Provision Of Operational Stores

Sharing tender

Provision Of Operational Stores:-1 ‘A ( Revised ) 2 B ( Revised ) Picket Of Size 65Mmx65mmx6mm Angle 2.55 M Long, Min Weight 14.79 Kgs With Tolerance + / - 5% With One Coat Of Red Oxide With Holes And Notched. Steel To Be Confirming To Relevant Is Specification. Make : Tata / Jindal / Sail 3 ‘C ( Revised ) Picket Of Size 65Mmx65mmx6mm Angle 2.25M Long, Min Wt 13.05 Kgs With Tolerance= / - 5% With One Coat Of Zinc Chromate Primer With Holes And Notches. Steel To Be Isi Marked.Make -Tata / Jindal / Sail 4 ‘D Picket Of 65X65x6mm Angle, 1.35M Long Min Wt 7.83 Kgs With Tolerance + / - 5% With One Coat Of Red Oxide With Holes And Notches. Steel To Be Isi Marked. Make : Tata / Jindal / Sail 5 Punched Tape Concertina Coil ( Including Spike Handle ) With 50 Turns And Dia 1050 Mm Having A 2.6 Mm Dia Core Wire Of High Carbon Spring Steel Of High Tensile Strength. The Punched Tape And Core Wire Are Elecyrogalvanised To Provide Protection Against Outdoor Exposure. The Punched Tape Is Machenically Crimped Over The Cover Wire And Then Formed In To A Coil At Various Parts Of The Periphery Of The Coil Steel Clips Connect The Individual Turns Of The Coil To Each Other So That It Opens Up Like An Accordion. The Width Of Barbed As 9Mm And Spacing Of Clips 23.5 Mm To 24.5 Mm C / C The Weight Of Each Coil Will Be 15.2 +5% Kgs Without Packing Material And Coil Length 15 Mtr When Opened Up. Each Coil Wowound With Bituminized Hession Cloth For Providing Protection Coating As Per Specification No Ind / Eng / Prov / 1245 Is For Raw Material And Drawing Imga 0112 / B ( Sheet 1 Of2 ) , Impd-1821 / B And Impd-1822 / B. 6 Punched Tape Baby Coil ( Including Spike And Handle ) With 50 Turns And Dia 600Mm, Having A 2.6Mm Dia Core Wire Of High Carbon Spring Steel Of High Tensile Strength. The Punched Tape And Core Wire Are Electro Galvanized To Provide Protection Against Out Door Exposure. The Punched Tape Is Mechanically Crimped Over The Cover Wire And Then Formed Into A Coil At Various Parts Of The Periphery Of The Coil Steel Clips Cannect The Individula Turns Of The Coil To Each Other So That It Opens Up Like An Accordion. The Weight Of Each Coil Will Be 9.5+5% Kgs Without Packing Material And Coil Length 7.5 Mtr When Opened Up. Each Coil Wound With Bituminized Hession Cloth For Providing Protective Coating As Per Specification No Ind / Eng / Prov / 1245 Is For Raw Material And Drawings Imga 0112 / B ( Sheet 1 Of 2 ) , Imba-0112 / C ( Sheet 2 Of 2 ) , Impd-1817 / B, Impd-1820, Impd-1821 / B And Impd-1822 / B. 7 Tor Panel Size 1.5Mx1mx10mm Rod Shall Be A Mesh Frame Made Up Of Rts Bar. The Bars Shall Be Connected To Each With Welding. 8 Barbed Wire. Galvanized Iron Two Strands Barbed Wire Hot Rolled Of 2.5Mm Dia Line Wire And 2.00Mm Dia Wire For Barbs. Weight Shall Be Approximately 120Gm Per Meter With The Tolerance Of +2%. The Distance Between Two Barbs Shall Be 75Mm Plus Or Minus 12Mm. Gi Barbed Wire Be Confirming To Is : 278-1978. The Galvanized Barbed Wire Shall Be Manufactured From Hot Dipped Galvanized Mild Steel Wire Confirming To Is : 280-1972P 9 W8 / 5660-000008 Spool Plastic With Punched Tape 50 Mtr As Per Specification No Cqae / 5660 / 1515 / 2001 & Drg No Imga-0113 / A, Imsa-0289 / A, Impd-1818 / A, Impd-1819 And Impd-1820 And Galvanized Should Be As Per Is-209. 10 Punjies 5 Prong Made Of 8 Mm Dia Ms Bar Having Weight 0.55 Kg Each + / - 5% Tolerance In Weight. One Coat Of Zinc Chromate Primer Shall Be Provided To The Punjies After Welding Work. 11 Gi Binding Wire Annealed Not Less Than 0.9 Mm Dia. 12 Ms Pole Overall Total Length Of 20’ Long 80Mm Nominal Dia, ( Wall Thickness 88.9 Mm Outer Dia And 4.05 Mm Wall Thickness ) Medium Grade Ms Pipe 12’ Long And 50 Mm Nominal Dia, 60.3Mm Outer Dia Medium Grade 3.63 Mm Wall Thick Ms Pipe 8’ Long Welded With Base Plate6mm Thick Of Size 300X300mm. Complete With One Coat Of Red Oxide Primer