Alakhpura, Barsi Gujran And Village Durjanpur Tehsil Bawani Khera Providing Raw Water Arrangements For 3 Nos Water Works I.E. Alakhpura, Barsi Gujran And Village Alakhpura Distt. Bhiwani Laying, Cutting And Jointing Of 200Mm. 250Mm , 300Mm & 350Mm I/D Di, Barsi Durjanpur Alakhpura-Haryana
TDR : 21845198
Tender Notice
BOQ
Expired
Barsi Durjanpur Alakhpura
Haryana
Alakhpura, Barsi Gujran And Village Durjanpur Tehsil Bawani Khera Providing Raw Water Arrangements For 3 Nos Water Works I.E. Alakhpura, Barsi Gujran And Village Alakhpura Distt. Bhiwani Laying, Cutting And Jointing Of 200Mm. 250Mm , 300Mm & 350Mm I/D Di
Name of Work: Alakhpura, Barsi Gujran and village Durjanpur Tehsil Bawani Khera Providing Raw water arrangements for 3 Nos water works i.e. Alakhpura, Barsi Gujran and village Alakhpura Distt. Bhiwani \"Laying, cutting and jointing of 200mm. 250mm , 300mm & 350mm i/d DI pipe rising main and supplying, installing & commissioning of pumping machinery for raw water including all required electrical & mechanical equipments and all other works contigent thereto
Sl.No.
Item Description
Item Code / Make
Quantity
Units
1
1.01
Supply & Erection of Horizontal spindle split casing type pumping sets of following duties directly coupled to AC squirrel cage induction type motor with accessories as described in Schedule No. II & III complete in all respect with priming arrangement with complete base frame. \nB) Raw water pump set \n4500 LPM 60 mtrs head with squirrel cage induction motor 1440 RPM, 3 phase 50 Hz of suitable rating \n
BI01010001010000000000000515BI0100001113
2
Each
2
1.02
Supply and fixing following CI D/F pipe and specials/ Bell Mouth including cost of jointing materials, laying, jointing, refilling including making adequate support of masonry/ concrete for delivery and suction pipe from bell mouth in the collecting tank upto the rising main laid by the department as per plan shown from the foundation wall of pump chamber for all the raw water and clear water pumping sets of water works in position as per specification given in schedule No. II\nFor pumping machinery Details of pipe and specials (a) CI D/F bends, Reducers, tees, tapers, tail piece, blank flange etc. pipes excluding jointing material\n
1500
Per kg
3
1.03
C.I. D/F Pipes 300 mm i/d
25
Per mtr
4
1.04
Supply, erection, testing and commissioning Wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200x900 mm and 400 mm deep having following items. \nfor Raw water 4500 LPM x 60 M\na) Main switch 150 Amp. 1 No. & 100 Amp. 1 No. (L&T Siemens, ABB)\nb) Volt meter 100x100 mm range 0 to 500 Volt 1 No. (AE/KAPPA/L&T)\nc) Amp meter 100x100 mm range 0 to 100 Amp. 2 Nos. (AE/KAPPA/L&T)\nd) CT 100/3 Nos. (AE/KAPPA/L&T)\ne) VSS & ASS 1 No. each of approved make \nf) SPP 1 No. of approved make \ng) Motor starter, star delta 2 No. for 4500 LPM x 60 M Head Motor (L&T Siemens, ABB)\nh) Capacity KVAR as per site requirement\ni) Indicating Lamp - One Set\n
1
Each
5
1.05
Supply erection, testing of ISI marked copper wire for 2 Nos motors with under ground system in PVC and flexible pipes copper wire size 85mm Sq three core complete in all respects with accessories like thimble etc
100
Per mtr
6
1.06
Providing and fixing of DI specials such as tee, bend, reduer etc. complete in all respect for laying of raw water rising main
10000
Per kg
7
1.07
Provision for intrnal light fitting inside of Pump Chamber at raw water pumping station near canal upto 10 points
1
job
8
1.08
Providing and fixing 100 watt LED street light complete in all respects
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
