Construction Of New Anganwadi Building At Nhave At V . P . Nhave Tal Roha Dist Raigad
Tender Value
8.53 Lakhs
Estimated cost
Bid Submission
25 Sep 2019
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Taluka-Roha,Dst-Raigad → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of New Anganwadi Building At Nhave At V . P . Nhave Tal Roha Dist Raigad
BOQ
| Name of Work:-CONSTRUCTION OF NEW ANGANWADI BUILDING AT NHAVE AT @V.P. NHAVE ,TAL;- ROHA, DIST;- RAIGAD. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Item No. 1:- Excavation for foundation in hard murum and boulders including removing the excavated material up to a distance 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5m.) SSR 18-19 SR.no/I - 655/21.06 + 10% | BI01010001010000000000000515BI0100001113 | 37.4369 | Cum |
| 2 | 2 | Item No.2:-Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. Rate Analysis | BI01010001010000000000000515BI0100001114 | 13.5461 | Cum |
| 3 | 3 | Item No.3:-Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Rate Analysis | BI01010001010000000000000515BI0100001115 | 9.03075 | Cum |
| 4 | 4 | Item No 4 :- Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and watering etc.complete.Rate Analysis | BI01010001010000000000000515BI0100001116 | 29.8689 | Cum |
| 5 | 5 | Item No 5 :- Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Rate Analysis | BI01010001010000000000000515BI0100001117 | 2.1987 | Cum |
| 6 | 6 | Item No.6 :- Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete..SSR 18-19 SR.no/I - 679/21.36 + 10% | BI01010001010000000000000515BI0100001118 | 19.01 | Cum |
| 7 | 7 | Item No 7 :-Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete Rate Analysis | BI01010001010000000000000515BI0100001119 | 29.2508 | Cum. |
| 8 | 8 | Item No 8 :-Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Rate Analysis | BI01010001010000000000000515BI0100001120 | 0.621 | Cum. |
| 9 | 9 | Item No 9 :- Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Rate Analysis | BI01010001010000000000000515BI0100001121 | 0.3645 | Cum. |
| 10 | 10 | Item No. 10 :- Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete.SSR 18-19 SR.no/I - 748/23.04+add 10% for hilly area | BI01010001010000000000000515BI0100001122 | 0.38694 | M.T |
| 11 | 11 | Item No 11:- Providing and fixing 6.00 mm thick ISI mark Asbestos Cement Corrugated sheet roofing including galvanised iron 'J' or 'L' hook bolts galvanised iron band bituminous G.I. washers, galvanised iron clamps, bolts, nuts and scaffolding etc. complete.SSR 18-19 SR.no/I - 1074/38.06+add 10% | BI01010001010000000000000515BI0100001123 | 72.2 | Smt. |
| 12 | 12 | Item No 12 :-Providing and fixing 6 mm thick ISI mark Asbestos Cement ridge capping for roofing including galvanised iron hooks, bolts, galvanised iron and bituminous washers, galvanised iron clamps, bolts, nuts including scaffolding etc. complete.SSR 18-19 SR.no/I - 1075/38.07+add 10% | BI01010001010000000000000515BI0100001125 | 9.5 | Rmt. |
| 13 | 13 | Item No 13:- Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Rate Analysis | BI01010001010000000000000515BI0100001126 | 0.5 | Cum. |
| 14 | 14 | Item No.14:- Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.Rate As per S.S.R - 2018-19, SR.NO/I-797/26.33+10% | BI01010001010000000000000515BI0100001127 | 0.09663 | M.T |
| 15 | 15 | Item No 15 :- Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete. Rate As Per S.S.R 2018-19, Sr.No-It.No-1118/39.08 | BI01010001010000000000000515BI0100001128 | 0.04836 | Cmt. |
| 16 | 16 | Item No 16 :-Providing and fixing single leaf panelled door shutter without fanlight and shutter 35 mm thick as per drawing consisting of T.W. top rail size 100mm x 35 mm and bottom and lock rail 200mm x 35mm insert panel 12 mm thick commercial ply faced T.W. particle board with phenol formaldehyde synthetic resin (Generally confirming to ISI 3097) excluding frame, including stainless steel fixtures fastening and T.W. beading at junction of panels inserts and as instructed by the Engineer in charge including 3 coats of oil painting etc. complete.Rate As Per S.S.R 2018-19, Sr.No-It.No-1123/39.06 | BI01010001010000000000000515BI0100001129 | 3.6 | Smt. |
| 17 | 17 | Item No 17 :- Providing sills of polished Kadappa stone 25mm to 30mm thick, on a bed of 1:4 cement mortar including cement float, filling joints with slurry, curing polishing and cleaning etc. complete. Rate As Per S.S.R 2018-19, Sr.No-It.No-935/33.20 | BI01010001010000000000000515BI0100001130 | 7.4025 | Smt. |
| 18 | 18 | Item No 18 :- Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. Rate As Per S.S.R 2018-19, Sr.No-It.No-1126/39.09 | BI01010001010000000000000515BI0100001131 | 1.35 | Smt. |
| 19 | 19 | Item No 19 :- Providing and preparing kitchen otta up to 75 cm width,made up from 30 mm thick and 75 cm high vertical support for kadppa at 1 m. c/c of 25 mm thick both side polished kadappa middle shelf and bottom of 20 mm thick one side polished kadappa with facia patti of 20 x 50 mm kadappa including all material labour cutting fixing with cement mortar and araldite curing polished and cleaning etc. complete. Rate As Per S.S.R 2018-19, Sr.No-It.No-953/33.38 | BI01010001010000000000000515BI0100001132 | 3.4875 | Smt. |
| 20 | 20 | Item No 20 :-Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With colour Anodising with box.Rate As Per S.S.R 2018-19, Sr.No-It.No-14/39.37 | BI01010001010000000000000515BI0100001133 | 8.28 | Smt. |
| 21 | 21 | Item No 21 :-Providing and fixing in position after hoisting, precast 1:2 cement mortar reinforced jali 50 mm thick with 3 mm diameter mild steel bar reinforcement, of approved design on both side, fixing in cement mortar 1:3 and curing etc. complete Rate As Per S.S.R 2018-19, Sr.No-It.No-807/26.46 | BI01010001010000000000000515BI0100001134 | 0.54 | Smt. |
| 22 | 22 | Item No 22 :-Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete. Rate Analysis | BI01010001010000000000000515BI0100001135 | 146.937 | Smt. |
| 23 | 23 | Item No 23 :-Providing internal cement plaster 20mm. thick in two coats in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete. Rate Analysis | BI01010001010000000000000515BI0100001136 | 112.678 | Smt. |
| 24 | 24 | Item No 24 :- Providing and laying Polished Tandur Stone flooring 25mm to 30mm thick required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.Rate As Per S.S.R 2018-19, Sr.No-It.No-920/33.05 | BI01010001010000000000000515BI0100001137 | 45.6725 | Smt. |
| 25 | 25 | Item No 25 :-Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete..Rate As Per S.S.R 2018-19, Sr.No-It.No-979/33.67 | BI01010001010000000000000515BI0100001138 | 4.125 | Smt. |
| 26 | 26 | Item No 26:Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.Rate As Per S.S.R 2018-19, Sr.No-It.No-940/33.25 | BI01010001010000000000000515BI0100001139 | 7.44 | Smt. |
| 27 | 27 | Item No 27 :-Providing and fixing mild steel grill work for windows, ventilators, etc. 15 kg/sqm as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete.Rate As Per S.S.R 2018-19, Sr.No-It.No-1212/40.02. | BI01010001010000000000000515BI0100001140 | 8.28 | Smt. |
| 28 | 28 | Item No 28 :- Providing and fixing Orissa type white glazed earthenware 575 mm water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete.Rate As Per S.S.R 2018-19, Sr.No-It.No-1321/42.30. | BI01010001010000000000000515BI0100001141 | 1 | No. |
| 29 | 29 | Item No 29 :- Providing and fixing 10 cm PVC nahani trap with grating etc. complete. Rate As Per S.S.R 2018-19, Sr.No-It.No-1411/42.67. | BI01010001010000000000000515BI0100001142 | 1 | No. |
| 30 | 30 | Item No 30 :- Providing flush grooved pointing with cement mortar 1:3 for stone masonry work including scaffolding and curing etc. complete.\n Rate Analysis | BI01010001010000000000000515BI0100001143 | 21.84 | Smt. |
| 31 | 31 | Item No 31 :-Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete.Rate As per S.S.R - 2018-19, SR.NO/I-1034/36.11+1277/36.01]+10% | BI01010001010000000000000515BI0100001144 | 146.937 | Smt. |
| 32 | 32 | Item No 32 :-Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete.Rate As per S.S.R - 2018-19, SR.NO/I-1011/35.13+1019/35.22]10% | BI01010001010000000000000515BI0100001145 | 112.678 | Smt. |
| 33 | 33 | Item No. 33 :- Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge SSR 18-19 SR.no/I - 287 /6.36+10% | BI01010001010000000000000515BI0100001146 | 1 | No. |
| 34 | 34 | Item no 34 :- Rates for material testing in lab. 1) Rubble - Crushing ValueSSR P/I- 541/28 | BI01010001010000000000000515BI0100001147 | 1 | Test |
| 35 | 35 | 2) Bricks -water absorb Test , SSR-18-19 P/I-540/13 | BI01010001010000000000000515BI0100001148 | 1 | Test |
| 36 | 36 | 3)Fine Aggregate - Silt Factor ,Fineness Modulus, SSR-18-19 P/I-540/10 | BI01010001010000000000000515BI0100001149 | 1 | Test |
| 37 | 37 | Add 12 % For G.S.T Rs | BI01010001010000000000000515BI0100001150 | 1 | AS PER ITEM |
AI Tender Summary
Tender Timeline
Sep 19, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedSep 25, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 26, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender