Renovation Upgradation Of Type-Ii 28 Nos Qtrs ( No . 01 To 28 ) At Bn Hq Of 56 Bn Bsf Sam Road Under Shq Bsf Jsmr South Civil Work
Tender Value
57.67 Lakhs
Estimated cost
Bid Submission
18 Sep 2019
0 days left
EMD
1.15 Lakhs
Bank guarantee accepted
Document Fee
1
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
BN HQ BSF CAMPUS SAM ROAD JAISALMER of 56 BN BSF → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Renovation Upgradation Of Type-Ii 28 Nos Qtrs ( No . 01 To 28 ) At Bn Hq Of 56 Bn Bsf Sam Road Under Shq Bsf Jsmr South Civil Work
BOQ
| Name of Work : Renovation/Upgradation of Type-II 28 No’s Qtrs (No. 01 to 28) at BN HQ of 56 BN BSF Sam Road under SHQ BSF JSMR (S). | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | BI01010001010000000000000515BI0100001113 | 2674.31 | Sqm |
| 2 | 2 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below | BI01010001010000000000000515BI0100001114 | 196 | each |
| 3 | 3 | Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001115 | 392 | kg |
| 4 | 4 | 20 mm cement plaster of mix :1:6 (1 cement : 6 fine sand) | BI01010001010000000000000515BI0100001116 | 2674.31 | sqm |
| 5 | 5 | 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand) | BI01010001010000000000000515BI0100001117 | 55.44 | sqm |
| 6 | 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size). | BI01010001010000000000000515BI0100001118 | 22.62 | cum |
| 7 | 7 | Centering and shuttering including strutting, propping etc. and removal of form for all heights : Stairs, (excluding landings) except spiral-staircases | BI01010001010000000000000515BI0100001119 | 123.9 | sqm |
| 8 | 8 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). | BI01010001010000000000000515BI0100001120 | 13.16 | cum |
| 9 | 9 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Cold twisted bars | BI01010001010000000000000515BI0100001121 | 1075.2 | Kg |
| 10 | 10 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete | BI01010001010000000000000515BI0100001122 | 1249.08 | sqm |
| 11 | 11 | Distempering with 1st quality acrylic washable distemper (ready mixed) of approved manufacturer and of required shade and colour complete. as per manufacturer's specification. Two or more coats on new work | BI01010001010000000000000515BI0100001123 | 5564.86 | sqm |
| 12 | 12 | Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) : Flush / ruled pointing | BI01010001010000000000000515BI0100001124 | 1363.18 | Sqm |
| 13 | 13 | Finishing walls with Acrylic Smooth exterior paint of required shadeOld work (One or more coat applied @ 0.90 ltr/10 sqm). | BI01010001010000000000000515BI0100001125 | 260.9 | sqm |
| 14 | 14 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two or more coats on new work | BI01010001010000000000000515BI0100001126 | 1046.92 | sqm |
| 15 | 15 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing. 30 mm thick plain PVC door shutters | BI01010001010000000000000515BI0100001127 | 78.4 | sqm |
| 16 | 16 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineerin-Charge | BI01010001010000000000000515BI0100001128 | 263.2 | mtr |
| 17 | 17 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | BI01010001010000000000000515BI0100001129 | 167.58 | sqm |
| 18 | 18 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :250x16 mm | BI01010001010000000000000515BI0100001130 | 196 | each |
| 19 | 19 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 200x10 mm | BI01010001010000000000000515BI0100001131 | 504 | each |
| 20 | 20 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :\n 125 mm | BI01010001010000000000000515BI0100001132 | 504 | each |
| 21 | 21 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | BI01010001010000000000000515BI0100001133 | 28 | each |
| 22 | 22 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. | BI01010001010000000000000515BI0100001134 | 28 | each |
| 23 | 23 | Renewing glass panes and refixing existing wooden fillets Float glass panes of thickness 4 mm | BI01010001010000000000000515BI0100001135 | 101.64 | sqm |
| 24 | 24 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sum including pointing in white cement mixed with pigment of matching shade complete. | BI01010001010000000000000515BI0100001136 | 286.44 | sqm |
| 25 | 25 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete. | BI01010001010000000000000515BI0100001137 | 81.62 | sqm |
| 26 | 26 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Area of slab over 0.50 sqm | BI01010001010000000000000515BI0100001138 | 31.92 | sqm |
| 27 | 27 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick | BI01010001010000000000000515BI0100001139 | 42.84 | sqm |
| 28 | 28 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete | BI01010001010000000000000515BI0100001140 | 28.56 | sqm |
| 29 | 29 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required 610x460 mm bowl depth 200 mm | BI01010001010000000000000515BI0100001141 | 28 | each |
| 30 | 30 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore | BI01010001010000000000000515BI0100001142 | 56 | each |
| 31 | 31 | Providing and fixing brass bib cock of approved quality :15 mm nominal bore | BI01010001010000000000000515BI0100001143 | 56 | each |
| 32 | 32 | Providing and fixing brass stop cock of approved quality :15 mm nominal bore | BI01010001010000000000000515BI0100001144 | 112 | each |
| 33 | 33 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 450x 300 mm with single 15 mm C.P. brass pillar tap | BI01010001010000000000000515BI0100001145 | 28 | each |
| 34 | 34 | Providing and fixing 100 mm sand cast Iron grating for gully trap | BI01010001010000000000000515BI0100001146 | 84 | each |
| 35 | 35 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore | BI01010001010000000000000515BI0100001147 | 28 | each |
| 36 | 36 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) | BI01010001010000000000000515BI0100001148 | 336.23 | cum |
| 37 | 37 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size). | BI01010001010000000000000515BI0100001149 | 14.74 | cum |
| 38 | 38 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | BI01010001010000000000000515BI0100001150 | 28 | each |
| 39 | 39 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Circular tank | BI01010001010000000000000515BI0100001151 | 14000 | per litre |
| 40 | 40 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter | BI01010001010000000000000515BI0100001152 | 28 | each |
| 41 | 41 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.\nInternal work - Exposed on wall 15 mm nominal outer dia Pipes | BI01010001010000000000000515BI0100001153 | 280 | mtr |
| 42 | 42 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.External work 25 mm nominal outer dia Pipes | BI01010001010000000000000515BI0100001154 | 420 | mtr |
| 43 | 43 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.External work 40 mm nominal outer dia Pipes | BI01010001010000000000000515BI0100001155 | 280 | mtr |
| 44 | 44 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :.\n | BI01010001010000000000000515BI0100001156 | 28 | each |
| 45 | 45 | Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main :20 mm nominal bore \n | BI01010001010000000000000515BI0100001157 | 28 | each |
| 46 | 46 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :15 mm nominal bore | BI01010001010000000000000515BI0100001158 | 90 | each |
| 47 | 47 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :25 mm nominal bore | BI01010001010000000000000515BI0100001159 | 56 | each |
| 48 | 48 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 40 mm nominal bore | BI01010001010000000000000515BI0100001160 | 56 | each |
| 49 | 49 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :In 75x75mm deep chase | BI01010001010000000000000515BI0100001161 | 397 | metre |
| 50 | 50 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Semi rigid pipe 32 mm dia | BI01010001010000000000000515BI0100001162 | 56 | each |
| 51 | 51 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 30 mm thick shuttersKiln seasoned and chemically treated hollock wood | BI01010001010000000000000515BI0100001163 | 79.66 | sqm |
| 52 | 52 | Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete excluding plastering of the jambs, sills and soffits.25 mm thick | BI01010001010000000000000515BI0100001164 | 28 | sqm |
| 53 | 53 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :15 mm nominal bore | BI01010001010000000000000515BI0100001165 | 28 | each |
| 54 | 54 | Providing and fixing fly proof galvanised M.S. wire gauze to windows and clerestory windows using galvanised M.S. wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm.With 2nd class teak wood beading 62X19 mm | BI01010001010000000000000515BI0100001166 | 197.26 | sqm |
| 55 | 55 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour.450MM long towel rail with total length of 495mm, 78mm wide and effective height of 88mm, weighing not less than 170gms. | BI01010001010000000000000515BI0100001167 | 28 | each |
| 56 | 56 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) | BI01010001010000000000000515BI0100001168 | 976.36 | sqm |
| 57 | 57 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. | BI01010001010000000000000515BI0100001169 | 160 | kg |
| 58 | 58 | Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/ sqm). | BI01010001010000000000000515BI0100001170 | 56.7 | sqm |
| 59 | 59 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter | BI01010001010000000000000515BI0100001171 | 168 | mtr |
| 60 | 60 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Coupler 110 mm \n | BI01010001010000000000000515BI0100001172 | 40 | each |
| 61 | 61 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Single pushfit Coupler 110 mm \n | BI01010001010000000000000515BI0100001173 | 40 | each |
| 62 | 62 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Single tee with door 110x110x110 mm\n | BI01010001010000000000000515BI0100001174 | 40 | each |
| 63 | 63 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee without door 110x110x110 mm\n\n | BI01010001010000000000000515BI0100001175 | 40 | each |
| 64 | 64 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Bend 87.5° 110 mm \n | BI01010001010000000000000515BI0100001176 | 40 | each |
| 65 | 65 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Shoe (Plain) | BI01010001010000000000000515BI0100001177 | 40 | each |
| 66 | 66 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | BI01010001010000000000000515BI0100001178 | 14 | each |
| 67 | 67 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. | BI01010001010000000000000515BI0100001179 | 56 | each |
| 68 | 68 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :\n150 mm diameter | BI01010001010000000000000515BI0100001180 | 112 | mtr |
| 69 | 69 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 150 mm diameter | BI01010001010000000000000515BI0100001181 | 112 | mtr |
| 70 | 70 | Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps :150 mm diameter | BI01010001010000000000000515BI0100001182 | 112 | mtr |
| 71 | 71 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P typeWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | BI01010001010000000000000515BI0100001183 | 28 | each |
| 72 | 72 | Providing and fixing soil, waste and vent pipes :100 mm diaCentrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 | BI01010001010000000000000515BI0100001184 | 140 | mtr |
| 73 | 73 | Providing and fixing soil, waste and vent pipes :75 mm diaCentrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 | BI01010001010000000000000515BI0100001185 | 112 | mtr |
| 74 | 74 | Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. :For 100 mm dia pipe | BI01010001010000000000000515BI0100001186 | 112 | each |
| 75 | 75 | Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : For 75 mm dia pipe | BI01010001010000000000000515BI0100001187 | 56 | each |
| 76 | 76 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.100 mm diaSand cast iron S&S as per IS - 3989 | BI01010001010000000000000515BI0100001188 | 28 | each |
| 77 | 77 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.75 mm diaSand cast iron S&S as per IS- 3989 | BI01010001010000000000000515BI0100001189 | 28 | each |
| 78 | 78 | Providing and fixing plain bend of required degree.100 mm diaSand cast iron S&S as per IS - 3989 | BI01010001010000000000000515BI0100001190 | 28 | each |
| 79 | 79 | Providing and fixing plain bend of required degree.75 mm diaSand cast iron S&S as per IS - 3989 | BI01010001010000000000000515BI0100001191 | 28 | each |
| 80 | 80 | Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.100x100x100x100 mmSand cast iron S&S as per IS - 3989 | BI01010001010000000000000515BI0100001192 | 28 | each |
| 81 | 81 | Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.75x75x75x75 mm Sand cast iron S&S as per IS - 3989 | BI01010001010000000000000515BI0100001193 | 28 | each |
| 82 | 82 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primerFixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001194 | 1009.4 | kg |
| 83 | 83 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.Kiln seasoned and chemically treated hollock wood 30 mm thick | BI01010001010000000000000515BI0100001195 | 83.09 | sqm |
| 84 | 84 | Providing /laying 20 to 25 mm size glazed tiles pieces for roof treatment having colour and shade as approved by engineer in charge over 20 mm thick layer of cement mortar 1: 4 mix (1 cement : 4 coarse sand) with application of cement slurry includding finishing of joint with ordinary cement and curing etc. complete in all respect includding washing with acid. | BI01010001010000000000000515BI0100001196 | 504 | sqm |
| 85 | 85 | P/L Jaisalmer stone gang saw cut 50 mm thick | BI01010001010000000000000515BI0100001197 | 174.72 | each |
AI Tender Summary
Tender Timeline
Sep 09, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 20, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender