| 1 | 1 | Acoustics and Wall Panelling | | | |
|---|
| 2 | 2 | Hunter Douglas Luxalon Perforated Aluminium Miniwave Cladding System:-Designing,providing & fixing of Luxalon® Plain/Perforated Miniwave Cladding system Valley Green (3360) manufactured by M/s. Hunter Douglas of approved colour consisting of 270 mm wide, 14 mm deep Panels with a 19 mm dia curved construction giving a corrugated construction of panel having length upto4 mtrs roll formed from 0.7 mm thick Aluminium Alloy for higher strength and good Roll forming characteristics. Panels shall be secured to the existing aluminium/MS structure by means of screws at a centre-tocentre distance of 1000 mm and the next panel shall overlap to the previous panel maintaining a uniform corrugation. Assembly of Miniwave is simple and fast. The panel fastening is made by means of rivet or screw on the flat part and hidden by snap \"male-female\", directly on the support structure of MS pipe 25 x 25 x 2 mm provided by client.Paint Finish : Panel shall be finished with Exterior powder or coil coated, in approved colour on the exposed side & primer coat on the reverse side. PANEL CHARACTERISTICS:This panel has been designed to be used as vertical or horizontal cladding; this panel can be perforated to be used in applications in passive solar control and acoustic solutions..\" | | 410 | Sq m |
|---|
| 3 | 3 | Providing & Fixing of Anutone Synth 50mm thick (1000 GSM Density) Thermally bonded, chemically free, eco-friendly, healthy-does not itch. It stays in position for lifetime, does not sag down in partitions and panelling, density fidelity assured.Finish : Polyfibre, Core : Polyfibre, Thickness (mm) : 50 , Fire (Class) : IS-15061 / BS-3119, NRC : Upto 0.7, Thermal (W/mk) : 0.04, Climate (degree C, RH) : 49, 95, Light (%) : na, Green (VoC, RC%) : Low, 25, Warranty (Years) : 5, Maintenance : Vaccume. | | 385 | Sq m |
|---|
| 4 | 4 | Auditorium Chairs | | | |
|---|
| 5 | 5 | Supply and Installation for Auditorium Chairs with chemical bolts. : The seat should be made of Polyurethane Foam moulded with 1.5 ±0.1cm. thk. plywood insert arid upholstered with fabric. * Approx. Seat Size: Depth: 42.0cm. Width @ rear: 44.0cm. Width @ front: 41.0cm. 2. BACKREST ASSEMBLY: The back assembly should be flexing type and made of Polyurethane Foam moulded with MS. tubular frame insert and upholstered with fabric and back cover. The insert should be made of 01.9 ±0.02cm x 0.16 ±0.0.128cm. thk.MS tubular frame with flexible nylon straps running across the length and width of the frame. * Approx. Back Size: Height: 65.5cm. Width @ top: 34.5cm. Width @ seat level: 46.0cm. 3. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density = 45 +1-2 kg/m3. . OLYURETHANE FOAM: The Polyurethane foam should be moulded with density = 45 ±2 kglcu.m . COVERS: The back cover and mechanism cover should be vacuum formed from black ABS sheets. 6. ARMREST ASSEMBLY: The Armrest understructure should be upholstered PU foam moulded with MS insert. Arm _tops should be made of black Integral Skin polyurethane with 50-70 Shore 'A' Hardness & reinforced with wooden insert. Armrest width = 7.0 ±0.5cm and should be offered as common / individual armrest between chairs. 7. UNDERSTRUCTURE: • MS black powder coated ( DFT 40-60 microns ) under structure with integrated, auto tip-up mechanism which folds the seat when not should be use. • Footprint should be a of base plate: made of HR steel 15.0 ±0.2cm X 22.0 ±0.2cm X 0.5 ± 0.05 cm thick. • Backrest supporting beam width: 46.0 ±0.2cm.(L) x 8.0 ±0.03cm. x 4.0 ±0.03cm. x 0.2 ±00.16cm MS tube. • Understructure fixed to ground by anchors with washer and nut mid back auditorium chair with chemical bolts.All metal components should be of MS CRCA of Tata Steel or Sail or Jindal Steel and pre treated with zinc phosphating in 8 tank process and then powder coated with epoxy polyster powder coating of Kansai Nerolac Paints or Asian Paints. Test reports conforming to relevant ISI codes for raw material, powder coating/ anodizing with anti-rust surface treatment shall strictly comply with IS:13871 (1993) inclusive of method of tests i.e. Dry film/ coating thickness, Finish, Gloss 60°, Colour retention, Scratch hardness, Impact resistance test, DFT measurement, Salt spray test, Adhesion Cross cut test. Goods should be supplied in knocked down construction and should have low VOC emission. The manufacturer shall have Inhouse manufacturing facility and shall have membership/ certification from ISO 9001-QMS, ISO14001 EMS, OHSAS 18001,IIID,AIOTA & BIFMA. | | 160 | Nos |
|---|
| 6 | 6 | Audio | | | |
|---|
| 7 | 7 | Column speaker with an extraordinary sound and surprising high power for use in all applications where audibility of music and speech is most important. It should features a speaker section with 6 x 2\" drivers, capable of producing a power up to 60 Watt and is equipped with a 100V line transformer with 4 different power taps which are selectable with a recessed adjuster screw behind the front cover. The speaker should also be fitted with a 20 Watt transformer. The power taps that can be selected are 20 Watt, 10 Watt, 5 Watt and 2.5 Watt and there should also be an internal switch provided for 12 Ohm impedance. The housing is made of aluminium, making it a stylish, light-weight column speaker and the especially designed wall bracket makes it possible to focus the speaker in any direction, to obtain the best possible audibility. Available in black (/B) and white (/W). | | 10 | Nos |
|---|
| 8 | 8 | Professional 100V multi-channel power amplifiers. Should offers two channels and has an output power of 240 Watt, it should be a flexible solution for multi-zone audio distribution systems with two independent zones. It should be as designed as the amplifiers has only the necessary controls and connections which creates great simplicity in use and installation. RMS Power 2x240 Watt, Frequency response 50Hz-22KHz, Signal to noise ratio . 100dB, Crosstalk < 80dB, Technology Class-D Amplifier, Power Supply should be switching mode, Input Impedence 10K ohms balanced, Output Impedence 100V (42 ohms), Common Mode rejection ratio 70dB, Protections like DC Short Circuit / Over Heating / Over Load / Signal Limiting. There should be temperature controlled Fan. And this all should be housed into a solid constructed, double rack space (2 HE) 19” rack mounting housing. | | 1 | Nos |
|---|
| 9 | 9 | Profesional Mixer with 12-channel with 100 digital effect presets and compressor, 6 microphone channels and 4 stereo line inputs, Powerful 3-band equalizer,2 stereo channels with 2-band EQ, Infinitely adjustable compressor, Digital effects section with 100 presets, Master, monitor and headphone outputs, Frequency response: 10-45000 Hz, Power supply with integrated power supply.Mono Mic/Line input channels: 6, Mono Mic/Line input connections: 6.3 mm stereo jack , XLR, Mono mic input type: electronically balanced. Stereo channels: Stereo Line input channels: 4, Stereo line input connections: 6.3 mm stereo jack, RCA, Stereo line input type: unbalanced. | | 1 | Nos |
|---|
| 10 | 10 | Handheld Microphone for presenter, Frequency response 50 to 16,000 Hz (–3 dB), THD = 0.9%, Pick-up pattern: cardioid, Signal-to-noise ratio: = 103 dBA, RF output power: 10 mW | | 5 | Nos |
|---|
| 11 | 11 | Video | | | |
|---|
| 12 | 12 | Projector 5000 Lumen Laser WUXGA, Horizontal and Vertical Lense Shift, 360 degree projection, Contrest Ratio 3000000:1, DICOM Mode, Should have provision for wired remote, Lamp Life 20000 Hrs, Throw Ratio 1.3-2.8, Zoom 1.6X, Connectivity USB Mini x1, RS232 In x1, USB Type A x1, HDBT x 1, HDMI x3, HDMI Out x1, S-Video in x1, Composit Video x1. Supplied with all acessories Supplied with 135\" High gain matte white screen motorised, 16:10 aspect ratio. | | 1 | Nos |
|---|
| 13 | 13 | Digital Podium for unmatched Interactivity among various digital devices with its slim design podium which allows you to communicate with your audiences more effectively. Includes Body with visualiser Tray, 21.5\" Touch Screen Monitor, 1 lapel, 1 Handheld, 1 Gooseneck Mic, Amplifier, Speaker Pair and Laptop interface with inbuilt Controller and but on pad with Source selection, Audio, Projector, Screen Control. | | 1 | Nos |
|---|
| 14 | 14 | LFD 65\" 4K display mounted on ceiling, Brightness 500 nits, 20W Audio, Minimum 2 HDMI, Wireless Screen Share Software. Should be supplier with one matrix switcher to get it linked to the main projection system. Matrix switcher should be able to deliver 4k contents with 2 inputs and 4 outputs. | | 2 | Nos |
|---|
| 15 | 15 | 4k Handycam, CMOS Sensor, with built in image processor, 62mm filter diameter lense, Aparture F2.8-F4.5, Focal Distance f= 9.3–111.6 mm, 12X Optical Zoom, LCD Screen 8.8 cm with touch panel, High speed recording, WiFi ans NFC enabled, HDMI, Microphone Jack, Memory card slot. With celing mounting provision, controling through digital Podium/ Tab / Mobile App | | 1 | Nos |
|---|
| 16 | 16 | Air Conditioner | | | |
|---|
| 17 | 17 | Supplying, installing, testing and commissioning split type variable speed inverter technology room Air conditioning unit 2 TR capacity having ISEER minimum 4.50 suitable to operate on 250V, 50 cycles, A.C. supply having 1 no. of air handling unit hi-wall/ floor mounting type complete with Refrigerants R410 A /R32 and copper condenser at position. specification no. APAC/ SAC (3-2-7) pg 50 | | 14 | Nos |
|---|
| 18 | 18 | Horizontal MAIN FRONT CURTAIN | | | |
|---|
| 19 | 19 | Horizontal MAIN FRONT CURTAIN: The complete automatically motorized Stage curtain system with additional modified Gearbox fitted with sealed bearings self-lubricating centre split overlapped curtains both sides opening fully automatic Stage Curtain fixing steel rails track, 620 GSM Fire Ratadent Fabric, double gathering Curtain cloth drapery horizontal sliding arrangement complete with fixing rails, brackets and motorized operation complete with runners, master runners, pullies, 3mm steel wire rope, 1 HP Motor (Crompton or Godrej) 2 Nos Air Breaker Contractors (L&T/SIEMENS), 2nos. Micro Switches for auto stop, 3 nos push buttons for forward. All rollers are sliding with roller clamp, The curtain should be half of full width operated from control panel with control switches. The Curtain should be draped to half area when in closed position. Minimum overlap at centre should be 900mm. The curtain should be stitched in double gathering with Provision for fully automatic operation only. Size as per actual FABRIC Thickness : 620 GSM Fire Retardant FABRIC SPECIFICATION : Velvet, Molfin or Hitech Fabric Fabric Make : RAYMONDS, RELIANCE & TEXTILE PRO The Work Shall be executive as per drawing s , Specification & instruction of engineer in charge. Size 9mtrs X 2.8 mtr | | 1 | Nos |
|---|
| 20 | 20 | STAGE FRILLS: made out of, 620 GSM double gathering Glazed Velvet, Molfin, Mokel or Hitech Fabric; to be installed above the stage on 28mm dia GI pipe adjustable at position according to stage positioning plan; Cloth material of desired shade with Stitching. FABRIC Thickness : 620 GSM Fire Retardant FABRIC SPECIFICATION : Velvet, Molfin or Hitech Fabric. Fabric Make : RAYMONDS, RELIANCE & TEXTILE PRO (Size 9mtrs X 0.75 mtr)\nThe Work Shall be executed as per , Specification including cost of any support structure required as per site condition & instruction of engineer in charge.\n | | 1 | Nos |
|---|
| 21 | 21 | Flooring | | | |
|---|
| 22 | 22 | Flooring for Auditorium :- Eternal Heterogeneous Vinyl - Providing & laying 2.0 mm thick approved Vinyl Flooring as per EN-ISO 10582, made up of PUR pearl lacquering protection technique as per manufacturers specifications. The product Should have 0.7mm transparent compact wear layer to provide better performance. A non woven, fully impregnated, glass fleece layer functions as the backbone of the flooring. The Vinyl flooring mustl conform to all standards, including the new VOC emission classes. The welding / seaming shall be done using hot air welding gun. Thickness as per EN-ISO 24346 : 2.0 mm, Roll width as per ENISO 24341 : 2 m, Wear Layer as per EN-ISO 24340 : 0.7mm, Roll Length as per EN-ISO 24341 : = 25 m, Abrasion Resistance EN-660-2 : Group-T, Commercial use as per EN-ISO 10874 : CLASS 34 very heavy, Light Industrial use as per EN-ISO 10874 : Class 43 heavy, Resistance to chemicals as per EN-ISO 26787: very good, Reaction to fire as per EN13501-1: Bfl-s1, Slip Resistance as per DIN51130 R10, Residual Indentation as per EN-ISO 24343-1 : <0.05mm, typical value 0.03mm, Method of Installation: Vinyl Flooring to be installed over existing Cementitious self leveling compound flooring. Approved Make : Forbo, Hunter Douglas, Saint Gobin, Remi | | 1 | Nos |
|---|
| 23 | 23 | Cable & Accessories | | | |
|---|
| 24 | 24 | Supply, Installation, Laying, Testing & Commissioning of Data Signal Cabling for Remoter Curtain s: Dual control of curtain operations one at stage and one in control room including control wiring Using 4-core PVC insulated multistranded cable to transmit Signal through curtain drives . high speed data cable designed for EIA485 ; lowcapacitance, twisted pair shielded ;FHDPE insulation, for interlinking splitter to Control Room with required connectors (1 main +1 backup) Providing and fixing control panel for with 4 x 1.5 sq.mm PVC copper cable as per IS fitted with control and indicators for Curtains installed on Stage. (Length require as per site condition refer drawing) | | 1 | Nos |
|---|
| 25 | 25 | Network Switch :- Supply, installation, testing and commissioning of Network Switch of 8 port having power over Ethernet Switch for Network/LAN access point. Make/Model: Netgear/D-Link | | 1 | Nos |
|---|
| 26 | 26 | Wireless Router :- Supply, installation, testing and commissioning of Wireless Router for Wireless Connection of Touch Panel and Processor Make/Model :Netgear/D-Link Supplying, fixing, and configuring broadband ADSL router with all accessories, on provided rack or as directed as per specification No. WG-NWC/ADSL | | 1 | Nos |
|---|
| 27 | 27 | Patch Cords: - Supplying and fixing 3 meter length, UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC(1-12-9) | | 3 | Nos |
|---|
| 28 | 28 | CAT-6 Cable: - Supplying & installing UTP networking cat-6 cable with rodent proof jacket suitable for LAN / WAN Computer net-working as per specification No. WG-COC/NC (1-12-6 )(New) | | 50 | Mts |
|---|
| 29 | 29 | Presentation Switcher:- Supply, installation, testing and commissioning of Digital Media Presentation Switcher/Controller/ Scaler : 10X1 Digital Switcher or better with 4K resolution; Min 4x HDMI Inputs ,min 2 VGA inputs & min 2 DM Inputs with min 1 HDMI output and min 1 HDBaseT Copied output; 3 Series Controller with 1X RS232 ports or better, 1X IR or better, 2 X Relay or better & Ethernet control or better. Make/Model :Crestron / AMX / Extron | | 1 | Nos |
|---|
| 30 | 30 | Supplying erecting VGA cable to be laid in Provided conduits and Terminating as per specifications having 15mtr cord length with male/female VGA connectors as per requirements complete | | 7 | Nos |
|---|
| 31 | 31 | Supplying and fixing tool-less information outlet (Ethernet) flush/surface type in provided modular box as per specification no. WG-NAS/IO (1-14-2) pg no 25. | | 3 | Nos |
|---|
| 32 | 32 | Supplying, installing & testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC. | | 3 | Nos |
|---|
| 33 | 33 | Supplying & installing HDMI cable low voltage grade as per specification as per specifications having 25 mtr cord length with male/female 19pin HDMI connectors as per requirements complete. | | 2 | Nos |
|---|
