Construction Of Ground With 2 Floor Residential Staff Quarter . ( 29 )
Tender Value
60 Lakhs
Estimated cost
Bid Submission
21 Sep 2019
0 days left
EMD
1.20 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nathdwara → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Ground With 2 Floor Residential Staff Quarter . ( 29 )
BOQ
| Name of Work: Construction of G+2 floor residential staff Quarter. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work in excavation in foundation trernches or drains including dressing of sides and ramming of bottoms , lift up to 1.5Mtr including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 Mtr. Ordinary rock | BI01010001010000000000000515BI0100001113 | 185 | CUM |
| 2 | 2 | Filling available excavated earth (excluding rock) in trernches, plinth side of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering including lead upto 50 meter and lift upto 1.5meter | BI01010001010000000000000515BI0100001114 | 108.05 | CUM |
| 3 | 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 m nominal size). | BI01010001010000000000000515BI0100001115 | 35.55 | CUM |
| 4 | 4 | Random rubble masonry with hard stone in foundation and plinth : Cement mortar 1:6 (1 cement : 6 coarse sand) | BI01010001010000000000000515BI0100001113 | 34.5 | CUM |
| 5 | 5 | Centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete. | BI01010001010000000000000515BI0100001114 | 276.65 | SQM |
| 6 | 6 | Centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts. | BI01010001010000000000000515BI0100001115 | 345.35 | SQM |
| 7 | 7 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level : : 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20\nmm nominal size) | BI01010001010000000000000515BI0100001113 | 10.49 | CUM |
| 8 | 8 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto two stories excluding cost of centring, shuttering, finishing and reinforcement : 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20\nmm nominal size) | BI01010001010000000000000515BI0100001114 | 41.61 | CUM |
| 9 | 9 | Brick work with FPS bricks of class designation 75 in superstructure above plinth level upto two stories in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) | BI01010001010000000000000515BI0100001115 | 128.06 | CUM |
| 10 | 10 | Centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform. | BI01010001010000000000000515BI0100001113 | 1047.59 | SQM |
| 11 | 11 | Reinforced cement concrete work in beams, suspended floors roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto two stories excluding the cost of centring, shuttering, finishing and reinforcement: M-20 Grade Concrete (1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) -As per design mix) | BI01010001010000000000000515BI0100001114 | 109.83 | CUM |
| 12 | 12 | Reinforcement for R.C.C. work at all levels including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars. | BI01010001010000000000000515BI0100001115 | 15983.8 | KG |
| 13 | 13 | Cement plastering including T&P, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 12 mm cement plaster of mix : 1:6 (1 cement : 6 fine/ coarse sand) | BI01010001010000000000000515BI0100001113 | 2513.58 | SQM |
| 14 | 14 | Random rubble dry stone Kharanja (soling) under floor. | BI01010001010000000000000515BI0100001114 | 35.2 | CUM |
| 15 | 15 | Kota stone slab flooring 25mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : Area of each slab 2001 to 5000 sqcm | BI01010001010000000000000515BI0100001115 | 49.05 | SQM |
| 16 | 16 | Half brick masonry with FPS bricks of class designation 75 in superstructure above plinth level upto two stories. Cement mortar 1:4 (1 cement :4 coarse sand) | BI01010001010000000000000515BI0100001113 | 405.93 | SQM |
| 17 | 17 | 6mm Cement plaster to ceiling of mix 1:3 (1 cement : 3 fine sand) | BI01010001010000000000000515BI0100001114 | 183.77 | SQM |
| 18 | 18 | Finishing walls with textured exterior paint of required shade :32.34.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including base coat of water proofing cement paint applied @ 2.20kg/10 sqm. | BI01010001010000000000000515BI0100001115 | 799.81 | SQM |
| 19 | 19 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides\nwith required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.\n(Glazing and panelling to be paid for separately) : Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) | BI01010001010000000000000515BI0100001113 | 258 | Kg |
| 20 | 20 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-incharge . (Cost of aluminium snap beading shall be paid in basic item) :With float glass panes of 5.50 mm thickness | BI01010001010000000000000515BI0100001113 | 33.6 | SQM |
| 21 | 21 | Providing brick kharanja in cement sand mortar 1:4 in square pattern over roof of ground floor. 75mm to 100mm thick average. | BI01010001010000000000000515BI0100001114 | 181.4 | SQM |
| 22 | 22 | Finishing with 25mm thick cement plaster on roofs in cement sand mortar 1:4 mix including water proofing compound @ 2% of cement used, with neat cement finished curing etc. complete in all respect including making of 300mm x 300mm square. | BI01010001010000000000000515BI0100001115 | 198.27 | SQM |
| 23 | 23 | Providing batta (gola) 75mmx75mm in cement concrete (1:2:4) including finishing with cement mortar 1:3 as per standard design. | BI01010001010000000000000515BI0100001113 | 125 | RMT |
| 24 | 24 | Stone work, plain in copings, cornices, string courses and plinth courses, upto 75 mm thick in Cement mortar 1:6 (1 cement : 6 coarse sand) including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade. | BI01010001010000000000000515BI0100001114 | 0.61 | CUM |
| 25 | 25 | Structural steel work riveted, bolted or welded in built up sections,trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: steel grill | BI01010001010000000000000515BI0100001115 | 800 | KG |
| 26 | 26 | Supplying and fixing fixed wire gauge of 14 meshx24 gauge to the metal frame of rolled section by metal beading 20x3 with suitable screw at not exceeding 150mm distance | BI01010001010000000000000515BI0100001113 | 48 | SQM |
| 27 | 27 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides including approved ISI marked Stainless Steel butt hinges fittings with necessary screws complete as per annexure 'A' : 30 mm thick Decorative teak veneer both side | BI01010001010000000000000515BI0100001114 | 54.7 | SQM |
| 28 | 28 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides including approved ISI marked Stainless Steel butt hinges fittings with necessary screws complete as per annexure 'A' : 25 mm thick Decorative teak veneer both side | BI01010001010000000000000515BI0100001115 | 19.53 | SQM |
| 29 | 29 | Wall painting with plastic emulsion paint of approved brand andmanufacture to give an even shade:\n32.49.1 Two or more coats on new work | BI01010001010000000000000515BI0100001113 | 1713.77 | SQM |
| 30 | 30 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work | BI01010001010000000000000515BI0100001114 | 48 | SQM |
| 31 | 31 | Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). | BI01010001010000000000000515BI0100001115 | 150 | SQM |
| 32 | 32 | Extra for using size above 200x300mm in glazed tiles and for using 400mm x 400mm MAT finished tiles in place of 300mm x 300mm size. | BI01010001010000000000000515BI0100001113 | 150 | SQM |
| 33 | 33 | Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). | BI01010001010000000000000515BI0100001114 | 23.81 | SQM |
| 34 | 34 | P & F 1st quality Vitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete. Size 600 mm X 600 mm | BI01010001010000000000000515BI0100001115 | 95.56 | SQM |
| 35 | 35 | Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Jhunjhunu / Jalore (Red / Choclate Colour) Above 3601 Cm2 Slabs | BI01010001010000000000000515BI0100001113 | 187 | SQM |
| 36 | 36 | Providing and fixing 50 mm dia G.I. steel pipe railing in 3 rows duly painted on medium weight steel channels (ISM C series) 100 mm x\n50 mm, 1.2 metres high above ground, 2 m centre to centre, complete as per approved drawings including all material, labour. | BI01010001010000000000000515BI0100001114 | 16.46 | RMT |
| 37 | 37 | Sanitary PART-B Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat lid with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40mm flush bend 20mm over flow pipe with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend. | BI01010001010000000000000515BI0100001115 | 6 | Nos. |
| 38 | 38 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. | BI01010001010000000000000515BI0100001113 | 6 | Nos. |
| 39 | 39 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow operated levers. | BI01010001010000000000000515BI0100001113 | 12 | NO |
| 40 | 40 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250mm. | BI01010001010000000000000515BI0100001114 | 6 | Nos. |
| 41 | 41 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore. | BI01010001010000000000000515BI0100001115 | 48 | Nos. |
| 42 | 42 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm nominal bore | BI01010001010000000000000515BI0100001113 | 6 | Nos |
| 43 | 43 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore. | BI01010001010000000000000515BI0100001113 | 12 | Nos |
| 44 | 44 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115 mm nominal bore | BI01010001010000000000000515BI0100001114 | 15 | Nos |
| 45 | 45 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. Concealed pipe including painting with anti corrosive bitumastic\npaint, cutting chases and making good the wall.Internal work 15 mm dia. nominal bore | BI01010001010000000000000515BI0100001115 | 300 | meter |
| 46 | 46 | 25 mm dia. nominal bore | BI01010001010000000000000515BI0100001113 | 250 | meter |
| 47 | 47 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. Concealed pipe including painting with anti corrosive bitumastic\npaint, cutting chases and making good the wallExternal work :50 mm dia. nominal bore | BI01010001010000000000000515BI0100001114 | 95 | meter |
| 48 | 48 | 40 mm dia. nominal bore | BI01010001010000000000000515BI0100001115 | 60 | meter |
| 49 | 49 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 453x357mm | BI01010001010000000000000515BI0100001113 | 12 | Each |
| 50 | 50 | Providing and fixing PTMT Bottle Trap for Wash basin and sink.Bottle trap 38mm single piece moulded with height of 270mm, effective length of tail pipe 265mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighting not less than 263gms. | BI01010001010000000000000515BI0100001114 | 9 | Each |
| 51 | 51 | Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with minimum distances of 37mm from wall face with concealed fittings rrangement of approved quality and colour. Weighing not less than 88 gms. | BI01010001010000000000000515BI0100001115 | 6 | Each |
| 52 | 52 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour.600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms. | BI01010001010000000000000515BI0100001113 | 6 | Each |
| 53 | 53 | S.C.I. gully or nahani grating 100 mm dia | BI01010001010000000000000515BI0100001114 | 15 | Each |
| 54 | 54 | Providing and fixing gun metal gate valve with C.I. wheel ofapproved quality (screwed end) :40 mm nominal bore | BI01010001010000000000000515BI0100001115 | 6 | Each |
| 55 | 55 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :25 mm nominal bore | BI01010001010000000000000515BI0100001113 | 6 | Each |
| 56 | 56 | Constructing masonry Chamber 60x60x75 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design :With F.P.S. bricks | BI01010001010000000000000515BI0100001114 | 5 | Each |
| 57 | 57 | Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved qualiSquare shape 450mm internal dimensions | BI01010001010000000000000515BI0100001115 | 5 | Each |
| 58 | 58 | Constructing brick masonry road gully chamber 50x45x60 cm with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm precast R.C.C. horizontalgrating with frame complete as per standard design :With bricks | BI01010001010000000000000515BI0100001113 | 2 | Each |
| 59 | 59 | Providing and fixing on wall face Unplasticised Rigid PVC Single socketed pipes rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.110 mm diameter | BI01010001010000000000000515BI0100001114 | 85 | Rm |
| 60 | 60 | Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.Coupler 110 mm | BI01010001010000000000000515BI0100001115 | 200 | Each |
| 61 | 61 | Single tee without door | BI01010001010000000000000515BI0100001113 | 15 | Each |
| 62 | 62 | Bend 87.5° | BI01010001010000000000000515BI0100001113 | 15 | Each |
| 63 | 63 | Shoe (Plain) | BI01010001010000000000000515BI0100001114 | 15 | Each |
| 64 | 64 | clips | BI01010001010000000000000515BI0100001115 | 50 | Each |
| 65 | 65 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. | BI01010001010000000000000515BI0100001114 | 12 | Each |
| 66 | 66 | C.P wall Mixture Telephonic Type Crutch & Telephonic Shower | BI01010001010000000000000515BI0100001113 | 20 | nos |
| 67 | 67 | P & F Jet Spray For water Closet With C.P. coper Tube Flang of Approved Make | BI01010001010000000000000515BI0100001114 | 22 | nos |
| 68 | 68 | P & F C.P. Shink Mixture With Swinging Spout J Pipe | BI01010001010000000000000515BI0100001115 | 2 | nos |
| 69 | 69 | Bottle trap stainless steel make | BI01010001010000000000000515BI0100001113 | 18 | Nos |
| 70 | 70 | metro pole flush valve | BI01010001010000000000000515BI0100001114 | 6 | Nos |
| 71 | 71 | PART-C ELECTRICAL P & F 18 SWG Sheet steel boxes duly finished with two coats of red oxide and with earthing terminal of following sizes (nominal size) on surface or in recessed as required.75mmx75mmx50mm | BI01010001010000000000000515BI0100001115 | 6 | Each |
| 72 | 72 | 100mm x 100mm x 50mm | BI01010001010000000000000515BI0100001113 | 6 | each |
| 73 | 73 | 175mm x 100mm x 60mm | BI01010001010000000000000515BI0100001114 | 6 | each |
| 74 | 74 | 150mm x 75mm x 60mm | BI01010001010000000000000515BI0100001115 | 3 | each |
| 75 | 75 | 200mm x 150mm x 60mm | BI01010001010000000000000515BI0100001113 | 3 | each |
| 76 | 76 | 225mm x 100mm x 60mm | BI01010001010000000000000515BI0100001114 | 3 | each |
| 77 | 77 | 300mm x 375mm x 100mm | BI01010001010000000000000515BI0100001115 | 2 | each |
| 78 | 78 | 200mm x300 mm x 75 mm | BI01010001010000000000000515BI0100001113 | 2 | each |
| 79 | 79 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required.1 x 2.5 sq.mm | BI01010001010000000000000515BI0100001114 | 150 | mtr |
| 80 | 80 | 1 x 1.5 sq.mm | BI01010001010000000000000515BI0100001115 | 100 | mtr |
| 81 | 81 | 1 x 4.0 sq.mm | BI01010001010000000000000515BI0100001113 | 100 | Mtr |
| 82 | 82 | P & F of IP20 LED Ceiling/ Recessed/ suspended mounting light fixture made form CRCA sheet steel housing, high purity/ transmisivity diffuser for uniform light distrubution.High efficiency driver electronics having efficiency > 85% and in compliance to IEC standards.(integral driver). Power consumption of 40 W/50W/60W, 3000/3300/4200 lumens, system lumen efficiency of 70-80 lm / Watt output suitable for 2x36WFTL/ 2x36w CFL/3x36w CFL light fixtures, life time of 50000 burning Hours with 70% intial Lumens maintained. CCT 3000° K, 4000° K and 6000° K. Fixture shall be CE compliance.36W LED Light 2’x2’ with acrylic/ prismatic front cover | BI01010001010000000000000515BI0100001114 | 12 | each |
| 83 | 83 | P & F of IP20 LED Recessed/ Surface Mounted Round/ sqaure Non Dimmable Downlight with die-cast aluminum housing & Heat sink for heat dissipation, high purity reflector with external driver having efficiency > 85% and in compliance to IEC standards. ( supplied together with luminaire) Power consumption of =<7w/10w/8w/12w/15w/18W with 100/500/750/1100/1250 lumens, system lumen, efficeancy of 70 lm / Watt or 100 lm / Watt output suitable to replace 1x18W/ 2x18w/2x26w CFL downlights, life time of 50000 Burning Hours with 70% of intial Lumen maintained. CCT 3000° K, 4000° K and 6000° K. Fixture shall be CE Compliance.LED downlight 9/10/12 W | BI01010001010000000000000515BI0100001115 | 50 | each |
| 84 | 84 | P & F of IP20 LED batten type light fixture made from CRCA sheet stlle housing suitable for mounting LED tube system (integral driver), Power consumption of 18W/36W, 1500/3000 lumens, system lumen efficiency 80 lm/ watt output, life time of 50000 burning hours with 70% initial lumen maintained. CCT 3000° K, 4000° K and 6000° K.4’ LED Tube shape fixture 15W | BI01010001010000000000000515BI0100001113 | 6 | each |
| 85 | 85 | P & F following modular accessories made out of unbreakable and fire retardant poly carbonate with silver contacts including making connections testing etc. as6A one way switch | BI01010001010000000000000515BI0100001113 | 6 | each |
| 86 | 86 | 16 A one way switch | BI01010001010000000000000515BI0100001114 | 6 | Each |
| 87 | 87 | 6 A 3 pin shuttered socket | BI01010001010000000000000515BI0100001115 | 12 | each |
| 88 | 88 | 16 A 3pin shuttered socket | BI01010001010000000000000515BI0100001115 | 12 | each |
| 89 | 89 | SITC of quick make and quick break 4 POLE current limiting MCCB having following current rating, short circuit breaking capacity at 440/415 V, 50 Hz; O/L & S/C settings and conforming to IS 13947-2 / IEC 60947- 2 with front face and centralised adjustable, line load interchangeability, having positive isolation capability, provision for UVR , shunt trip ,earth fault trip, push (test) to trip , including making connections with lugs / spreaders etc. as requiredup to 100 Amp , 10 kA, fixed O/L & S/C setting | BI01010001010000000000000515BI0100001113 | 6 | each |
| 90 | 90 | Pipe Earthing as per IS:3043 with perforated 3.0 Mtr. Long, 40 mm dia. ' B ' class G.I. Pipe including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size 300mm x 300 mm and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance as required. | BI01010001010000000000000515BI0100001114 | 1 | each |
| 91 | 91 | Providing & Laying XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Armoured of IS:7098-I/1554-1 approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size.25 sq mm 4 core | BI01010001010000000000000515BI0100001115 | 100 | mtr |
| 92 | 92 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, round tiles,18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board & false ceiling point. 6 A switch, 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required.Short point (up to 3 mtr.) | BI01010001010000000000000515BI0100001113 | 50 | each |
| 93 | 93 | Medium point (up to 6 mtr.) | BI01010001010000000000000515BI0100001114 | 100 | Each |
| 94 | 94 | Long point (up to 10 mtr..) | BI01010001010000000000000515BI0100001115 | 80 | each |
| 95 | 95 | P & F double ball bearing capacitor start ceiling fan of approved make complete with regulator and other accessories as required. (for estimation purpose only)1200 mm sweep | BI01010001010000000000000515BI0100001113 | 18 | Each |
| 96 | 96 | P&F of Heavy duty capacitor start 900/1400 RPM single phase ISI marked Exhaust fan,IS:2312 marked in existing opening including making connections testing\netc. as required.450 mm sweep(900 RPM) | BI01010001010000000000000515BI0100001114 | 18 | Each |
| 97 | 97 | S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall and making good the same as required.25 mm | BI01010001010000000000000515BI0100001115 | 150 | RM |
| 98 | 98 | 32 mm | BI01010001010000000000000515BI0100001113 | 20 | RM |
| 99 | 99 | P&F 240/415 V MCB of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required.Single pole MCB & neutral MCB6 A to 32 A rating | BI01010001010000000000000515BI0100001114 | 40 | Each |
| 100 | 100 | P&F IS 371 marked 6 amp surface type ceiling rose incl. Making connection testing etc as reqd. (group-1) | BI01010001010000000000000515BI0100001115 | 18 | nos |
| 101 | 101 | P&F ISI marked 6 amp bakelite batten/angle holder incl. Making connection testing etc. as reqd. (group-1) | BI01010001010000000000000515BI0100001113 | 18 | nos |
AI Tender Summary
Tender Timeline
Sep 16, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedSep 21, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 23, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender