams, girders, bressumers and cantilevers with wooden plank | 58 | 233.67 | Sqm |
| 57 | 57 | Columns, Pillars, Piers, Abutments, Posts and Struts with wooden plank. | 59 | 185.65 | Sqm |
| 58 | 58 | Weather shade, Chajjas, corbels etc., including edges. | 60 | 6.54 | Sqm |
| 59 | 59 | Stairs (excluding landings) except spiral-staircases with wooden plank | 61 | 6.15 | Sqm |
| 60 | 60 | Half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required complete:- In cement mortar 1:4 ( 1 cement : 4 fine sand ). | 62 | 40.69 | Sqm |
| 61 | 61 | First class brick work in superstructure above plinth level & upto floor-five level including cost of all materials as required complete:- In cement mortar 1:4 ( 1 cement : 4 fine sand ). | 63 | 69.35 | Cum |
| 62 | 62 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, & with cleats with bolts & nuts, rivets, locking arrangement, handles, hooks & eyes, pinlets including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required:- Using M.S. angels 40x40x6 mm for diagonal braces. | 64 | 31.14 | Sqm |
| 63 | 63 | 8.46 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete. Fixed to openings /wooden frames with rawl plugs screws etc. | 65 | 1082.69 | Kg |
| 64 | 64 | Providing and laying cement concrete 1:2:4 (1 cement: 2 fine sand : 4 graded stone aggregate 20 mm nominal size) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips and cost of glass strips etc. complete. 40mm thick. | 66 | 91.7 | Sqm |
| 65 | 65 | Providing and laying polished vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08 % and conforming to IS : 15622 of approved make in all colours, shades over 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete.\n10.42.2 Size of tile 60x60 cm | 67 | 147 | Sqm |
| 66 | 66 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 ( thickness to be specified by the manufacturer ) of approved make in all colours, shades of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1 : 3 ( 1 cement : 3 fine sand ) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete. | 68 | 6.75 | Sqm |
| 67 | 67 | 12 mm cement plaster of mix. In cement mortar 1 : 4 ( 1 cement : 4 fine sand) | 69 | 518.86 | Sqm |
| 68 | 68 | 15 mm cement plaster on the rough side of single or half brick wall of mix: In cement mortar 1 : 4 ( 1 cement : 4 fine sand ) | 70 | 386.83 | Sqm |
| 69 | 69 | 6 mm cement plaster of mix : In cement mortar 1 : 3 ( 1 cement : 3 fine sand ) | 71 | 287.33 | Sqm |
| 70 | 70 | Neat cement punning. | 72 | 52.71 | Sqm |
| 71 | 71 | Distempering with oil bound washable distemper of approved brand and manufacture and of required shade on new work ( two or more coats ), over and including water thinnable priming coat to give an even shade.\n[Payment shall be made after submission of Test Certificate issued by the Manufacturer] | 73 | 858.14 | Sqm |
| 72 | 72 | Finishing walls with textured exterior paint of required shade of approved brand and manufacture on new work ( two or more coats applied @ 3.28 litre/10 sqm) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete. [Payment shall be made after submission of Test Certificate issued by the Manufacturer] | 74 | 386.07 | Sqm |
| 73 | 73 | Painting with synthetic enamel paint ( one or more coats) of required colour of approved brand and manufactureon old work to give an even shade including preparationof surface as required complete as per direction of the Engineer in charge. | 75 | 92.09 | Sqm |
| 74 | 74 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps | 76 | 3 | each |
| 75 | 75 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe. 32 mm dia | 77 | 3 | each |
| 76 | 76 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | 78 | 3 | each |
| 77 | 77 | Providing and fixing collar. 100 mm. Sand cast iron S&S as per IS - 1729. | 79 | 3 | each |
| 78 | 78 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements weighing not less than 106 gms. | 80 | 3 | each |
| 79 | 79 | Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/ cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. :For 100 mm dia. Pipe | 81 | 3 | each |
| 80 | 80 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.\nInternal work - Exposed on wall.15 mm dia. nominal bore | 82 | 30 | Metre |
| 81 | 81 | 25 mm dia. nominal bore | 83 | 15 | Metre |
| 82 | 82 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore | 84 | 3 | each |
| 83 | 83 | Providing and fixing brass bib cock of approved quality : 15 mm nominal bore | 85 | 3 | each |
| 84 | 84 | Providing and fixing brass stop cock of approved quality : 15 mm nominal bore | 86 | 3 | each |
| 85 | 85 | Providing and fixing soil, waste and vent pipes: 100 mm dia. Sand cast iron S&S pipe as per IS: 1729. | 87 | 10 | Metre |
| 86 | 86 | Providing and fixing single equal plain junction of required degree\n100x100x100 mm\nSand cast iron S&S as per IS - 1729 | 88 | 6 | each |
| 87 | 87 | Providing and fixing gun metal non-return valve of approved quality (screwed end): 40 mm nominal bore. Vertical. | 89 | 3 | each |
| 88 | 88 | Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work : 15 mm diameter pipe | 90 | 30 | Metre |
| 89 | 89 | 25 mm diameter pipe | 91 | 15 | Metre |
| 90 | 90 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 40 mm nominal bore | 92 | 3 | each |
| 91 | 91 | Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colours weighing not less than 80 gms. | 93 | 3 | each |
| 92 | 92 | Providing and fixing hand rail using structural steel etc. of approved size by welding etc. to steel ladder railing, balcony railing and staircase railing etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer complete as required:-E.R.W. tubes. | 94 | 94.4 | Kg |
AI Tender Summary
Tender Timeline
Sep 23, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedOct 18, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 19, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender