Constructing Two Room School Building At Shenavade Tal-Sangameshwar Dist-Ratnagiri ( For Un Employed Engineers Only )
Tender Value
14.07 Lakhs
Estimated cost
Bid Submission
18 Sep 2019
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sangameshwar → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Constructing Two Room School Building At Shenavade Tal-Sangameshwar Dist-Ratnagiri ( For Un Employed Engineers Only )
BOQ
| Name of Work: Constructing Two Room School Building at Shenavade Tal.Sangameshwar | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1.01 | Item No. 1 :- Excavation for foundation in hard murum including removing the excavated materials upto a distance of 50 metres beyond the building area & lift as specified, stacking & spreading as directed including dewatering unless provided elsewhere, preparing the bed for the foundation & necessary backfilling, ramming, watering complete including shoring & strutting. | BI01010001010000000000000515BI0100001113 | 36.46 | Cmt |
| 2 | 1.02 | Item No.2. Excavation for foundation in hard rock by chiselling wedging line drilling etc. including trimming and levelling the bed removing the excavated materials upto a dist. Of 50mt. Beyond building area stacking as directed dewatering and back filling with available earth/mrum watering ramming etc. comp | BI01010001010000000000000515BI0100001114 | 1.92 | Cmt |
| 3 | 1.03 | Item No.3:-Providing and laying Cast in situ/Ready Mix cement concrete inM-10 of trap/ granite/ quartzite/ gneiss metal for foundation andbedding including bailing out water, formwork, laying/pumping,compacting, roughening them if special finish is to be provided,finishing if required and curing complete, with fully automaticmicro processor based PLC with SCADA enabled reversibleDrum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand R.A.1 | BI01010001010000000000000515BI0100001116 | 15.85 | Cmt |
| 4 | 1.04 | Item No.4 :-Providing and laying in situ/Ready Mix cement concrete M-25of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial SandR.A.2 | BI01010001010000000000000515BI0100001117 | 3.24 | Cmt |
| 5 | 2 | Item No.5 :- Providing and laying Cast in situ/Ready Mix cement concrete M- 25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand R.A. No.3 | BI01010001010000000000000515BI0100001118 | 5.61488 | Cmt |
| 6 | 3 | Item No.6 :- Providing and laying Cast in situ/Ready Mix cement concrete M- 25 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand R.A. No.4 | BI01010001010000000000000515BI0100001119 | 10.0521 | Cmt |
| 7 | 4 | Item No.7 :- Providing and laying Cast in situ/Ready Mix cement concrete M- 25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compactionfinishing the formed surfaces with cement mortar\n1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) R.A. No.5 | BI01010001010000000000000515BI0100001120 | 14.3162 | Cmt |
| 8 | 5 | Item No.8 :- Providing and laying Cast in situ/Ready Mix cement concrete M- 25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja asper detailed design and drawings including centering,formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with\nSCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand R.A. No.6 | BI01010001010000000000000515BI0100001121 | 0.243 | Cmt |
| 9 | 6 | Item No.9:-Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. | BI01010001010000000000000515BI0100001122 | 2.83001 | M.T. |
| 10 | 7 | Item No.10 :- Providing laterite stone masonry in C. M. 1:6 in foundation & plinth including striking joints on the unexposed faces & watering complete. | BI01010001010000000000000515BI0100001123 | 8.57688 | Cmt |
| 11 | 8 | Item No.11. Filling and floors with approved excavated materials in 15 to 20cm layers including watering and compacting etc. comp | BI01010001010000000000000515BI0100001124 | 35.14 | Cmt |
| 12 | 9 | Item No.12. Providing soling using 80mm size trap metal in 15 cm layers including filling voids with crushed sand/grit ramming watering etc. comp | BI01010001010000000000000515BI0100001125 | 13.176 | Cmt |
| 13 | 10 | Item No. 13 :- Providing laterite stone masonry in cement mortar 1:6 in superstructure including racking out joints where plastering is to be done watering & scaffolding complete. | BI01010001010000000000000515BI0100001126 | 28.3955 | Cmt |
| 14 | 11 | Item No.14:-Providing and fixing frame with / without ventilator of size asspecified with Country non teak wood for doors and indowsincluding chamfering, rounding, rebating, iron holdfast of size300mm x 40mm x 5mm with oil painting, etc. complete. | 0.081 | Cmt | |
| 15 | 12 | Item No.15:-Providing sills of polished Kota stone 25 mm to 30mm thick, on a bed of 1:4 cement mortar including cement float, filling joints with slurry, curing polishing and cleaning etc. complete. | 4.05 | Smt | |
| 16 | 13 | Item No.16:-Providing and fixing Country cut teak wood double or singleleaf panelled shutters, 35 mm thick style top and freze rail 95 x35 thick with lock and bottam rail 195 x 25 mm thick and panels without ventilator as per detailed drawing excluding the door frame, stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats complete | 4.2525 | Smt | |
| 17 | 14 | Item No.17:-Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings\nsuch as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box | 10.8 | Smt | |
| 18 | 15 | Item No. 18 :- Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. | 87.84 | Smt | |
| 19 | 16 | Item No.19:-Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. | 155.43 | Smt | |
| 20 | 17 | Item No.20:-Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. | 162.75 | Smt | |
| 21 | 18 | Item No.21:-Providing and laying vetrified mirror/ glossy finish tiles having size 590mm to 605mmx590mm to 605mm.of 8 to 10mm. Thickness and confirming to IS 15622-2006 (group Bia) of approved make shade and pattern for flooring in required position laid on a bed of 1.4 cement mortar including neat cement float filling joints curing and clearing etc. Flooring | 87.84 | Smt | |
| 22 | 19 | Item No.22:-Providing and laying vetrified mirror/ glossy finish tiles having size 590mm to 605mmx590mm to 605mm.of 8 to 10mm. Thickness and confirming to IS 15622-2006 (group Bia) of approved make shade and pattern for flooring in required position laid on a bed of 1.4 cement mortar including neat cement float filling joints curing and clearing etc. Skirting | 2.66 | Smt | |
| 23 | 20 | Item No.23:-Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. | 10.8 | Smt | |
| 24 | 21 | Item No.24:-Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. | 162.75 | Smt | |
| 25 | 22 | Item No.25:-Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete. | 243.27 | Smt | |
| 26 | 23 | Item No.26:-Providing and fixing Name board etc.complete | 1 | No | |
| 27 | 24 | Item No. 27 :- Providing and laying chequered tiles of approved quality of size 30 cm x 30 cm, confirming to corresponding I.S. for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. | 47.36 | Smt | |
| 28 | 25 | Item No.28 Test report charges A) Cement - Standred Consistancy Finencess Specific Gravity Settig tine (Initial & Final) Compressive Strength Soundness | 1 | No | |
| 29 | 26 | B) Sand - Silt Factor | 1 | No | |
| 30 | 27 | C) Stone - Crushing Value /Compressive Strength water Absorption & Specific Gravity | 1 | No | |
| 31 | 28 | D) Concrete test - Cub M-20 Compressive Strength | 4 | No | |
| 32 | 29 | It.No.29. Royalty Charges | 13.18 | Cmt | |
| 33 | 30 | G.S.T. | 1 | No |
AI Tender Summary
Tender Timeline
Sep 12, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 19, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender