Providing Internal Facilities At Village Rukadi Tal . Hatkangle , Dist . Kolhapur 2019-20
Tender Value
9.99 Lakhs
Estimated cost
Bid Submission
18 Sep 2019
0 days left
EMD
10000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gram Panchayat Rukadi Tal Hatkanangale → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing Internal Facilities At Village Rukadi Tal . Hatkangle , Dist . Kolhapur 2019-20
BOQ
| Name of Work : Providing internal facilities at Village Rukadi, Tal.Hatkanagale, Dist.Kolhapur | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting for all leads and lifts excetra complete.\nItem / Page No : 2 / 197\nSpecification No : Bd.A.1\nSpec. Page No : 259\n | BI01010001010000000000000515BI0100001112 | 29.73 | Cubic Metre |
| 2 | 2 | Providing and laying Cast in situ/Ready Mix, cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailling out water, formwork,laying/pumping, compacting and curing excetra complete, with fully automatic micro processor based Programmable Logic Control with Supervisory Control and Data Acquisition enabled reversible Drum Type mixer. - With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)\nItem / Page No : 1 / 226\nSpecification No : Bd.E.1\nSpec. Page No : 287 - 288\nAdditional Specifications : With additional specifications for controlled concrete. | BI01010001010000000000000515BI0100001113 | 7.29 | Cubic Metre |
| 3 | 3 | Providing and laying in situ/Ready Mix cement concrete M-20 of trap metal for reinforced cement concrete work in foundations like raft, strip foundations, grillage and footings of reinforced cement concrete columns and steel stanchions, excetra including bailling out water, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel), excetra complete, with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)\nItem / Page No : 11 / 230\nSpecification No : Bd.F.3, B-7\nSpec. Page No : 298, 38-40\nAdditional Specifications : With additional specification for controlled concrete. | BI01010001010000000000000515BI0100001114 | 1.44 | Cubic Metre |
| 4 | 4 | Providing and fixing in position thermo mechnically treated FE-500 bar reinforcements of various dias for reinforced cement concrete pile caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardis, copings, fins, arches, excetra as per detailed designs, drawings and schedules including cutting, bendding, hooking the bars, binding with wires or tack welding and supporting as requied complete.\nItem / Page No : 33 / 245\nSpecification No : Bd.F.17\nSpec. Page No : 306\n | BI01010001010000000000000515BI0100001115 | 0.076 | Metric Ton |
| 5 | 5 | Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed desings and drawing or as directed incluing cutting, fabricating, hoisting, erecting, fixing in position, making rivetted / bolted / welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade, excetra complete.\nItem / Page No : 2 / 223\nSpecification No : BD.C.3\nSpec. Page No : 275\n | BI01010001010000000000000515BI0100001116 | 1.477 | Metric Ton |
| 6 | 6 | Providing and fixing of colour coated zincalume (R) AZ 150 (Minimum 150 grams per square metre total on each sides) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 milimetre base metal thickness (BMT) (0.5 milimetre TCT), Hi-strength steel with minium 550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium, 43.4% zinc, 1.6% silicon) with COLORBOND (R) steel quality super durable polyster paint coat (with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nominal 950-1050 milimetre effective cover width and nominal 25-30 milimetre deep ribs with subtle square fluting in the five pan at nominal 180-250 milimetre center to centre. The end rib shall be designed for anti capilary groove and return leg. The feed material should have coil manufacturer's product details marked at regular interval. Including fasteners with minium fatened with minium 25 um zinc-tin alloy coated, hex head, self-drilling screw, excetra complete. (Weight of profile 4.52 kilogram per square metre). - 601 milimetre to 900 milimetre girth (surface width)\nItem / Page No : 36 / 304\nAdditional Specifications : The work shall be done as per instructions of Engineer in charge. | BI01010001010000000000000515BI0100001117 | 140 | Running Metre |
| 7 | 7 | Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50 metre and spreading for embankment or stacking as directed.\nItem / Page No : 11 / 27\nSpecification No : MORTH-301\nSpec. Page No : 45-53\n | BI01010001010000000000000515BI0100001118 | 40.8 | Cubic Metre |
| 8 | 8 | Supplying hard murum / kankar at the road site, including conveying and stacking, excetra complete.\nItem / Page No : 29a / 29\nSpecification No : MORTH-408\nSpec. Page No : 139-142\n | BI01010001010000000000000515BI0100001119 | 61.2 | Cubic Metre |
| 9 | 9 | Spreading hard murum / soft murrum / gravel or kankar for side width, excetra complete.\nItem / Page No : 30 / 29\nSpecification No : MORTH-408\nSpec. Page No : 139-142\n | BI01010001010000000000000515BI0100001120 | 61.2 | Cubic Metre |
| 10 | 10 | Compacting the hard murum / kankar (upto 200 milimetre loose) with power roller including artificial watering complete.\nItem / Page No : 26aiii / 130\nSpecification No : RD.38\nSpec. Page No : 210\n | BI01010001010000000000000515BI0100001121 | 204 | Square Metre |
| 11 | 11 | Providing and fixing 300 mm NP-3 concrete pipe\nNon-Dsr Item\nAdditional Specifications : The work shall be carried out as per the instructions of Engineer in-charge. | BI01010001010000000000000515BI0100001122 | 5 | Running Metre |
| 12 | 12 | Royalty charges for various building construction bonafied materials which are used for government bonafied works and for which Royalty charges are to be paid by the contractor.\nItem / Page No : 3 / 0\n | BI01010001010000000000000515BI0100001123 | 139.28 | Cubic Metre |
| 13 | 13 | Contribution towards District Mineral Foundation at the rate of 10 percent of prevailing rate of Royalty for various building construction bonafied materials which are used for government bonafied works and for which Royalty is to be paid by the contractor.\nItem / Page No : 10 / 0\n | BI01010001010000000000000515BI0100001124 | 139.28 | Cubic Metre |
| 14 | 14 | Laboratory testing charges for various materials required for items of work, on the basis of testing frequency and charges fixed by Vigilence and Quality Control Circle, Pune.\nItem / Page No : 4 / 0\n | BI01010001010000000000000515BI0100001125 | 1 | Job |
| 15 | 15 | Providing and fixing Road junction / Information sign board of size 0.90 metre X 0.60 m. prepared on 16 gauge mild steel sheet with angle iron frame of size 35x35x5 milimetre including painting with one coat of zinc cromate stoving primer and two coats each of green/ white back ground and back side gray stove enamelled, bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows, coated with non pealable crystal clear protective coat retaining 100% reflection including two angle iron post of size 50x50x5 milimetre of 3.65 m. long inflated at bottom drilled on top and painted in white and black bands of 30 centimetre. with 4 numbers high strength galvanised iron bolts and nuts of size 10 milimetre diameter and 20 milimetre long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 centimetre X 60 centimetre X 75 centimetre size as directed by Engineer-in-charge excetra complete. Mild Steel Board with Engineering Grade.\nItem / Page No : 47 / 79\nSpecification No : MoRTH-801\nSpec. Page No : ---\nAdditional Specifications : The work shall be carried out as per instructions of Engineer in charge. | BI01010001010000000000000515BI0100001126 | 1 | Number |
| 16 | 16 | Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundations and plinth of inner walls / in plinth of external walls including bailling out water, striking joints on unexposed faces and watering, excetra complete.\nItem / Page No : 1 / 257\nSpecification No : Bd.H.1\nSpec. Page No : 329\n | BI01010001010000000000000515BI0100001127 | 37.8 | Cubic Metre |
| 17 | 17 | Providing and laying masonry of Indian Standard cement concrete hallow block 200 milimetre X 200 milimetre X 400 milimetre with 200 milimetre thick in cement mortar 1:6 proportion for superstructure including curing, scaffolding, excetra complete.\nItem / Page No : 2 / 259\nSpecification No : Bd.I.1\nSpec. Page No : 349\n | BI01010001010000000000000515BI0100001128 | 168 | Square Metre |
| 18 | 18 | Providing flush grooved pointing with cement mortar 1:3 for stone masonry work including scaffolding and curing, excetra complete.\nItem / Page No : 17 / 269\nSpecification No : Bd.L.15\nSpec. Page No : 372\n | BI01010001010000000000000515BI0100001129 | 84 | Square Metre |
| 19 | 19 | Providing flush grooved pointing with cement mortar 1:3 for brick work including scaffolding and curing, excetra complete.\nItem / Page No : 16 / 269\nSpecification No : Bd.L.15\nSpec. Page No : 372\n | BI01010001010000000000000515BI0100001130 | 336 | Square Metre |
| 20 | 20 | Providing and laying Cast in situ / Ready Mix cement concrete M-15 of trap / granite / quartzite / gneiss metal for bed blocks, foundation blocks and such other items including bailling out water, plywood / steel formwork, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing, excetra complete. The cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin, excetra (Wooden centering will not be allowed.) with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)\nItem / Page No : 8 / 227\nSpecification No : Bd.E.4, B-7\nSpec. Page No : 289 - 290, 38-40\n | BI01010001010000000000000515BI0100001131 | 9.1 | Cubic Metre |
| 21 | 21 | Add insurance towards labour at 1.00%\n | BI01010001010000000000000515BI0100001132 | 1 | Job |
| 22 | 22 | Add G.S.T. on residencial Buildings at 12.00%\n | BI01010001010000000000000515BI0100001133 | 1 | Job |
AI Tender Summary
Tender Timeline
Sep 13, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 20, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender