Defence Statutory Bodies & Commissions/Committees Closing in 0 days TDR #21736116

Provision Of 01 X 10 Men Fd Shelter For 84 Inf Bde

Issued by Statutory Bodies & Commissions/Committees · SUJANPUR, Punjab
Tender Value
Ref. Documents
Estimated cost
Bid Submission
17 Sep 2019
0 days left
EMD
13000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Organization
Click here to view tendering authority
Tender ID
Click here to view tender id
Competition Type
NCB
Bidding Type
Tender
Location / State
SUJANPUR → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Click here to view website
Contact Person
Click here to view contact person
Address
Click here to view address

Project Description

PROVISION Of 01 X 10 Men Fd Shelter For 84 Inf Bde

BOQ

Name of Work:Provn of 01 x 10 Men Fd Shelter for 84 Inf Bde (Job No 4986)
Sl.No.Item DescriptionItem Code / MakeQuantityUnits
11Store list for Provn of 01 x 10 Men Fd Shelter
21.01Prefabricated multipurpose 10 Men Fd shelter of size 7.32m X 6.10 m and 2.60m clear height upto ceiling with one side verandah of width 1.525m including structure with roof, 02 x door, 04 x windows, false ceiling, wall panel, roof purlin, truss, vertical column, painting, foundation bolt, nut and bolts, etc. (Refer DGS&D Drg No 116 (version 2015)item 11Nos
32Plumbing and Sanitary items
42.01Rotational moulded polyethylenewater storage tank three layer (cylindrical vertical with closed top of 500 ltr capacity) with cover/lid one set of moulded assy. \nMake- SINTEX/POLYCONitem 21Nos
52.02MS Steel staging for 500 ltr water tank as per drg (Store as given below):-\n(a) Water storage for 500 ltr Tank stands of size1.2m x 1.2m x 3m made of angle iron 50 x50 x 6mm vertica column and 50mmx50mm x 6mm horizontal for top of staging , FI 40x6mm for diagonal/ horizontal members 20 Nos . 6mm thick MS plate size 1.00x1.0 on top fixing/ welded on Angle iron . At the bottom of each vertical members and FI 40 x8mm shall be provided for stable of the staging. 4 Nos MS plate size 200mm x200mmx 8mm pre drilled hiles for fdn bold 22 mm dia .Details are given in drawing. Suitable joining arrangement shall be given and the approval of the consignee shall be taken during pilot sample inspection. All steel surfaces of staging shall be given two coats of synthetic enamel paint of green color over one coats of red oxide primer after preparation of surfaces. Grade 1st quality of paint will be used. The water supply system should be planned properly. Air vent pipes should be incl at the out lets from over head tanks. OHTs should have a control valve at the exit. Make:TATA/SAIL/JINDAL\n\n(b) Foundation shall be 300mm x300mm x600mm below GL in PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in mass concrete/sub base. 04 x Fdn bolts of 22mm x 450mm with nut & washer shall be grouted in each column fdn. \n(i) Colums ISA 50mm x 50mm x 6mm Make: TATA/SAIL/JINDAL - Kg - 82.80\n(ii) Colums ISA 40mm x 40mm x 6mm Make: TATA/SAIL/JINDAL - Kg - 7\n(iii) Base Plate 200mm x 200mm x8 mm Make: TATA/SAIL/JINDAL - Kg 10.05\n(iv) MS sheet size 1.00mx1.00m x6mm thick Make: TATA/SAIL/JINDAL - Kg - 47.10\n(v) FI for Bracing 40mm x 6 mm Make: TATA/SAIL/JINDAL - Kg - 37.60\n(vi) FI for stable 40mm x 8 mm Make: TATA/SAIL/JINDAL - Kg - 12.05\n(vi) Red Oxide zinc chrome Primer shall be conforming to IS 2074 : 1992 IInd Revision Make- ASIAN/BERGER/NEROLAC - Ltr - 0.20\n(vii) Synthetic Enamel Black colour 1st Quality conforming to IS 2932-2003 , Make- ASIAN/BERGER/NEROLAC - Ltr - 0.10 (viii) Turpentine Oil - Ltr - 0 .10\n(ix) Ordinary Portland Cement grade 43, - Bag - 02\nitem 31Nos
62.03Brass Float valve 20 mm with brass rod. \nMake:PRAYAG/LEGENDitem 41Nos
72.04CP Brass stop cock std 15mm dia confirming to IS1239-2004 with fixing arrangment \nMake:JAQUAR/PARCO/GEM.item 51Nos
82.0515mm dia GI pipe 20' long med grade with all fitting confirming to IS 1239-2004.\nMake TATA/JINDAL/OSWAL.item 63Nos
92.0620mm dia GI pipe 20' long med grade with all fitting conforming to IS 1239-2004. \nMake TATA/JINDAL/OSWAL.item 76Nos
102.07Elbow 20mm (ISI Marked)Conforming to IS-1239-2004 \nMake TATA/JINDAL/OSWAL.item 85Nos
112.08Elbow 15mm (ISI Marked) Conforming to IS-1239-2004 \nMake TATA/JINDAL/OSWAL.item 95Nos
122.09Socket 15mm (ISI Marked) Conforming to IS-1239-2004\nMake TATA/JINDAL/OSWAL.item 104Nos
132.1Union 15mm (ISI Marked) Conforming to IS-1239-2004\nMake TATA/JINDAL/OSWAL.item 114Nos
142.11Tee 20mm (ISI Marked) Conforming to IS-1239-2004 \nMake TATA/JINDAL/OSWAL.item 122Nos
152.12Tee 15mm (ISI Marked) Conforming to IS-1239-2004\nMake TATA/JINDAL/OSWAL.item 132Nos
162.13Nipple 15 mm x100mm long (ISI Marked) Conforming to IS-1239-2004 Make TATA/JINDAL/OSWAL.item 142Nos
172.14Gatevalve Brass 20mm \nMake TATA/JINDAL/OSWAL.item 151Nos
182.15Tank Nipple 20mm \nMake TATA/JINDAL/OSWAL.item 161Nos
192.16GI pipe clamp 20mm with nut & screwitem 175Nos
202.17GI pipe clamp 15mm with nut & screwitem 185Nos
212.18Solvent Cementitem 190.1Kgs
222.19Safedaitem 200.5Kgs
232.2RO for water purification with UV control and capacity 10 Ltr\nMake: KENT/AQUAGUARD.item 211Nos
243Electrical Store
253.01PVC insulated Cable elect 1.5 Sqmm single core copper cunductor unsheathed conforming to IS 694-1990,\nMake :HAVELLS/ANCHOR/PLAZA.item 22200RM
263.021 Sqmm single core multi stranded copper conductor FR PVC insulated (unsheathed) heavy duty cable. \nMake :HAVELLS/ANCHOR/PLAZA.item 2325RM
273.03PVC insulated Cable 10 Sqmm 2 core Aluminium cunductor unarmoured with 4mm dia GI wire and round type insulator S/C \nMake :HAVELLS/ANCHOR/PLAZA.item 2450RM
283.04Flexible wire three core 23/0.0076 confirming ot IS 9537 PT III 1983\nMake :HAVELLS/ANCHOR/PLAZA.item 2515Nos
293.05LED Tube light fitting 20 watt, Ultra bright glass shell, glare fee, wide angle, double side connection retofit LED tube G 13 lamp holder complete with fixing accessories. \nMake :- BAJAJ/PHILIPS/HAVELLS.item 266Nos
303.06LED 5W with holder, \nMake :- BAJAJ/PHILIPS/HAVELLS.item 272Nos
313.07PVC Ceiling Rose 4'' dia \nMake : ANCHOR/WIPRO/POLY PLAST.item 2813Nos
323.08Switch piano type 5/6 Amps 230 Volts confirming to IS 3854-1966 \nMake :- ANCHOR/HAVELLS/BAJAJ.item 2913Nos
333.09Switch Board T/W 4''X4'' confirming to IS 347-1975 with 3mm thick hylam sheet best quality.item 309Nos
343.1CP Screw 25mm (per pkt 100 Nos)item 31200Nos
353.11PVC InsulationTape of size 20mm ISI Marked. \nMake : STEEL GRIP/FINOLEX.item 322Roll
363.12PVC Casing caping square box 30x16mm confirming to IS 14927 (Part II) \nMake : ANCHOR/WIPRO/POLY PLAST.item 33200RM
373.13PVC Junction box 3 way. \nMake :- ANCHOR/HAVELLS/BAJAJ.item 342Nos
383.14PVC Junction box 2 way. \nMake :- ANCHOR/HAVELLS/BAJAJ.item 352Nos
393.15Wall mounting fan 450mm sweep 230V complete with inbuilt regulator, \nMake :- USHA/HAVELLS/BAJAJ.item 364Nos
403.16Main Swith 32 Amps, 240V DP confirming to IS 13947-1993.\nMake :- ANCHOR/HAVELLS/BAJAJ.item 371Nos
413.17(xiii) 5 Amp switch socket combination 240 volt along with gang box. \nMake :- ANCHOR/HAVELLS/BAJAJ.item 3810Nos
423.18(xiv) 15/5 Amp switch socket combination 240 volt along with gang box. \nMake :- ANCHOR/HAVELLS/BAJAJ.item 394Nos
433.19GI Service bracket of 1.2mtr long of GI pipe light grade 40mm diaitem 401Nos
443.26W LED rechargable emergency light.\nMake: PHILIPS/EVEREADYitem 412Nos
453.21Earthing complete set comprising of GI earth plate 600 x 600x3mm thick, GI wire for earthing 4mm dia 16mtr, CI pit cover with hinged and locking arrangement of size 300 x300x3mm thick, funnel with wire mesh, GI pipe 20mm dia 10 ft long , charcoal 50 Kgs and salt 50kgs.\n\n(i) GI earth plate of size (600x600x6mm) -Nos- 1 \n(ii) GI Cover with frame (300x300x6mm)- Nos -1\n(iii) GI Pipe light grade (20mm dia x 1.3m) Long - Nos- 1\n(iv) GI wire 4 mm diameter (For Service wire). -RM -16\n(v) Charcoal dust -Kgs- 50\n(vi) Salt -Kgs-50\n(vii) Ordinary Portland Cement grade 43, IS-12269-1990, packed in- 50 kgs HDPE bags conforming to ISI 1652/2000. Make : ACC/Ambuja/JK.- Kgs- 20\n(viii) GI pipe 15mm dia for protection of GI wire -RM- 16\n(ix) Nut and Bolt for fixing of GI wire with GI plate -Nos- 2\n(x) MS clamp for fixing of proteciton pipe of 15mm dia - Nos - 16\n\n\nitem 421Nos
464Furniture
474.01Double sleeping bunk with Coir mattress KURLON/SLEEPWELL/DUROFLEX of size 1890mm x 915 mm x100 mm shall be provided with each bunk with bed mattresses conforming to IS : 13489/2000 shall be provided alongwith each (10 Men Shelter) along with 12 mm thick waterproof will be two nos provided and confirming to specification as per sketch 'S' att. Double bunk of each shelter-5.Mettress of each shelter-10.item 435Nos
484.02Fire extnguisher 02 kgs capacity, foam typw MAP-90 alongwith its accessories confirming to IS 13849 \nMake CEASEFIRE/Seferoitem 442Nos
494.03Heating Device (kerosene based). Heating device convection type max heat output 23.00 BTU/hr integral fuel tank capacity 7.19 Ltrs capable for continuous combustion approx 8-12 hr maximum fuel consumption 0.632 ltr/hr ignition method by battery. Dimension 26.8” ht , 17.5” depth and 10mm wick ht. \nMake – TOYOTOMI Lc-43 / Sengoku CV-22 and Sengoku CV-23Kitem 452Nos
504.04Bed Side Steel Locker of size not less than 700 x 400 x 1600 mm height having two separate locking arrangement for each shutter and steel handles.Make:GODREJ/USHA LEXUS/DYNASTY ALMIRAH.item 465Nos
514.05Looking mirror of size 0.9 m x 0.6 m. \nMake-SAINT GOBAIN /MODIGUARDitem 472Nos
524.06Water camper 5 Ltr capacity \nMake: MILTON/NEELKANTHitem 482Nos
534.07Lightening conductor shall be provided with aluminium rod of 12mm dia 300mm long. Aluminuum down conductor (25mm x 3mmx 6m) GI earth plate of size 600x600x6mm CI Cover with frame (300x300x6mm), GI pipe light grade (20mm dia x 1.3mm) long 3mm perforations upto a length of 60mm with MS funnel, GI striip, (32mmx6mmx4x) GI pipe light grade 40mmx6mm, with base plate (300x300x8mm) and specials socket and plug 40mm Clamps (20mmx3mm) suitable for 40mm dia pipe- 06 Nos, bolts and nuts (6mm sia x30mm)- 04 Nos Charcol dust 50kgs, Salt 50kg complete all as per IS 2309-1969.item 491Nos
545Constr Material : - Following construction material will be used for fdn of column, plinth protection, sub base & flooring.
555.01Ordinary Portland Cement grade 43, IS-12269-1990, packed in 50 kgs HDPE bags conforming to ISI 1652/2000. \nMake : ACC/Ambuja/Birla/Ultra/JK Cement.item 5073Bags
565.02Hardcore 63 mm Stone Aggregates Stone aggregate shall be crushed stone not exceeding 63mm graded conforming to IS-383 -1970 and shall be clean hard tough, durable and of uniform quality throughout. The aggregate shall be free from soft disintegrated materials, vegetable and other organic impurities.item 5110Cum
575.03Common building bricks sub class 'B' of side 23cmx11.5cm conforming to IS 1077-1986, Average compressive strength not less than 75Kg/Cm2item 525500Nos
585.04Non skid ceramic floor Tiles of size 600mmx600mmx8-10mm thick \nMake –JOHNSON/KAJARIA/SOMANY.item 53160Nos
595.05White Cement\nMake : JK/Birla/Bergeritem 5411Kgs
605.06Water proofing compound. \nMake: Dr Fixit/EPDM/Pediliteitem 557Kgs
616Erection Tools
626.01Drill bits 8mm Heavy Duty \nMake :BOSCH/HARISSON/POWER TECHitem 568Nos
636.02Drill bits 6mm Heavy Duty (Make : Make :BOSCH/HARISSON/POWER TECHitem 578Nos
646.03Drill bits 9/64\" in Packet of 10 Nos \nMake :BOSCH/HARISSON/POWER TECHitem 582Nos
656.04Drill bits 1/8\" in Packet of 10 Nos\n Make :BOSCH/HARISSON/POWER TECHitem 592Nos
666.05Double ended spanner 3/8\" x 5/16\" \nMake :BOSCH/HARISSON/POWER TECHitem 602Nos
676.06Double ended spanner 1/2\" x 7/6\" \nMake :BOSCH/HARISSON/POWER TECHitem 612Nos
686.07Adjustable spanner 12\" \nMake :BOSCH/HARISSON/POWER TECHitem 621Nos
696.08Screw driver with insulated plastic handle 8\" \nMake : TAPARIA/ESTMON/PIEitem 631Nos
706.09Screw driver with insulated plastic handle 15\" \nMake : TAPARIA/ESTMON/PIEitem 641Nos
716.1Hammer 200 gms with wooden handle \nMake : TAPARIA/ESTMON/PIE conforming to IS 4953/1973item 651Nos
726.11Insulated electric Plier 6\" Conforming to IS 10353-1982 for Make : TAPARIA/ESTMON/PIEitem 661Nos
736.12Hand wood saw 18\" Make : EAGLE/HIRAitem 671Nos
746.13Pipe Wrench 12\" best quality as per directed.item 681Nos
756.14Hack saw fram Make : EAGLE/HIRAitem 691Nos
766.15Hack saw blades both sides Make : Eagle/Hiraitem 7024Nos
776.16Bustard half round file 18\" Bastered Make : EAGLE/HIRAitem 711Nos
786.17Round File 3/8\" Make : EAGLE/HIRAitem 721Nos
796.18PGI Tool box of size 60 x 45 x 30cm complete set with lock (Make of lock : 7 levers 50mm Godrej Navtal with three keys)item 731Nos
806.19Tile cutter with 6 spare blades \nMake :BOSCH/HARISSON/POWER TECHitem 741Nos
816.2Silicon Gunitem 751Nos
826.21Silicon Tubeitem 766Nos
836.22Bricks trowel steel 305 mm \nMake : TAPARIA/TATAitem 772Nos
846.23Ruber hand gloves superior qualityitem 788Pair
856.24Shovel square nose medium type fittd with storng steel crutched wooden handlesitem 791Nos
866.25Pick axe with chisel and point ends (Kudali 14 CP) nominal weight 3.0 kg, overall length (minimum) 595 mm with handleitem 801Nos
876.26Galvanised iron Pan motar (Tasla) 18 gauge, 16\" dia minium weight 01 Kgitem 812Nos
886.27Plaster trowel with wooden handle ISI Markeditem 822Nos
896.28Water Bucket Steel 13\" diaitem 831Nos
906.29Aluminium Plaster Rod 1.2m long best qualityitem 841Nos
916.3Safety Harness complete setsitem 852Nos
927Labours & Plants:-
937.01Skilled Labour (02 Men Per Day)item8612Days
947.02UnSkilled Labour (02 Men Per Day)item8712Days
957.03Hiring of JCB for 4 hours per dayitem881Days
967.04Hiring of concrete mixer machineitem892Days

AI Tender Summary

OUR REF NO 21736116
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE Ref. Documents
LAST DATE 17-09-2019
Authority
Authority Name Indian Army
Work Description PROVISION Of 01 X 10 Men Fd Shelter For 84 Inf Bde
Basic Detail
Tender No 320/QTN/PTK/2019-20/14/OPW
Bidding Type Tender
Location
City SUJANPUR
State Punjab
Key Dates
Publish Date 09 Sep 2019
Submission Date 17 Sep 2019
Open Date 18 Sep 2019
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD 13000
Exemption Not Available
Document List
FDB58F19-2D93-4D11-BE88-7FB648E8E5AC.html
BOQ_315649.xls
Tendernotice_1.pdf
FRFP3.pdf
AI-generated summary — verify details from the official tender portal before submission.

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 09, 2019
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 17, 2019
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Sep 18, 2019

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

FDB58F19-2D93-4D11-BE88-7FB648E8E5AC.html

xls

BOQ_315649.xls

pdf

Tendernotice_1.pdf

pdf

FRFP3.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders