| 1 | 1 | Providing and fixing vitrified tiles of size 1200 x 800mm of approved make in skirting/dadoi laid in any pattern as specified over base of 20mm thick cement coarse sand morter 1.3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. \nNote:- Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO, KAJA-RIA, SOMANI, ORIENT, BELL, JOHNSONS RAK & SIMPOLO.\n | | 666 | Per Sqm |
|---|
| 2 | 2 | Providing and fixing vitrified tiles of size 900 x 900mm of approved make in skirting/dadoi laid in any pattern as specified over base of 20mm thick cement coarse sand morter 1.3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. \nNote:- Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO, KAJA-RIA, SOMANI, ORIENT, BELL, JOHNSONS RAK & SIMPOLO.\n | | 256 | Per Sqm |
|---|
| 3 | 3 | Renovation of Squash Court by Providing and fixing World Squash Federation (WSF) approved Maple Hardwood Sports flooring I grade MFMA stamped in size 20 mm x 57 mm/83 mm Tongue & Groove , kiln dried and treated for termites for Delhi climate . Pine wood sleepers of size 38mm x 63.5mm x1.22m installed at 230mm distance from centre to centre. The sleepers anti termite and bugs. 19mm thick cohesion pads placed under the wooden sleepers for extra esilience. 6 mil polyethylene shall be laid on the IPS surface as vapour barrier. The maple floor should be un- finished sanded with 60 grit sand paper to leave a \"nap\" on the floor. Floor should not be sealed and polished. Game line shall be applied as per WSF, White hard plaster, Squash Court Painting, Sound Board, Squash Backwall glass with fitting, fixing of toughened glass with steel frame. \n | | 1 | each |
|---|
| 4 | 4 | Providing and fixing Non woven polypropylene carpet as per colour and design finalized.\n | | 195 | Per Sqm |
|---|
| 5 | 5 | Providing and fixing vitrified tiles of size 1200 x 300mm of approved make in skirting/dadoi laid in any pattern as specified over base of 20mm thick cement coarse sand morter 1.3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. \nNote:- Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO, KAJA-RIA, SOMANI, ORIENT, BELL, JOHNSONS RAK & SIMPOLO.\n\n | | 42 | Per Sqm |
|---|
| 6 | 6 | Providing and fixing mineral fibre false ceiling tiles at all heights of size 595x595mm of approved texture, design and pattern complete as per HSR. | | 948 | Per Sqm |
|---|
| 7 | 7 | Providing and making false ceiling with POP of approved make with approved texture, design and pattern complete in all respect. | | 224 | Per Sqm |
|---|
| 8 | 8 | Supply & erection of light wiring recessed /in 1600.00 false ceiling in PVC conduit medium gauge with 1mm² PVC copper wire for individual points including circuit wiring with 2x15mm² + 1x1mm² PVC copper wire from D.B. to switch board. The point is to be controlled by providing modular type switches with MS Box & modular sheet complete with cost of wiring, LED Lights. | | 1172 | Per Sqm |
|---|
| 9 | 9 | Preparation of plastered surfaces for painting including sand papering the surface, applying one coat of linseed oil, and filling with approved quality filler, consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to the required finish complete.\nPainting two coats with ready mixed exterior/interior paint in all shades with primer coat as per HSR Item.\n\n | | 3680 | Per Sqm |
|---|
| 10 | 10 | Providing and laying granite marble cladding (in toilets) with rubbing and polishing as per approved shade and pattern, over 12mm thick cement mortar including grouting the joints with white cement slurry mixed with matching pigment, complete in all respects including filling the depressions, if any, as per approved pattern. | | 330 | Per sqm |
|---|
| 11 | 11 | Providing and fixing in position best Indian make European type water closet suite, symphonic type, Double trap symphonic WC suite (White) | | 8 | Each |
|---|
| 12 | 12 | Providing and fixing in position best Indian make lavatory suites (with full anti splash) rim in vitreous chinaware and all other necessary fittings \nvi. Size 690 mm x 550 mm with one No. tap Mixed Colour\n | | 8 | Each |
|---|
| 13 | 13 | Providing and fixing in position best Indian Make stall urinal in vitreous chinaware (to the approval of Engineer-in-charge) complete in all respect.\niii. Mixed colour\n | | 8 | each |
|---|
| 14 | 14 | Providing and laying of dia CPVC/GI pipe complete in all respect (20 mm dia) | | 2744 | Per mtr |
|---|
| 15 | 15 | Providing and fixing wooden cladding on walls with best quality 25mm thick teak wood battens & melamine polishing complete including labour. | | 70 | Per Sqm |
|---|
| 16 | 16 | Supply, Installation, Testing and Commissioning of Modular Type outdoor units equipped with Highly Efficient Scroll Compressors, all Inverter Compressor(s), special heat exchanger, Y- branch as required, outdoor unit support, auto check function for connection error, auto address setting, Refrigerant temperature control and capacity as mentioned below. VRV/VRF System shall be suitable for working on 48 °C ambient temperature, Refrigerant R 410A. with MS Channel outdoor stand of suitable size to carry the weight of outdoor unit. outdoor unit must have individual module isolator to cut off power. supply of individual unit if required. The unit price shall be inclusive of full charge of Refrigerant Gas & Oil, MS Stand, Freight, Insurance etc. as applicable in INR. VRV/VRF System shall be suitable for working on 48 °C Ambient Temperature, with Refrigerant R-410A. Unit price shall be inclusive of full charge of Refrigerant Gas & Oil, Freight, Insurance as applicable In INR. The Outdoor unit shall have capability to vary cooling coil refrigerant temperature automatically upto 11 deg C to cater varying load condition in energy efficient manner. The COP of system should be Minimum 7.10 at 50% load in cooling condition at AHRI condition as mentioned in specification The each outdoor module should have multiple compressor. Makes: Daikin / Toshiba / OGeneral/ Mitsubishi Electric.\nMinimum Nominal Capacity in HP as stated below:\n24 HP ( with combination of minimum 2 or more module) = Nos. 3\n | | 3 | each |
|---|
| 17 | 17 | Indoor Units: Ceiling suspended Ductable type\nSupply, Installation, testing and commissioning of Ceiling suspended duct-able Indoor units equipped with, pre-filter, fan section, coil section with DX coil, outer cabinet, drain pan, insulation, pipe connections, variable evaporative temperature control, 1 Phase units, Indoor unit must have inbuilt force shut adaptor to automatically switch off the unit when connected with Fire alarm or key card adaptor Makes : Daikin / Toshiba / O - General/ Mitsubishi Electric\na. Ceiling suspended duct-able type indoor unit - 2.60 TR\n | | 2 | each |
|---|
| 18 | 18 | Ceiling suspended duct-able type indoor unit - 3.20 TR | | 8 | each |
|---|
| 19 | 19 | Ceiling suspended duct-able type indoor unit - 4.00 TR | | 3 | each |
|---|
| 20 | 20 | Ceiling suspended duct-able type indoor unit - 4.60 TR | | 3 | each |
|---|
| 21 | 21 | Supply, Installation, testing and commissioning of Refrigerant Piping Y-Joints or Headers as required to connect the above outdoor units and indoor units. | | 13 | each |
|---|
| 22 | 22 | Supply, Installation, testing and commissioning of Corded remote as desired. | | 16 | each |
|---|
| 23 | 23 | Piping works \nSITC of PVC (Minimum 15 Kg/Sqcm pressure rated) Drain Water Piping complete with fittings (elbows, tees, reducers, sockets etc.), supports, jointing and any other item required to make the system complete. Nominal Diameters of Pipes in mm as indicated below:\na. 25 mm ( with 6 mm Class- O XLPE)\n | | 80 | Per mtr |
|---|
| 24 | 24 | b. 32 mm ( with 6 mm Class- O XLPE) | | 40 | Per mtr |
|---|
| 25 | 25 | Copper Refrigerant Piping with Insulation for VRV System:\nSITC of Copper Refrigerant piping for VRV / VRF System complete with fittings, supports, jointing, insulation with class O -XLPE, gas charging & commissioning as per specifications, all accessories as per specifications and any other item required to make the system complete. Nominal Dia in mm OD as indicated below :\na. 41.3 ( with 19 mm insulation ) Rmt 5\n. | | 5 | Per mtr |
|---|
| 26 | 26 | b. 34.9 ( with 19 mm insulation ) Rmt 55 | | 55 | Per mtr |
|---|
| 27 | 27 | c. 28.6 ( with 19 mm insulation ) Rmt 40 | | 40 | Per mtr |
|---|
| 28 | 28 | d. 25.4 (with 19 mm insulation) Rmt 5 | | 5 | Per mtr |
|---|
| 29 | 29 | e. 22.2 ( with 19 mm insulation ) Rmt 15 | | 15 | Per mtr |
|---|
| 30 | 30 | f. 19.1 ( with 13 mm insulation ) Rmt 75 | | 75 | Per mtr |
|---|
| 31 | 31 | g. 15.9 (with 13 mm insulation) Rmt 80 | | 80 | Per mtr |
|---|
| 32 | 32 | h. 12.7 ( with 13 mm insulation ) Rmt 10 | | 10 | Per mtr |
|---|
| 33 | 33 | i. 9.5 ( with 13 mm insulation ) Rmt 95 | | 95 | Per mtr |
|---|
| 34 | 34 | j. 6.4 (with 13 mm insulation) Rmt 5 | | 5 | Per mtr |
|---|
| 35 | 35 | Control Cabling \nProviding & fixing control cum transmission wiring of 2 core x 1.5 sqmm copper in suitable conduits between indoor units and outdoor units and indoor units and remote controllers.\n | | 280 | Per mtr |
|---|
| 36 | 36 | Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.\n24 gauge galvanized sheet steel\n | | 225 | Per Sqm |
|---|
| 37 | 37 | 22 gauge galvanized sheet steel | | 55 | Per Sqm |
|---|
| 38 | 38 | Supplying & fixing of powder coated extruded aluminum Supply Air Grills with louvers with aluminum grill damper as per specifications. | | 6 | Per Sqm |
|---|
| 39 | 39 | Supplying & fixing of powder coated extruded aluminum Return Air Grills with louvers but without volume control damper complete as required. | | 8 | Per Sqm |
|---|
| 40 | 40 | GSS Duct dampers \nSITC of multiblade galvanized steel sheet construction box type Volume control damper complete with neoprene rubber gasket, nuts bolts, flanges and linkages , complete in all respect as per specifications\n | | 3 | Per Sqm |
|---|
| 41 | 41 | Supply, Fabrication and Installation of Flexible Connectors/ Canvas connection at duct with fittings, flanges, supports, all accessories as per specifications | | 16 | each |
|---|
| 42 | 42 | Supplying and fixing of following thickness duly laminated aluminum foil of mat finish XLPE (class “O”) insulation on existing duct after applying two coats of cold setting adhesive (CPRX compound). The joints shall sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required.\n13mm thick\n | | 230 | Per Sqm |
|---|
| 43 | 43 | Supplying and fixing of following thickness Acoustic Insulation Open Cell Nitrile Rubber insulation on duct after applying two coats of cold setting adhesive (CPRX compound).\nThe joints shall sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required.\n10mm thick\n | | 60 | Per Sqm |
|---|
| 44 | 44 | Supply, installation, testing and commissioning of weather proof MV panel board with canopy, of cubical type, compartmentalized design fabricated from 2mm thick CRCA sheet having necessary cable alleys, powder coated through seven-tank process facility for pricking and degreasing, including connections and interconnections as per specifications complete with following accessories as required:\nINCOMER\n250 A TPN MCCB 35 KA\nMetering\n1 No. 0-400 A, 96 Sqmm ammeter with CT & Selector switch.\n1 No. 0-500 Volts, 96 Sqmm Digital voltmeter with built in selector switch and protection fuses.\n1 Set RYB phase indicating LED lamps for incoming supply.\nBusbars\n1 Set 200 Amps, TPN, 415 volts, 3 phase 50 Hz colour coded Al bus bars.\nOutgoing\n25 A TPN RCCB- 6 Nos.\n | | 1 | Each |
|---|
| 45 | 45 | Supply, laying, testing and commissioning of Power cabling XLPE insulated, PVC sheathed, armoured, copper conductor of 1.1 KV grade on cable trays.\na. 4C x 10 Sqmm Copper\n | | 25 | Per mtr |
|---|
| 46 | 46 | b. 4C x 6 Sqmm Copper | | 75 | Per mtr |
|---|
| 47 | 47 | Supplying and making cable end termination complete with brass compression gland, crimping thimbles for PVC sheathed aluminium /copper conductor cable of 1.1 KV grade of the under noted sizes as required.\na. 4C x 10 Sqmm Copper\n | | 6 | Each |
|---|
| 48 | 48 | b. 4C x 6 Sqmm Copper | | 12 | Each |
|---|
| 49 | 49 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. | | 30 | Per Mtr |
|---|
| 50 | 50 | Supplying and installing following size of perforated painted with powder coating M.S.\ncable trays with perforation not more than 17.5%, in convenient sections, joined with\nconnectors, suspended from the ceiling with M.S. suspenders including bolts & nuts,\npainting suspenders etc. as required.\na. 150mm wide & 50mm deep x 1.6mm thickness\n | | 100 | Per Mtr |
|---|
| 51 | 51 | b. 300mm wide & 50mm deep x 2mm thickness | | 75 | Per Mtr |
|---|
