Provision Of Certain Sanctioned Works At New Mil Stn Gangtok Under Age B R I And Age E M, Gangtok-Sikkim

Provision Of Certain Sanctioned Works At New Mil Stn Gangtok Under Age B R I And Age E M Excavation Over Areas, N Exc 1.5 M Deep And Getting Out As In Soft / Loose Soil Complete All As Directed By The Engr-In-Charge. Returning, Filling In, Including Spreading Levelling Watering And Well Ramming In Layers Not Exceeding 25 Cms In Thick As In Soft / Loose Soils Complete All As Directed By The Engr-In-Charge. Removing Excavated Material To A Distance N.Exceeding 50M And Depositing Where Directed At A Level Not Exc. 1.5 Mtr Above The Starting Point Complete All As Directed By The Engr-In-Charge. Excavation In Post Holes ( Or Similar Holes ) In Soft / Loose Soil Each N.Exc 0.5 Cum, Getting Out, Returning, Filling In And Ramming Earth Or Broken Rubble Mixed With Earth Around, In Layers N.Exc 25 Cm And Removing Surplus Soil To A Distance N.Exc 50 Mtrs Complete All As Specified And Directed By The Engr-In-Charge 5 Surface Excavation N.Exc ( Not Exceeding ) 30 Cm Deep And Averaging 15 Cm Deep And Getting Out In Soft / Loose Soil Complete All As Directed By The Engr-In-Charge. 6 Excavating In Trenches, N Exc 1.5 M Wide And N Exc 1.5 M In Depth; For Foundation, Etc. Or For Shafts, Wells, Cesspits, Manholes, Pier Holes, Etc. N Exc 10 Sq M On Plan And N Exc 1.5 M In Depth And Getting Out In Soft / Loose Soil Complete All As Specified And Directed By The Engr-In-Charge 7 Spreading And Leveling In Layers N.Exc 25 Cm Thick Selected Earth Under Floors Including Watering Well Ramming Etc Complete All As Specified And As Directed By The Engr-In-Charge. 8Material And Labour For Hardcore Of Gauge N.Exc.63Mm ( Using Broken Stone Or Boulders ) Deposited, Spread And Levelled In Layers Not Exc.15Cm Thick, Watered And Rolled / Rammed To A True Surface Complete All As Directed. Material And Labour For Sand Filling In Layers Under Floors Or In Foundations Including Watering And Consolidation Complete All As Specified And Directed By The Engr-In-Charge. 10M&L For Hand Packing Using Broken Stones Or Boulders ( Any Thickness ) At Back Of Retaining Wall For Raising Or Lowering To The Required Level Complete All As Directed Material & Labour For Pcc 1:3:6 Type C-2 ( Using 40Mm Graded Stone Aggregate ) As In Foundations Filling And Mass Concrete Etc Complete All As Specified & As Directed. 13M&L For Plain Cement Concrete 1:3:6 Type C2 As In Plum Concrete In Retaining Walls Including Plums Of Stone Boulders ( Basalt, Trap Or Any Other Approved ) Of Size 150Mm To 300Mm Complete All As Directed.Complete All As Specified And As Directed. Note : ( I ) Volume Of Stone Boulders Should Not Exceed 25% Of Concrete ( Ii ) Stone Boulders Shall Be Measured And Paid For Separately 14 M&L For Providing Cement Concrete ( 1:2:4 ) , Type B0, ( Using 12.5 Mm Graded Aggregate ) As In Coping With Plain Fair Faces Including Chamfers, Weathering, Slightly Rounded Or Chamfered Angles And Throating, Including Necessary Form Work Complete All As Directed. M&L For Rcc M25 ( Design Mix ) ( Using 20 Mm Graded Stone Aggregate ) As In Rcc Beam / Band Including Necessary Form Works Complete All As Specified And As Directed. Material & Labour For Pcc 1:2:4 Type B-1 ( Using 20Mm Graded Stone Aggregate ) As In Foundations Filling And Mass Concrete Etc Complete All As Specified & As Directed. M&L For Roughning Surfaces Of Old Concrete Floor By Picking, Sweeping Cleaning And Washing Down With Water To Remove Dust Etc Complete All As Directed. M&L For Pre Cast Cement Concrete Block Masonry With Solid Blocks, Exc. 10 Cm In Width And Settting In Cement Mortar 1:6 Type C1, ( 1:3:6 ) ( Using 20 Mm Graded Stone Aggregate ) As Per Is 383 Complete All As Specified And As Directed. Material & Labour For Rcc Type B1 1:2:4 ( Using 20Mm Graded Stone Aggregate ) As In Foundations, Including Raft Footings, Foundation Beams; Plinth Beams; Bases For Columns, Etc., Basement Slabs, Under Reamed Piles And Mass Concrete Including Necessary Form Work Complete All As Specified & As Directed. M&L For 75Mm Thick Pcc ( 1:3:6 ) , Type C-2 ( Using 40 Mm Graded Stone Aggregate ) As In Sub -Base Of Floor Over And Including 50 Micron Polythene Film Laid Complete All 23 Supply Only Stone Boulders ( Basalt, Trap Or Any Other Approved ) Exceeding 15Cm Upto 30Cm Complete All As Specified And As Directed. 24 Materials & Labour For Rendering 15 Mm Thick In Cement Mortar ( 1:4 ) On Fair Face Of Brick Or Concrete Surfaces Finished Surface Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed. 25 Material & Labour For Mild Steel Tmt Bars 5 Mm Dia And Over Upto Including 10Mm Dia As In Stirrups, Spacers And Binders Cut To Length, Bent To Shape Required, Including Cranking , Bending Spirally For Hooping For Columns , Hooking Ends And Binding With And Including Mild Steel Wire ( Annealed ) Not Less Than 0.9 Mm Dia Or Securing With Clips Complete All As Specified & As Directed. M&L For Mild Steel Tmt Bars, 10Mm Dia And Over Cut To Length, Bent To Shape Required Including Cranking , Bending Spirally, Hooping For Columns, Hookings Ends And Binding With And Including Ms Wire ( Annealed ) Not Less Than 0.9 Mm Dia Or Securing With Clips Complete All As Specified & As Directed. Material & Labour For Mild Steel Tmt Bars 6Mm To 8Mm Dia As In Stirrups, Spacers And Binders Cut To Length, Bent To Shape Required, Including Cranking , Bending Spirally For Hooping For Columns , Hooking Ends And Binding With And Including Mild Steel Wire ( Annealed ) Not Less Than 0.9 Mm Dia Or Securing With Clips Complete All As Specified & As Directed. S&F Ms Steel Works As In Posts And Struts In Fencing Including Cutting Tops To Shape As Directed, Drilling Holes, Notching For Wire, Etc; Flat Iron Fillets ( For Securing Wire Mesh Etc ) Including All Necessary Drilling, Bolting Or Riveting, Etc., And Similar Work Confirming To Fe-290 Gde E-165 Complete All As Specified And As Directed. S&F Mild Steel Screw Bolts ( Machine Made ) With Hexagonal Or Square Heads At One End And Screwed The Other, Or Screwed Both Ends; Each Screwed End To Be Fitted With Washers And One Hexagonal Or Square Nut Length Of Bolt Exc 5 Cm And N.Exc 10Cm Long And Dia Of Neck 11 To 15Mm Complete All As Directed. S&F Mild Steel Work As In Bands, Straps, Supports Or Stays For Rain Water, Ventilating Pipes Including Bolts, Hooks For Large Gates, Pintle Hinges, Large Hasps And Staples, Chains, Hand Made Sliding Bolts, Clamps, Hold Fasts, Wall Ties, Hooks For Hanging Fans, Plain Angle Cleats For Securing Purlins, Trusses And Rafters, Knee Piece Inserts, Two Way And Three Way Straps, Plate Washers And Similar Small Articles Conforming To Fe-290 Gde-E-165 Complete All As Specified & As Directed. M&L For Mild Steel Round Bars 12Mm Dia, Cut To Length, Bent To Shape Required, Including Cranking , Bending , Hooping Ends As Horizontal Runner ( Tie ) To Fix Chain Link Fencing, Etc Complete All As M&L For 75Mm Thick Pcc ( 1:3:6 ) , Type C-2 ( Using 40 Mm Graded Stone Aggregate ) As In Plinth Protection; Path / Hardstanding Etc Laid In Bays / Panels Not Exc. 2.00 Sqm Each Including Construction Joints At Suitable Interval And Each Corner And Filled With Bituminous Mastic Filling ( 1 Part Bitumen & 3 Part Sand ) And Finished The Surface Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed Materials & Labour For Rendering 15 Mm Thick In Cement Mortar ( 1:6 ) On Brick Or Concrete Surfaces Finished Other Than Fair Faces Complete All As Specified And As Directed. Supply Only Integral Water Proofing Compound Confirming To Is-2465-2003 Of Approved Make Complete All As Specified And As Directed. S&F Of Factory Made Solid Pvc Door Frame Of Size 50Mmx47mm Made Out Of 5Mm Thick Single Side Prelam Pvc Sheet Reinforced With Mild Steel Square Tube And Edges Will Be Painted To Match With Single Side Prelam Sheet As Per Specification And Drawing Given On Mes Schedule Part-Ii ( 2004 ) Complete All As Specified & Directed. S&F Of 30Mm Thick ( Style Thickness ) Factory Made Solid Panel Pvc Door Shutter Consisting Of Frame Made Out Of Mild Steel Tubes For Top And Bottom Rails, Solid Steel Frame Shall Be Covered With Heat Moulded Single Side Prelam Pvc C Channel Having A Pvc Sheet Strip Of 20Mm Width Stuck Inside With Solvent Cement For Stiles And Single Side Prelam Pvc Sheet For Top Rail, Lock Rail And Bottom Rail On Either Side & As Gap Insert For Top Rail And Bottom Rail On Either Side & As Gap Insert For Top Rail And Bottom Rail, Paneling Of Both Side Prelam Pvc Sheet To Be Fitted In The Mild Steel Frame Welded / Sealed To The Stiles And Rails With Suitable Pvc Sheet Beading And Jointed Together With Solvent Cement As Per Specification And Drawing Given On Mes Schedule Part-Ii ( 2010 ) S&F In Vitreous China Wash Down Water Closet Semi-Pedestal Pattern Ewcd White With All Fittings Fixed As In Repairs ( Excluding Flushing Cistern ) Cp Flush Pipe 32 Mm Dia Including Plastic Water Closet Seat, Black Closed Pattern With Flat Bottom And Cover And Ms Cp Aluminium / Pvc Hinging Device Complete All As Specified And As Directed. Make Parryware Code No C-0272 Universal P Trap And C-8131 Universal Of Parryware Seat Cover Or Equivalent Make As Specified. Supply And Fix 10 Litre Capacity Low Level Pvc Flushing Cistern ( White ) , Syphonic Action Type, With Inlet, Ball Valve, Float, Handle, Fixed With Cast Iron Bracket ( Of Suitable Size ) And Providing 32 Mm Dia Pvc Flush Pipe And Making All Necessary Connections Complete All As Specified And As Directed. Make : Cera Cat No. B1010101 Or Equivalent Of Make As Specified In List Of Makes. Supply And Fix 110 Mm Bore Pvc ( Swr ) Bend Of Any Radius For Pvc ( Swr ) Pipes, Fixed To Walls Or Fixed To Steel Gutter Complete All As Directed. Supply And Fix 110 Mm Bore Pvc ( Swr ) Junction Single, ( Single T ) Equal Or Unequal , Electrical And Mechanical Works Etc

INR 500 /-

INR 60600.0 /-

INR 30.30 Lakhs /-

Name of Work : PROVISION OF CERTAIN SANCTIONED WORKS AT NEW MIL STN GANGTIOK UNDER AGE B/R-I & AGE E/M.
	Sl. No.	TEXT #	Item Code / Make	Quantity	Units
1	1	SCHEDULE 'A' PART-I (B/R WORKS)	BI01010001010000000000000515BI0100001113
2	1.01	Excavation over areas, n exc 1.5 m deep and getting out as in soft / loose soil complete all as directed by the Engr-in-Charge.	BI01010001010000000000000515BI0100001114	30	Per\nCum
3	1.02	Returning, filling in, including spreading levelling watering and well ramming in layers not exceeding 25 cms in thick as in soft/loose soils complete all as directed by the Engr-in-Charge.	BI01010001010000000000000515BI0100001115	11.5	Per\nCum
4	1.03	Removing excavated material to a distance n.exceeding 50m and depositing where directed at a level not exc. 1.5 mtr above the starting point complete all as directed by the Engr-in-Charge.	BI01010001010000000000000515BI0100001116	23.25	Per \nCum
5	1.04	Excavation in post holes (or similar holes) in soft/loose soil each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm and removing surplus soil to a distance n.exc 50 mtrs complete all as specified and directed by the Engr-in-Charge	BI01010001010000000000000515BI0100001117	18	Each
6	1.05	Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out in soft /loose soil complete all as directed by the Engr-in-Charge.	BI01010001010000000000000515BI0100001118	8	Per \nSqm
7	1.06	Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or\nfor shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc\n1.5 m in depth and getting out in soft/loose soil complete all as specified and directed by the Engr-in-Charge	BI01010001010000000000000515BI0100001119	4.75	Per\nCum
8	1.07	Spreading and leveling in layers n.exc 25 cm thick selected earth under floors including watering well ramming etc complete all as specified and as directed by the Engr-in-Charge.	BI01010001010000000000000515BI0100001120	0.5	Per \nCum
9	1.08	Material and labour for hardcore of gauge n.exc.63mm (using broken stone or boulders) deposited, spread and levelled in layers not exc.15cm thick, watered and rolled/rammed to a true surface complete all as directed.	BI01010001010000000000000515BI0100001121	0.45	Per \nCum
10	1.09	Material and labour for sand filling in layers under floors or in foundations including watering and consolidation complete all as specified and directed by the Engr-in-Charge.	BI01010001010000000000000515BI0100001122	0.2	Per \nCum
11	1.1	Material and labour for sand filling in layers as in sub base to inter-locking paver blocks including watering and consolidation complete all as specified and directed by the Engr-in-Charge.	BI01010001010000000000000515BI0100001123	12	Per\nCum
12	1.11	M&L for Hand Packing using broken stones or boulders ( any thickness) at back of retaining wall for raising or lowering to the required level complete all as directed	BI01010001010000000000000515BI0100001124	19	Per \nCum
13	1.12	Material & labour for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundations filling and mass concrete etc complete all as specified & as directed.	BI01010001010000000000000515BI0100001125	10	Per Cum
14	1.13	M&L for Plain cement concrete 1:3:6 type C2 as in plum concrete in retaining walls including plums of Stone boulders ( basalt, trap or any other approved) of size 150mm to 300mm complete all as directed.complete all as specified and as directed. \nNote : (i) Volume of stone boulders should not exceed 25% of concrete (ii) Stone Boulders shall be measured and paid for separately	BI01010001010000000000000515BI0100001126	45	Per\nCum
15	1.14	M&L for providing cement concrete (1:2:4), type B0, (using 12.5 mm graded aggregate) as in coping with plain fair faces including chamfers, weathering, slightly rounded or chamfered angles and throating, including necessary form work complete all as directed.	BI01010001010000000000000515BI0100001127	10	Per \nCum
16	1.15	M&L for RCC M25 (Design mix) (using 20 mm graded stone aggregate) as in RCC beam / band including necessary form works complete all as specified and as directed.	BI01010001010000000000000515BI0100001128	9	Per \nCum
17	1.16	Material & labour for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in foundations filling and mass concrete etc complete all as specified & as directed.	BI01010001010000000000000515BI0100001129	3	Per Cum
18	1.17	M&L for roughning surfaces of old concrete floor by picking, sweeping cleaning and washing down with water to remove dust etc complete all as directed.	BI01010001010000000000000515BI0100001130	494	Per \nSqm
19	1.18	Material & labour for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundations filling and mass concrete etc complete all as specified & as directed.	BI01010001010000000000000515BI0100001131	12.95	Per Cum
20	1.19	M&L for pre cast cement concrete block masonry with solid blocks, exc. 10 cm in width and settting in cement mortar 1:6 type C1, (1:3:6) (using 20 mm graded stone aggregate) as per IS 383 complete all as specified and as directed.	BI01010001010000000000000515BI0100001132	4.27	Per\nCum
21	1.2	Material & labour for RCC Type B1 1:2:4 (using 20mm graded stone aggregate) as in foundations, including raft footings, foundation beams; plinth beams; bases for columns, etc., basement slabs, under reamed piles and mass concrete including necessary form work complete all as specified & as directed.\nNOTE : Re-inforcement shall be measured and paid separately.	BI01010001010000000000000515BI0100001133	0.5	Per \nCum
22	1.21	Material & labour for RCC Type B1 1:2:4 (using 20mm graded stone aggregate) as in beams, cantilever, bressummers, lintel over 1.50m span including necessary form work complete all as specified & as directed.\nNOTE : Re-inforcement shall be measured and paid separately.	BI01010001010000000000000515BI0100001134	0.4	Per \nCum
23	1.22	M&L for 75mm thick PCC (1:3:6), type C-2 (using 40 mm graded stone aggregate ) as in sub -base of floor over and including 50 micron polythene film laid complete all as specified and as directed	BI01010001010000000000000515BI0100001135	0.62	Per \nSqm
24	1.23	Supply only stone boulders ( basalt, trap or any other approved) exceeding 15cm upto 30cm complete all as specified and as directed.	BI01010001010000000000000515BI0100001136	12	Per\nCum
25	1.24	Materials & labour for rendering 15 mm thick in cement mortar (1:4) on fair face of brick or concrete surfaces finished surface even and smooth without using extra cement complete all as specified and as directed.	BI01010001010000000000000515BI0100001137	90	Per \nSqm
26	1.25	Material & labour for Mild steel TMT bars 5 mm dia and over upto including 10mm dia as in stirrups, spacers and binders cut to length, bent to shape required, including cranking , bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified & as directed.	BI01010001010000000000000515BI0100001138	50	Per Kg
27	1.26	M&L for mild steel TMT bars,10mm dia and over cut to length, bent to shape required including cranking ,bending spirally, hooping for columns, hookings ends and binding with and including MS wire(annealed) not less than 0.9 mm dia or securing with clips complete all as specified & as directed.	BI01010001010000000000000515BI0100001139	540	Per Kg
28	1.27	Material & labour for Mild steel TMT bars 6mm to 8mm dia as in stirrups, spacers and binders cut to length, bent to shape required, including cranking , bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified & as directed.	BI01010001010000000000000515BI0100001140	200	Per Kg
29	1.28	S&F MS Steel works as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc., and similar work confirming to Fe-290 Gde E-165 complete all as specified and as directed.	BI01010001010000000000000515BI0100001141	250	Per Kg
30	1.29	S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut length of bolt exc 5 cm and n.exc 10cm long and dia of neck 11 to 15mm complete all as directed.	BI01010001010000000000000515BI0100001142	50	Per Kg
31	1.3	S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut length of bolt exc 15cm and n.exc 22.5cm long and dia of neck 11 to 15mm complete all as directed.	BI01010001010000000000000515BI0100001143	2	Per Kg
32	1.31	S&F mild steel work as in bands, straps, supports or stays for rain water, ventilating pipes including bolts, hooks for large gates, pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins, trusses and rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified & as directed.	BI01010001010000000000000515BI0100001144	490	Per Kg
33	1.32	M&L for Mild steel round bars 12mm dia, cut to length, bent to shape required, including cranking , bending , hooping ends as horizontal runner(tie) to fix chain link fencing, etc complete all as specified & as directed.	BI01010001010000000000000515BI0100001145	48	Per Kg
34	1.33	S&F Rolled section as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleat or other connecting plates confirming to Fe-410-W (Gde-E-250) complete all as specified and as directed.	BI01010001010000000000000515BI0100001146	662	Per Kg
35	1.34	S&F 0.80 mm thick galvanised plain mild steel sheeting as in eaves board made to shape including fixing with claps on position complete as specified and directed by Engr-in-charge.	BI01010001010000000000000515BI0100001147	10	Per\nSqm
36	1.35	Supply and fix 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheets of any colour and any pattern as approved having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as in roof complete all as specified and directed by the Engr-in-Charge.	BI01010001010000000000000515BI0100001148	70.32	Per \nSqm
37	1.36	Supply and fix 0.50mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheets of any colour having tensile strength of 550 Mpa as in ridges, valley, eaves, etc fixed with self tapping screws complete all as specified and directed by the Engr-in-Charge	BI01010001010000000000000515BI0100001149	8	Per \nSqm
38	1.37	S&F 1mm thick mild steel sheet as in eaves gutter made to 150 mm dia, galvanised class 3, half round with rounded edges complete all as direcetd.	BI01010001010000000000000515BI0100001150	145	Per\nRm
39	1.38	Formwork to faces of walls, retaining walls, abutments, parapets and staircase railing and similar work including attached pillasters, buttresses, etc.complete all as directed	BI01010001010000000000000515BI0100001151	120	Per \nSqm
40	1.39	S&F geosynthetic material 75 mm dia as in weep holes covers complete all as directed.	BI01010001010000000000000515BI0100001152	35	Each
41	1.4	Dismantling posts or struts (wood, steel or R.C.C.) any section,embedded in Concrete, brick work, masonry, etc. including taking out embedded portionand making good disturbed ground complete all as specified and directed by the Engr-in-Charge	BI01010001010000000000000515BI0100001153	30	Per RM
42	1.41	Dismantling fencing wire mesh, any type complete all as specified and directed by the Engr-in-Charge	BI01010001010000000000000515BI0100001154	60	Per \nSqm
43	1.42	Supply and Fix PVC coated chain link fencing of 50mm x 50mm mesh size and made out of 3.15 mm dia (2.15 mm dia wire and 1mm thick PVC coating) conforming to IS fixed to any type of standard rails, straining bolts etc complete all as specified and as directed.	BI01010001010000000000000515BI0100001155	60	Per\nSqm
44	1.43	M&L for preparation of new or previously untreated steel surfaces of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as directed.	BI01010001010000000000000515BI0100001156	80	Per \nSqm
45	1.44	M&L for applying two coat of synthetic enamel paint over a coat of red oxide primer to new steel surface of any description n.exc 10 cm girth or width including preparation of new steel surfaces complete all as specified and directed	BI01010001010000000000000515BI0100001157	39	Per \n10 Rm
46	1.45	Material & labour for non skid coloured ceramic tiles of 7 to 8 mm thick (Square/ rectangular) area of each tile exc 0.18 sqm but not exc 0.38 sqm as in floors etc conforming to IS- 13712, grade B-II - (a) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including cement screed bed / bedding layer of 15mm thick in cement mortar (1:6) complete all as specified and as directed..	BI01010001010000000000000515BI0100001158	132	Per\nSqm
47	1.46	Material & labour for non skid coloured ceramic tiles of 7 to 8 mm thick (Square/ rectangular) area of each tile exc 0.18 sqm but not exc 0.38 sqm as in vertical surfaces such as skirting/dado / riser to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including cement screed bed / backing layer of 10mm thick in cement mortar (1:4) complete all as specified and as directed.	BI01010001010000000000000515BI0100001159	31	Per\nSqm
48	1.47	Material & labour for non skid coloured ceramic tiles of 7 to 8 mm thick (Square/ rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm as in floors etc conforming to IS- 13712, grade B-II - (a) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including cement screed bed / bedding layer of 15mm thick in cement mortar (1:6) complete all as specified and as directed..	BI01010001010000000000000515BI0100001160	50	Per\nSqm
49	1.48	Materials & labour for coloured glazed ceramic tiles of size (300 mm x 200 mm / 350 mm x 250 mm / 450mm x 350mm ) x 7 mm thick as in vertical surfaces such as skirting/dado / riser to steps etc conforming to IS - 13712 grade IB-III set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including cement screed bed / backing layer of 10mm thick in cement mortar (1:4) complete all as specified and as directed.	BI01010001010000000000000515BI0100001161	17	Per\nSqm
50	1.49	Supply and fix machine pressed precast concrete interlocking paver block of approved shape grade and size conforming to IS 15658-2006 of 60 mm thickness (M-35 grade) and with grey cement and pigment complete all as specified and as directed.	BI01010001010000000000000515BI0100001162	300	Per\nSqm
51	1.5	Material and labour for Lacquer coated precast chequered cement concrete tiles made with grey cement and pigment of size 300 x 300 x 25 mm thick as in pavement / footpath, set and jointed in neat cement slurry and pointed with cement laid over and including screed bed/ bedding layer of 15mm thick in cement mortar (1:4) complete all as directed.	BI01010001010000000000000515BI0100001163	16	Per Sqm
52	1.51	M&L for 75mm thick PCC (1:3:6), type C-2 (using 40 mm graded stone aggregate ) as in plinth protection; path / hardstanding etc laid in bays / panels not exc. 2.00 Sqm each including construction joints at suitable interval and each corner and filled with bituminous mastic filling (1 part bitumen & 3 part sand) and finished the surface even and smooth without using extra cement complete all as specified and as directed	BI01010001010000000000000515BI0100001164	5.94	Per\nSqm
53	1.52	Materials & labour for rendering 15 mm thick in cement mortar (1:6) on brick or concrete surfaces finished other than fair faces complete all as specified and as directed.	BI01010001010000000000000515BI0100001165	20	Per \nSqm
54	1.53	Materials & labour for rendering 20 mm thick in cement mortar (1:4) in two layer of 10 mm thick each with using WPC shall be mixed with cement mortar in finishing outer layer only as per manufacturer instruction, on other than fair face of brick/stone masonry surfaces (external surfaces) finished surface fair and even with out using extra cement complete all as specified and as directed.\nNote: WPC shall be measured and paid separately as supply only.	BI01010001010000000000000515BI0100001166	25	Per \nSqm
55	1.54	Supply only integral water proofing compound confirming to IS-2465-2003 of approved make complete all as specified and as directed.	BI01010001010000000000000515BI0100001167	3	Per Kg
56	1.55	S&F of factory made solid PVC door frame of size 50mmx47mm made out of 5mm thick single side prelam PVC sheet reinforced with mild steel square tube and edges will be painted to match with single side prelam sheet as per specification and drawing given on MES schedule Part-II (2004) complete all as specified & directed.	BI01010001010000000000000515BI0100001168	4.7	Per \nRm
57	1.56	S&F of 30mm thick (style thickness) factory made solid panel PVC door shutter consisting of frame made out of mild steel tubes for top and bottom rails, solid steel frame shall be covered with heat moulded single side prelam PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelam PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail on either side & as gap insert for top rail and bottom rail, paneling of both side prelam PVC sheet to be fitted in the mild steel frame welded /sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement as per specification and drawing given on MES Schedule Part-II (2010) Complete all as specified and directed.	BI01010001010000000000000515BI0100001169	1.32	Per \nSqm
58	1.57	S&F steel ventilator, with top hung shutter including hinges with fixed type MS handles , peg stay and tower bolt but with additional sash bars MS flats for fixing wire gauge complete all as specified & as directed.	BI01010001010000000000000515BI0100001170	0.54	Per \nSqm
59	1.58	S&F 3mm thick figured glass pin head type and glazing with oil putty including steel pin in square n.exc 0.5sq. m in each pane fixed to steel frame complete all as specified & as directed.	BI01010001010000000000000515BI0100001171	0.5	Per \nSqm
60	1.59	S&F 75mm long butt hinges, medium weight, cold rolled, mild steel complete all as specified.	BI01010001010000000000000515BI0100001172	3	Each
61	1.6	S&F 200mm long aluminum anodised tower bolts of extruded section and fixed complete all as specified and directed.	BI01010001010000000000000515BI0100001173	2	Each
62	1.61	S&F 150 mm long aluminium anodised handles, cast type, complete all as specified and directed	BI01010001010000000000000515BI0100001174	2	Each
63	1.62	Supply and fix galvanised steel water tubing 15 mm bore dia, medium grade with all fittings and fixed complete to walls/ceiling or laid in floors complete all as directed.	BI01010001010000000000000515BI0100001175	30	Per \nRm
64	1.63	S&F in vitreous china wash down water closet semi-pedestal pattern EWCD white with all fittings fixed as in repairs (excluding flushing cistern) CP flush pipe 32 mm dia including plastic water closet seat,black closed pattern with flat bottom and cover and MS CP aluminium/PVC hinging device complete all as specified and as directed. Make Parryware Code no C-0272 universal 'P' trap and C-8131 universal of Parryware seat cover or equivalent make as specified.	BI01010001010000000000000515BI0100001176	1	Each
65	1.64	Supply and fix 10 litre capacity low level PVC flushing cistern (white), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete all as specified and as directed. Make : Cera Cat No. B1010101 or equivalent of make as specified in List of makes.\n	BI01010001010000000000000515BI0100001177	1	Each
66	1.65	Supply & fix Bib tap , cast copper alloy, chromium plated Fancy type with crutch or butterfly handle, screwed down for 15mm bore GI Pipe or for brass ferrule complete all as directed. Make : JAQUAR Code : CON-107 KN or equivalent make as speciifed in list of makes	BI01010001010000000000000515BI0100001178	1	Each
67	1.66	Supply & fix 15 mm bore dia Stop cocks, cast copper, fancy type, chromium plated, with wall flange screwed down, screwed fro iron pipe or union and complete all as directed. Make : JAQUAR Code- CON 059 KN or equivalent make as speciifed in list of makes \n	BI01010001010000000000000515BI0100001179	3	Each
68	1.67	Material and labour for applying three coats of white washing including preparation of new / previously untreated surfaces of wall complete all as specified and as directed.	BI01010001010000000000000515BI0100001180	20	Sqm
69	1.68	M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of suitable primer complete all as specified and directed.	BI01010001010000000000000515BI0100001181	25	Per\nSqm
70	1.69	M&L for 2nd class hard wood timber scantling fixed clean swan complete all as specified & as directed.	BI01010001010000000000000515BI0100001182	0.04	Per\nCum
71	1.7	Materials & labour for 6 mm thick plywood, 5 ply, grade BWR, type BB, fixed with screws to timber frame work in wall / ceiling complete all as specified and as directed.	BI01010001010000000000000515BI0100001183	4	Per \nSqm
72	1.71	Materials and labour for 2nd class hard wood plain fillets, square, rectangular or triangular in section, clean swan, secured with nails, cross sectional area exc 03 sq.cm & n.exc 06 sq.cm, complete all as specified and as directed.	BI01010001010000000000000515BI0100001184	10	Per\nRm
73	1.72	Supply & fix 110 mm bore PVC (SWR) vent cowl fixed in position complete all as specified and directed.	BI01010001010000000000000515BI0100001185	1	Each
74	1.73	S&F 75mm bore, PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or under floors , fixed on walls with necessary clips complete all as specified and as directed.	BI01010001010000000000000515BI0100001186	15	Per\nRm
75	1.74	Supply only 75mm bore PVC pipe (SWR) single socketed, in any length with rubber ring joints, as in weep holes complete all as specified and as directed.	BI01010001010000000000000515BI0100001187	75	Per \nRm
76	1.75	Supply and fix 75mm bore PVC (SWR) bend of any radius for PVC (SWR) pipes, fixed to walls or fixed to steel gutter complete all as directed.	BI01010001010000000000000515BI0100001188	2	Each
77	1.76	Supply and fix 75 mm bore PVC (SWR) junction single,(Single T) equal or unequal complete all as directed .	BI01010001010000000000000515BI0100001189	1	Each
78	1.77	Supply & fix 75 mm dia PVC floor trap of outlet, with gratings, including jointing to waste pipe fixed in PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) complete all as specified and as directed.	BI01010001010000000000000515BI0100001190	1	Each
79	1.78	Supply and fix PVC connections 15 mm size with PTMT nuts of length 450mm complete all as directed by the Engr-in-Charge. Make- Prayag Cat No 323 or equivalent make as specified.	BI01010001010000000000000515BI0100001191	3	Each
80	1.79	Taking down cement plaster of any description on brick or stone walls, including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by the Engr-in-Charge.	BI01010001010000000000000515BI0100001192	34	Per\nSqm
81	1.8	S&F110mm bore, PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or under floors , fixed on walls with necessary clips complete all as specified and as directed.	BI01010001010000000000000515BI0100001193	45	Per\nRm
82	1.81	Supply and fix 110 mm bore PVC (SWR) bend of any radius for PVC (SWR) pipes, fixed to walls or fixed to steel gutter complete all as directed.	BI01010001010000000000000515BI0100001194	21	Each
83	1.82	Supply and fix 110 mm bore PVC (SWR) junction single,(Single T) equal or unequal complete all as directed .	BI01010001010000000000000515BI0100001195	21	Each
84	2	SCHEDULE 'A' PART-II (E/M WORKS)	BI01010001010000000000000515BI0100001196
85	2.01	M&L for point wiring(surface type)with using 1.50 Sqmm PVC insulated (FRLS) unsheathed single core cable working voltage 1100 volts grade conforming to IS-694 Part I & II of 2000 with multistranded copper conductor drawn in and includingPVC rigid non metalic25mm PVC casing caping system (double locking) with all casing capping fittings & accessories with PVC polycarbonate rectangular box of suitable size fixed with brass screws and cup washers, including 1.50 Sq mm (nominal cross sectional area) PVC insulated (FRLS) unsheathed single core multistranded copper conductor cable as earth continuity conductor connected to main switches / DB's or common earth dolly for one light/ fan / exhaust point controlled by one piano type one way 5 Amp switch complete all as specified and directed.\nNote : Red colouerd cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.	BI01010001010000000000000515BI0100001197	6	Per Point
86	2.02	All as per item No 2.01 here-in-before but for one 15/16 amps switch socket outlet / metal clad sockets on independent board with 2.50 Sqmm PVC (FRLS) insulated un-sheathed copper conductor cable multistranded conductor 1100 volts grade and 2.50 Sqmm copper conductor cable (FRLS) as earth continuity conductor complete all as specified & as directed.	BI01010001010000000000000515BI0100001198	1	Per Point
87	2.03	Supply & fix switch piano, flush type, SP, one way, 5/6 Amps 230 Volts, white/ivory finish complete all as directed.	BI01010001010000000000000515BI0100001199	6	Each
88	2.04	Supply & fix switch socket combination, 2 and 3 pin, 5/6 amps, multipurpose, flush, non shutter, non inter locking type, 230 volt flush type, white/ivory finish with four fixing hole complete all as directed complete all as directed.	BI01010001010000000000000515BI0100001200	1	Each\n
89	2.05	Supply and fix ceiling rose, surface Bakelite, large type, three terminals 220/240 volts , white/ivory finish complete all as specified and as directed.	BI01010001010000000000000515BI0100001201	3	Each
90	2.06	Supply & fix sheet metal enclosure for 4 way Distribution Boards (DB’s), double door, Single pole and neutral with 200 amps rated bus bar, including bus bar neutral link, earth bar and din rail, IP-43 & IK-09 protection, suitable for fixing MCBs/isolators including taking down old unserviceable one complete all as specified and as directed by the Engr-in-Charge. \nMake : Legrand Cat No.6077 10 or equivalent make as specified in list of makes	BI01010001010000000000000515BI0100001202	1	Each
91	2.07	Supply & fix MCB, SPN, 32 to 63 amps, 240 volts, ‘C’ curve, 10KA complete all as specified and as directed by the engineer in Charge.\nMake : C & S Cat No. CSMBS1C32N to CSMBS1C63N or equivalent make as specified in list of make .	BI01010001010000000000000515BI0100001203	1	Each
92	2.08	Supply & fix MCB, SP, 6 to 32 amps, 240 volts, ‘C’ curve, 10KA complete all as specified and as directed by the engineer in Charge.\nMake : C & S Cat No. CSMBS1C6 to CSMBS1C32 or equivalent make as specified in list of make .	BI01010001010000000000000515BI0100001204	2	Each
93	2.09	Supply & fix lamp holder angular/straight insulated body, with back plate suitable for batten fittings, white/ivory finish complete all as direcetd.	BI01010001010000000000000515BI0100001205	3	Each
94	2.1	S&F, IP 20, Class I, LED light fitting 1 x 16 W (4 FT), CRI >=80, CT >=5700K, wall / surface mounted, integrated type, constructed of fire retardant engineering grade extruded plastic & decorative end caps with integrated high efficiency electronic driver & surge suppressor of 2 KV or more, luminaire efficacy > 95 lumens/Watt, power factor >/ 0.90, operating range – 140 to 270 V, 50 Hz fixed with suitable fixing arrangements complete including 01 No 16 W (4 FT) LED lamp with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size all as specified and as directed. \nMake : CG Cat NO. DMLN1LT8-16 incl. LED T8 tubular lamp LTT8-16 or equivalent make as specified in list of makes.	BI01010001010000000000000515BI0100001206	2	Each\n
95	2.11	Supply, install, testing and commissioning 25 ltrs capacity energy efficient geyser vertical type ISI marked 240 volts , 50 Hz with inner stainless steel container, outer MS sheet enclouser withh glass wool insulation lining between inner SS container and outer enclouser including necessary fixtures fixed with 4 nos 16 mm dia , 150 mm long MS bolts , nuts with washers necessary drilling holes to walls fixed with wooden plugs and grouted in wall with cement mortar (1:3) making good the disturbed surfaces of walls with and including safety valve, non return valve of 15mm bore ISI marked with two number 10mm dia 300 mm long PVC flexible connection with chromium plated brass union one on each side for making flexible connection to geyser etc complete all as directed.Make-Havell's Puro Turbo or equivalent approved.	BI01010001010000000000000515BI0100001207	1	Each Job\n
96	2.12	S&F 250mm sweep exhaust fan modular type, ventlier model, 240 Volts, AC 50 Hz, with all accessories such as louvers, three core single core PVC insulated copper conductor of size 0.5 Sqmm from ceiling rose to fan, including cutting brick/ block walls for fixing of fan and finishing the cutting surfaces even and smooth as per existing, complete all as specified and as directed.Make-Havell's Cat No Ventil Air-DXWE or equivalent approved.	BI01010001010000000000000515BI0100001208	1	Each\n
97	2.13	Supply only FCBC/SMPS Power Plant 48V 50Amp complete all as specified and as directed.\n Make & Model - Dyna DY4700 or equivalent make as specified.	BI01010001010000000000000515BI0100001209	2	Each
98	2.14	Supply only Battery 12 Volt 100AH complete all as specified and as directed. Make- Exide /Luminous/Amaron or equivalent make as specified.	BI01010001010000000000000515BI0100001210	16	Each