Supply And Installation Of Mini Mast High Mast Light At Various Locations In Karunagappally , Kollam
Tender Value
11.28 Lakhs
Estimated cost
Bid Submission
28 Sep 2019
0 days left
EMD
28215
Bank guarantee accepted
Document Fee
2950
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Karunagappally → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Supply And Installation Of Mini Mast High Mast Light At Various Locations In Karunagappally , Kollam
BOQ
| Name of Work: supply and installation of Mini Mast & High Mast Light at various locations in Karunagappally, Kollam | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Supply and Installation of 8 mtr Mini Mast system with 6 nos. 100 W LED Flood lights Various locations in Kulashekharapuram GP & Thazhava GP in Kollam. | BI01010001010000000000000515BI0100001112 | ||
| 2 | 1.001 | Supply and erection of octoganal galvanized pole 8 mtr height complete with 4 Nos foundation bolt suitable size base plate , space for mounting control switch box with inspection type door at a height of 500mm from the base plate including Bakelite sheet with 6A SP MCB (4Nos) with suitable Stud terminals etc as required. Size of pole- Top:70mm, Bottom:130mm and thickness:3mm\nGear box operation for raising and lowering the light. | BI01010001010000000000000515BI0100001113 | 4 | Nos |
| 3 | 1.002 | Earth work excavation in hard soil and depositing with a lead up to 50 m and lift up to 1.50 m including neat banking for foundation earth work(2.6.1) | BI01010001010000000000000515BI0100001114 | 7.2 | M3 |
| 4 | 1.003 | RCCM20 using 20mm (nominal size) broken stone forFoundation and Column footing (5.1.2) as per drawing | BI01010001010000000000000515BI0100001115 | 3.02 | M3 |
| 5 | 1.004 | Reinforcement for R.C.C works, bend tied and placed in position (plain grill requiring bend cold) using tor steel 5.22.6 | BI01010001010000000000000515BI0100001116 | 129.8 | kg |
| 6 | 1.005 | Form work for reinforced cement concrete in slabs including wooden planks, joists, bamboo posts and labour for taking down after completion of work (Hire and labour charges only) | BI01010001010000000000000515BI0100001117 | 18.2 | M2 |
| 7 | 1.006 | Supply, installation, testing and commissioning of 100W LED flood light luminaire with extruded aluminium heat sink pressure die cast aluminium cover on both side for holding of extruded aluminium heat sink and with voltage range ( 140 _ 270V AC). The luminaire shall be minimum IP 66 protected. LED Driver efficiency should be greater than 85 % with colour temperature should be greater than 5700K range. Inbuilt-surge protection 10kv and power factor 0.95 with THD less than 10% | BI01010001010000000000000515BI0100001118 | 24 | Nos |
| 8 | 1.007 | Supply and drawing the following sizes of multi-core PVC insulated & PVC sheathed 650/1100 v grade 3 core copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessarv connections of the following sizes. | BI01010001010000000000000515BI0100001119 | ||
| 9 | 1.0071 | 1.50 sq. mm | BI01010001010000000000000515BI0100001120 | 128 | m |
| 10 | 1.008 | Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using 1.60 mm CRCA sheet as per approved design and requirement, with front and rearaccess facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, painting the assembly with 2 coats synthetic enamel paint over a coat of zinc chromate primer etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the abrication of panel assembly. The measurments should be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc. including control wiring | BI01010001010000000000000515BI0100001121 | 6 | M2 |
| 11 | 1.009 | Fabrication, supply, conveyance and installation of angle iron frame work for wall mounting panel board using suitable size angle iron cut and welded to shape including painting with two coats of synthetic enamel paint over a coat of zinc chromate primer, bolting the frame to the panel using required bolt and nuts, fixing the whole to the wall, making good the damages etc. as required. | BI01010001010000000000000515BI0100001122 | 20 | kg |
| 12 | 1.01 | Supply and fixing the following types of beeding along the periphery of doors/ other detachable compartments to make the panel assembly dust & vermin proof including sticking with glue | BI01010001010000000000000515BI0100001123 | ||
| 13 | 1.0101 | U' section rubber beeding suitable for 1.60/ 2.00 mm sheet | BI01010001010000000000000515BI0100001124 | 8 | Mts |
| 14 | 1.011 | Supply and fixing the following accessories in the existing meter board and giving connections etc. | BI01010001010000000000000515BI0100001125 | ||
| 15 | 1.0111 | 32 A fuse holder for BS type blade fuses. | BI01010001010000000000000515BI0100001126 | 4 | Nos |
| 16 | 1.0112 | 32 A,415V , 2 way neutral link mounted on DMC/ SMC base | BI01010001010000000000000515BI0100001127 | 4 | Nos |
| 17 | 1.0113 | 20-25 A, clip-on offset tag fuse link of size fl | BI01010001010000000000000515BI0100001128 | 4 | Nos |
| 18 | 1.012 | Supply and installation of the following accessories suitable for 50 Hz , AC supply conforming to IS 8828-1995/ IEC 60898 of the following current ratings in the existing enclosure and giving connections as required | BI01010001010000000000000515BI0100001129 | ||
| 19 | 1.0121 | 25 A,2 pole, 30 mA RCCB | BI01010001010000000000000515BI0100001130 | 4 | Nos |
| 20 | 1.0122 | 6 Ato25 A, l0 kA, DP MCB (C curve) | BI01010001010000000000000515BI0100001131 | 4 | Nos |
| 21 | 1.0123 | 32A,2Pole, AC I rated power contractor with lNO+lNC auxiliary contracts & with AC coil | BI01010001010000000000000515BI0100001132 | 4 | Nos |
| 22 | 1.0124 | 24 Hours Timer for operating automatic ON-OFF function | BI01010001010000000000000515BI0100001133 | 4 | Nos |
| 23 | 1.013 | Supply and fixing the following sizes of PVC Conduit conforming to IS 9537 / 1983 part III along with all required accessories on surface including making good the damages etc as required | BI01010001010000000000000515BI0100001134 | ||
| 24 | 1.0131 | 25 mm dia light gauge | BI01010001010000000000000515BI0100001135 | 12 | M |
| 25 | 1.014 | Supply and providing pipe earthing as per IS 3043 with 2m long 40mm dia B class GI pipe,GI funnel with weld mesh,filling required quantity of charcoal & salt including construction of inspection chember with a bed concrete of 1:4:8 PCC using 40mm broken stone(10cm thick),brick work in cement mortar 1:6,plastering the surface of brick masonary and the exposed surface of PCC bed with cement mortar 1:4:,12mm thick,(the finished inside dimension shall be 300x300x300mm)but excluding test joint,earth continuity conductor to the pipe,and covering at the top(in ordinary soil) | BI01010001010000000000000515BI0100001136 | 8 | Nos |
| 26 | 1.015 | Supply and providing the following sizes of cast iron gully trap with covering at the top of the inspection chamber of earth pit as required | BI01010001010000000000000515BI0100001137 | ||
| 27 | 1.0151 | 300 x 300 x 6 mm cast iron gully trap with covering | BI01010001010000000000000515BI0100001138 | 4 | Nos |
| 28 | 1.016 | Supply and providing test joint for the earthing system using 2nos of the following sizes of strips including cuttings and bending to shape. Drilling necessary,holes and frxed to the watering pipe etc as required. | BI01010001010000000000000515BI0100001139 | ||
| 29 | 1.0161 | 2x25 x 3 mm GI strip | BI01010001010000000000000515BI0100001140 | 0.8 | M |
| 30 | 1.017 | Supply and providing earth lead from the test joint to the earth electrod eusing the following sizes of conductors/ strips including cutting, drilling ecessary holes (in case of strip) and fixing firmly with plate test joint etc as required. | BI01010001010000000000000515BI0100001141 | ||
| 31 | 1.0171 | 25 x 3 mm GI ship | BI01010001010000000000000515BI0100001142 | 16 | M |
| 32 | 1.018 | Supply and drawing bare earthing conductors of the following sizes along With wiring/ cables and giving connection as required. | BI01010001010000000000000515BI0100001143 | ||
| 33 | 1.0181 | 3. 15 mm copper conductor ( 10 SWG) | BI01010001010000000000000515BI0100001144 | 20 | M |
| 34 | 1.019 | supply of superior quality copper earth socket for the following sizes of earth conductor including crimping etc. as required. | BI01010001010000000000000515BI0100001145 | ||
| 35 | 1.0191 | 3.15 mm (10 SWG) | BI01010001010000000000000515BI0100001146 | 8 | Nos |
| 36 | 1.02 | Supply and providing the following sizes of bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required. | BI01010001010000000000000515BI0100001147 | ||
| 37 | 1.0201 | 25 x 3mm brass bolt & nut | BI01010001010000000000000515BI0100001148 | 24 | Nos |
| 38 | 1.021 | Supply and wiring with 650,/1 100 V grade PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 for interconnecting the control devices/ equipments including providing suitable size sockets at the termination points, keeping the wiring firm by suitable tie/ tie mounts/ PVC duct etc as required. | BI01010001010000000000000515BI0100001149 | ||
| 39 | 1.0211 | 4.00 sq mm single run without sockets. (for terminating KSEB meter Board) | BI01010001010000000000000515BI0100001150 | 16 | M |
| 40 | 1.022 | Charges for KSEB connection including all laison works (Actual Amount paid on production of receipt). | BI01010001010000000000000515BI0100001151 | 4 | Nos |
| 41 | 1.023 | Fabrication ,supply and conveyance and installation of Granite name board indicating the cost involved, the commencement, completion and inauguration date etc (Based on Actuals) | BI01010001010000000000000515BI0100001152 | 4 | Nos |
| 42 | 2 | Supply and Installation of 10 mtr High Mast System with 6 nos. of 120 W LED Flood lights at Lalaji Junction in Karunagappally Municipality, Kollam | BI01010001010000000000000515BI0100001153 | ||
| 43 | 2.001 | Supply and installation of High Mast system as per following specification\n(a) Supply 10 Mtr High Mast system with its accessories .Mast shaft shall be in single or two section, Galvanisation of single hot dipped, suitable for wind velocity as per IS 875 Head frame assembly 2 pont suspention system with steel wire rope 5 mm dia (7/19 construction) and double drum winching system arrangement conforming to IS with galvanised lantern carriage suitable for accommodating 6 Nos flood light luminaires symmetrically and its control gear box and lightining spike. (b) Supply and conveyance foundation bolt made of special steel along with nuts, washers, anchor plates and templates (c) Supply, erection, testing and commissioning of LED aviation obstruction light (d) Supply and erection control box consists of 1 No. 25A 2 pole MCB incomer, 25A 2 pole 30mA RCCB,32A 2 Pole AC I rated power contactor with lNO+lNC auxiliary contacts & with AC coil, single dial 24 hour timer with changing facility and suitable contactor for automatic operation, suitable size connection cable from control panel to flood light fittings. (e) Construction of suitable shallow foundation with l:2:4 Concrete for the high mast considering the safe soil bearing capacity at site as l0 T/Sqmtr at 2 Meter depth with reinforcement for RCC works, bend tied and placed in position (plain grill requiring bend cold ) using for steel including form work for reinforced cement concrete and excavation of soil including neat banking.\n(f) Erection and commissioning of the above high mast with the help of crane/derrick and other suitable equipment and wiring of luminaries with wiring materials (Bajaj/equivalent). | BI01010001010000000000000515BI0100001154 | 1 | No |
| 44 | 2.002 | Supply, installation, testing and commissioning of 120W LED flood light luminaire with extruded aluminium heat sink pressure die cast aluminium cover on both side for holding of extruded aluminium heat sink and with voltage range ( 140 _ 270V AC). The luminaire shall be minimum IP 66 protected. LED Driver efficiency should be greater than 85 % with colour temperature should be greater than 5700K range. Inbuilt-surge protection 10kv and power factor 0.95 with THD less than 10% \n\n\n\n | BI01010001010000000000000515BI0100001155 | 6 | Nos |
| 45 | 2.003 | Fabrication of fully partioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using 1.60 mm CRCA sheet as per approved designand requirement, with front and rear access faciiity, bus bar chambers, hinged doors for all switch gear comparcments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps bus bar interconnection etc, detachable .covers, for bus bar chamber and cable alley, painting the assembly with 2 coats \". syntheticenamel paint over a coat of zinc chromate primer etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slottedangles etc shall not be used for the fabrication of panel assembly. The measurments should be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc. including control wiring | BI01010001010000000000000515BI0100001156 | 1.5 | M2 |
| 46 | 2.004 | Supply and fixing the following types of beeding along the\nperiphery of doors/ other detachable compartments to make the panel assembly dust & vermin proof including sticking with glue\n | BI01010001010000000000000515BI0100001157 | ||
| 47 | 2.0041 | A' section neoprene beeding suitable for 1.60/ 2.00 mm sheet | BI01010001010000000000000515BI0100001158 | 2 | M |
| 48 | 2.005 | Fabrication, supply, conveyance and installation of angle iron frame work for wall mounting panel board using suitable size angle iron cut and welded to shape including painting with two coats of synthetic enamel paint over a coat of zinc chromate primer, bolting the frame to the panel using required bolt and nuts, fixing the whole to the wall, making good the damages etc. as required. | BI01010001010000000000000515BI0100001159 | 5 | Nos |
| 49 | 2.006 | Supply and fixing the following accessories in the existing meter board and giving connections etc. | BI01010001010000000000000515BI0100001160 | ||
| 50 | 2.0061 | 32 A,415 V Backelite fuse fitting | BI01010001010000000000000515BI0100001161 | 1 | Nos |
| 51 | 2.0062 | 32 A, 415V , 2 way neutral link mounted on DMC/SMCbase. | BI01010001010000000000000515BI0100001162 | 1 | Nos |
| 52 | 2.0063 | 20-32 A, clip-on offset tag fuse link of size fl | BI01010001010000000000000515BI0100001163 | 2 | Nos |
| 53 | 2.007 | Aluminium anodised Danger Notice Board of size 150 x 100 mm.with inscriptions (both in English and Malayalam) and conventional Skull and Bone in Red colour. | BI01010001010000000000000515BI0100001164 | 1 | Nos |
| 54 | 2.008 | Supply and wiring with 650/1100 V grade PVC i-nsulated stranded single core copper conductor cables conforming to IS 694 part I 1990 for interconnecting the control devices equipments including providing suitable size sockets at the termination points. Keeping the wiring firm by' suitable tie /tie mounts PVC duct etc as required.. | BI01010001010000000000000515BI0100001165 | ||
| 55 | 2.0081 | 4.00 sq mm single run withithout sockets | BI01010001010000000000000515BI0100001166 | 10 | M |
| 56 | 2.009 | Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.lKV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required. | BI01010001010000000000000515BI0100001167 | ||
| 57 | 2.0091 | 2 core 10 sq mm | BI01010001010000000000000515BI0100001168 | 26 | M |
| 58 | 2.01 | Supplying siemens' tropodur type nickel plated Double\ncompression brass cable gland for PVC insulated and PVC sheathed armoured aluminium copper conductor cable 1.1 KV grade. and making end termination suitable for 2 /3/ 3.5/4 core cable of the following sizes as required.\n | BI01010001010000000000000515BI0100001169 | ||
| 59 | 2.0101 | l0 sq mm | BI01010001010000000000000515BI0100001170 | 2 | Nos |
| 60 | 2.011 | Supplying and providing earth clamps for siemens tropodur typecable glands of suitable length and other dimensions noted along cable glands of suitable length and other dimensions noted along cable glands of suitable length and other dimensions noted along with each size of glands for the follouing sizes of cables as required. | BI01010001010000000000000515BI0100001171 | ||
| 61 | 2.0111 | 4sqmm-16 sq mm with 12 mm wide x 1 mm thick clip | BI01010001010000000000000515BI0100001172 | 2 | Nos |
| 62 | 2.012 | Supply of superior quality aluminium tubular iable socket and making core termination of cables of the following sizes including crimping etc. as required.. | BI01010001010000000000000515BI0100001173 | ||
| 63 | 2.0121 | 10 sq mm | BI01010001010000000000000515BI0100001174 | 4 | nos |
| 64 | 2.013 | Supply route marker with l02mmx102mm cast iron, spike 5mm thick with inscription 'LT Cable' there on bolted / welded to 35x35x6rnm angle iron 60cm long and fixing the same in ground as required.. | BI01010001010000000000000515BI0100001175 | 2 | Nos |
| 65 | 2.014 | Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in hard soil 0.75m below ground level including excavation | BI01010001010000000000000515BI0100001176 | ||
| 66 | 2.0141 | 40/32 mm or nearest size | BI01010001010000000000000515BI0100001177 | 26 | M |
| 67 | 2.015 | Supply and fixing the folloting sizes of PVC Conduit conforming to IS 9537 I 1983 part III along with all required accessories on existing pole/ concrete etc. as service/protection pipe as required | BI01010001010000000000000515BI0100001178 | ||
| 68 | 2.0151 | 32 mm dia light gauge | BI01010001010000000000000515BI0100001179 | 2 | M |
| 69 | 2.016 | Supply and providing pipe earthing as per IS 3043 with 2 Mtr long 40mm dia b-Class GI Pipe,GI funnelwith weld mesh filling required quantity of charcoal and solt including construction of inspection chamber with a bed concrete of 1:4:8 PCC using 40mm broken stone (10cm thick)brick work in cement mortar 1:6 plastering the suface of brick masonary and the exposed surface of pcc bed with cement mortar 1:4:,12mm thick,(the finished inside dimension shall be 300x 300x300mm)but excluding the test joint earth continuity conductor to the pipe and covering at the top (in ordinary soil) | BI01010001010000000000000515BI0100001180 | 2 | Nos |
| 70 | 2.017 | Supply and providing the following sizes of cast iron gully trap with covering at the top of the inspection chamber of earth pit as required | BI01010001010000000000000515BI0100001181 | ||
| 71 | 2.0171 | 300 x 300 x 6 mm cast iron gully trap with covering | BI01010001010000000000000515BI0100001182 | 1 | No |
| 72 | 2.018 | Supply and providing test joint for the earthing system using 2 Nos of the following sizes of srrips including cutting and bending to shape, drilling necessary holes and fixed to the watering pipe etc as required. | BI01010001010000000000000515BI0100001183 | ||
| 73 | 2.0181 | 2x25 x 3 mm GI strip | BI01010001010000000000000515BI0100001184 | 0.2 | Mtr |
| 74 | 2.019 | Supply and providing earth lead from the test joint to the earth electrode using the following sizes of conductors/ strips including cutting, drilling necessary holes (in case of strip) and fixing firmly with plate test ioint etc as required.. | BI01010001010000000000000515BI0100001185 | ||
| 75 | 2.0191 | 25 x 3 mm GI strip | BI01010001010000000000000515BI0100001186 | 4 | Mtr |
| 76 | 2.02 | Supply and drau'ine bare earthing conductors of the foilowing sizes along with wiring cables and giving connection as required | BI01010001010000000000000515BI0100001187 | ||
| 77 | 2.0201 | 3.15 mm copper conductor (10 SWG) | BI01010001010000000000000515BI0100001188 | 26 | Mtr |
| 78 | 2.0202 | 25 x 3 mm GI strip | BI01010001010000000000000515BI0100001189 | 5 | Mtr |
| 79 | 2.021 | Supply of superior quality copper earth socket for the following sizes of earth conductor including crimping etc. as required. | BI01010001010000000000000515BI0100001190 | ||
| 80 | 2.0211 | 3.15 mm (10SWG) | BI01010001010000000000000515BI0100001191 | 4 | Nos |
| 81 | 2.022 | Supply of superior quality copper earth socket for the following sizes of earth conductor including crimping etc. as required. | BI01010001010000000000000515BI0100001192 | ||
| 82 | 2.0221 | 25 x 6mm brass bolt & nut | BI01010001010000000000000515BI0100001193 | 4 | Nos |
| 83 | 2.0222 | 25 x 8 mm GI bolt & nut | BI01010001010000000000000515BI0100001194 | 2 | Nos |
| 84 | 2.023 | Fabrication ,supply, conveyance and installation of Granite name board indicating the cost involved, the commencement, completion and inauguration date etc.(Based on Actuals) | BI01010001010000000000000515BI0100001195 | 1 | No |
| 85 | 2.024 | Charges for KSEB connection including all laison works (Actual Amount paid on production of receipt). | BI01010001010000000000000515BI0100001196 | 1 | No |
AI Tender Summary
Tender Timeline
Sep 21, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedSep 28, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 01, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender