Smp - Nilakkal - Infrastructure For Police Personnel And For Ksrtc Personnel
Tender Value
12.41 Crore
Estimated cost
Bid Submission
26 Sep 2019
0 days left
EMD
5 Lakhs
Bank guarantee accepted
Document Fee
15000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nilakkal → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Smp - Nilakkal - Infrastructure For Police Personnel And For Ksrtc Personnel
BOQ
| Name of work: SMP - Nilakkal - Infrastructure for Police Personnel and for KSRTC Personnel | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Clearing Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30cm measured at a height of 1m above ground level and removal of rubbish outside the site and to unobjectionable place | 1000 | Sq.m | |
| 2 | 2 | Earth Work Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan)including getting out and disposal of excavated earth lead upto 50 m and lift upto1.5 m, as directed by Engineer-in-charge. All kinds of soil | 123 | Cu.m | |
| 3 | 3 | Extra for every additional lift of 1.5 m or part thereof in excavation /\nbanking excavated or stacked materials.\n2.26.1 All kinds of soil | 4 | Cu.m | |
| 4 | 4 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. 40% of Earth work excavation | 50 | Cu.m | |
| 5 | 5 | Plain Cement Concrete Providing and laying in position cement concrete of specified grade excluding\nthe cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm\nnominal size) | 48 | Cu.m | |
| 6 | 6 | Providing and laying damp-proof course 50mm thick with cement concrete\n1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm\nnominal size). | 46 | Sq.m | |
| 7 | 7 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. | 368 | per 50 kg cement | |
| 8 | 8 | Reinforced Cement Concrete work Centering and Shuttering Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete | 83 | Sq.m | |
| 9 | 9 | Centering and shuttering including strutting, propping etc. and removal of form for :Lintels, beams, plinth beams, girders, bressumers and cantilevers | 274 | Sq.m | |
| 10 | 10 | Centering and shuttering including strutting, propping etc. and removal of form for :Suspended floors, roofs, landings balconies and access platform | 55 | Sq.m | |
| 11 | 11 | Centering and shuttering including strutting, propping etc. and removal of form : Columns, Pillars, Piers, Abutments, Posts and Struts | 33 | Sq.m | |
| 12 | 12 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone\n aggregate 20 mm nominal size). | 30 | Cu.m | |
| 13 | 13 | Reinforced cement concrete work in beams, suspended floors, roofs having slope\nup to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills,\nstaircases and spiral stair cases above plinth level up to floor five level, excluding\nthe cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement\n: 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). | 40 | Cu.m | |
| 14 | 14 | Steel reinforcement for R.C.C. work including straightening, cutting, bending,\nplacing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. | 7300 | Kg | |
| 15 | 15 | Brick/Mansonry, Partition Work Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 (1 cement : 6 coarse sand) etc complete | 90 | Cu.m | |
| 16 | 16 | Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete.75 mm overall thickness partition with 12.5 mm thick double skin fire rated board conforming to IS: 2095: part I | 615 | Sq.m | |
| 17 | 17 | Wood, Upvc and PVC Work Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc | 329 | Kg | |
| 18 | 18 | Providing and fixing glazing in aluminium /uPVC door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness | 17 | Sq.m | |
| 19 | 19 | Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water\netc. After fixing frame the gap between frame and adjacent finished wall shall\nbe filled with weather proof silicon sealent over backer rod of required size and\nof approved quality, all complete as per approved drawing & direction of\nEngineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent\nshall be paid separately)\nNote: For uPVC frame and sash extruded profiles minus 5% tolerance in\ndimension i.e. in depth & width of profile shall be acceptable . b)Three track three panels sliding window with fly proof S.S wire mesh (Two nos.\nglazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash\n46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 1.75 sqm). | 17 | Sq.m | |
| 20 | 20 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos. of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer-in-Charge. | 100 | M | |
| 21 | 21 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture . M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing.30 mm thick plain PVC door shutters | 33 | Sq.m | |
| 22 | 22 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating\nnot less than grade AC 10 as per IS : 1868 ) transparent or dyed to required\ncolour or shade, with necessary screws etc. complete : 150x10 mm | 44 | Nos | |
| 23 | 23 | Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete.75x65x4 mm (heavy type) | 176 | Nos | |
| 24 | 24 | Providing and fixing bright finished brass hard drawn hooks and eyes : 300 mm | 16 | Nos | |
| 25 | 25 | Providing and fixing bright finished brass hard drawn hooks and eyes : 100 mm | 4 | Nos | |
| 26 | 26 | Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry\nsurface backing including drilling necessary holes and the cost of bolt etc\ncomplete. Wedge expansion type Fastener with threaded dia 12 mm | 144 | Nos | |
| 27 | 27 | Flooring Providing and laying vitrified floor tiles in different sizes (thickness to be\nspecified by the manufacturer) with water absorption less than 0.08% and\nconforming to IS: 15622, of approved make, in all colours and shades, laid on\n20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey\ncement slurry @ 3.3 kg/ sqm including grouting the joints with white cement\nand matching pigments etc., complete. Size of Tile 600x600 mm | 320 | Sq.m | |
| 28 | 28 | Providing and laying Vitrified tiles in different sizes (thickness to be specified\nby manufacturer), with water absorption less than 0.08 % and conforming to\nI.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps,\nover 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing\nwith grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white\ncement & matching pigments etc. complete. Size of Tile 600x600 mm | 34 | Sq.m | |
| 29 | 29 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete. | 30 | Sq.m | |
| 30 | 30 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be\nspecified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | 146 | Sq.m | |
| 31 | 31 | Roofing Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat ofapproved steel primer all complete. | 13435 | Kg | |
| 32 | 32 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including\ncutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 2185 | Kg | |
| 33 | 33 | say Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18\nmicrons. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping\nscrews of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape\nwherever required. | 480 | Sq.m | |
| 34 | 34 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating\n120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :\n Ridges plain (500 - 600mm) | 50 | M | |
| 35 | 35 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592\nType A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,\n(i) Single socketed pipes. 110 mm diameter | 18 | M | |
| 36 | 36 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50 x 50 x 50 mm hardwood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm dia | 4 | Nos | |
| 37 | 37 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion (a) Bend 87.5o:110mm | 4 | Nos | |
| 38 | 38 | b)Shoe(plain):110mm | 4 | Nos | |
| 39 | 39 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. a)110mm | 4 | Nos | |
| 40 | 40 | Finishing 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) | 801 | Sq.m | |
| 41 | 41 | 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:3 (1 cement: 3 fine sand) | 76 | Sq.m | |
| 42 | 42 | Providing and applying white cement based putty of average thickness 1 mm,\nof approved brand and manufacturer, over the plastered wall surface to prepare\nthe surface even and smooth complete. | 801 | Sq.m | |
| 43 | 43 | Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces :\nTwo coats | 801 | Sq.m | |
| 44 | 44 | Painting with synthetic enamel paint of approved brand and manufacture to\ngive an even shade : Two or more coats on new work | 250 | Sq.m | |
| 45 | 45 | Plumbing Works Sanitary installation Providing and fixing white vitreous china pedestal type water closet\n(European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets,\n40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid | 8 | Nos | |
| 46 | 46 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps\netc. including moulding, rubbing and polishing of cut edges etc. complete. | 8 | Nos | |
| 47 | 47 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever\nrequired : Range of three urinal basins with 10litre white P.V.C. automatic flushing cistern | 12 | Nos | |
| 48 | 48 | Providing and fixing C.P. brass bib cock of approved quality conforming to\nIS:8931 : 15 mm nominal bore | 8 | Nos | |
| 49 | 49 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width78 mm and effective height of 88 mm, weighing not less than 190 gms. | 8 | Nos | |
| 50 | 50 | Providing and fixing PTMT liquid soap container 109 mm wide, 125mm high and 112 mm distance from wall of standard shape withbracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. | 8 | Nos | |
| 51 | 51 | Supplying, laying and jointing hard PVC pipes with PVC specials such as tees, bends, door bend, door tee, elbow, unions, etc. with clamp testing the lines rectifying any leakages or defects etc. complete as directed by the Engineer in charge for soil, waste, rain water, drains, vent pipe, etc. concealed or open at all levels including cost conveyance of all materials , labour charges, sundries etc. complete for concealed work as directed by the Engineer in charge. 110mm (6kg/cm2) | 75 | M | |
| 52 | 52 | 75mm (6kg/cm2) | 55 | M | |
| 53 | 53 | 50mm (6kg/cm2) | 50 | M | |
| 54 | 54 | Providing and fixing PVC pipes including fixing the pipe with clamps/ clips at 1.00 m\nspacing. This includes jointing of pipes with one step PVC solvent cement and testing\nof joints complete as per direction of Engineer-in-Charge \n-External work - Exposed on wall 110mm (6kg/cm2) | 50 | M | |
| 55 | 55 | 75mm (6kg/cm2) | 25 | M | |
| 56 | 56 | Water Supply Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having\nthermal stability for hot & cold water supply, including all CPVC plain & brass\nthreaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes\njointing of pipes & fittings with one step CPVC solvent cement and the cost of\ncutting chases and making good the same including testing of joints complete\nas per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes | 100 | M | |
| 57 | 57 | 25 mm nominal outer dia Pipes | 25 | M | |
| 58 | 58 | 32 mm nominal outer dia Pipes | 25 | M | |
| 59 | 59 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having\nthermal stability for hot & cold water supply including all CPVC plain & brass\nthreaded fittings This includes jointing of pipes & fittings with one step CPVC\nsolvent cement, trenching, refilling & testing of joints complete as per direction\nof Engineer in Charge. External work. 40 mm nominal outer dia Pipes | 50 | M | |
| 60 | 60 | 50 mm nominal outer dia Pipes | 50 | M | |
| 61 | 61 | 62.50 mm nominal inner dia Pipes | 25 | M | |
| 62 | 62 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having\nthermal stability for hot & cold water supply, including all CPVC plain & brass\nthreaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This\nincludes jointing of pipes & fittings with one step CPVC solvent cement and\ntesting of joints complete as per direction of Engineer in Charge.\nInternal work - Exposed on wall. 20 mm nominal outer dia Pipes | 50 | M | |
| 63 | 63 | 25 mm nominal outer dia Pipes | 50 | M | |
| 64 | 64 | 32 mm nominal outer dia Pipes | 50 | M | |
| 65 | 65 | 40 mm nominal outer dia Pipes | 25 | M | |
| 66 | 66 | 50 mm nominal outer dia Pipes | 25 | M | |
| 67 | 67 | 62.50 mm nominal inner dia Pipes | 25 | M | |
| 68 | 68 | 75 mm nominal inner dia Pipes | 25 | M | |
| 69 | 69 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality\n(screwed end) : 20 mm nominal bore | 2 | Nos | |
| 70 | 70 | 25 mm nominal bore | 2 | Nos | |
| 71 | 71 | 32 mm nominal bore. | 2 | Nos | |
| 72 | 72 | 40 mm nominal bore | 2 | Nos | |
| 73 | 73 | 50 mm nominal bore | 2 | Nos | |
| 74 | 74 | 65 mm nominal bore | 2 | Nos | |
| 75 | 75 | 80 mm nominal bore | 2 | Nos | |
| 76 | 76 | Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts,\nrubber insertions etc. (the tail pieces if required will be paid separately) : Class II | 5 | Nos | |
| 77 | 77 | Providing and fixing gun metal non- return valve of approved quality (screwed\nend) : 40 mm nominal bore Horizontal | 4 | Nos | |
| 78 | 78 | 50 mm nominal bore\n Horizontal | 1 | No | |
| 79 | 79 | 65 mm nominal bore\n Horizontal | 4 | Nos | |
| 80 | 80 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked,\nwith cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow\npipes but without fittings and the base support for tank.: Circular tank | 2000 | Ltr | |
| 81 | 81 | Supplying and fixing C.I. cover frame for manholes: 560 mm diameter C.I. cover (heavy duty) the weight of the cover to be not less than 108 kg including cost, conveyance, labour charges etc complete | 2 | Nos | |
| 82 | 82 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets:With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 etc complete | 2 | Nos | |
| 83 | 83 | APPENDIX-II Construction of Officers Dormitory Building Clearing Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30cm measured at a height of 1m above ground level and removal of rubbish outside the site and to unobjectionable place | 1000 | Sq.m | |
| 84 | 84 | Earth Work Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan)including getting out and disposal of excavated earth lead upto 50 m and lift upto1.5 m, as directed by Engineer-in-charge. All kinds of soil | 123 | M3 | |
| 85 | 85 | Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.\n2.26.1 All kinds of soil | 4 | M3 | |
| 86 | 86 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Plain Cement Concrete | 50 | Cu.m | |
| 87 | 87 | Providing and laying in position cement concrete of specified grade excluding\nthe cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm\nnominal size) | 53 | Cu.m | |
| 88 | 88 | Providing and laying damp-proof course 50mm thick with cement concrete\n1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm\nnominal size). | 46 | Sq.m | |
| 89 | 89 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. | 368 | per 50 kg cement | |
| 90 | 90 | Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete | 83 | Sq.m | |
| 91 | 91 | Centering and shuttering including strutting, propping etc. and removal of form for :Lintels, beams, plinth beams, girders, bressumers and cantilevers | 291 | Sq.m | |
| 92 | 92 | Centering and shuttering including strutting, propping etc. and removal of form for :Suspended floors, roofs, landings balconies and access platform | 55 | Sq.m | |
| 93 | 93 | Centering and shuttering including strutting, propping etc. and removal of form : Columns, Pillars, Piers, Abutments, Posts and Struts | 33 | Sq.m | |
| 94 | 94 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone\n aggregate 20 mm nominal size).\n | 30 | Cu.m | |
| 95 | 95 | Reinforced cement concrete work in beams, suspended floors, roofs having slope\nup to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills,\nstaircases and spiral stair cases above plinth level up to floor five level, excluding\nthe cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement\n: 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). | 53 | Cu.m | |
| 96 | 96 | Steel reinforcement for R.C.C. work including straightening, cutting, bending,\nplacing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. | 8670 | Kg | |
| 97 | 97 | Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 (1 cement : 6 coarse sand) etc complete | 90 | Cu.m | |
| 98 | 98 | Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete.75 mm overall thickness partition with 12.5 mm thick double skin fire rated board conforming to IS: 2095: part I | 725 | Sq.m | |
| 99 | 99 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc | 329 | Kg | |
| 100 | 100 | Providing and fixing glazing in aluminium /uPVC door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness | 17 | Sq.m | |
| 101 | 101 | Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water\netc. After fixing frame the gap between frame and adjacent finished wall shall\nbe filled with weather proof silicon sealent over backer rod of required size and\nof approved quality, all complete as per approved drawing & direction of\nEngineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent\nshall be paid separately)\nNote: For uPVC frame and sash extruded profiles minus 5% tolerance in\ndimension i.e. in depth & width of profile shall be acceptable . b)Three track three panels sliding window with fly proof S.S wire mesh (Two nos.\nglazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash\n46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 1.75 sqm). | 17 | Sq.m | |
| 102 | 102 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos. of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer-in-Charge. | 100 | M | |
| 103 | 103 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture . M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing.30 mm thick plain PVC door shutters | 33 | Sq.m | |
| 104 | 104 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating\nnot less than grade AC 10 as per IS : 1868 ) transparent or dyed to required\ncolour or shade, with necessary screws etc. complete : 150x10 mm | 44 | Nos | |
| 105 | 105 | Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete.75x65x4 mm (heavy type) | 176 | Nos | |
| 106 | 106 | Providing and fixing bright finished brass hard drawn hooks and eyes : 300 mm | 16 | Nos | |
| 107 | 107 | Providing and fixing bright finished brass hard drawn hooks and eyes : 100 mm | 4 | Nos | |
| 108 | 108 | Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry\nsurface backing including drilling necessary holes and the cost of bolt etc\ncomplete. Wedge expansion type Fastener with threaded dia 12 mm | 144 | Nos | |
| 109 | 109 | Providing and laying vitrified floor tiles in different sizes (thickness to be\nspecified by the manufacturer) with water absorption less than 0.08% and\nconforming to IS: 15622, of approved make, in all colours and shades, laid on\n20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey\ncement slurry @ 3.3 kg/ sqm including grouting the joints with white cement\nand matching pigments etc., complete. Size of Tile 600x600 mm | 320 | Sq.m | |
| 110 | 110 | Providing and laying Vitrified tiles in different sizes (thickness to be specified\nby manufacturer), with water absorption less than 0.08 % and conforming to\nI.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps,\nover 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing\nwith grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white\ncement & matching pigments etc. complete. Size of Tile 600x600 mm | 34 | Sq.m | |
| 111 | 111 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete. | 30 | Sq.m | |
| 112 | 112 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | 146 | Sq.m | |
| 113 | 113 | Roofing Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat ofapproved steel primer all complete. | 13445 | Kg | |
| 114 | 114 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including\ncutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 2185 | Kg | |
| 115 | 115 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18\nmicrons. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping\nscrews of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape\nwherever required. | 480 | Sq.m | |
| 116 | 116 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating\n120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :\n Ridges plain (500 - 600mm) | 50 | M | |
| 117 | 117 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating\n120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :\n Ridges plain (500 - 600mm) | 18 | M | |
| 118 | 118 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592\nType A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,\n(i) Single socketed pipes. 110 mm diameter | 4 | Nos | |
| 119 | 119 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion a)Bend 87.5o:110mm | 4 | Nos | |
| 120 | 120 | b)Shoe(plain):110mm | 4 | Nos | |
| 121 | 121 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. a)110mm | 4 | Nos | |
| 122 | 122 | Finishing 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) | 801 | Sq.m | |
| 123 | 123 | 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:3 (1 cement: 3 fine sand) | 76 | Sq.m | |
| 124 | 124 | Providing and applying white cement based putty of average thickness 1 mm,\nof approved brand and manufacturer, over the plastered wall surface to prepare\nthe surface even and smooth complete. | 801 | Sq.m | |
| 125 | 125 | Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces :\nTwo coats | 801 | Sq.m | |
| 126 | 126 | Painting with synthetic enamel paint of approved brand and manufacture to\ngive an even shade : Two or more coats on new work | 250 | Sq.m | |
| 127 | 127 | Plumbing Works Sanitary installation Providing and fixing white vitreous china pedestal type water closet\n(European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets,\n40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid | 8 | Nos | |
| 128 | 128 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps\netc. including moulding, rubbing and polishing of cut edges etc. complete. | 8 | Nos | |
| 129 | 129 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever\nrequired : Range of three urinal basins with 10litre white P.V.C. automatic flushing cistern | 12 | Nos | |
| 130 | 130 | Providing and fixing C.P. brass bib cock of approved quality conforming to\nIS:8931 : 15 mm nominal bore | 8 | Nos | |
| 131 | 131 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width78 mm and effective height of 88 mm, weighing not less than 190 gms. | 8 | Nos | |
| 132 | 132 | Providing and fixing PTMT liquid soap container 109 mm wide, 125mm high and 112 mm distance from wall of standard shape withbracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. | 8 | Nos | |
| 133 | 133 | Supplying, laying and jointing hard PVC pipes with PVC specials such as tees, bends, door bend, door tee, elbow, unions, etc. with clamp testing the lines rectifying any leakages or defects etc. complete as directed by the Engineer in charge for soil, waste, rain water, drains, vent pipe, etc. concealed or open at all levels including cost conveyance of all materials , labour charges, sundries etc. complete for concealed work as directed by the Engineer in charge. 110mm (6kg/cm2) | 75 | M | |
| 134 | 134 | 75mm (6kg/cm2) | 55 | M | |
| 135 | 135 | 50mm (6kg/cm2) | 50 | M | |
| 136 | 136 | Providing and fixing PVC pipes including fixing the pipe with clamps/ clips at 1.00 m\nspacing. This includes jointing of pipes with one step PVC solvent cement and testing\nof joints complete as per direction of Engineer-in-Charge \n-External work - Exposed on wall 110mm (6kg/cm2) | 50 | M | |
| 137 | 137 | 75mm (6kg/cm2) | 25 | M | |
| 138 | 138 | Water Supply Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having\nthermal stability for hot & cold water supply, including all CPVC plain & brass\nthreaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes\njointing of pipes & fittings with one step CPVC solvent cement and the cost of\ncutting chases and making good the same including testing of joints complete\nas per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes | 100 | M | |
| 139 | 139 | 25 mm nominal outer dia Pipes | 25 | M | |
| 140 | 140 | 32 mm nominal outer dia Pipes | 25 | M | |
| 141 | 141 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having\nthermal stability for hot & cold water supply including all CPVC plain & brass\nthreaded fittings This includes jointing of pipes & fittings with one step CPVC\nsolvent cement, trenching, refilling & testing of joints complete as per direction\nof Engineer in Charge. External work 40 mm nominal outer dia Pipes | 50 | M | |
| 142 | 142 | 50 mm nominal outer dia Pipes | 50 | M | |
| 143 | 143 | 62.50 mm nominal inner dia Pipes | 25 | M | |
| 144 | 144 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having\nthermal stability for hot & cold water supply, including all CPVC plain & brass\nthreaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This\nincludes jointing of pipes & fittings with one step CPVC solvent cement and\ntesting of joints complete as per direction of Engineer in Charge.\nInternal work - Exposed on wall. 20 mm nominal outer dia Pipes | 50 | M | |
| 145 | 145 | 25 mm nominal outer dia Pipes | 50 | M | |
| 146 | 146 | 32 mm nominal outer dia Pipes | 50 | M | |
| 147 | 147 | 40 mm nominal outer dia Pipes | 25 | M | |
| 148 | 148 | 50 mm nominal outer dia Pipes | 25 | M | |
| 149 | 149 | 62.50 mm nominal inner dia Pipes | 25 | M | |
| 150 | 150 | 75 mm nominal inner dia Pipes | 25 | M | |
| 151 | 151 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality\n(screwed end) : 20 mm nominal bore | 2 | Nos | |
| 152 | 152 | 25 mm nominal bore | 2 | Nos | |
| 153 | 153 | 32 mm nominal bore. | 2 | Nos | |
| 154 | 154 | 40 mm nominal bore | 2 | Nos | |
| 155 | 155 | 50 mm nominal bore | 2 | Nos | |
| 156 | 156 | 65 mm nominal bore | 2 | Nos | |
| 157 | 157 | 80 mm nominal bore | 2 | Nos | |
| 158 | 158 | Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts,\nrubber insertions etc. (the tail pieces if required will be paid separately) : Class II | 7 | Nos | |
| 159 | 159 | Providing and fixing gun metal non- return valve of approved quality (screwed\nend) : 40 mm nominal bore Horizontal | 4 | Nos | |
| 160 | 160 | 50 mm nominal bore\n Horizontal | 1 | No | |
| 161 | 161 | 65 mm nominal bore\n Horizontal | 4 | Nos | |
| 162 | 162 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked,\nwith cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow\npipes but without fittings and the base support for tank.: Circular tank | 2000 | Ltr | |
| 163 | 163 | Supplying and fixing C.I. cover frame for manholes: 560 mm diameter C.I. cover (heavy duty) the weight of the cover to be not less than 108 kg including cost, conveyance, labour charges etc complete | 2 | Nos | |
| 164 | 164 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets:With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 etc complete. | 2 | Nos | |
| 165 | 165 | APPENDIX -III Construction of Dormitory Building for accomodation of KSRTC at Nilakkal Clearing Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30cm measured at a height of 1m above ground level and removal of rubbish outside the site and to unobjectionable place | 1000 | Sq.m | |
| 166 | 166 | Earth Work Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan)including getting out and disposal of excavated earth lead upto 50 m and lift upto1.5 m, as directed by Engineer-in-charge. All kinds of soil | 123 | M3 | |
| 167 | 167 | Extra for every additional lift of 1.5 m or part thereof in excavation /\nbanking excavated or stacked materials.\n2.26.1 All kinds of soil | 4 | M3 | |
| 168 | 168 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. 40% of Earth work excavation | 50 | Cu.m | |
| 169 | 169 | Plain Cement Concrete Providing and laying in position cement concrete of specified grade excluding\nthe cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm\nnominal size) | 48 | Cu.m | |
| 170 | 170 | Providing and laying damp-proof course 50mm thick with cement concrete\n1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm\nnominal size). | 46 | Sq.m | |
| 171 | 171 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. | 368 | per 50 kg cement | |
| 172 | 172 | Reinforced Cement Concrete work Centering and Shuttering Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete | 83 | Sq.m | |
| 173 | 173 | Centering and shuttering including strutting, propping etc. and removal of form for :Lintels, beams, plinth beams, girders, bressumers and cantilevers | 274 | Sq.m | |
| 174 | 174 | Centering and shuttering including strutting, propping etc. and removal of form for :Suspended floors, roofs, landings balconies and access platform | 55 | Sq.m | |
| 175 | 175 | Centering and shuttering including strutting, propping etc. and removal of form : Columns, Pillars, Piers, Abutments, Posts and Struts | 33 | Sq.m | |
| 176 | 176 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone\n aggregate 20 mm nominal size).\n | 30 | Cu.m | |
| 177 | 177 | Reinforced cement concrete work in beams, suspended floors, roofs having slope\nup to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills,\nstaircases and spiral stair cases above plinth level up to floor five level, excluding\nthe cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement\n: 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). | 40 | Cu.m | |
| 178 | 178 | Steel reinforcement for R.C.C. work including straightening, cutting, bending,\nplacing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. | 7300 | Kg | |
| 179 | 179 | Brick/Mansonry, Partition Work Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 (1 cement : 6 coarse sand) etc complete | 90 | Cu.m | |
| 180 | 180 | Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete.75 mm overall thickness partition with 12.5 mm thick double skin fire rated board conforming to IS: 2095: part I | 615 | Sq.m | |
| 181 | 181 | Wood, Upvc and PVC Work Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc | 329 | Kg | |
| 182 | 182 | Providing and fixing glazing in aluminium /uPVC door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness | 17 | Sq.m | |
| 183 | 183 | Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water\netc. After fixing frame the gap between frame and adjacent finished wall shall\nbe filled with weather proof silicon sealent over backer rod of required size and\nof approved quality, all complete as per approved drawing & direction of\nEngineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent\nshall be paid separately)\nNote: For uPVC frame and sash extruded profiles minus 5% tolerance in\ndimension i.e. in depth & width of profile shall be acceptable . b)Three track three panels sliding window with fly proof S.S wire mesh (Two nos.\nglazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash\n46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 1.75 sqm). | 17 | Sq.m | |
| 184 | 184 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos. of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer-in-Charge. | 100 | M | |
| 185 | 185 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture . M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing.30 mm thick plain PVC door shutters | 33 | Sq.m | |
| 186 | 186 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating\nnot less than grade AC 10 as per IS : 1868 ) transparent or dyed to required\ncolour or shade, with necessary screws etc. complete : 150x10 mm | 44 | Nos | |
| 187 | 187 | Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete.75x65x4 mm (heavy type) | 176 | Nos | |
| 188 | 188 | Providing and fixing bright finished brass hard drawn hooks and eyes : 300 mm | 16 | Nos | |
| 189 | 189 | Providing and fixing bright finished brass hard drawn hooks and eyes : 100 mm | 4 | Nos | |
| 190 | 190 | Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry\nsurface backing including drilling necessary holes and the cost of bolt etc\ncomplete. Wedge expansion type Fastener with threaded dia 12 mm | 144 | Nos | |
| 191 | 191 | Flooring Providing and laying vitrified floor tiles in different sizes (thickness to be\nspecified by the manufacturer) with water absorption less than 0.08% and\nconforming to IS: 15622, of approved make, in all colours and shades, laid on\n20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey\ncement slurry @ 3.3 kg/ sqm including grouting the joints with white cement\nand matching pigments etc., complete. Size of Tile 600x600 mm | 320 | Sq.m | |
| 192 | 192 | Providing and laying Vitrified tiles in different sizes (thickness to be specified\nby manufacturer), with water absorption less than 0.08 % and conforming to\nI.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps,\nover 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing\nwith grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white\ncement & matching pigments etc. complete. Size of Tile 600x600 mm | 34 | Sq.m | |
| 193 | 193 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete. | 30 | Sq.m | |
| 194 | 194 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be\nspecified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | 146 | Sq.m | |
| 195 | 195 | Roofing Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat ofapproved steel primer all complete. | 13435 | Kg | |
| 196 | 196 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including\ncutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 2185 | Kg | |
| 197 | 197 | Say Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18\nmicrons. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping\nscrews of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape\nwherever required. | 480 | Sq.m | |
| 198 | 198 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating\n120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :\n Ridges plain (500 - 600mm) | 50 | M | |
| 199 | 199 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592\nType A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,\n(i) Single socketed pipes. 110 mm diameter | 18 | M | |
| 200 | 200 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50 x 50 x 50 mm hardwood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm dia | 4 | Nos | |
| 201 | 201 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion (a)Bend 87.5o:110mm | 4 | Nos | |
| 202 | 202 | b)Shoe(plain):110mm | 4 | Nos | |
| 203 | 203 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. a)110mm | 4 | Nos | |
| 204 | 204 | Finishing 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) | 801 | Sq.m | |
| 205 | 205 | 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:3 (1 cement: 3 fine sand) | 76 | Sq.m | |
| 206 | 206 | Providing and applying white cement based putty of average thickness 1 mm,\nof approved brand and manufacturer, over the plastered wall surface to prepare\nthe surface even and smooth complete. | 801 | Sq.m | |
| 207 | 207 | Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces :\nTwo coats | 801 | Sq.m | |
| 208 | 208 | Painting with synthetic enamel paint of approved brand and manufacture to\ngive an even shade : Two or more coats on new work | 250 | Sq.m | |
| 209 | 209 | Plumbing Works Sanitary installation Providing and fixing white vitreous china pedestal type water closet\n(European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets,\n40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid | 8 | Nos | |
| 210 | 210 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps\netc. including moulding, rubbing and polishing of cut edges etc. complete. | 8 | Nos | |
| 211 | 211 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever\nrequired : Range of three urinal basins with 10litre white P.V.C. automatic flushing cistern | 12 | Nos | |
| 212 | 212 | Providing and fixing C.P. brass bib cock of approved quality conforming to\nIS:8931 : 15 mm nominal bore | 8 | Nos | |
| 213 | 213 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width78 mm and effective height of 88 mm, weighing not less than 190 gms. | 8 | Nos | |
| 214 | 214 | Providing and fixing PTMT liquid soap container 109 mm wide, 125mm high and 112 mm distance from wall of standard shape withbracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. | 8 | Nos | |
| 215 | 215 | Supplying, laying and jointing hard PVC pipes with PVC specials such as tees, bends, door bend, door tee, elbow, unions, etc. with clamp testing the lines rectifying any leakages or defects etc. complete as directed by the Engineer in charge for soil, waste, rain water, drains, vent pipe, etc. concealed or open at all levels including cost conveyance of all materials , labour charges, sundries etc. complete for concealed work as directed by the Engineer in charge. 110mm (6kg/cm2) | 75 | M | |
| 216 | 216 | 75mm (6kg/cm2) | 55 | M | |
| 217 | 217 | 50mm (6kg/cm2) | 50 | M | |
| 218 | 219 | Providing and fixing PVC pipes including fixing the pipe with clamps/ clips at 1.00 m\nspacing. This includes jointing of pipes with one step PVC solvent cement and testing\nof joints complete as per direction of Engineer-in-Charge \n-External work - Exposed on wall 110mm (6kg/cm2) | 50 | M | |
| 219 | 220 | 75mm (6kg/cm2) | 25 | M | |
| 220 | 221 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having\nthermal stability for hot & cold water supply, including all CPVC plain & brass\nthreaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes\njointing of pipes & fittings with one step CPVC solvent cement and the cost of\ncutting chases and making good the same including testing of joints complete\nas per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes | 100 | M | |
| 221 | 222 | 25 mm nominal outer dia Pipes | 25 | M | |
| 222 | 223 | 32 mm nominal outer dia Pipes | 25 | M | |
| 223 | 224 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having\nthermal stability for hot & cold water supply including all CPVC plain & brass\nthreaded fittings This includes jointing of pipes & fittings with one step CPVC\nsolvent cement, trenching, refilling & testing of joints complete as per direction\nof Engineer in Charge. External work 40 mm nominal outer dia Pipes | 50 | M | |
| 224 | 225 | 50 mm nominal outer dia Pipes | 50 | M | |
| 225 | 226 | 62.50 mm nominal inner dia Pipes | 25 | M | |
| 226 | 227 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having\nthermal stability for hot & cold water supply, including all CPVC plain & brass\nthreaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This\nincludes jointing of pipes & fittings with one step CPVC solvent cement and\ntesting of joints complete as per direction of Engineer in Charge.\nInternal work - Exposed on wall 20 mm nominal outer dia Pipes | 50 | M | |
| 227 | 228 | 25 mm nominal outer dia Pipes | 50 | M | |
| 228 | 229 | 32 mm nominal outer dia Pipes | 50 | M | |
| 229 | 230 | 40 mm nominal outer dia Pipes | 25 | M | |
| 230 | 231 | 50 mm nominal outer dia Pipes | 25 | M | |
| 231 | 232 | 62.50 mm nominal inner dia Pipes | 25 | M | |
| 232 | 233 | 75 mm nominal inner dia Pipes | 25 | M | |
| 233 | 234 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality\n(screwed end) : 20 mm nominal bore | 2 | Nos | |
| 234 | 235 | 25 mm nominal bore | 2 | Nos | |
| 235 | 236 | 32 mm nominal bore. | 2 | Nos | |
| 236 | 237 | 40 mm nominal bore | 2 | Nos | |
| 237 | 238 | 50 mm nominal bore | 2 | Nos | |
| 238 | 239 | 65 mm nominal bore | 2 | Nos | |
| 239 | 240 | 80 mm nominal bore | 2 | Nos | |
| 240 | 241 | Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts,\nrubber insertions etc. (the tail pieces if required will be paid separately) : Class II | 5 | Nos | |
| 241 | 242 | Providing and fixing gun metal non- return valve of approved quality (screwed\nend) : 40 mm nominal bore Horizontal | 4 | Nos | |
| 242 | 243 | 50 mm nominal bore\n Horizontal | 1 | No | |
| 243 | 244 | 65 mm nominal bore\n Horizontal | 4 | Nos | |
| 244 | 245 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked,\nwith cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow\npipes but without fittings and the base support for tank.: Circular tank | 2000 | Ltr | |
| 245 | 246 | Supplying and fixing C.I. cover frame for manholes: 560 mm diameter C.I. cover (heavy duty) the weight of the cover to be not less than 108 kg including cost, conveyance, labour charges etc complete | 2 | Nos | |
| 246 | 247 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets:With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 etc complete. | 2 | Nos | |
| 247 | 248 | APPENDIX- IV Construction of Officers mess hall at Nilakkal Clearing Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30cm measured at a height of 1m above ground level and removal of rubbish outside the site and to unobjectionable place | 1000 | Sq.m | |
| 248 | 249 | Earth Work Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan)including getting out and disposal of excavated earth lead upto 50 m and lift upto1.5 m, as directed by Engineer-in-charge. All kinds of soil | 105 | Cu.m | |
| 249 | 250 | Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.\n2.26.1 All kinds of soil | 2 | Cu.m | |
| 250 | 251 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | 42 | Cu.m | |
| 251 | 252 | Plain Cement Concrete Providing and laying in position cement concrete of specified grade excluding\nthe cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm\nnominal size) | 47 | Cu.m | |
| 252 | 253 | Providing and laying damp-proof course 50mm thick with cement concrete\n1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm\nnominal size). | 24 | Sq.m | |
| 253 | 254 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. | 192 | per 50 Kg cement | |
| 254 | 255 | Reinforced Cement Concrete work Centering and Shuttering Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete | 80 | Sq.m | |
| 255 | 256 | Centering and shuttering including strutting, propping etc. and removal of form for :Lintels, beams, plinth beams, girders, bressumers and cantilevers | 274 | Sq.m | |
| 256 | 257 | Centering and shuttering including strutting, propping etc. and removal of form for :Suspended floors, roofs, landings balconies and access platform | 43 | Sq.m | |
| 257 | 258 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone\n aggregate 20 mm nominal size).\n | 24 | Cu.m | |
| 258 | 259 | Reinforced cement concrete work in beams, suspended floors, roofs having slope\nup to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills,\nstaircases and spiral stair cases above plinth level up to floor five level, excluding\nthe cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement\n: 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). | 38 | Cu.m | |
| 259 | 260 | Steel reinforcement for R.C.C. work including straightening, cutting, bending,\nplacing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. | 6510 | Kg | |
| 260 | 261 | Brick/Mansonry, Partition Work Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 (1 cement : 6 coarse sand) etc complete | 49 | Cu.m | |
| 261 | 262 | Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete.75 mm overall thickness partition with 12.5 mm thick double skin fire rated board conforming to IS: 2095: part I | 372 | Sq.m | |
| 262 | 263 | Wood, Upvc and PVC Work Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc | 300 | Kg | |
| 263 | 264 | Providing and fixing glazing in aluminium /uPVC door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness | 15 | Sq.m | |
| 264 | 265 | Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water\netc. After fixing frame the gap between frame and adjacent finished wall shall\nbe filled with weather proof silicon sealent over backer rod of required size and\nof approved quality, all complete as per approved drawing & direction of\nEngineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent\nshall be paid separately)\nNote: For uPVC frame and sash extruded profiles minus 5% tolerance in\ndimension i.e. in depth & width of profile shall be acceptable . b)Three track three panels sliding window with fly proof S.S wire mesh (Two nos.\nglazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash\n46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 1.75 sqm). | 15 | Sq.m | |
| 265 | 266 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast\nlugs or with dash fasteners of required dia & length ( hold fast lugs or\ndash fastener shall be paid for separately). | 0.6 | Cu.m | |
| 266 | 267 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. 35 mm thick shutters | 11 | Sq.m | |
| 267 | 268 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating\nnot less than grade AC 10 as per IS : 1868 ) transparent or dyed to required\ncolour or shade, with necessary screws etc. complete : 150x10 mm | 10 | Nos | |
| 268 | 269 | Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete.75x65x4 mm (heavy type) | 15 | Nos | |
| 269 | 270 | Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. | 30 | Nos | |
| 270 | 271 | Flooring Providing and laying vitrified floor tiles in different sizes (thickness to be\nspecified by the manufacturer) with water absorption less than 0.08% and\nconforming to IS: 15622, of approved make, in all colours and shades, laid on\n20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey\ncement slurry @ 3.3 kg/ sqm including grouting the joints with white cement\nand matching pigments etc., complete. Size of Tile 600x600 mm | 504 | Sq.m | |
| 271 | 272 | Providing and laying Vitrified tiles in different sizes (thickness to be specified\nby manufacturer), with water absorption less than 0.08 % and conforming to\nI.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps,\nover 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing\nwith grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white\ncement & matching pigments etc. complete. Size of Tile 600x600 mm | 52 | Sq.m | |
| 272 | 273 | Roofing Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat ofapproved steel primer all complete. | 13445 | Kg | |
| 273 | 274 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including\ncutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 2185 | Kg | |
| 274 | 275 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18\nmicrons. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping\nscrews of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape\nwherever required. | 605 | Sq.m | |
| 275 | 276 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating\n120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :\n Ridges plain (500 - 600mm) | 50 | M | |
| 276 | 277 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592\nType A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,\n(i) Single socketed pipes. 110 mm diameter | 18 | M | |
| 277 | 278 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50 x 50 x 50 mm hardwood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm dia | 4 | Nos | |
| 278 | 280 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion (a)Bend 87.5o:110mm | 4 | Nos | |
| 279 | 281 | b)Shoe(plain):110mm | 4 | Nos | |
| 280 | 282 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. a)110mm | 4 | Nos | |
| 281 | 283 | Finishing 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) | 240 | Sq.m | |
| 282 | 284 | 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:3 (1 cement: 3 fine sand) | 31 | Sq.m | |
| 283 | 285 | Providing and applying plaster of paris putty of 2 mm thickness over\nplastered surface to prepare the surface even and smooth complete | 240 | Sq.m | |
| 284 | 286 | Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces :\nTwo coats | 240 | Sq.m | |
| 285 | 287 | Painting with synthetic enamel paint of approved brand and manufacture to\ngive an even shade : Two or more coats on new work | 250 | Sq.m | |
| 286 | 288 | Plumbing Works Sanitary installation Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps\netc. including moulding, rubbing and polishing of cut edges etc. complete. | 10 | Nos | |
| 287 | 289 | Providing and fixing C.P. brass bib cock of approved quality conforming to\nIS:8931 : 15 mm nominal bore | 10 | Nos | |
| 288 | 290 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width78 mm and effective height of 88 mm, weighing not less than 190 gms. | 10 | Nos | |
| 289 | 291 | Providing and fixing PTMT liquid soap container 109 mm wide, 125mm high and 112 mm distance from wall of standard shape withbracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. | 10 | Nos | |
| 290 | 292 | Supplying, laying and jointing hard PVC pipes with PVC specials such as tees, bends, door bend, door tee, elbow, unions, etc. with clamp testing the lines rectifying any leakages or defects etc. complete as directed by the Engineer in charge for soil, waste, rain water, drains, vent pipe, etc. concealed or open at all levels including cost conveyance of all materials , labour charges, sundries etc. complete for concealed work as directed by the Engineer in charge. 110mm (6kg/cm2) | 75 | M | |
| 291 | 293 | 75mm (6kg/cm2) | 55 | M | |
| 292 | 294 | 50mm (6kg/cm2) | 50 | M | |
| 293 | 295 | Providing and fixing PVC pipes including fixing the pipe with clamps/ clips at 1.00 m\nspacing. This includes jointing of pipes with one step PVC solvent cement and testing\nof joints complete as per direction of Engineer-in-Charge \n-External work - Exposed on wall 110mm (6kg/cm2) | 50 | M | |
| 294 | 296 | 75mm (6kg/cm2) | 25 | M | |
| 295 | 297 | Water Supply Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having\nthermal stability for hot & cold water supply including all CPVC plain & brass\nthreaded fittings This includes jointing of pipes & fittings with one step CPVC\nsolvent cement, trenching, refilling & testing of joints complete as per direction\nof Engineer in Charge. External work 40 mm nominal outer dia Pipes | 50 | M | |
| 296 | 298 | 50 mm nominal outer dia Pipes | 50 | M | |
| 297 | 299 | 62.50 mm nominal inner dia Pipes | 25 | M | |
| 298 | 300 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality\n(screwed end) : 40 mm nominal bore | 10 | Nos | |
| 299 | 301 | Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts,\nrubber insertions etc. (the tail pieces if required will be paid separately) : Class II | 6 | No | |
| 300 | 302 | Providing and fixing gun metal non- return valve of approved quality (screwed\nend) : 40 mm nominal bore Horizontal | 10 | Nos | |
| 301 | 303 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked,\nwith cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow\npipes but without fittings and the base support for tank.: Circular tank | 2000 | Ltr | |
| 302 | 304 | Supplying and fixing C.I. cover frame for manholes: 560 mm diameter C.I. cover (heavy duty) the weight of the cover to be not less than 108 kg including cost, conveyance, labour charges etc complete | 2 | Nos | |
| 303 | 305 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets:With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 etc complete | 2 | Nos | |
| 304 | 306 | APPENDIX -V Construction of Police Control Room at Nilakkal Clearing Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30cm measured at a height of 1m above ground level and removal of rubbish outside the site and to unobjectionable place | 600 | Sq.m | |
| 305 | 307 | Earth Work Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan)including getting out and disposal of excavated earth lead upto 50 m and lift upto1.5 m, as directed by Engineer-in-charge. All kinds of soil | 138 | Cu.m | |
| 306 | 308 | Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.\n2.26.1 All kinds of soil | 4 | Cu.m | |
| 307 | 309 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | 57 | Cu.m | |
| 308 | 310 | Providing and laying in position cement concrete of specified grade excluding\nthe cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm\nnominal size) | 51 | Cu.m | |
| 309 | 311 | Providing and laying damp-proof course 50mm thick with cement concrete\n1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm\nnominal size). | 45 | Sq.m | |
| 310 | 312 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. | 360 | per 50 kg cement | |
| 311 | 313 | Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete | 119 | Sq.m | |
| 312 | 314 | Centering and shuttering including strutting, propping etc. and removal of form for :Lintels, beams, plinth beams, girders, bressumers and cantilevers | 351 | Sq.m | |
| 313 | 315 | Centering and shuttering including strutting, propping etc. and removal of form for :Suspended floors, roofs, landings balconies and access platform | 55 | Sq.m | |
| 314 | 316 | Centering and shuttering including strutting, propping etc. and removal of form : Columns, Pillars, Piers, Abutments, Posts and Struts | 33 | Sq.m | |
| 315 | 317 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone\n aggregate 20 mm nominal size).\n | 37 | Cu.m | |
| 316 | 318 | Reinforced cement concrete work in beams, suspended floors, roofs having slope\nup to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills,\nstaircases and spiral stair cases above plinth level up to floor five level, excluding\nthe cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement\n: 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). | 57 | M | |
| 317 | 319 | Steel reinforcement for R.C.C. work including straightening, cutting, bending,\nplacing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. | 9870 | Kg | |
| 318 | 320 | Brick/Mansonry, Partition Work Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 (1 cement : 6 coarse sand) etc complete | 33 | Cu.m | |
| 319 | 321 | Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete.75 mm overall thickness partition with 12.5 mm thick double skin fire rated board conforming to IS: 2095: part I | 696 | Sq.m | |
| 320 | 322 | Wood, Upvc and PVC Work Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc | 529 | Kg | |
| 321 | 323 | Providing and fixing glazing in aluminium /uPVC door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness | 27 | Sq.m | |
| 322 | 324 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast\nlugs or with dash fasteners of required dia & length ( hold fast lugs or\ndash fastener shall be paid for separately). | 0.6 | Cu.m | |
| 323 | 325 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. 35 mm thick shutters | 11 | Sq.m | |
| 324 | 326 | Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water\netc. After fixing frame the gap between frame and adjacent finished wall shall\nbe filled with weather proof silicon sealent over backer rod of required size and\nof approved quality, all complete as per approved drawing & direction of\nEngineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent\nshall be paid separately)\nNote: For uPVC frame and sash extruded profiles minus 5% tolerance in\ndimension i.e. in depth & width of profile shall be acceptable . b)Three track three panels sliding window with fly proof S.S wire mesh (Two nos.\nglazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash\n46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 1.75 sqm). | 27 | Sq.m | |
| 325 | 327 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos. of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer-in-Charge. | 55 | M | |
| 326 | 328 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast\nlugs or with dash fasteners of required dia & length ( hold fast lugs or\ndash fastener shall be paid for separately). | 0.6 | Cu.m | |
| 327 | 329 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture . M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing.30 mm thick plain PVC door shutters | 34 | Sq.m | |
| 328 | 330 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating\nnot less than grade AC 10 as per IS : 1868 ) transparent or dyed to required\ncolour or shade, with necessary screws etc. complete : 150x10 mm | 44 | Nos | |
| 329 | 331 | Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete.75x65x4 mm (heavy type) | 132 | Nos | |
| 330 | 332 | Providing and fixing bright finished brass hard drawn hooks and eyes : 300 mm | 44 | Nos | |
| 331 | 333 | Providing and fixing bright finished brass hard drawn hooks and eyes : 100 mm | 11 | Nos | |
| 332 | 334 | Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. | 132 | Nos | |
| 333 | 335 | Providing and laying vitrified floor tiles in different sizes (thickness to be\nspecified by the manufacturer) with water absorption less than 0.08% and\nconforming to IS: 15622, of approved make, in all colours and shades, laid on\n20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey\ncement slurry @ 3.3 kg/ sqm including grouting the joints with white cement\nand matching pigments etc., complete. Size of Tile 600x600 mm | 440 | Sq.m | |
| 334 | 336 | Providing and laying Vitrified tiles in different sizes (thickness to be specified\nby manufacturer), with water absorption less than 0.08 % and conforming to\nI.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps,\nover 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing\nwith grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white\ncement & matching pigments etc. complete. Size of Tile 600x600 mm | 46 | Sq.m | |
| 335 | 337 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete. | 33 | Sq.m | |
| 336 | 338 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be\nspecified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | 160 | Sq.m | |
| 337 | 339 | Roofing Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat ofapproved steel primer all complete. | 19181 | Kg | |
| 338 | 340 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including\ncutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 15000 | Kg | |
| 339 | 341 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18\nmicrons. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping\nscrews of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape\nwherever required. | 635 | Sq.m | |
| 340 | 342 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating\n120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :\n Ridges plain (500 - 600mm) | 75 | M | |
| 341 | 343 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592\nType A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,\n(i) Single socketed pipes. 110 mm diameter | 18 | M | |
| 342 | 344 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50 x 50 x 50 mm hardwood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm dia | 4 | Nos | |
| 343 | 345 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion (a)Bend 87.5o:110mm | 4 | Nos | |
| 344 | 346 | b)Shoe(plain):110mm | 4 | Nos | |
| 345 | 347 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. a)110mm | 4 | Nos | |
| 346 | 348 | Finishing 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) | 165 | Sq.m | |
| 347 | 349 | 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:3 (1 cement: 3 fine sand) | 76 | Sq.m | |
| 348 | 350 | Providing and applying plaster of paris putty of 2 mm thickness over\nplastered surface to prepare the surface even and smooth complete | 163 | Sq.m | |
| 349 | 351 | Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces :\nTwo coats | 163 | Sq.m | |
| 350 | 352 | Painting with synthetic enamel paint of approved brand and manufacture to\ngive an even shade : Two or more coats on new work | 250 | Sq.m | |
| 351 | 353 | Plumbing Works Sanitary installation Providing and fixing white vitreous china pedestal type water closet\n(European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets,\n40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid | 11 | Nos | |
| 352 | 354 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps\netc. including moulding, rubbing and polishing of cut edges etc. complete. | 11 | Nos | |
| 353 | 355 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass\nspreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever\nrequired : Range of three urinal basins with 10litre white P.V.C. automatic flushing cistern | 12 | Nos | |
| 354 | 356 | Providing and fixing C.P. brass bib cock of approved quality conforming to\nIS:8931 : 15 mm nominal bore | 11 | Nos | |
| 355 | 357 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width78 mm and effective height of 88 mm, weighing not less than 190 gms. | 11 | Nos | |
| 356 | 358 | Providing and fixing PTMT liquid soap container 109 mm wide, 125mm high and 112 mm distance from wall of standard shape withbracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. | 11 | Nos | |
| 357 | 359 | Supplying, laying and jointing hard PVC pipes with PVC specials such as tees, bends, door bend, door tee, elbow, unions, etc. with clamp testing the lines rectifying any leakages or defects etc. complete as directed by the Engineer in charge for soil, waste, rain water, drains, vent pipe, etc. concealed or open at all levels including cost conveyance of all materials , labour charges, sundries etc. complete for concealed work as directed by the Engineer in charge. 110mm (6kg/cm2) | 75 | M | |
| 358 | 360 | 75mm (6kg/cm2) | 55 | M | |
| 359 | 361 | 50mm (6kg/cm2) | 50 | M | |
| 360 | 362 | Providing and fixing PVC pipes including fixing the pipe with clamps/ clips at 1.00 m\nspacing. This includes jointing of pipes with one step PVC solvent cement and testing\nof joints complete as per direction of Engineer-in-Charge \n-External work - Exposed on wall 110mm (6kg/cm2) | 50 | M | |
| 361 | 363 | 75mm (6kg/cm2) | 25 | M | |
| 362 | 364 | Water Supply Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having\nthermal stability for hot & cold water supply, including all CPVC plain & brass\nthreaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes\njointing of pipes & fittings with one step CPVC solvent cement and the cost of\ncutting chases and making good the same including testing of joints complete\nas per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls 20 mm nominal outer dia Pipes | 100 | M | |
| 363 | 365 | 25 mm nominal outer dia Pipes | 25 | M | |
| 364 | 366 | 32 mm nominal outer dia Pipes | 25 | M | |
| 365 | 367 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having\nthermal stability for hot & cold water supply including all CPVC plain & brass\nthreaded fittings This includes jointing of pipes & fittings with one step CPVC\nsolvent cement, trenching, refilling & testing of joints complete as per direction\nof Engineer in Charge. External work 40 mm nominal outer dia Pipes | 50 | M | |
| 366 | 368 | 50 mm nominal outer dia Pipes | 50 | M | |
| 367 | 369 | 62.50 mm nominal inner dia Pipes | 25 | M | |
| 368 | 370 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having\nthermal stability for hot & cold water supply, including all CPVC plain & brass\nthreaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This\nincludes jointing of pipes & fittings with one step CPVC solvent cement and\ntesting of joints complete as per direction of Engineer in Charge.\nInternal work - Exposed on wall 20 mm nominal outer dia Pipes | 50 | M | |
| 369 | 371 | 25 mm nominal outer dia Pipes | 50 | M | |
| 370 | 372 | 32 mm nominal outer dia Pipes | 50 | M | |
| 371 | 373 | 40 mm nominal outer dia Pipes | 25 | M | |
| 372 | 374 | 50 mm nominal outer dia Pipes | 25 | M | |
| 373 | 375 | 62.50 mm nominal inner dia Pipes | 25 | M | |
| 374 | 376 | 75 mm nominal inner dia Pipes | 25 | M | |
| 375 | 377 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality\n(screwed end) : 20 mm nominal bore | 2 | Nos | |
| 376 | 378 | 25 mm nominal bore | 2 | Nos | |
| 377 | 379 | 32 mm nominal bore. | 2 | Nos | |
| 378 | 380 | 40 mm nominal bore | 2 | Nos | |
| 379 | 381 | 50 mm nominal bore | 2 | Nos | |
| 380 | 382 | 65 mm nominal bore | 2 | Nos | |
| 381 | 383 | 80 mm nominal bore | 2 | Nos | |
| 382 | 384 | Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts,\nrubber insertions etc. (the tail pieces if required will be paid separately) : Class II | 5 | Nos | |
| 383 | 385 | Providing and fixing gun metal non- return valve of approved quality (screwed\nend) : 40 mm nominal bore Horizontal | 4 | Nos | |
| 384 | 386 | 50 mm nominal bore Horizontal | 1 | No | |
| 385 | 387 | 65 mm nominal bor Horizontal | 4 | Nos | |
| 386 | 388 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked,\nwith cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow\npipes but without fittings and the base support for tank.: Circular tank | 2000 | Ltr | |
| 387 | 389 | Supplying and fixing C.I. cover frame for manholes: 560 mm diameter C.I. cover (heavy duty) the weight of the cover to be not less than 108 kg including cost, conveyance, labour charges etc complete | 2 | Nos | |
| 388 | 390 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets:With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 etc complete | 2 | Nos |
AI Tender Summary
Tender Timeline
Sep 07, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedSep 26, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 30, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender