Providing And Erecting Solar Pack System Primary Health Center At . Shideshvar Tq . Aundha Na Dist . Hingoli
Tender Value
14.87 Lakhs
Estimated cost
Bid Submission
20 Sep 2019
0 days left
EMD
15000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Aundha → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing And Erecting Solar Pack System Primary Health Center At . Shideshvar Tq . Aundha Na Dist . Hingoli
BOQ
| Name of Work : Providing & Erecting Solar Pack System Primary Health Center At.Shidheshvar Tq.Aundha Na Dist.Hingoli | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Supplying, installing, testing and commissioning of 9 kWp off grid solar power pack with GI mounting structure and interconnecting wires / cables along with 24V/12V pure sine wave solar power inverter (THD<5%), 24V/12V charge controller and 24V/12V C-10\nrated lead acid battery bank of required capacity and required SPV modules for battery backup of 6 hrs complete, with 5 years on site performance warrantee. Specification no. ESD-RT-OFG | BI01010001010000000000000515BI0100001113 | 1 | Each |
| 2 | 2 | Supplying, installing, testing and commissioning solar LED mini Hi\n– Mast 20 W x 5 nos. LED luminaries, 2 nos. x 150 AH 12 V lithium battery, min. 400 Wp SPV modules, mounted on GI octagonal pole with bottom of 130 mm A/F, top 70 mm A/F 6 mtr height along with brackets, foundation, earthling and necessary accessories, waterproof battery box, suitable solar inverter, timer setting arrangement, GI / powder coated module structure, with first 6 hr. full intensity light output and following 6 hr. with half intensity light output along with solar and local electrical power supply charging facility complete. ( with 5 years warrantee ) | BI01010001010000000000000515BI0100001114 | 1 | Each |
| 3 | 3 | Supplying & erecting mains with 2x6 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WGMA/BW | BI01010001010000000000000515BI0100001115 | 48 | Meter |
| 4 | 4 | Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted suitable for 3 pole MCCB as incomer & outgoing SP MCB (12 poles) or TP MCB of 4 ways (12 poles) on iron/ GI frame. (vertical busbar type) as per specification no. SW-SWR/MCBDB1 | BI01010001010000000000000515BI0100001116 | 1 | Each |
| 5 | 5 | Supplying, erecting & marking TPMCB 40A to 63A in provided distribution board as per specification no. SW-SWR/MCB | BI01010001010000000000000515BI0100001117 | 4 | Each |
| 6 | 6 | Providing & erecting 3 Pole MCCB upto 100A, 415V, with short circuit rating 25 kA (Ics=100% of Icu ),adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB | BI01010001010000000000000515BI0100001118 | 1 | Each |
| 7 | 7 | Supplying, installation & marking of surge arrestor / surge protection device at the main distribution board after the incoming\nbreaker of type 1+2 tested for Imax 100 kA for three phase and neutral as per specification no. CP-SPD | BI01010001010000000000000515BI0100001119 | 2 | Each |
| 8 | 8 | Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates,rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. | BI01010001010000000000000515BI0100001120 | 49 | kg |
| 9 | 9 | Providing & erecting Hot dipped galvanized perforated type\ncable tray manufactured from 16 swg (1.6 mm thick) GI sheet of\n150 mm width & 75 mm height compl | BI01010001010000000000000515BI0100001121 | 4 | Each |
| 10 | 10 | Providing & erecting Hot dipped galvanized cover suitable for\nperforated type cable tray manufactured from 18 swg (1.2 mm\nthick) GI sheet of 150 mm width & 20 mm height complete with\nnecessary hardware in approved manner. | BI01010001010000000000000515BI0100001122 | 1 | Meter |
| 11 | 11 | Providing earthing with galvanized iron earth plate size 60 x 60 x\n0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP | BI01010001010000000000000515BI0100001123 | 1 | Each |
| 12 | 12 | Providing earthing with copper earth plate size 60 x 60 x 0.315 cm\nwith funnel with a wire mesh for watering and brick masonry block\nC.l. cover with minimum 25 kg Carbon based environment friendly\nback fill Ground Enhancing compound complete with all materials,\ntesting & recording the results as per specification no ESE -LA | BI01010001010000000000000515BI0100001124 | 4 | Each |
| 13 | 13 | Supplying and erecting copper strip of required size used for\nearthing on wall and/or any other purpose with necessary copper\nclamps fixed on wall painted with bituminous paint in an approved\nmanner with joints required. As per specification no. EA-EP. | BI01010001010000000000000515BI0100001125 | 15 | Kg |
| 14 | 14 | Supplying & erecting conventional spike type air termination\nsuitable to carry lightning stroke made up of heavy gauge 40 mm dia\ncopper pipe of standard length with 5 Nos. copper spikes fixed on\ncopper ball as air terminals duly threaded in copper pipe erected on\nprovided foundation in an approved manner. | BI01010001010000000000000515BI0100001126 | 4 | Each |
| 15 | 15 | Providing and Back filling back filling ground enhancing compound 25 kg bag complete. | BI01010001010000000000000515BI0100001127 | 5 | Each |
| 16 | 16 | Supplying, erecting & terminating XLPE armoured cable 4 core 10\nsq. mm. aluminium conductor with continuous 5.48 sq. mm. (12\nSWG) G.I. earth wire complete erected with glands & lugs, on wall/\ntrusses/pole or laid in provided trench/ pipe as per specification no.\nCB-LT/AL | BI01010001010000000000000515BI0100001128 | 30 | Meter |
| 17 | 17 | Making trench of suitable width and depth in hard murum / tar\nroad for laying provided LT cable up to and including 16 sq. mm\ncomplete as per specification no. CW-EXN-CTR | BI01010001010000000000000515BI0100001129 | 27 | Meter |
| 18 | 18 | Supplying, erecting & terminating XPLE armoured cable 4 core 16\nsq. mm. aluminium conductor with continuous 5.48 sq. mm. (12\nSWG) G.I. earth wire complete erected with glands & lugs, on wall/\ntrusses/pole or laid in provided trench/ pipe as per specification no.\nCB-LT/AL | BI01010001010000000000000515BI0100001130 | 30 | Meter |
| 19 | 19 | Supplying, fixing and commissioning MCB type change over\nswitch 2 pole, 63 A with 3 positions (I-O-II) with centre off position\nas per specification no. SW-SWR/MCBCOS | BI01010001010000000000000515BI0100001131 | 1 | Each |
| 20 | 20 | Making cement concrete foundation in 1:3:6 cement concrete,\n(20 to 25) mm. stone metal duly plastered with necessary curing for\ncomplete. (pole muffing or any other purpose). | BI01010001010000000000000515BI0100001132 | 10 | Sq.m |
| 21 | 26 | Add 12% GST | BI01010001010000000000000515BI0100001138 | 1 | No |
AI Tender Summary
Tender Timeline
Sep 14, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedSep 20, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 21, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender