Maintenance And Repair To Water Supply Distribution System At Silk Mill Colony , Hamalwada , Shahsokta Colony , Sadat Nagar , Rahul Nagar , Itkheda , Sai Vrundawan Colony , Kanchanwadi , Nakshtrwadi , Satara , Deolai In Zone No . 8, AMC E-TENDER CELL PHASE - 3 BUILDING, AURANGABAD-Maharashtra

maintenance and repair To Water Supply Distribution System At Silk Mill Colony , Hamalwada , Shahsokta Colony , Sadat Nagar , Rahul Nagar , Itkheda , Sai Vrundawan Colony , Kanchanwadi , Nakshtrwadi , Satara , Deolai In Zone No . 8 , item no . 1 excavation for foundation / pipe trenches in earth , soils of all types , sand , gravel and soft murum , including removing the excavated material upto a distance of 50 metres and lifts as below , stacking and spreading as directed , normal dewatering , preparing the bed for foundation and excluding backfilling , etc comp . lift 0 to 1 . 50 m mjp / dsr / 2018-19 / page no . 34 i . no . 1 , item no . 2 excavation for foundation / pipe trenches in hard murum and boulders , w . b . m . road including removing the excavated material upto a distance of 50 metres and lifts as below , stacking and spreading as directed , normal dewatering , preparing the bed for foundation and excluding backfilling , etc comp . lift 0 to 1 . 50 m mjp / dsr / 2018-2019 / page no . 34 i . no . 3 , item no . 3 excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road by all means including removing the excavated material upto a distance of 50 metres and lifts as below , stacking and spreading as directed , normal dewatering , preparing the bed for foundation and excluding backfilling , etc comp . lift 0 to 1 . 50 m mjp / dsr / 2018-2019 / page no . 34 i . no . 5 , item no . 4 excavation for foundation / pipe trenches in hard rock and concrete road by chiselling , wedging , line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed , removing the excavated material upto a distance of 50 metres and lifts as below , stacking and spreading as directed , normal dewatering , preparing the bed for foundation and excluding backfilling , etc comp . lift 0 to 1 . 50 m mjp / dsr / 2018-2019 / page no . 35 i . no . 7 , item no . 5 providing and supplying asbestos cement pressure pipes manufactured and tested as per iso-160 standards of following class and diameter in standard lengths including cost of all taxes ( central and local ) , insurance , railway freight , inspection charges , unloading from railway wagon , loading into truck , transporting to departmental store / site , unloading , stacking etc . complete mjp / dsr / 2012-2013 / page no . 57 . i . no . 1 , a ) class 15 ( test pressure 1 . 5 mpa ) , 80mm , 100mm , 150mm , 200mm , 250mm , 300mm , item no . 6 lowering , laying and jointing with cid joints , a . c . pressure pipes and ci or ms specials of following class and diameters including conveyance from stores to site of works , cost of labour and material , giving satisfactory hydraulic testing , etc . as per isi code , etc . complete but excluding cost of c . i . d . joints , nut bolts , rubber rings . mjp / dsr / 2012-2013 / p . no . 59 i . no . 4 ( a ) , a ) class 15 ( test pressure 1 . 5 mpa ) , 80mm , 100mm , 150mm , 200mm , 250mm , 300mm , item no . 7 providing d . i . pipes ( push on joints pressure pipes of di of following class and diameters confirming to the is specification inclusive cost of jointing materials ( rubber gasket of epdm quality ) excluding gst levied by goi & gom in all respect including third party inspection charges of tpi agency approved by mjp including transit insurance , railway freight , unloading from railway wagon , loading into truck , transportation to departmental store / site of work , unloading , stacking etc . complete as directed by engineer incharge . ( is-1536:2001 for pipes & is-158:1969 & is-12820:1989 or latest edition / revision with amendments for rubber gasket . ) ( is:8329:2000 latest version ) di k-7 grade mjp / dsr / 2018-2019 / page no . 60 i . no . 3 , 100 mm , 150 mm , 200 mm , item no . 8 lowering , laying and jointing with sbr rubber gaskets c . i . & d . i . pipes of various classes with ci / ms specials of following diameters in proper position , grade and alignment as directed by engineer-in-charge including conveyance of material from stores to site of work , excluding cost of jointing materials and rubber rings , including labour , etc complete . note: only sbr rubber gaskets to be used as per is- 5382 / 12820 mjp / dsr / 2018-20197 / page no . 58 i . no . 2 ( a ) , 100 mm , 150 mm , 200 mm , 250 mm , item no . 9 providing and supplying c . i . detachable joints suitable for a . c . pressure pipes manufactured as per is- 1538 / 1993 standards of following class and dimeter including cost of insurance , railway freight , inspection charges , unloading from railway wagon , loading into truck , transporting to departmental store , unloading , stacking and cost of rubber rings , nut bolts , excluding gst levied by goi & gom in all respect etc . complete . mjp / dsr / 2018-2019 / page no . 69 i . no . 13 , class 10 / 15 , 80 mm , 100 mm , 150 mm , 200 mm , 250 mm , 300 mm , item no . 10 providing and supplying i . s . i . mark rubber gasket suitable for c . i . or d . i . pipe of all class for tyton joints including inspection charges , transportation upto departmental stores excluding gst levied by goi & gom in all respect etc . complete . mjp / dsr / 2018-2019 / page no . 228 i . no . 21 ( a ) , 100mm , 150mm , 200mm , 250mm , 300mm , item no . 11 supply of c . i . mechanical compression collar coupling suitable for c . i spun pipes ( as per is-1536 / 2001 ) and complete with sealing rubber gasket of sbr , c . i . follower glands and m . s . nut bolts . the whole assembly should be mechanically and hydraulically tested to the provisions as laid down in is; 1538 / 1993 mjp / dsr / 2018-2019 / page no . 234 i . no . 2 , 200mm , 250mm , 300mm , item no . 12 checking and repairing private water connection and reconnecting the same disconnection of unauthorise private connection etc complete , item no . 13 dissconnection of unauthourised private water connection etc comp , item no . 14 making cross connection to existing distribution main of any type including excavation , breaking and removing existing pipes , lowering , laying of specials and pipes in their position , refilling , closing the water supply in that area , dewatering and restarting the water supply , etc . complete as directed by engineer-in-charge for following diameters of existing pipeline , irrespective of diameter of branch line . ( the number of joints involved will be paid separately depending upon the nature of joints and required pipes , valves and specials will be supplied free of cost at stores ) mjp / dsr / 2018-2019 / page no . 47 i . no . 10 , 100 mm , 150 mm , 200 mm , 250 mm , 300 mm , item no . 15 providing double flanged sluice valves confirming to is- 2906 / 14846 including worm gear arrangements as per test pressure , stainless steel spindle , caps , including inspection charges , transportation upto departmental store , unloading , stacking excluding gst levied by goi & gom in all respect etc . complete . pn-1 . 0 ( without by

INR 600 /-

INR 20680.0 /-

INR 20.68 Lakhs /-

Name of Work: M and R to water supply distribution system at Silk Mill Colony, Hamalwada, Shahsokta Colony, Sadat Nagar, Rahul Nagar, Itkheda, Sai Vrundawan Colony, Kanchanwadi, Nakshtrwadi, Satara, Deolai in Zone No. 8
	Sl. No.	Item Description	Item Code / Make	Quantity	Units
1	1	Item No. 1 Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc comp. Lift 0 to 1.50 M MJP/DSR/2018-19/Page no.34 I.No.1	1	1100	Cum
2	2	Item No. 2 Excavation for foundation / pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc comp. Lift 0 to 1.50 M MJP/DSR/2018-2019/ Page No.34 I.No.3	2	800	Cum
3	3	Item No. 3 Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road by all means including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc comp. Lift 0 to 1.50 M MJP/DSR/2018-2019/ Page No.34 I.No.5	3	300	Cum
4	4	Item No. 4 Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc comp. Lift 0 to 1.50 M MJP/DSR/2018-2019/ Page No.35 I.No.7	4	100	Cum
5	5	Item No. 5 Providing and Supplying Asbestos Cement Pressure Pipes manufactured and tested as per ISO-160 standards of following class and diameter in standard lengths including cost of all taxes (Central and local), insurance, railway freight, inspection charges, unloading from railway wagon, loading into truck, transporting to departmental store/site, unloading, stacking etc. complete MJP/DSR/2012-2013/Page no.57. I.no. 1	5	0.001	Nos
6	6	A) Class 15 ( Test Pressure 1.5 Mpa)	6	0.001	Nos
7	7	80mm	7	10	Rmt
8	8	100mm	8	60	Rmt
9	9	150mm	9	60	Rmt
10	10	200mm	10	20	Rmt
11	11	250mm	11	5	Rmt
12	12	300mm	12	5	Rmt
13	13	Item No. 6 Lowering, laying and jointing with CID joints, A.C. pressure pipes and CI or MS specials of following class and diameters including conveyance from stores to site of works, cost of labour and material, giving satisfactory hydraulic testing, etc. as per ISI code, etc. complete but excluding cost of C.I.D. joints, nut bolts, rubber rings. MJP/DSR/2012-2013/ P.No.59 I.no. 4 (A)	13	0.001	Nos
14	14	A) Class 15 ( Test Pressure 1.5 Mpa)	14	0.001	Nos
15	15	80mm	15	10	Rmt
16	16	100mm	16	60	Rmt
17	17	150mm	17	60	Rmt
18	18	200mm	18	20	Rmt
19	19	250mm	19	5	Rmt
20	20	300mm	20	5	Rmt
21	22	Item No. 7 Providing D.I.Pipes ( push on joints pressure pipes of DI of following class and diameters confirming to the IS specification inclusive cost of jointing materials (rubber gasket of EPDM quality) excluding GST levied by GoI & GoM in all respect including Third Party Inspection charges of TPI agency approved by MJP including transit insurance, Railway freight, unloading from railway wagon, loading into truck, transportation to departmental store/site of work, unloading, stacking etc. complete as directed by engineer incharge. (IS-1536:2001 for Pipes & IS-158:1969 & IS-12820:1989 or latest edition/revision with amendments for rubber gasket.) (IS:8329:2000 latest version) DI K-7 grade MJP/DSR/2018-2019/Page no.60 I.No.3	22	0.001	Nos
22	23	100 mm	23	5	Rmt
23	24	150 mm	24	5	Rmt
24	25	200 mm	25	5	Rmt
25	26	Item No. 8 Lowering, laying and jointing with SBR rubber gaskets C.I.& D.I. pipes of various classes with CI / MS specials of following diameters in proper position, grade and alignment as directed by Engineer-in-charge including conveyance of material from stores to site of work, excluding cost of jointing materials and rubber rings, including labour, etc complete. Note: Only SBR rubber gaskets to be used as per IS- 5382 / 12820 MJP/DSR/2018-20197/Page no.58 I.No.2 (a)	26	0.001	Nos
26	27	100 mm	27	5	Rmt
27	28	150 mm	28	5	Rmt
28	29	200 mm	29	5	Rmt
29	30	250 mm	30	5	Rmt
30	31	Item No. 9 Providing and supplying C.I.detachable joints suitable for A.C. pressure pipes manufactured as per IS- 1538 / 1993 standards of following class and dimeter including cost of insurance, railway freight, inspection charges, unloading from railway wagon, loading into truck, transporting to departmental store, unloading, stacking and cost of rubber rings, nut bolts, excluding GST levied by GOI & GOM in all respect etc. complete. MJP/DSR/2018-2019/Page no. 69 I.no.13	31	0.001	Nos
31	32	Class 10 /15	32	0.001	Nos
32	33	80 mm	33	20	No
33	34	100 mm	34	160	No
34	35	150 mm	35	130	No
35	36	200 mm	36	30	No
36	37	250 mm	37	10	No
37	38	300 mm	38	10	No
38	39	Item No. 10 Providing and supplying I.S.I. mark rubber gasket suitable for C.I. or D.I. pipe of all class for tyton joints including inspection charges, transportation upto departmental stores excluding GST levied by GOI & GOM in all respect etc. complete. MJP/DSR/2018-2019/Page no.228 I.No.21 (A)	39	0.001	Nos
39	40	100mm	40	5	No
40	41	150mm	41	5	No
41	42	200mm	42	5	No
42	43	250mm	43	5	No
43	44	300mm	44	5	No
44	45	Item No. 11 Supply of C.I. Mechanical Compression collar coupling suitable for C.I spun pipes ( as per IS-1536 /2001) and complete with sealing rubber gasket of SBR, C.I. follower glands and M.S. nut bolts. The whole assembly should be mechanically and hydraulically tested to the provisions as laid down in IS; 1538 / 1993 MJP/DSR/2018-2019/Page no.234 I.No.2	45	0.001	Nos
45	46	200mm	46	1	No
46	47	250mm	47	1	No
47	48	300mm	48	1	No
48	49	Item No. 12 Checking and Repairing Private Water connection and reconnecting the same disconnection of unauthorise private connection etc complete	49	200	No
49	50	Item No. 13 Dissconnection of unauthourised private water connection etc comp	50	200	No
50	51	Item No. 14 Making cross connection to existing distribution main of any type including excavation, breaking and removing existing pipes, lowering, laying of specials and pipes in their position, refilling, closing the water supply in that area, dewatering and restarting the water supply, etc. complete as directed by Engineer-in-charge for following diameters of existing pipeline, irrespective of diameter of branch line. ( The number of joints involved will be paid separately depending upon the nature of joints and required pipes, valves and specials will be supplied free of cost at stores) MJP/DSR/2018-2019/Page no.47 I.No.10	51	0.001	Nos
51	52	100 mm	52	2	No
52	53	150 mm	53	2	No
53	54	200 mm	54	1	No
54	55	250 mm	55	1	No
55	56	300 mm	56	1	No
56	57	Item No. 15 Providing double flanged Sluice Valves confirming to IS- 2906 / 14846 including worm gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. PN-1.0 ( without bypass arrangement) MJP/DSR/2018-2019/Page no.208 I.No.2 (A)	57	0.001	Nos
57	58	65mm	58	2	No
58	59	80 mm	59	2	No
59	60	100 mm	60	5	No
60	61	150 mm	61	4	No
61	62	200 mm	62	1	No
62	63	250 mm	63	1	No
63	64	300 mm	64	1	No
64	65	Item No. 16 Lowering laying and jointing in position following C.I. D/F Reflux Valves, Butterfly Valves and Sluice Valves including cost of all labour, jointing material, including nut bolts and giving satisfactory hydraulic testing, etc complete. Sluice Valves MJP/DSR/2018-2019/Page no.214 I.No.4	65	0.001	Nos
65	66	65mm	66	2	No
66	67	80 mm	67	2	No
67	68	100 mm	68	5	No
68	69	150 mm	69	4	No
69	70	200 mm	70	1	No
70	71	250 mm	71	1	No
71	72	300 mm	72	1	No
72	73	Item No. 17 Removing existing cross connection and remaking the same etc complete (70% Rate of making cross connection.) MJP/DSR/2018-2019/Page no.47. I.No.10	73	0.001	Nos
73	74	80 mm	74	5	No
74	75	100 mm	75	20	No
75	76	150 mm	76	20	No
76	77	200 mm	77	10	No
77	78	250 mm	78	5	No
78	79	300 mm	79	5	No
79	80	Item No. 18 Removing and refixing the half body of Sluice Valves including excavation, refilling, cost of rubber packing, nut bolts, with gate, gland rope, repair by welding etc complete (70 % Rate of laying Sluice Valves ) MJP/DSR/2018-2019/ Page no.131 I.No.4	80	0.001	Nos
80	81	80 mm	81	10	No
81	82	100 mm	82	70	No
82	83	150 mm	83	70	No
83	84	200 mm	84	25	No
84	85	250 mm	85	5	No
85	86	300 mm	86	20	No
86	87	Item No. 19 Providing and supplying S.S. spindle rod as per standard specifications and suitable for Sluice Valves etc complete. (As Per Market rate )	87	0.001	Nos
87	88	80mm	88	5	No
88	89	100mm	89	10	No
89	90	150mm	90	10	No
90	91	200mm	91	5	No
91	92	250mm	92	2	No
92	93	300mm	93	2	No
93	94	Item No. 20 Providing and supplying Gun metal check nut of following diameter of Sluice Valves as per standard specifications, etc. complete	94	0.001	Nos
94	95	80mm	95	5	No
95	96	100mm	96	10	No
96	97	150mm	97	10	No
97	98	200mm	98	5	No
98	99	250mm	99	2	No
99	100	300mm	100	2	No
100	101	Item No. 21 Repair the gate by welding to make it in orignal position etc comp	101	0.001	Nos
101	102	100mm	102	5	No
102	103	300mm	103	5	No
103	104	Item No. 22 Providing and Supplying M.S. clamp for pipes of following diameters etc comp. (As Per Market rate )	104	0.001	Nos
104	105	80 mm	105	5	No
105	106	100 mm	106	20	No
106	107	150 mm	107	20	No
107	108	200 mm	108	10	No
108	109	250 mm	109	5	No
109	110	300 mm	110	5	No
110	111	Item No. 23 Providing and supplying ISI standard CI flanged / S & S specials excluding GST levied by GOI & GOM in all respect including railway freight, insurance, unloading from railway wagon, loading into truk, transport to departmental stores, unloading, stacking, etc. complete. C) Plain ended/plain ended branch flanged specials - i) 80 mm dia to 300 mm dia MJP/DSR/2018-2019/ Page no.63, I.No.6 (C)	111	200	Kg
111	112	Item No. 24 Providing ISI mark G.I. pipe of following class and diameter excluding GST levied by GOI & GOM in all respect including inspection charges, transportation to stores, etc. complete as per IS-1239 / 2004 Medium Class. MJP/DSR/2018-2019/Page no.84, I.No.1, (b)	112	0.001	Nos
112	113	50 mm	113	10	Rmt
113	114	80 mm	114	10	Rmt
114	115	Item No. 25 Lowering, laying and jointing G I pipes and specials of following class and diameter including conveyance from stores to site of works, all labour etc. complete, either underground or in vertical position, as directed by Engineer-in-charge. Medium Class. MJP/DSR/2018-2019/Page no.87, I.No.2 ( b )	115	0.001	Nos
115	116	50 mm	116	10	Rmt
116	117	80 mm	117	10	Rmt
117	118	Item No. 26 Dismantlling dead pipe line of MS/RCC/CI/PSC and GI /AC/ PVC/SW/HDPE pipe including cost of necessary excavation & refilling of trenches, breaking the joints, lifting the pipes and stacking to the place as directed by Engineer-in-charge with al leads and lifts including cleaning the surface, etc complete. A) MS/RCC/CI/PSC/DI pipes. MJP/DSR/2018-2019/Page no.48 I.no.11 (A)	118	0.001	Nos
118	119	100 mm	119	10	Rmt
119	120	150 mm	120	10	Rmt
120	121	Item No. 27 Dewatering the excavated trenches and pools of water in the pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete. MJP/DSR/2018-2019/Page no.36 I.no.14	121	50	HP/Hr
121	122	Item No. 28 Providing & laying in situ cement concrete M-15/1:2:4 of trap/granite/ quartzite/ gness metal for foundation and bedding including dewatering, compacting and curing etc. complete. PWD/DSR/2015-16/P.NO 287 I no 29	122	10	Cum
122	123	Item No. 29 Providing and Supplying in standard lengths ISI mark rigid unplasticised PVC pipes excluding GST levied by GoI & GoM in all respect, MJP/DSR/2018-2019/Page no 75 I no 1(B)	123	0.001	Nos
123	124	63mm	124	40	Rmt
124	125	75mm	125	40	Rmt
125	126	90mm	126	50	Rmt
126	127	140mm	127	50	Rmt
127	128	Item No. 30 Lowering laying and jointing PVC pipes and specials of following class and diameter etc complete (with solvent joint / ring fit joint) MJP/DSR/2018-2019Page n0 80 I no 3(B)	128	0.001	Nos
128	129	63mm	129	40	Rmt
129	130	75mm	130	40	Rmt
130	131	90mm	131	50	Rmt
131	132	140mm	132	50	Rmt
132	133	Item No. 31 Add 10% of cost of pipes shall be considered for cost of PVC specials for only. MJP/DSR/Page no 79 I no 1	133	1	Lamsum
133	134	Item No. 32 Providing and making lead clauked joint with molten lead to cast iron pipes and or specials of all classes and fitting of lead and all joints material etc comp.MJP/DSR/2018-2019/Page no.62 I.no.4	134	0.001	Nos
134	135	250mm	135	2	Joint
135	136	300mm	136	2	Joint
136	137	Item No. 33 Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc.complete. MJP/DSR/2018-2019/Page no.37 I.No.15	137	2300	Cum