Tender For Construction Of Toilet -Civil Work Mahila Thana Raebareli Se Toylet Ka Nirman Karya
Tender Value
12.15 Lakhs
Estimated cost
Bid Submission
26 Sep 2019
0 days left
EMD
61000
Bank guarantee accepted
Document Fee
1500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
raebareli → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
tender for construction of toilet -Civil Work Mahila Thana Raebareli Se Toylet Ka Nirman Karya
BOQ
| Name of Work: PROPOSED TOILET BLOCK AT.- Mahila Thana Campus Raebareli | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work in exacavation in trenches for foundations and for pipes cables etc. in ordinary soil mixed moorum, shingle, kanker(loam clay or sand) including lift upto 1.5 m and dressing of sides and ramming of bottom sand disposal of surplus excavated earth as directed by the Engineer i/c with in a lead of 50m. | BI01010001010000000000000515BI0100001113 | 44.06 | CUM |
| 2 | 2 | Cement Concrete with 40 mm gauge approved stone ballast, coarse sand and cement in proportions of 8:4:1 including supply of all materials, labours,tools & plants etc. required for poper completion of the work, Excluding GST | BI01010001010000000000000515BI0100001114 | 10.66 | CUM |
| 3 | 3 | R.c.c. work with cement approved coarse sand and 2 cm. (3/4\") guage approved stone ballast in the proportion 1:1.5:3,(1cement :1.5 coarse sand :3 aggregate) in lintels of doors and windows excluding supply of reinforcement and its fixing and bending but including its fixing and binding the same necessary with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not be less than M-150. Same as item no C-1 For band in 1:1.5:3 (1 cement : 1.5 Coarse sand :3 Grit) | BI01010001010000000000000515BI0100001115 | 2.64 | CUM |
| 4 | 4 | As in item C-1 but upto plinth Level for the Footing (Using 1:1.5:3 Mix concrete) | BI01010001010000000000000515BI0100001116 | 4.15 | CUM |
| 5 | 5 | As in item C-1 but Above plinth Level for the Column (Using 1:1.5:3 Mix concrete) | BI01010001010000000000000515BI0100001117 | 1.43 | CUM |
| 6 | 6 | Same as item no C-1 For lighter beams in 1:1.5:3 (1 cement : 1.5 Coarse sand :3 Grit) | BI01010001010000000000000515BI0100001118 | 3.07 | CUM |
| 7 | 7 | Same as item no C-1 For slabs in 1:1.5:3 (1 cement : 1.5 Coarse sand :3 Grit) | BI01010001010000000000000515BI0100001119 | 5.1 | CUM |
| 8 | 8 | P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. | BI01010001010000000000000515BI0100001120 | 19.51 | QTL. |
| 9 | 9 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. | BI01010001010000000000000515BI0100001121 | 115.2 | KG |
| 10 | 10 | Class-150 brick work in 1:4 cement and coarse sand of 1.25 fineness modulus mortar in foundation and plinth including supply of all materials, labour and tools and plantsetc, required for proper completion of the work. | BI01010001010000000000000515BI0100001122 | 11.07 | CUM |
| 11 | 11 | Same as above but in super-structure above plinth level up to floor two level ( up to two storeys ) including necessary cutting and moulding of brick work as required and also including honey combed brick work for wall of one brick thick.Add for extra labour. | BI01010001010000000000000515BI0100001123 | 14.46 | CUM |
| 12 | 12 | Same as above but 1:3 (1 cement: 3 coarse sand) for wall of half brick (4.5\") thick. Add for extra labour. | BI01010001010000000000000515BI0100001124 | 2.66 | CUM |
| 13 | 13 | Providing and laying damp-proof course 2.5 cm thick with cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 13 mm nominal size). | BI01010001010000000000000515BI0100001125 | 3.17 | SQM |
| 14 | 14 | Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 0.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. | BI01010001010000000000000515BI0100001126 | 8.17 | SQM |
| 15 | 15 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Second class Teak wood | BI01010001010000000000000515BI0100001127 | 0.2 | CUM |
| 16 | 16 | Providing and fixing panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Second class teak wood - 35 mm thick shutters. | BI01010001010000000000000515BI0100001128 | 3.78 | SQM |
| 17 | 17 | Providing & fixing glass panes with putty and glazing clips in steel / Wooden doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes | BI01010001010000000000000515BI0100001129 | 3.84 | SQM |
| 18 | 18 | Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) | BI01010001010000000000000515BI0100001130 | 8 | NOS |
| 19 | 19 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete 250x10 mm | BI01010001010000000000000515BI0100001131 | 8 | NOS |
| 20 | 20 | Providing and fixing bright finished brass door latch with necessary screws etc. complete 300x16x5 mm | BI01010001010000000000000515BI0100001132 | 16 | NOS |
| 21 | 21 | Providing and fixing bright finished brass handles with screws etc. complete : 125 mm | BI01010001010000000000000515BI0100001133 | 16 | NOS |
| 22 | 22 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. | BI01010001010000000000000515BI0100001134 | 8 | NOS |
| 23 | 23 | 12 mm cement plaster of mix :1:3 (1 cement: 3 coarse sand) | BI01010001010000000000000515BI0100001135 | 255.12 | SQM |
| 24 | 24 | 12 mm cement plaster of mix :1:3 (1 cement: 3 coarse sand) all items of plaster if done in ceiling | BI01010001010000000000000515BI0100001136 | 42.49 | SQM |
| 25 | 25 | Add for plaster Making grooves in Inner plastered surface. | BI01010001010000000000000515BI0100001137 | 62.49 | RM |
| 26 | 26 | Add for plaster drip course in moulding to R.C.C. projections. | BI01010001010000000000000515BI0100001138 | 31.52 | RM |
| 27 | 27 | Applying Water proofing compound ('Impermo' of Snowcem India Ltd. ) in plaster work . | BI01010001010000000000000515BI0100001139 | 29.76 | KG |
| 28 | 28 | Cement concrete flooring 1:2:4(1 cement:2 coarse:sand:4 graded stone agregate) laid in one layer finished with floating coat of neat cement. 50 mm thick with 25 mm nominal size stone aggregate | BI01010001010000000000000515BI0100001140 | 27.3 | SQM |
| 29 | 29 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete. | BI01010001010000000000000515BI0100001141 | 33.8 | SQM |
| 30 | 30 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3\ncoarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | BI01010001010000000000000515BI0100001142 | 143.86 | SQM |
| 31 | 31 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/\n10 sqm of approved brand and manufacture | BI01010001010000000000000515BI0100001143 | 11.52 | SQM |
| 32 | 32 | French spirit polishing : Two or more coats on new works including a coat of wood filler | BI01010001010000000000000515BI0100001144 | 16.34 | SQM |
| 33 | 33 | Melamine polishing on wood work (one or more coat). | BI01010001010000000000000515BI0100001145 | 16.34 | SQM |
| 34 | 34 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work | BI01010001010000000000000515BI0100001146 | 297.61 | SQM |
| 35 | 35 | Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm | BI01010001010000000000000515BI0100001147 | 92.22 | SQM |
| 36 | 36 | Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer in-charge. Extruded section profile size 48x40 mm | BI01010001010000000000000515BI0100001148 | 29.7 | Rm |
| 37 | 37 | 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter). (DSR 9.118.1) | BI01010001010000000000000515BI0100001149 | 9.45 | SQM |
| 38 | 38 | E/W in excavation First lift (Sno: 251) | BI01010001010000000000000515BI0100001150 | 30 | CUM |
| 39 | 39 | Second Lift (PWD Sl No: 251+254) | BI01010001010000000000000515BI0100001151 | 25 | CUM |
| 40 | 40 | PCC 1:4:8 With 40mm gauge brick ballast | BI01010001010000000000000515BI0100001152 | 2 | CUM |
| 41 | 41 | First class Brick work 1:3 in cement and coarse sand mortar\nSl No: 307 | BI01010001010000000000000515BI0100001153 | 20 | CUM |
| 42 | 42 | RCC in beam 1:2:4 (light) excluding cost of reinforcement | BI01010001010000000000000515BI0100001154 | 0.03 | CUM |
| 43 | 43 | RCC in beam 1:2:4 slab excluding cost of reinforcement | BI01010001010000000000000515BI0100001155 | 3.09 | CUM |
| 44 | 44 | MS tor reinforcement in RCC work Sl no: 504 | BI01010001010000000000000515BI0100001156 | 243 | KG |
| 45 | 45 | 12mm thick plaster in 1:3 with coarse sand | BI01010001010000000000000515BI0100001157 | 71 | SQM |
| 46 | 46 | 25mm thick CC 1:2:4 Sl no: 601 | BI01010001010000000000000515BI0100001158 | 20 | SQM |
| 47 | 47 | P/F CI step (2x4) | BI01010001010000000000000515BI0100001159 | 16 | KG |
| 48 | 48 | P/F of 100 mm dia HCI pipe | BI01010001010000000000000515BI0100001160 | 4 | Rm |
| 49 | 49 | S/F of CI Manhole cover (600 x600) | BI01010001010000000000000515BI0100001161 | 2 | No |
| 50 | 50 | 100 dia HCI Ventilating shaft | BI01010001010000000000000515BI0100001162 | 2 | No |
| 51 | 51 | HCI 100 mm dia Bend /tee | BI01010001010000000000000515BI0100001163 | 2 | No |
| 52 | 52 | PCC 1:2:4 | BI01010001010000000000000515BI0100001164 | 0.33 | CUM |
| 53 | 53 | S/F of HCI cowl | BI01010001010000000000000515BI0100001165 | 1 | No |
| 54 | 54 | Installation of 1.5 Hp submirsible pump including boring\nof tubewell upto 60 mtrs and well development for\nminimum 48 Hrs as per attached analysis and provision\nof 2 Nos 500 Ltrs water storage tank with complete | BI01010001010000000000000515BI0100001166 | 1 | Job |
| 55 | 55 | E/W in filling from 5Km+1Km kacha marg cartage | BI01010001010000000000000515BI0100001167 | 10 | CUM |
| 56 | 56 | P/L granular sub base including consolidating watering and ramming complete. | BI01010001010000000000000515BI0100001168 | 3 | CUM |
| 57 | 57 | PCC in 1:2:4 in cement coarse sand as per PWD | BI01010001010000000000000515BI0100001169 | 1 | CUM |
| 58 | 58 | P/L 80mm thick rubber moulded interlocking pavers with\ncushion of local sand. | BI01010001010000000000000515BI0100001170 | 30 | SQM |
| 59 | 59 | MS sinage board as per approved drawing size ( 5'0\" x 2'6\") | BI01010001010000000000000515BI0100001171 | 2 | No |
| 60 | 60 | Wiring point for light with 1.0 sq.mm FR P.V.C. insulated multistrand single core Copper Conductor cable in heavy gauge rigid steel conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting complete with 14 S.W.G copper earth continuity wire & piano type switch etc. complete in all respects. | BI01010001010000000000000515BI0100001172 | 30 | NOS |
| 61 | 61 | Same as in item no. 1 but for fan. and light duty exhaust fan | BI01010001010000000000000515BI0100001173 | 2 | Nos |
| 62 | 62 | Same as in item no. 1 but for 5 amp plug point with piano type switch & socket etc. | BI01010001010000000000000515BI0100001174 | 2 | Nos |
| 63 | 63 | Add for light / fan points with modular type switches in place of piano type switches | BI01010001010000000000000515BI0100001175 | 32 | Nos |
| 64 | 64 | Add for plug point with modular switch & socket in place of piano type switch & socket | BI01010001010000000000000515BI0100001176 | 2 | Nos |
| 65 | 65 | Supply & fixing of power plug with 20 amp 250 volts flush type modular switch and 5 pin 20 amp 250 volts flush type universal modular socket on concealed MS box including supply of all material, labour T&P etc. required for proper completion of work | BI01010001010000000000000515BI0100001177 | 3 | Nos |
| 66 | 66 | Supply & wiring of sub main with FR P.V.C. insulated 1100 volts grade single core copper conductor cable in heavy gauge rigid steel coduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting complete with one no. 14 SWG copper earth continuity wire complete in all respects. 2 x 4 sq. mm. In 20 mm dia conduit. | BI01010001010000000000000515BI0100001178 | 50 | M |
| 67 | 67 | 2 x 10 sq. mm. In 25 mm dia conduit. | BI01010001010000000000000515BI0100001179 | 10 | M |
| 68 | 68 | S/F of surface / flush mounting SPN Distribution board (Legrand Lexic) without MCB complete in all respects as directed at site by Engineer-in-charge. | BI01010001010000000000000515BI0100001180 | 1 | Nos |
| 69 | 69 | Supply & fixing of 6/10/16/20/25/32 amp. SP MCB (10 KA) (Legrand Lexic) | BI01010001010000000000000515BI0100001181 | 10 | Nos |
| 70 | 70 | S/F of 40 Amp DP MCB (10 KA) (Legrand Lexic) | BI01010001010000000000000515BI0100001182 | 2 | Nos |
| 71 | 71 | S/F of sheet steel enclosure for DP / TP / FP MCB with neutral link and earth terminal. | BI01010001010000000000000515BI0100001183 | 1 | Nos |
| 72 | 72 | Supply & burrying of 600mm x 600mm x 6.0mm G.I. plate, vertically for earthing with its top at least 3 m below ground level complete 20mm dia. G.I.pipe and funnel for watering and one earthing lead of no. 8 SWG G.I. wire in 15 mm dia. GI pipe upto switch board (from apron to switch board the cost of GI pipe & GI wire will be extra) 300mm square C.I. box with hinged cover, masonary housing alternate layer of charcoal/coke and salt atleast 150mm thick alround etc. as per the direction of engineer in-charge complete in all respect . | BI01010001010000000000000515BI0100001184 | 1 | Nos |
| 73 | 73 | Supplying & Laying of one number 8 SWG G. I. wire in 15 mm. dia. G. I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T & P and other material required for proper completion of the work as directed at site. | BI01010001010000000000000515BI0100001185 | 28 | M. |
| 74 | 74 | Supply and laying of ISI marked aluminium conductor PVC / XLPE insulated armoured, served, sheathed cable 1100 volts grade at 750 mm below ground level over a cushion of 75 mm thick sand around & protected with brick on sides & top on surface the cable run shall be fixed on M.S. clamps etc. of suitable size complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 10 sqmm 2 core | BI01010001010000000000000515BI0100001186 | 50 | M |
| 75 | 75 | Supply fixing of plam or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connections etc. complete in all respects as per direction of Engineer-in-charge. 10 sq.mm. | BI01010001010000000000000515BI0100001187 | 7 | Nos |
| 76 | 76 | Supply and fixing brass nickle plated compression glands for PVC insulated armoured, served, sheathed cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth conductor. 10 sqmm 2 core | BI01010001010000000000000515BI0100001188 | 2 | Nos |
| 77 | 77 | Erection and testing of exhaust fan on the existing hole with suitable size of rag bolts nuts and washers etc complete in all respects. | BI01010001010000000000000515BI0100001189 | 2 | Nos |
| 78 | 78 | Supply and fixing of 16 gauge MS drum duly painted including making hole in the wall for exhaust fan and finishing properly complete in all respect.. | BI01010001010000000000000515BI0100001190 | 2 | Nos |
| 79 | 79 | Supply & fixing of recess/surface/ pendent mounting round10 to 15 watt LED Down lighter having powder coated die cast aluminium housing with heat silk, diffuser/ reflector and driver set complete in all respect. | BI01010001010000000000000515BI0100001191 | 7 | Nos |
| 80 | 80 | Supply & fixing of LED tube light with batten suitable for upto 1x22 watt LED tube light fittings including tube on surface complete in all respect Cat- AAA | BI01010001010000000000000515BI0100001192 | 5 | Nos |
| 81 | 81 | Supply & fixing of recess/ surface mounting round 24 watt to 32 wat tLED down lighter having powder coated die cast alumnium housing with extended heat sink, diffuser / Reflector and driver set completed in all respect. | BI01010001010000000000000515BI0100001193 | 5 | Nos |
| 82 | 82 | Supply, laying, jointing, testing and commissioning of ISI marked (IS : 14930, part 2) H.D.P.E. (DWC) Double wall Corrugated pipe for cable laying having corrugation on outer wall and plain smooth surface at inner side including transportation upto the site, jointing, providing and fixing all fittings i.e. sockets, couplers, reducers, end caps etc including excavation in all kind of soil upto 1 meter depth of suitable width with back filling of soil into trenches to complete the works in all respects. (Make : Duraline / Jain / AKG) 63 mm. ID / 78 mm OD | BI01010001010000000000000515BI0100001194 | 5 | M |
| 83 | 83 | Supply of AC 230/250 volts, 50 HZ fresh air fans including providing nuts, bolts, mounting frame and other accessories etc. complete 300 mm sweep | BI01010001010000000000000515BI0100001195 | 1 | No |
| 84 | 84 | Supply of AC 230/250 volts, 50 HZ exhaust fans including providing nuts, bolts, mounting frame and other accessories etc. complete (Make : Bajaj / Crompton / Havells) 300 mm sweep 900 rpm | BI01010001010000000000000515BI0100001196 | 2 | No |
| 85 | 85 | Providing & fixing white vitreous china pedastal type water closet (European type) with ISI marked white solid plastic seat and lid, 10 litre white vitreous china low level flushing cistren & C.P. flush bend with fittings and CI brackets, 40 mm flush bend, over flow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required. ( Make Jaquar / Toto/ Grohe) | BI01010001010000000000000515BI0100001197 | 3 | No |
| 86 | 86 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10 litre white vitreous china low level flushing cistren with fittings and CI/MS bracket 40mm C. P. flush bend, over flow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required. White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests ( Make Jaquar / Toto/ Grohe) | BI01010001010000000000000515BI0100001198 | 3 | No |
| 87 | 87 | Providing & fixing white viterous china wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fitting and brackets, cutting & making good the walls wherever required . ( Make Jaquar / Toto/ Grohe) Flat back Wash Basin size 550X400 mm with single 15mm C. P. brass pillar tap ( Make Jaquar / Toto/ Grohe) | BI01010001010000000000000515BI0100001199 | 5 | No |
| 88 | 88 | Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. 32 mm dia (for wash basin) | BI01010001010000000000000515BI0100001200 | 6 | No |
| 89 | 89 | Providing & Fixing 600 X 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | BI01010001010000000000000515BI0100001201 | 5 | No |
| 90 | 90 | Providing & fixing viterous china toilet paper holder. | BI01010001010000000000000515BI0100001202 | 3 | No |
| 91 | 91 | Providing, fixing chlorinated polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in charge. 40mm nominal outer dia pipes | BI01010001010000000000000515BI0100001203 | 20 | RM |
| 92 | 92 | 50mm nominal outer dia pipes | BI01010001010000000000000515BI0100001204 | 15 | RM |
| 93 | 93 | Providing, fixing chlorinated polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in charge.15mm nominal outer dia pipes | BI01010001010000000000000515BI0100001205 | 40 | RM |
| 94 | 94 | 20mm nominal outer dia pipes | BI01010001010000000000000515BI0100001206 | 15 | RM |
| 95 | 95 | 25mm nominal outer dia pipes | BI01010001010000000000000515BI0100001207 | 10 | RM |
| 96 | 96 | 32mm nominal outer dia pipes | BI01010001010000000000000515BI0100001208 | 8 | RM |
| 97 | 97 | Providing & fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 40 mm nominal bore | BI01010001010000000000000515BI0100001209 | 2 | No |
| 98 | 98 | 50 mm nominal bore | BI01010001010000000000000515BI0100001210 | 2 | No |
| 99 | 99 | Providing & fixing 15 mm nominal bore 45 cm long unplasticised PVC connection pipe with brass unions. | BI01010001010000000000000515BI0100001211 | 15 | No |
| 100 | 100 | Providing & fixing 15 mm nominal bore CP brass bib cock of approved quality conforming to IS 8931. ( Make Jaquar / Toto/ Grohe) | BI01010001010000000000000515BI0100001212 | 5 | No |
| 101 | 101 | Providing and fixing 15 mm nominal bore C.P brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. ( Make Jaquar / Toto/ Grohe) | BI01010001010000000000000515BI0100001213 | 7 | No |
| 102 | 102 | Providing & fixing 15 mm nominal bore C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS : 8931. ( Make Jaquar / Toto/ Grohe) | BI01010001010000000000000515BI0100001214 | 2 | No |
| 103 | 103 | Providing & fixing 15 mm nominal bore C.P brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931. ( Make Jaquar / Toto/ Grohe) | BI01010001010000000000000515BI0100001215 | 15 | No |
| 104 | 104 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern | BI01010001010000000000000515BI0100001216 | 1 | No |
| 105 | 105 | Constructing brick masonry chamber 300 x 300 x 500 mm, inside with F.P.S. brick work in cement mortar 1: 4 (1 cement : 4 coarse sand) for Stop Cock, with C. I. surface box 100 x 100 x 75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4mix (1cement : 2 coarse sand:4 grade stone aggregate 20mm nominal size); necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand: 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1 : 3 (1 cement : 3 coarse sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design | BI01010001010000000000000515BI0100001217 | 2 | No |
| 106 | 106 | Providing and fixing square mouth S. W. Gully trap grade `A' complete with C.I. grating brick masonry chamber with F.P.S bricks and water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design 180 x 150 mm. size P type | BI01010001010000000000000515BI0100001218 | 3 | No |
| 107 | 107 | Providing and fixing PTMT Bottle Trap for Wash basin and sink.\n Bottle trap 31mm single piece moulded with height of\n270 mm, effective length of tail pipe 260 mm from the\ncentre of the waste coupling, 77 mm breadth with 25 mm\nminimum water seal, weighing not less than 260 gms | BI01010001010000000000000515BI0100001219 | 5 | Set |
| 108 | 108 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. | BI01010001010000000000000515BI0100001220 | 3 | No |
| 109 | 109 | Providing & fixing of white vitreous china urinal partition for half stall urinals. (Jaquar or equivalent) | BI01010001010000000000000515BI0100001221 | 2 | No |
AI Tender Summary
Tender Timeline
Sep 14, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedSep 26, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 27, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender