Retender For Construction Of Public Toilet In Ambedakar Park Ward No 09 Mc Hathin , Palwal .
Tender Value
5 Lakhs
Estimated cost
Bid Submission
17 Sep 2019
0 days left
EMD
10000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hathin → Haryana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Retender For Construction Of Public Toilet In Ambedakar Park Ward No 09 Mc Hathin , Palwal .
BOQ
| Name of Work:- Construction of Public Toilet in Ambedakar Park ward no 09 MC Hathin , Palwal. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Civil Work | BI01010001010000000000000515BI0100001112 | ||
| 2 | 1.01 | Earth work in excavation in foundations, trenches etc. in all kinds of soils not exceeding 2 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry, in 15 cms layers with compaction including disposal of all surplus soil , as directed with in a lead of 30 metres (HSR No. 6.6) | 25 | %Cum | |
| 3 | 1.02 | Earth filling under floors with surplus soil, excavated from foundation and taken only from outside the building plinth, in 15 cm layers includins ramming watering and consolidating lead up to 30 metres (HSR No. 6.13 (b) | 19.06 | %cum | |
| 4 | 1.03 | Cement concrete 1:5:10 With brick ballast 40mm nominal size in foundation and plinth (HSR No. 10.34 | 4.28 | Cum | |
| 5 | 1.04 | First Class brick work laid in cement, stone dust(from crusher) mortar 1:6 in foundation and plint (HSR No.11.22). | 13.57 | Cum | |
| 6 | 1.05 | Damp proof course 40mm thick of CC 1:2:4 using stone aggregate 20mm nominal size (HSR No. 10.114). | 7.73 | Sqm. | |
| 7 | 1.06 | 11.43cm thick brick wall laid in cement stone dust(from crusher) mortar 1:4 in superstructure (HSR No. 11.53). | 32.31 | Sqm. | |
| 8 | 1.07 | First class brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level (HSR No. 11.28). | 35.32 | Cum | |
| 9 | 1.08 | Cement concrete 1 : 1½ : 3 with stone aggregate 20 mm nominal size for reinforced concrete work in slabs with inclination not exceeding 25 degree with horizontal, excluding steel reinforcement, but including centring and shuttering, laid in position, complete in all respects (HSR No. 10.82+10.95). | 2.6 | Cum | |
| 10 | 1.09 | Cement concrete 1 : 1½ : 3 with stone aggregate 20 mm nominal size for reinforced concrete work for walls exceeding 20 cm thickness (straight and curved) beams,girders, stairs, columns, (square or rectangular) battens and lintels etc excluding steel reinforcement but including centring and shuttering, laid in position, complete in all respects (HSR No.10.86+10.95). | 3.87 | Cum | |
| 11 | 1.1 | Fe-415 EQR TMT steel bars for R.C.C works, where not included in the complete rate of R.C.C. including bending, binding and placing in position complete (HSR No. 18.22). | 4.26 | Qtl. | |
| 12 | 1.11 | Base course of floors consisting of 100mm thick cement concrete 1:8:16 and 100 mm sand or stone filling (HSR No. 14.1 | 49.98 | Sqm. | |
| 13 | 1.12 | Conglomerate Floor 50mm thick cement concrete topping 1:2:4 (HSR No. 14.9). | 16.32 | Sqm. | |
| 14 | 1.13 | Providing and fixing ceramic tiles / anti skid tiles of size 400 mm x 400mm or above size of approved make in floors, laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles. Note:- Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT & JOHNSONS (HSR No. 14.91) | 16.32 | Sqm. | |
| 15 | 1.14 | Providing and fixing first quality ceramiz glazed wall tiles conforming to IS 15622 (thicknedd to be specified by the manufacturer) of approved make in all colors, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Chanrge in skirting, risers of steps, dados over 12mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete (a) Size 200mm × 300mm (HSR No. 14.92). | 116.03 | Sqm. | |
| 16 | 1.15 | 12 mm Thick Cement Plaster (Inner walls) (HSR No. 15.7). | 116.45 | Sqm. | |
| 17 | 1.16 | 10mm thick cement plaster 1:4 (Ceiling) (HSR No. 15.52). | 19.35 | Sqm. | |
| 18 | 1.17 | 12mm thick cement plaster 1:4 (outer walls) (HSR No. 15.5). | 67.31 | Sqm. | |
| 19 | 1.18 | White Washing (iii) Three Coats (HSR No. 16.48) | 65.79 | Sqm. | |
| 20 | 1.19 | Precast Chequered Tiles of 20mm thickness in ordinary grey cement without chips laid on 20mm thick bed of cement coarse sand mortar 1:3 with neat cement slurry between joints and over the base in floors, treads of steps and landings (HSR No. 14.45). | 30.26 | Sqm. | |
| 21 | 1.2 | Terracing consisting of tiles 22.86 cm x 11.43 cm x 3.81cm laid over 87.50 mm mud filling on a layer of 25 mm mud plaster and an other layer of mud mortar for laying the tiles, including two coats of bitumen laid hot at 1.65 Kg. per sqm on top of RCC the slab including grouting with cement sand mortar 1:3 and top surface to be left clean etc (HSR No. 13.13). | 23.09 | Sqm. | |
| 22 | 1.21 | Prestressed Steel Sheets frames(Chowkhats) consisting if 2mm thick steel sheet of the specified section including iron lugs (hold fasts) iron hinges conforming to P.W.D. specifications including bolts for fixing stops locknotch provision for receving tower bolts and finished with one coat of ready mixed paints red lead non setting primer of approved quality fixed in position including cost of cement concrete 1:3:6 for filling in the frame end cement conrete 1:3:6 for lugs complete:- (b) door and window frame of size 76mm × 38mm with 35mm with single rebate (HSR No. 18.34). | 96.5 | Mtr. | |
| 23 | 1.22 | Factory manufactured solid flush door shutters, with block board core as per I.S.No. 1659-1969 bonded with water proof type phenol formaldehyde synthetic resin, hot pressed, conforming to I.S.2202 part I and II , fixed in position including iron hinges, screws, chocks/ cleats and stops, etc.(excluding the cost of any fittings other than specified above, but including labour for fixing the same in position) (a)commercial veneering with vertical grains or cross bands and face veneer on both sides commercial facing with laminated core and lipped edges (HSR No. 17.93 (a) (iii). | 22.54 | Sqm. | |
| 24 | 1.23 | Wrought iron and mild steel(using angles, flats, swuare bars, tee and channels) ladders grills, gratting frames, window guards, iron doors openable or fixed staircase or parapet or any other type of railing, gates and tree guards, etc. including cost of screws and welding rods or bolts and nuts complete fixed in position (HSR No. 18.12). | 0.82 | Qtl. | |
| 25 | 1.24 | Cost of iron fittings, complete for doors and windows, such as tower bolts, handles etc. and screws for there fittings(excluding siding bolts)- (a) single leaf shutter (HSR No. 17.71). | 26 | Sqm. | |
| 26 | 1.25 | Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead, inseed oil, varnish and chalk mitti including finishing the surface to required finish complete (HSR No. 16.01) | 54.864 | Sqm. | |
| 27 | 1.26 | Applying pink primer or aluminum priming coat on wood work including preparation of surface, knotting and stopping etc (HSR No. 16.02 ) | 45.72 | Sqm. | |
| 28 | 1.27 | Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or mettalic or plastered or concrete surface to give an even shade (HSR No. 16.02 ) | 45.72 | Sqm. | |
| 29 | 1.28 | Provind and Fixing in position best Indian Make Indian type Water closet suite consisting of (i) Closet Set Vitreous Chinaware W.C. Pan with horizontal inlet, for sinking into floor with A Pair of footrests, 10mm H.C.I. 'P' trap with or without vent as resuired as suitable joint for closet inlet. (ii) 12.5 ltrs. capacity mosquito proof cast iron flushing citern dust indian make (iii) 32mm diameter telescopic 1.25 mm thick galvanized inside and outside steel flushing pipes with clips. (a) 580mm (White) (HSR No. 30.01) | 11 | Each | |
| 30 | 1.29 | Provind and Fixing in position best Indian Make(as approved by the Engineer-in-charge) European type water closet suite, syphonic type consisting of (i) Vitreous chinaware syphonic suite with 15 litres capacity matching chinaware cistern and all internal brass fittings complete with 'p' os 's' strap with or without vent (as approved by the Engineer-in-charge) (ii) One piece seat and lid in hollow black or white plastic fitted with chromium plated hings and rubber buffers, (to the approval in Engineer-in-charge) complete in all respects including cutting and making good the walls and floors (a) single trap syphonic (i) (White) (HSR No. 30.5). | 2 | Each | |
| 31 | 1.3 | Provding and fixing HDPE Water Storage tank of sintex, Diplast, O.K. Supreme make with cover/ lids mark with IS 12701 on roof top of buildings including cost of hoisting and placing in position making connections with inlet and outlet pipes providing overflow and scour provisions with suitable plug on scour pipe including cost of nipples,washers, flanges for connections in tank complete in all respects to satisfaction of Engineer-in-Charge. (Except Civil Work) (HSR No. 30.119). | 6 | Each | |
| 32 | 1.31 | Providing and fixing in position 15mm i/d brass bib cocks of best quality( as required by Engineer-in-charge) (i) Bib Cock (ii) Bib cock long body (HSR No. 30.75). | 13 | Each | |
| 33 | 1.32 | Providing and fixing in position 15mm i/d brass bib cocks of best quality( as required by Engineer-in-charge) (i) Bib Cock (ii) Bib cock with long body (HSR No. 30.75). | 2 | Each | |
| 34 | 1.33 | Providing and fixing H.C.I. Floor trap ISI marked of the self cleaning design with C.P. Brass hingrd grating with frame without vent arm and incuding cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors etc. minimum depth of water should be 150mm with a minimum seal of 50mm (HSR No. 30.89). | 2 | Each | |
| 35 | 1.34 | Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete H.C.I grating 150mm × 150mm cast iron cover weighing approx. 7.26 kg and frame clear opening 300mm × 300mm and outside size 330mm × 330mm and chamber including cost of all brick work in cement mortar 1:5 cement concrete 1:8:6 in foundations and cement concrete 1:2:4 in coping around C.I. cober and frame etc. with three coats of black bitumastic superior paint of approved manufacture on all (HSR No. 30.114). | 1 | Each | |
| 36 | 1.35 | Providing and fixing in position H.C.I. soil waste vent or antisyphonage pipes to I.S.I. specifications of E.L.C. manufacturer or of any other reputed firm including cutting and wastage etc. and making good to its original condition but excluding cost of lead jointing (75mm internal Dia) (HSR No. 30.84). | 7 | Mtr. | |
| 37 | 1.36 | Providing and fixing PVC rain water pipe 6kg. Pressure of ISI mark in cement mortar during masonry work 100mm dia PVC pipe 6kg pressure (100mm) (HSR No. 13.89(a). | 12 | Mtr. | |
| 38 | 1.37 | Providing and fixing PVC Bend ISI mark (a) 100mm dia PVC Bend (HSR No. 13.9) | 4 | Each | |
| 39 | 1.38 | Providing and fixing G.I. pipes complete with G.I. fitting and clamps including cutting and good the walls etc. (Internal Work) concealed pipes including painting with anti corrosinobitumastic paint, cutting chases and making goot the wall (NS item). | 80 | Mtr. | |
| 40 | 1.39 | Providing and fixing G.I. pipes complete with G.I. fitting and clamps including trenching and refilling etc. (External work) (NS item). | 30 | Mtr. | |
| 41 | 1.4 | Lowering Salt glazed stone ware pipe and specials into trenches for all depths and laying out the same to correct alignement gradient levels etc. including all dressing and trimming and cutting of concrete beds and joints holes, supporting the pipes and specials in correct position in a suitable rigid manner while the same are being jointed and untill the surrroundingbenchings haunches and envelope are completed. The pipes shall rest on the beds at all points throughout their lengths and to ensure this they shall be grouted in where necessary as described in item No. 29.38 including carriage from the stoers of the engineer-in-charge and safe delivery thereof at sire of works. The internal diameter of sewer being - ( c) 200mm (HSR No.29.44) outer area. | 30 | Mtr. | |
| 42 | 1.41 | Inner area | 40 | Mtr. | |
| 43 | 1.42 | Wiring in 1.5 sq. mm PVC insulated copper conductor cable in 1.6mm thick conduit pipe (II) Light Point (Medium Point) (HSR No. 31.36). | 17 | Each | |
| 44 | 1.43 | Supply and erection of miniature circuit breaker/ isolator 240/415 V in the existing distribution board including making necessary connections:- (a) Miniature Circuit Breakers of 9 K.A. breaking capacity (i) 6 amp to 32 amp (Single Pole with netural) (HSR No. 31.17). | 1 | Each | |
| 45 | 1.44 | Supply and erection of metal clad switches/B.D.Bs with rag bolts on wall or on existing angle iron board/pedestal including bonding to earth and necessary connections: (i) Double pole Switch 16amp 240 volts (HSR No. 31.12). | 1 | Each | |
| 46 | 1.45 | Supply of Ceiling Light(as approved by the Engineer in charge) (NS item). | 17 | Each |
AI Tender Summary
Tender Timeline
Sep 12, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedSep 17, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 17, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender