Repair And Painting In Community Center At Hakikat Nagar Saharanpur
Tender Value
7.93 Lakhs
Estimated cost
Bid Submission
17 Sep 2019
0 days left
EMD
92000
Bank guarantee accepted
Document Fee
525
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
SDA Saharanpur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair And Painting In Community Center At Hakikat Nagar Saharanpur
BOQ
| Name of Work: Repair and Painting in Community Center at Hakikat Nagar, Saharanpur | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | A | |||
| 2 | 1.01 | Dismanlting existing plaster including disposal of refuse as directed by the Engineer-in-charge within a distance of 60 meter (200 feet) (SI No-706) | 422.14 | M2 | |
| 3 | 1.02 | 12 mm thick plaster with cement and fine sand of 1.25 fineness modulus in 1:4 over brick work minimum thickness plinth with cement and fine sand. SI-584. | 422.14 | M3 | |
| 4 | 1.03 | M-150 Brick work in1:6 cement & six fine sandof 1.25 F.M.mortar in super structure above plinth including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. SI-303+309+310 | 5 | M3 | |
| 5 | 1.04 | Cement concrete with 2cm. guage approved stone ballast, coarse sand & cement in the proportion of 1:2:4 including supply of all materials, labour, Tools & Plants etc. required for proper completion of the work. | 3 | M3 | |
| 6 | 1.05 | Finishing walls with weather coat Smooth extrerior paint of approved make and quality on new work with three coats to give an even shade inculding supply of all materials, labour, tools and plant etc. requried for proper complication of the work. (SOR N0- New item Painting & Distempering.) | 1410 | Sqm | |
| 7 | 1.06 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications, Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm.Item No.-13.48.1/DSR.-2018 | 1700 | Sqm | |
| 8 | 1.07 | Supply & Fixing 3.8 Cm. thick flush door shutter including supply and fixing of wooden cleats and stops and including fixing & adjustment of hinges, bolts, locks, handles spring and or other fittings but excluding their supply and including painting with two coats of black japan on all iron fitting if necessary including fixing the glass panes with putty for bradglass and glass to be 4 mm. thick.Fitting with necessary screws to be supplied by the deptt. ( SOR item no-471) | 30 | Sqm | |
| 9 | 1.08 | Sal wood wrought framed and fixed inculding simple mouldings straight work as in chaukhats inculding supply of all materials, labour, tools & plants etc. required for proper completion of the work. ( SOR item no-403) | 1 | cum | |
| 10 | 1.09 | Cost of I.S.I. marked oxidized fitting heavy quality with screws for doors, windows & ventilators etc. ( SOR item no-474) | 15 | Sqm | |
| 11 | 1.1 | Marble stone (Raj Nagar Plain) flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with (DSR_2016 11.23.2) | 50 | Sqm | |
| 12 | 1.11 | Providing and applying One coats of white cement based putty of average thickness 1 mm, of approved brand and manufacturer such as Berger/J.K./Birla or similar make, over the plastered wall surface to prepare the surface even and smooth complete. S.O.R. New Item./Painting & Distempering. | 3110 | Sqm | |
| 13 | 1.12 | Providing and fixing Glass panes 4mm thick with teak wood beading in doors and windows as directed by the Er.-in-charge. Including cost of all materials, fittings, hinges, labour,T&P. etc, required for proper completion of the work. ( SOR item no-9.04-N.I.) | 20 | Sqm | |
| 14 | 1.13 | Reparing of aluminium gate all complete as per direction of Engineer-in-charge | 2 | Each | |
| 15 | 1.14 | P/F white vetreous china flat back or wall corner type lipped front urinal basion of 430X260X350mm and 340X410X265 mm sizes ISI Marked Hindware or Equivalent respectively with 5 liter white P.V.C. automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever rquired. (SOR No-21.1B) | 2 | Each | |
| 16 | 1.15 | P/F PVC low level flushing cistern Hindware of Equivalent with manually controlled device (handle Lever) Confirming to IS :7231, with all fitiing and fixtures complete 10 litre capacity-coloured-white (SOR No-21b-6) | 6 | Each | |
| 17 | 1.16 | P/F White vitreous china wash basin Hindware or Equivalent including making all connections but excluding the cost of fitting complete as per direction Engineer-in-charge. (SOR N0-21b.8) ( Size 550X400mm) | 2 | Each | |
| 18 | 1.17 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete as per direction of Engineer-in-charge. 40mm dia (Flexible pipe) (SOR Item 21b-10d) | 10 | Each | |
| 19 | 1.18 | Providing and fixing C.P. brass bib cock of approved quality confirming to IS:8931 15 mm nominal bore (SOR Item 21b-18) | 10 | Each | |
| 20 | 1.19 | Providing and fixing C.P. brass long body bib cock of approved quality confirming to ISI standards and weighing not less than 690 gms.15mm nominal bore (SOR Item 21b-20) | 10 | Each | |
| 21 | 1.2 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make confirming to IS:8931. 15mm nominal bore. (SOR Item 21b-21) | 10 | Each | |
| 22 | 1.21 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality confirming to IS:8931 15mm nominal bore. (SOR Item 21b-22) | 10 | Each | |
| 23 | 1.22 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality Atul or equivalent) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (SOR Item 21b-11) | 10 | Each |
AI Tender Summary
Tender Timeline
Sep 06, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedSep 17, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 17, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender