Pradhan Mantri Gram Sadak Yojana-PMGSY has published Tender For Civil Works - Roads:-Road From Tagangwarang To Anuksolung ( Pachi-Pipu Road To Dabiwa Solung ) ( Stage-Ii ) Road And Bridge Works. Submission Date for this Tender is 30-09-2019. Road Work Tenders in SE, RWD, Rupa Arunachal Pradesh. Bidders can get complete Tender details and download the document.
| Name of Work:-Road from Tagang Warang to Anuk Solung [Road fro Pipu road to Dabiwa Solung] (Stage-II). | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | S H : SETTING OUT | |||
| 2 | 2 | DPR preparation , Trace Cutting i/c Survey & Investigation for Hilly Areas. Sub mountainous area with cross slope between 10% to 25% | 22.5 | Each | |
| 3 | 3 | SUB-HEAD:- CRM side Drain | |||
| 4 | 4 | Construction of CRM side drain 15cm thick both side wall height 0.32cm in 1:4 CM with hardstone, cc base in M10(cc 1:3:6) 15cm thick i/c inside pointing in cement morter 1:4 i/c earthwork complete as per drawing and direction of engineer incharge. | 4400 | Rmtr | |
| 5 | 5 | SH: Hume HPC 1000 mm dia.TYPE-I (As per IRC SP-20-2002 & SP :48-1998) | |||
| 6 | 6 | Earthwork in excavation for foundation of structures upto 3 m depth as per drawing and technical specification Clause 1104 includding setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. | 612.01 | cum | |
| 7 | 7 | Plain Cement Concrete M10 (1:3:6 nominal mix) in levelling course below open foundation of Head walls as per drawings & Technical Specification Clause 1109 | 33.47 | cum. | |
| 8 | 8 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 [P.C.C. grade M 20 Nominal mix (1:2:4)] | 14.4 | cum. | |
| 9 | 9 | Bedding for Pipe [ Type A ( Concrete Cradle ) Bedding ] | |||
| 10 | 10 | Laying concrete cradle bedding with M15 Grade Cement Concrete as per Clause 1105 (i) | 29.85 | cum | |
| 11 | 11 | Stone Masonry Work in cement mortar in foundation of Head walls complete as per drawing and technical specification Clasue 1109 [In 1:4 cement mortar] | 300.25 | cum. | |
| 12 | 12 | Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in double row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets as per Clause 1106. [1000 mm dia] | 45 | mtr | |
| 13 | 13 | Providing and laying boulder apron for bed protection with stone boulders of minimum size and weight as per Table 1300.1, no fragment weighing less than 25 kg laid dry complete as per drawing and technical specifications Clause 1301 | 15.56 | cum | |
| 14 | 14 | Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8 [Granular material] | 200.625 | cum | |
| 15 | 15 | Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7 | 144 | nos | |
| 16 | 16 | Providing and laying filter material underneath pitching in slopes complete as per drawing and technical specifications Clause 1302 | 92.21 | cun | |
| 17 | 17 | Providing and laying reinforced cement concrete in superstructure as per drawing and technical specifications Clauses 800, 1205.4 and 1205.5 [R.C.C grade M 20 For design mix RCC M 20] | 25.68 | cum. | |
| 18 | 18 | Supplying, fitting and placing HYSD bar reinforcement (Fe 415) in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202 | 2.06 | ton | |
| 19 | 19 | SUB-HEAD:- EARTHEN SHOULDER | |||
| 20 | 20 | Compacting original ground supporting embankment Loosening, Levelling and Compacting original ground supporting embankmentto facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling | 113860 | cum | |
| 21 | 21 | Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as | 10548.8 | cum | |
| 22 | 22 | SH: Granular Sub-base with Well Graded Material (Table 400.1) By Mix in place methods | |||
| 23 | 23 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density complete as per Clayse 401.4 as per Technical Specification Clause 408.(i)Using naturally occuring gravel | 13130.4 | cum | |
| 24 | 24 | SUB-HEAD:- WBM Grading-III | |||
| 25 | 25 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN in static roller in stages to proper grade and camber, applying and brooming, stone screening to fill-up the intersties of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405 i) By Manual Means | 5124.89 | Cum | |
| 26 | 26 | SUB-HEAD:- P.M.C (Prime Coat of Medium porosity) | |||
| 27 | 27 | Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface granular base i/c cleaning of road surface and spraying primer @ 0.90 - 1.20 kg/sqm using mechanical means as per technical specification clause 502. | 68841.9 | Sqm | |
| 28 | 28 | Tack Coat | |||
| 29 | 29 | Providing and applying tack coat with bitumen emulsion (RS-I) using emulsion distributor @ 0.20 to 0.25 kg/sqm on the prepared bituminus surface cleaned with hydraulic broom as per technical specification clause 503. | 68841.9 | Sqm | |
| 30 | 30 | 20 mm thick open graded primix carpet using bitumineous binder. | |||
| 31 | 31 | Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508. | 68841.9 | Sqm | |
| 32 | 32 | SH: Seal Coat | |||
| 33 | 33 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510 | 68841.9 | Sqm | |
| 34 | 34 | SH: Sausage wire crated boulder Protection Structure | |||
| 35 | 35 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. | 1031.25 | cum. | |
| 36 | 36 | Providing and laying wire created boulder structures boulder size 22.5 cm to 45 cm having 25 kg average weight for each i/c dumping/laying in S.W.G. Wire mesh of 10 cm x 10 cm (woven diagonally) 4mm dia i/c packing with small size stone spalls and carrying of boulders from a lead of 50 mtr and lift up to 1.5 mtr i/c lying properly the mesh by cutting the mouth and hoisting of wire where felt necessary as per direction of Engineer-in-Charge technical specifications Clause 1301. ( Based on SDB Rural Road Chapter-14, Item No.14.2) | 1237.5 | cum. | |
| 37 | 37 | S H : SIGN BOARD & ROAD FURNITURE | |||
| 38 | 38 | Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 | |||
| 39 | 39 | 5th Kilometre Stone (precast) | 6 | Each | |
| 40 | 40 | Ordinary Kilometer Stone (Precast) | 24 | Each | |
| 41 | 41 | Providing and Fixing Citizen information Board of PMGSY Project(RCC)"A" | |||
| 42 | 42 | Providing and fixing of typical PMGSY Citizen information sign board with logo as per MORD specifications and attached drawing. Two M.S plates/boards of 1.6 mm thick, duly welded with MS flat iron cleat 50 mm x 5o mm size on edges. Top and botttom plate will welded to 2 nos. 75 mm tubes posts duly embedded in cement concrete M-15 grade blocks of 600 x 600 x750 cm below ground level . All MS will be stove enameled on both sides. Lettering and printing arrows, boarder etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and clour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1. The rate inclusive of all material, fitting and fixing at site etc. | 2 | Each | |
| 43 | 43 | Providing and Fixing PMGSY Logo Board at starting point | |||
| 44 | 44 | Providing and fixing of typical PMGSY Logo board as per MORD specifications and drawing of cast-in-situ RCC,(Size of RCC post 25cmx25cmx90cm below G.L. & 15cmx15cmx260cm above G.L.),(Size of board 1x 85cmx85cmx7.5cm, ) incl.earth work, finishing with 15mm pluster 1:4 and neat cement punning, applying priming coat, painting and lettering with appropiate colour with required shade of approved quality ready mix paint. | 1 | Each | |
| 45 | 45 | Providing and Fixing Title information Board of PMGSY Project(RCC) | |||
| 46 | 46 | Providing and fixing of typical PMGSY Citizen information sign board as per MORD specifications and drawing of cast-in-situ RCC,(Size of RCC post 25cmx25cmx90cm below G.L. & 15cmx15cmx245cm above G.L.),(Size of board 2x 90cmx80cmx7.5cm, ) incl.earth work, finishing with 15mm pluster 1:4 and neat cement punning, applying priming coat, painting and lettering with appropiate colour with required shade of approved quality ready mix paint. | 1 | Each | |
| 47 | 47 | Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level as per approved drawing and Technical Specification Clause 1701 | 20 | Each | |
| 48 | 48 | Provision and fixing of traffic signs for limited period at suitable locations in construction zone comprising of warning zone,approch transition zone,working zone and terminal transition zone with a minimum distance of 2-3 from the edge of the carriage way. the bottom edge of the lowest sign plate to be not less than 2m above the road level,fixed on600mmx699mmx6mm angle iron post, founded and installed as per approved design and drawings,removed and disposed of after completion of construction work,all as per IRC:SP:55-2001. | |||
| 49 | 49 | Diversion one km ahead | 2 | Each | |
| 50 | 50 | Road ahead closed | 2 | Each | |
| 51 | 51 | Men at work | 4 | Each | |
| 52 | 52 | Road closed | 2 | Each | |
| 53 | 53 | Stop | 2 | Each | |
| 54 | 54 | Slow | 2 | Each | |
| 55 | 55 | 50 mtr Long Span Bridge (LSB) | |||
| 56 | 56 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.Ordinary soil Upto 3 m to 6 mtr depth | 51.72 | cum | |
| 57 | 57 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203\nP.C.C grade M 10 Nominal mix 1:3:6 | 62.24 | cum | |
| 58 | 58 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203\nR.C.C. grade M 25 | 380.66 | cum | |
| 59 | 59 | Backfilling behind abutment, complete as per drawings & technical specification Clause 1204.3.8 | |||
| 60 | 60 | i)Granular Material | 53.2 | cum | |
| 61 | 61 | ii) Sandy Material | 230.8 | cum | |
| 62 | 62 | Providing weepholes in stone masonary, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technica | 112 | Nos | |
| 63 | 63 | Supplying, fitting and placing with TMT bar reinforcment (Fe 415) in foundation complet as per drawing and techanical specification Clauses 1000,&1202 | 8.36 | Mt | |
| 64 | 64 | Supplying, fitting and placing with TMt bar reinforcment (Fe 415) in substructure complete as per drawing and techanical specification Clauses 1002,1005,1010&1202 | 47.51 | Mt | |
| 65 | 65 | Supplying, fitting and fixing in position true to line and level cast steel rocker bearing conforming to IRC: 83(Pt.-1) section IX and clause 2003 of MoRTH specifications complete including all accessories as per drawing and Technical Specifications. | 2.2 | tonne capacity | |
| 66 | 66 | Supplying, fitting and fixing in position true to line and level forged steel roller bearing conforming to IRC: 83(Pt.-1) section IX and clause 2003 of MoRTH specifications complete including all accessories as per drawing and Technical Specifications. | 2.5 | tonne capacity | |
| 67 | 67 | Supplying fabricating and fixing in position steel Bailey Bridge including hand railing,post etc. and erecting the same with necessary stagging and strutting as per approve drawings and finished with two coats alluminium finished paint over two coats of zinc chromate primer including necesary load testing as specified in IRC code and also as directed by the Engineer-in-charge complete. | 1 | Job | |
| 68 | 68 | Protection Works : | |||
| 69 | 69 | Providing & laying of boulder apron laid in wire crates with 14mm dia GI wire conforming to IS : 280 in 100 mm x 100mm mesh (woven diagonally) including 10% extra for laps 7 joints laid with stone boulder weighing not less than 25 Kg each as per drawing and technical specifications Clause 1301 | 170 | cum | |
| 70 | 70 | Providing and laying Pitching on slopes laid over prepared Filter media asper drawing and technical specifications clause 1302 I. Stone Boulder | 150 | cum | |
| 71 | 71 | Providing and laying Filter material underneath Pitching in slopes complete asper drawing and technical specifications clause 1302 | 101 | cum | |
| 72 | 72 | SUB-HEAD:- MAINTENANCE | |||
| 73 | 73 | Maintenance for first year | |||
| 74 | 74 | Maintenance for second year | |||
| 75 | 75 | Maintenance for third year | |||
| 76 | 76 | Maintenance for fourth year | |||
| 77 | 77 | Maintenance for fifth year |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
