Tender For Maintenance And Repairing Of Wtp At Head Works Sahawa Under Sub Div Lalaniya ( S . No 03 )
Tender Value
6.30 Lakhs
Estimated cost
Bid Submission
24 Sep 2019
0 days left
EMD
12600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Taranagar → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
tender for Maintenance And Repairing of Wtp At Head Works Sahawa Under Sub Div Lalaniya ( S . No 03 )
BOQ
| Name of Work: Maintenance and Repairingof WTP at head works Sahawa Under Sub Div Lalaniya | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Supply charging of filter media(gravel and samd)as per specification of department & shall confirm to IS 8419(Part-1) 1977 (ammended up to date) only including Screening & washing with 5% HCL solution make the filter media fresh from all impurities adnd free from silt and clay (gravel and coarse sand ) and to make fine sand free from all impurities and silt contains not more the 5% size detailed here below (work to be executed as per scope of work decided by department at time of tendering ) fine sand with silt contents not more than 5(samd free from all impurities 100 cm thick (.2 to .3mm) | 320 | Cum | |
| 2 | 2 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in : | |||
| 3 | 2.01 | Cement mortar 1:6 (1 cement : 6 coarse sand) | 6.5 | Cum | |
| 4 | 3 | Plaster on new surface on walls in cement sand mortar 1:4 including raking of joints etc. complete fine finish: | |||
| 5 | 3.01 | 12 mm thick. | 75 | Sqm | |
| 6 | 4 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and prepairingand plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead : With cement mortar 1 :4 ( 1 cement : 4 Fine sand) | 250 | Sqm | |
| 7 | 5 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding: | |||
| 8 | 5.01 | Old work (one or more coats) including scrapping surface and necessary repairs. | |||
| 9 | 5.02 | Colour change | 320 | Sqm | |
| 10 | 6 | Finishing wall with water proofing cament paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding old work(one or more coats) | 350 | Sqm | |
| 11 | 7 | Patch repair to cement concrete floor including digging out old floor in regular shape and removal of rubbish curing etc. complete in all respects. | 45 | Sqm | |
| 12 | 8 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : | |||
| 13 | 8.01 | Columns, pillars, posts and struts etc. | 65 | Sqm | |
| 14 | 9 | Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. M20 grade Nominal Mix / Design Mix | 5.5 | Cum | |
| 15 | 10 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor Five level. | |||
| 16 | 10.01 | Cold twisted deformed bars (IS : 1786). | 150 | kg | |
| 17 | 11 | Demolishing of R.C.C. work including stacking of steel bars and disposal of unserviceab le material within 50 meters lead. | 11.25 | Cum | |
| 18 | 12 | Renewing glass panes, with puty and nails wherever necessary: | |||
| 19 | 12.01 | 5.5 mm thick plain glass panes. | 7.4 | Sqm | |
| 20 | 13 | Providing and fixing of flanged/plain ended MS specials maid from MS sheet strips of relevant IS specification of approved thickness by welding/lowering ,laying alligning,fixing and position at all level/depths in tranches complet including all taxes,material,labour inside lining out side coating testing and commissioning along with p/l as per technical specification and direction of engineer incharge | |||
| 21 | 13.01 | MS pipe specials upto 600 mm Dia (withminimum 5 mm thickness sheet) | 420 | per KG |
AI Tender Summary
Tender Timeline
Sep 13, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedSep 24, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 25, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender