}

Painting Of Fire Water Line , Fire Fighting Equipment , Fuel Process Piping And Valves At Serpl Raipur, Raipur, Chhattigarh-Chhattisgarh

Indian Oil Corporation Limited-IOCL has published Painting Of Fire Water Line , Fire Fighting Equipment , Fuel Process Piping And Valves At Serpl Raipur. Submission Date for this Tender is 03-10-2019. Painting Tenders in Raipur, Chhattigarh Chhattisgarh. Bidders can get complete Tender details and download the document.




Tender Notice

21878183
Painting Of Fire Water Line , Fire Fighting Equipment , Fuel Process Piping And Valves At Serpl Raipur
Open Tender
Indian
Chhattisgarh
Raipur, Chhattigarh
03-10-2019

Tender Details

Painting Of Fire Water Line , Fire Fighting Equipment , Fuel Process Piping And Valves At Serpl Raipur

Key Value

Document Fees
Refer document
EMD
Refer document
Tender Value
INR 4.50 Lakhs /-

BOQ Items

Name of Work: Painting of Fire water line, Fire fighting equipment, Fuel process piping and valves at SERPL Raipur NOTE: 1. Please enable macros before filling the rates to see the quoted figures in words. 2. The bidder shall quote firm prices “Excess(+)/ At Par/ Less(-)” against the rates mentioned in the price schedule provided in BoQ1 sheet as per instructions provided herein and in S.C.C. after taking into account all the tender terms and conditions and scope of work. In case rates are quoted to more than 2 decimal places then, the amount quoted towards the tender shall be worked out for the rates quoted to first 2 decimal points without rounding off. 3. Only "Bidder Name", "Excess (+) or "At Par" or Less (-)" & "Percentage" are to be filled by the bidder in the designated "Sky Blue cells". For "At Par" selection, the percentage quoted shall be treated as 0.00 and quoted amount at par with estimate. 4. "Excess (+)" or "At Par" or "Less (-)" can be selected from the dropdown menu by clicking on the cell. 5. No changes shall be made by the bidder to S.No., Unit, Quantity. 6.The rates quoted by the tenderer shall include all cost towards equipment, labour & laboratory back-up, logistics, transport, spares, tools, tackles, consumables, etc., travel and stay arrangements and other incidentals including supply of materials as may be necessary for rendering the services as per detailed specifications. 7. Goods and Services tax as per GST Act 2017 for concerned services has been added to the base price of below mentioned services. If the bidder wishes to quote some other Goods and Services tax rate other than mentioned in the price schedule provided in BoQ1 sheet, they may quote the same in "Annexure H". Statutory variation on Goods and Services Tax as applicable for the category/service shall be to Owner’s account up to the contractual completion period. Reverse charges mechanism on Goods and Services tax amount shall be applicable as per Govt. rules. 8. Bidders are advised strictly not to alter or change the BOQ format/ contents. Bidders are also advised not to paste any image file or put any additional conditions in the BOQ work sheet. Abbreviations: Unit - SQM=Square Metre, CM = Per letter per cm height
Sl. No. Item Description Item Code / Make Quantity Units
1 10 Letter writing with black Japan or ready mixed Paint of required shade including preparation of surface and painting of base coat with two coats of synthetic enamel paint of required colour with all labour, materials, tools and tackles complete as per direction of Engineer-in- Charge.\nTwo or more coats of Paint shall be applied for letter writing till uniform colour and glossy finish are obtained.\nNote: Unit of measurement should be read as "Per letter per cm height" in place of CM 2500 CM
2 20 Supplying & Applying priming coat with ready mixed primer of approved brand and manufacturer like zinc cromate red oxide/MIO zinc phosphate red oxide/epoxy primers or any other equivalent primer at all heights over steel surfaces like structures, columns, pipes, vessels, tanks etc. including cleaning of the existing painted surface using emery papers/wire brush, consumables, tools, tackles, labour etc. complete as per manufacturers specifications and directions of the Engineering-in- Charge.
3 30 For Above ground fire water line\nApplication of Inorganic Zinc Ethyl Silicate primer to achieve a DFT of 75 micron min. in a single coat primer by Airless spray or equivalent means \n 947 SQM
4 40 Supplying & Applying various epoxy and other protective finish paints of approved make and brand over steel structures, pipelines, tanks and equipments, concrete floors etc. with all materials, labours, tools-tackles and consumables etc. complete as per manufacturers specification & directions of Engineer-in-charge. \nNote: 1. All fire water lines shall be painted with finish paint of FIRE RED colour(Shade no.-536 of IS 5:2007) \n2. All Fuel process piping shall be painted with Finish paint of Silver colour.
5 50 For Above ground fire water line, valves \nOne or more coats of Acrylic Polyurethane Paint to achieve a finish coat DFT up to 100 micron min.\n\n 947 SQM
6 60 For Above ground Fuel station Process piping & Valves\nOne or more coats of Acrylic Polyurethane Paint to achieve a finish coat DFT up to 100 micron min.\n 518 SQM
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail