Restoration/Improvement Of Road From Nilothi Minor Towards Nangloi-Najafgarh Road In Village Nilothi In Distt . West . ( Including Maintenance For Six Years )
Tender Value
2.39 Crore
Estimated cost
Bid Submission
23 Sep 2019
0 days left
EMD
4.79 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nilothi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Restoration/Improvement Of Road From Nilothi Minor Towards Nangloi-Najafgarh Road In Village Nilothi In Distt . West . ( Including Maintenance For Six Years )
BOQ
| Name of Work : DVDB Works in NCT of Delhi.Sub Work:- Restoration/Improvement of road from Nilothi Minor towards Nangloi-Najafgarh road in Village Nilothi in Distt. West. (Including Maintenance for Six Years) | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | 28 | Cubic Metre | |
| 2 | 2 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar | 73 | Cubic Metre | |
| 3 | 3 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | 748 | Cubic Metre | |
| 4 | 4 | Excavation of silt, by mechanical means (Hydraulilc excavortor) / manual means including malba, earth, debries, rubbish etc. from the bed of drain and disposal of excavated material with all leads and lift by mechanical transport at his own source. | 836 | Cubic Metre | |
| 5 | 5 | Excavation of dumped stone or malba consisting of building rubbish, polythene bags and similar unserviceble dismantled or waste, material and disposal of the same by mechnical means, including loading transporting unloading at own source of the contractor or as approved by Engineer-in-charge for all leads including all lifts involved. | 973 | Cubic Metre | |
| 6 | 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) | 100 | Cubic Metre | |
| 7 | 7 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) | 332 | Cubic Metre | |
| 8 | 8 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor,etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | 33 | Cubic Metre | |
| 9 | 9 | 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand) | 1221 | Square Metre | |
| 10 | 10 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate | 665 | Square Metre | |
| 11 | 11 | Providing and fixing in cement mortar 1:6 (1 cement : 6 fine sand) red sand stone slabs 30mm thick over drains to act s a shuttering complete as per direction of Engineer in charge. | 84 | Square Metre | |
| 12 | 12 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) | 34 | Cubic Metre | |
| 13 | 13 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars | 3956 | Killograme | |
| 14 | 14 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, ransporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | 848 | Cubic Metre | |
| 15 | 15 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size). | 614 | Cubic Metre | |
| 16 | 16 | Raising of existing manhole up to 30 cm (Av) height by dismantling of C.C/RCC cover and frame including brick masonry with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand) plastering inside walls with cement mortar 1:4 (1 cement:4 coarse sand) with a floating coat of neat cement punning 12mm thick including cost of quantities to be executed in or under foul position complete as per direction of Engineer-in-charge. | 50 | each | |
| 17 | 17 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality EHD - 35 Circular shape 560 mm internal dia | 50 | Each | |
| 18 | 18 | Providing and laying cement concrete pavement of M-10 with ready mixed concrete from batching plant of reputed cement manufacturer and transported to site of work in transit mixer heaving continuous agitated mixer, manufactured as per mix design of M-10 grade of cement concrete work, including pumping of RMC from transit mixer to site. Placing in required camber compulsory with plate/screed vibrator, with wire brush etc. and curing including cost of admixtures in recommended proportions as per IS : 9103 to accelerate / retard setting of concrete, improve workability without impairing strength and durability as per specifications and direction of Engineer-in-charge. M-10 grade plain cement concrete by using 220 kg of cement per cum of concrete. | 1040 | Cubic Metre | |
| 19 | 19 | Providing and laying RMC of M-30 grade,by using minimum 400kg. of cement (43 grade OPC) per Cum of concrete in roads/streets manufactured in automatic RMC plant using coarse sand and graded stone aggregate of 20mm nominal size in appropriate proportion as per approved design criteria including transportation to site in transit mixer, including cost of admixture in recommended proportion as per IS9103 to accelerate/retard setting of concrete to improve workability without impairing strength and durability as per specification including spreading and compacting mechanically by using needle and surface vibrators, leveling to required slope & camber, finishing by floating & brooming with wire brushes etc. and curing including making provision for contraction/expansion, construction of cross/longitudinal joints of size 10mm wide 50mm deep by groove cutting machine providing and filling joints with approved joint filler and sealants, etc. complete, as per direction of Engineer-charge (Cost of joint filler & sealants shall be paid for separately under relevant items). | 1820 | Cubic Metre | |
| 20 | 20 | Providing and placing in position 100mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes,of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick, 100mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage ,all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge. | 325 | Square Metre |
AI Tender Summary
Tender Timeline
Sep 12, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedSep 23, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 23, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender