Tender For Mla Lad Fund Reconstruction Of Existing Chaupal At Bapa Nagar Pyare Lal Road Gali No 3 Karol Bagh Ac 23
Tender Value
13.34 Lakhs
Estimated cost
Bid Submission
26 Sep 2019
0 days left
EMD
28000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Karol Bagh → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
tender for Mla Lad Fund Reconstruction Of Existing Chaupal At Bapa Nagar Pyare Lal Road Gali No 3 Karol Bagh Ac 23
BOQ
| N.O.W. : MLA LAD FundSub-Head : Reconstruction of existing chaupal at Bapa Nagar, Pyare Lal Road Gali No.-3, Karol Bagh AC-23. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.\r\nIn cement mortar\r\n | 38.97 | cum | |
| 2 | 2 | Demolishing mud phaska in terracing and disposal of material within 50 metres lead.\r\n | 11.92 | cum | |
| 3 | 3 | Dismantling stone slab roofing over wooden karries or R.C.C. battens (dismantling karries and battens to be paid for separately), including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.\r\n | 3.18 | cum | |
| 4 | 4 | Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead :\r\nOf sectional area 40 square centimetres and above\r\n | 1.93 | cum | |
| 5 | 5 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :\r\nOf area 3 sq. metres and below\r\n | 4 | each | |
| 6 | 6 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.\r\nNominal concrete 1:3:6 or richer mix (i/c equivalent design mix)\r\n | 7.95 | cum | |
| 7 | 7 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :\r\nCement mortar 1:6 (1 cement : 6 coarse sand)\r\n | 28.58 | cum | |
| 8 | 8 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in :\r\ncement mortar 1:4 (1 cement : 4 coarse sand)\r\n | 88.26 | sqm | |
| 9 | 9 | Centering and shuttering including strutting, propping etc. and removal of form for:\r\n\r\nSuspended floors, roofs, landings, balconies and access platform\r\n | 80.05 | sqm | |
| 10 | 10 | Centering and shuttering including strutting, propping etc. and removal of form for:\r\n\r\nColumns, Pillars, Piers, Abutments, Posts and Struts\r\n | 59.84 | sqm | |
| 11 | 11 | Centering and shuttering including strutting, propping etc. and removal of form for:\r\n\r\nLintels, beams, plinth beams, girders, bressumers and cantilevers\r\n | 31.29 | sqm | |
| 12 | 12 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :\r\n1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).\r\n | 4.16 | cum | |
| 13 | 13 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).\r\n | 14.75 | cum | |
| 14 | 14 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.\r\nThermo-Mechanically Treated bars of grade Fe-500 D or more.\r\n | 2363.75 | Kg | |
| 15 | 15 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).\r\nSecond class teak wood\r\n | 0.55 | cum | |
| 16 | 16 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.\r\n35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws\r\n | 12.32 | sqm | |
| 17 | 17 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.\r\n | 132.12 | sqm | |
| 18 | 18 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :\r\n1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size).\r\n | 2.5 | cum | |
| 19 | 19 | 15 mm cement plaster on the rough side of single or half brick wall of mix :\r\n1:4 (1 cement: 4 fine sand)\r\n | 196.42 | sqm | |
| 20 | 20 | 12 mm cement plaster of mix :\r\n1:4 (1 cement: 4 fine sand)\r\n | 77.1 | sqm | |
| 21 | 21 | 6 mm cement plaster of mix :\r\n1:3 (1 cement : 3 fine sand)\r\n | 91.5 | sqm | |
| 22 | 22 | Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3kg/sqm\r\n | 1.73 | sqm | |
| 23 | 23 | Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness.\r\n | 1.73 | sqm | |
| 24 | 24 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer- in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer- in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge :\r\nWith average thickness of 120 mm and minimum thickness at khurra as 65 mm.\r\n | 79.46 | sqm | |
| 25 | 25 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.\r\n110 mm diameter\r\n | 29.6 | metre | |
| 26 | 26 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.\r\nBend 87.5°\r\n110 mm bend\r\n | 8 | each | |
| 27 | 27 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.\r\n110 mm\r\n | 12 | each | |
| 28 | 28 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :\r\nRange of three half stall urinals with 10 litre P.V.C. automatic flushing cistern\r\n | 1 | each | |
| 29 | 29 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :\r\nW.C. pan with ISI marked white solid plastic seat and lid\r\n | 1 | each | |
| 30 | 30 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:\r\nWhite Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap\r\n | 2 | each | |
| 31 | 31 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :\r\nRectangular shape 453x357 mm\r\n | 1 | each | |
| 32 | 32 | Providing and fixing soil, waste and vent pipes :\r\n100 mm dia\r\nSand cast iron S&S pipe as per IS: 1729\r\n | 14.4 | metre | |
| 33 | 33 | Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes :\r\n100 mm dia pipe\r\n | 16 | each | |
| 34 | 34 | Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. :\r\nFor 100 mm dia pipe\r\n | 10 | each | |
| 35 | 35 | Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete :\r\n100x100x100x100 mm\r\nSand cast iron S&S as per IS - 1729\r\n | 1 | each | |
| 36 | 36 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. INTERNAL WORK - EXPOSED ON WALL\r\n15 mm dia nominal bore\r\n | 12 | metre | |
| 37 | 37 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. INTERNAL WORK - EXPOSED ON WALL\r\n25 mm dia nominal bore\r\n | 12 | metre | |
| 38 | 38 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. INTERNAL WORK - EXPOSED ON WALL\r\n32 mm dia nominal bore\r\n | 42.5 | metre | |
| 39 | 39 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :\r\n32 mm nominal bore.\r\n | 2 | each | |
| 40 | 40 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.\r\nCircular tank\r\n | 2000 | per litre | |
| 41 | 41 | Providing and fixing PTMT, push cock of approved quality and colour.\r\n15 mm nominal bore, 80 mm long, weighing not less than 46 gms\r\n | 5 | each | |
| 42 | 42 | Providing and fixing PTMT pillar cock of approved quality and colour\r\n15 mm nominal bore, 107 mm long, weighing not less than 110 gms\r\n | 5 | each | |
| 43 | 43 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :\r\n300x16 mm\r\n | 3 | each | |
| 44 | 44 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :\r\n250x16 mm\r\n | 5 | each | |
| 45 | 45 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :\r\n250x10 mm\r\n | 5 | each | |
| 46 | 46 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :\r\n125 mm\r\n | 10 | each | |
| 47 | 47 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).\r\n | 50 | kg | |
| 48 | 48 | Applying priming coat:\r\nWith ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)\r\n | 29.56 | sqm | |
| 49 | 49 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :\r\nTwo or more coats on new work\r\n | 29.56 | sqm | |
| 50 | 50 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.\r\n | 61.88 | sqm | |
| 51 | 51 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :\r\nNew work (two or more coats) over and including water thinnable priming coat with cement primer\r\n | 287.919 | sqm | |
| 52 | 52 | Finishing walls with textured exterior paint of required shade :\r\nNew work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm\r\n | 77.07 | sqm | |
| 53 | 53 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.\r\n | 63.95 | cum | |
| 54 | 54 | Grading roof for water proofing treatment with\r\nCement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)\r\n | 0.63 | cum | |
| 55 | 55 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :\r\n25 mm thick\r\n | 85.83 | sqm | |
| 56 | 56 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.\r\n | 26.04 | sqm | |
| 57 | 57 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete.\r\n | 1.73 | sqm | |
| 58 | 58 | Brick work with bricks in Cement Motar 1:6 (1Cement : 6 Coarse sand) in foundation and plinth (Bricks Shall be supplied by department free of cost at site of work).\r\n | 7.79 | Cum | |
| 59 | 59 | Cost Index @(+)15.69% on SR&DR | item9 | 1 | Nos |
| 60 | 60 | As per GNCTD Order @ (-)9.5% | 1 | Nos |
AI Tender Summary
Tender Timeline
Sep 17, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedSep 26, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 26, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender