Lala Lajpat Rai University Of Veterinary And Animal Sciences-LUVAS has published Providing And Fixing Modular Furniture For Various Labs At Ground Floor 1St Floor And 2Nd Floor Of Codst. Submission Date for this Tender is 19-09-2019. Moduler Furniture Tenders in Hisar Haryana. Bidders can get complete Tender details and download the document.
| Name of Work: Providing and Fixing Modular Furniture for Various labs at Ground Floor, 1st Floor and 2nd Floor of CoDST | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | NS items | BI01010001010000000000000515BI0100001112 | ||
| 2 | 1.01 | Laboratory Module 750 with C-Frame complete in all aspects :-\nProviding and Fixing Complete set C-Frame Modular Floor Storage Unit of Double door and single drawer with Cam lock: width 750mm x depth 530mm x height 635mm, Epoxy powerder 50-60micron coated 0.9mm metal sheet CRCA, cabinet frame 1.2mm thickness with 2 sets of SS/PP hinges, Drawer 0.9mm CRCA sheet, Hettich/Hafeil sliding channels and SS Door handles. 'C" Frames of Size D-700 x W-30 mm H-780 (Sitting) & H-890mm (Standing) Vertical Legs depending on as actual site requirements and SEFA10/SEFA8M requirements MOC CRCA/MS pipe with Phosphating pretreatement 'Connecting Sets CRCA 1.2mm, Epoxy powder coated 50-60micron, (4 pcs) of Size L-1500 mm for joining 'C' Frame Structure, Z Black Granite (Acid/Chemical Resistance)17 (±1) mm thick with high quality granite in jet black colour with pre moulded, pre polished edges, Edge moulding and V-grooving, shamphering The overhang of granite should be 30 mm – 50mm. at front side of under storage cabinets, Neoprene Strip (2.5'' wide & 6 mm thick) backing material for granite should be NEOPRENE fixing with SR-998 glue, As required the cover Panel End side panel for main unit, 600mm D, 900mm Ht. Epoxy powerder coated 0.9mm metal sheet virgin steel CRCA, cabinet frame 1.2mm thickness. Complete in all respect as directed and upto the entire satisfaction of Engineer in Charge. | BI01010001010000000000000515BI0100001113 | 310 | Nos. |
| 3 | 1.02 | Laboratory Leg Space 750mm with Back Cover Panel complete unit :\nProviding & Fuxug with SITC of Leg Space of L-750 with Back Cover Panel and Cross-base footrest, Epoxy powerder coated 0.9mm Back Cover Panel CRCA, Top Frame MS Pipe, 'Providing and Fixing Z Black Granite (Acid/Chemical Resistance)17 (±1) mm thick with high quality granite in jet black colour with pre moulded, pre polished edges, Edge moulding and V-grooving, shamphering The overhang of granite should be 30 mm – 50mm. at front side of under storage cabinets, Neoprene Strip (2.5'' wide & 6 mm thick) backing material for granite should be NEOPRENE fixing with SR-998 glue. Complete in all respect as directed and upto the entire satisfaction of Engineer in Charge. | BI01010001010000000000000515BI0100001114 | 133 | Nos. |
| 4 | 1.03 | Laboratory 750mm SS 316 Sink Module with acessories complete :\nProviding and fixing of Sink Storage unit of width 750mm, Depth 530 mm, ht of unit 635 mm with two shutters Epoxy powerder 50-60micron coated 0.9mm metal sheet CRCA, cabinet frame 1.2mm thickness with 2 sets of SS/PP hinges, and SS Door handles. Providing and Fixing Sinks and Accessories SS 316 food grade (Stainless Steel) Sinks Sinks-39 nos and Polypropylene Sinks (Drop-in) of overall size 548L x 398W x 235D (mm), (Black color) Classic timeless appearance in matt finish, non rusting and easy to maintain with bottle trap. -5 nos. (Drop-in) of overall size 548L x 398W x 235D (mm), non-rusting and easy to maintain with bottle trap. Waste Coupling For PP/Ceramic/SS Drop In Sink, Anti-Siphon bottle trap, Size : 38mm dia. (Black color) Serated Flexible connector to connect sink to the waste line, length 1mt. and 38mm dia. Serated Flexible connector to connect sink to the waste line, length 1mt. and 38mm dia. Providing and Fixing Water Faucets for Sink unit shall have 3 way (2 straight+1 swan neck) turn type water faucets made up of Brass with epoxy powder coating of minimum weight 1550 gm to 1600 gm. It should be PH and rust resistant. The switch valve cast to be made of ceramic that can avoid acid wear. The outlet produced in PVC, has detachable hose nozzles, allay pressure, changeable high-pressure outlet constructed or normal clean outlet control of water flow faucet immediately. Granite (Acid/Chemical Resistance)18 (±2) mm thick with high quality granite in jet black colour with pre moulded, pre polished edges, Edge moulding and V-grooving, shamphering The overhang of granite should be 30 mm – 50mm. at front side of under storage cabinets. Complete in all respect as directed and upto the entire satisfaction of Engineer in Charge. | BI01010001010000000000000515BI0100001114 | 34 | Nos. |
| 5 | 1.04 | Laboratory 600mm Module complete with accessories:\nProviding and Fixing Modular Floor Storage Unit of Double door and single drawer with Cam lock: width 600mm x depth 530mm x height 635mm, Epoxy powerder coated 0.9mm metal sheet CRCA, cabinet frame 1.2mm thickness with 2 sets of SS/PP hinges, Drawer 0.9mm CRCA sheet, Hettich/Hafeil sliding channels and SS Door handles, with Drawer padding, C" Frames of 'C" Frames of Size D-700 x W-30 mm H-780 (Sitting) & H-890mm (Standing) Vertical Legs depending on as actual site requirements. and SEFA10/SEFA8M requirements MOC CRCA/MS pipe with Phosphating pretreatement, Connecting Sets (4 pcs) of Size L-1200 mm for joining 'C' Frame Structure with 'Connecting Sets (4 pcs) of Size L-1200 mm for joining 'C' Frame Structure Providing and Fixing Z Black Granite (Acid/Chemical Resistance)18 (±2) mm thick with high quality granite in jet black colour with pre moulded, pre polished edges, Edge moulding and V-grooving, shamphering The overhang of granite should be 30 mm – 50mm. at front side of under storage cabinets. Complete in all respect as directed and upto the entire satisfaction of Engineer in Charge. | BI01010001010000000000000515BI0100001114 | 8 | Nos. |
| 6 | 1.05 | Laboratory 600mm SS316 Sink with accessories complete Unit :\nProviding and Fixing of Sink Storage unit of 600mm, Depth 530 mm, ht of unit 635 mm, ht of unit 635 mm with two shutters Epoxy powerder 50-60micron coated 0.9mm metal sheet CRCA, cabinet frame 1.2mm thickness with 2 sets of SS/PP hinges, SS Door handles. Providing and Fixing Sinks and Accessories Polypropylene Sinks (Drop-in) of overall size 548L x 398W x 235D (mm), (Black color) Classic timeless appearance in matt finish, non rusting and easy to maintain with bottle trap. Waste Coupling For PP/Ceramic/SS Drop In Sink, 'Anti-Siphon bottle trap, Size : 38mm dia. (Black color), Serated Flexible connector to connect sink to the waste line, length 1mt. and 38mm dia. Providing and Fixing Water Faucets for Sink unit shall have 3 way (2 straight+1 swan neck) turn type water faucets made up of Brass with epoxy powder coating of minimum weight 1550 gm to 1600 gm. It should be PH and rust resistant. The switch valve cast to be made of ceramic that can avoid acid wear. The outlet produced in PVC, has detachable hose nozzles, allay pressure, changeable high-pressure outlet constructed or normal clean outlet control of water flow faucet immediately. Providing and Fixing Z Black Granite (Acid/Chemical Resistance)18 (±2) mm thick with high quality granite in jet black colour with pre moulded, pre polished edges, Edge moulding and V-grooving, shamphering The overhang of granite should be 30 mm – 50mm. at front side of under storage cabinets. Complete in all respect as directed and upto the entire satisfaction of Engineer in Charge. | BI01010001010000000000000515BI0100001114 | 11 | Nos. |
| 7 | 1.06 | Laboratory Corner Module with accessories Complete Unit :\nCorner Modular Floor Unit corner module main unit, 850mm x depth 530mm x height 635mm Epoxy powerder coated 0.9mm metal sheet virgin steel CRCA, cabinet frame 1.2mm thickness Providing and Fixing Z Black Granite (Acid/Chemical Resistance)18 (±2) mm thick with high quality granite in jet black colour with pre moulded, pre polished edges, Edge moulding and V-grooving, shamphering The overhang of granite should be 30 mm – 50mm. at front side of under storage cabinets. Complete in all respect as directed and upto the entire satisfaction of Engineer in Charge. | BI01010001010000000000000515BI0100001114 | 1 | Nos. |
| 8 | 1.07 | Laboratory Double Reagent Shelf for Acids & Chemicals\nSingle Sided Reagent Shelf \n2-tier for Island benches, 1500 mm Length, 150mm Depth (660mm Ht.) above worktop. The end vertical panels should be 0.9-0.1mm & horizontal shelves of 0.9mm thick MS CRCA powder coated. The end vertical panels should be supported on PP Base support pieces of 300L x 37 W x 15mmH. The horizontal shelf should have provisions for fixing the electrical switches and sockets 6 Module plates and 6/16A Electrical sockets and switches With 2 cutouts for 6 module plates. The load carrying capacity of each Reagent shelf should be 30 kgs. Includes the electrical fitting cpmplete in all aspects (ANCHOR/LEGRAND/MK) 6 Module Plate 16A, 1way switch and 6/16A,6pin shutter Socket and suitable wiring. Complete in all respect as directed and upto the entire satisfaction of Engineer in Charge. | BI01010001010000000000000515BI0100001114 | 55 | Nos. |
| 9 | 1.08 | Laboratory Double Reagent Shelf for Acids & Chemicals\nProviding and Fixing Double Sided Reagent Shelf \n2-tier for Island benches, 1500 mm Length, 300mm Depth (660mm Ht.) above worktop. The end vertical panels should be 0.9-0.1mm & horizontal shelves of 0.9mm thick MS CRCA powder coated. The end vertical panels should be supported on PP Base support pieces of 300L x 37 W x 15mmH. The horizontal shelf should have provisions for fixing the electrical switches and sockets 6 Module plates and 6/16A Electrical sockets and switches With 2 cutouts for 6 module plates. The load carrying capacity of each Reagent shelf should be 30 kgs. Includes the electrical fitting complete in all aspects (ANCHOR/LEGRAND/MK) 6 Module Plate 16A, 1way switch and 6/16A,6pin shutter Socket and suitable wiring. Complete in all respect as directed and upto the entire satisfaction of Engineer in Charge.\n\n | BI01010001010000000000000515BI0100001114 | 8 | Nos. |
| 10 | 1.09 | FUME HOOD COMPLETE UNIT WITH ACCESSORIES\nFume Hood (with base) Extra Heavy Structure made of 1.6 mm frame & 1.2 mm CRCA body Over all Size L=1500mm, D=900mm, H=2300 mm consisting of following:\n1. Should complied to ASHRAE110:2016 AM or equivalent\n2. Fume Hood Upper Unit should be Epoxy Polyester Powder Coated and dimensions should be L=1500mm, D=940mm, H=1450mm.\n3. Fume Hood (Upper Unit) should have internal lining suitable for Acidic Fumes of Internal size L=1180mm, D=810mm, H=1220mm\n4. System should have Baffle at the back with 3 point suction system (for light, normal & heavy gases/ Fumes) for smooth exhaust of fumes.\n5. Should have Sash-vertical sliding 5 - 6mm thick toughened glass in a 50mm wide frame. Sash should slide on a pulley system and Sash should also have SS handles for operation.\n6. Should have for 6/16 amps single phase socket with 16 amps MCB, internal wiring, LED light, On-Off switch for Blower, tube light switch, ELCB for Safety Purpose\n7. Worktop should be Jet black Granite: 16-17mm dished work surface with 12mm thick ply backing having provision to fix Drip cup.\n8. UTILITY SERVICES – Should have remote valves on front fascia and spout on the inside wall. (All utility line shall be terminated at rear side on top /bottom of fume hood for further connection).\n9. Wet and Dry Service Utilities (as per DIN 12920 norms)\n10. Panel Mounting for Water, Gas, Vacuum, Nitrogen supplies in the fume hood should be standard along with gas valves and water faucet.\n11. Fume Hood Base cabinets should be C-Frame design with dimensions as L=1500mm, H=850mm x D-570mm + Frame of depth 900 mm\n12. Fume should be quoted with suitable blower wit branded motor drive system with 1400CFM to 1800CFM, body of fume Hood should be PP or FRP.\n13. Required chemical resistant ducting should be quoted with the system.\n14. Fume Hood must be quoted with apparatus holding grid.\n15. Base storage cabinets should be having the internal PP+FRP lining to avoid the corrosion.\n16. Door handles should be made of SS304/316.\nThe manufacturer must be ISO, BIFMA, OHSAS and SEFA-10 compliant. \nComplete in all respect as directed and upto the entire satisfaction of Engineer in Charge. | BI01010001010000000000000515BI0100001114 | 3 | Nos. |
| 11 | 1.1 | Chemical Storage Unit Complete with all accessories\nProviding and Fixing CHEMICAL STORAGE CABINETS as per following specifications:-\nMS Chemical Storage Cabinet \n1000 x 486 x 1800mm : 1.2mm thick made of CRCA with epoxy coating (60-70 micron). \nFour Door Cabinet with glass MOC : MS CRCA 1000mm W x 486mm D x 1800mm Ht. Inside must be polyprylene + Fiber reinforced plastic coatong 3mm quoting \nComplete in all respect as directed and upto the entire satisfaction of Engineer in Charge. | BI01010001010000000000000515BI0100001114 | 3 | Nos. |
| 12 | 1.11 | DUCT PP+FRP (polypropylene+ Fiber reinforced plastic) Complete\nPPFRP 14” Rigid duct with acessories for Fume Hoods: PP+FPR ducting with 3mm PP inner side and 3mm FRP outer side. Ducts should be 25 mm x 25 mm Stitch welding is done on inner surface and continuous welding on outer surface. While making the lining, there should not be any air pockets or any sort of uneven finish. The flange thickness should be 8mm. All flanges are to be matched with M8, GI fasteners and flat washers on both the sides. 90 degrees bend of 14 inches, U-clamps for Rigid Duct 14 inches, Flange 10mm thick round with fasteners PP+FRP for 14” duct, Hanging MS Support for Rigid Duct 14", Flexible Bellow for the blower, Raincowl for blower system, Inlet Transition for blower system, per Running meter cost should be mentioned. Complete in all respect as directed and upto the entire satisfaction of Engineer in Charge. | BI01010001010000000000000515BI0100001114 | 150 | RMT |
| 13 | 1.12 | SS Exhaust Hood unit with hood complete with ducting\nSS 316 Hood size 450x450mm with Exhaust CPVC 3"-4"ducting 6ft SS/PP Exhaust blower 1000CFM capacity, 1 hp motor capacity. Complete in all respect as directed and upto the entire satisfaction of Engineer in Charge. | BI01010001010000000000000515BI0100001114 | 7 | Nos. |
| 14 | 1.13 | Over Hood Glass Modular Cabinet complete\nProviding and fixing of Over hood storage cabinets width 600mm Depth 430mm Height 600mm size double door with glass and Epoxy powerder 50-60micron coated 0.9mm metal sheet CRCA, cabinet frame 1.2mm thickness, 2 set of Hettich/Haffel hinges, SS Door handles, CRCA shelf 0.9mm. Complete in all respect as directed and upto the entire satisfaction of Engineer in Charge. | BI01010001010000000000000515BI0100001114 | 71 | Nos. |
| 15 | 1.14 | SS 316 1/4" Gas tubing Fittings complete\nProviding and fixing of SS 316 ¼” size gas tubing with hanging clamp support complete as directed and up to the satisfaction of engineer incharge | BI01010001010000000000000515BI0100001114 | 500 | RMT |
| 16 | 1.15 | SS 304 Cylinder Manofold Gas Fittings\nProviding and fixing of SS 304 Cylinder Manifold with pigtail, MS cylinder mounting bracket complete as directed and up tothe satisfactin of Engineer in charge. | BI01010001010000000000000515BI0100001114 | 10 | Nos. |
| 17 | 1.16 | SS 316 T-Joint connectors Gas Fittings\nProviding & Fixing SS 316 T-Joint connectors complete as directed and up to the satisfaction of Engineer in Charge | BI01010001010000000000000515BI0100001114 | 150 | Nos. |
| 18 | 1.17 | Control Valve Box with pressure gauge meter Gas Fittings\nProviding & Fixing Control Valve Box with pressure gauge meter complete as directed and up to the satisfaction of Engineer in Charge. | BI01010001010000000000000515BI0100001114 | 15 | Nos. |
| 19 | 1.18 | SS 316 Needle Valves for ¼” with SS connector and fitting Gas Fittings\nProviding & Fixing SS 316 Needle Valves for ¼” with SS connector and fitting complete as directed and up to the satisfaction of Engineer in charge | BI01010001010000000000000515BI0100001114 | 30 | Nos. |
| 20 | 1.19 | 3 Stage Purification Panel Gas Fittings complete\nProviding & Fixing 3-stage purification panel with control valves with pressure gauge (for N2, Argon, Helium, Hydrogen gas) complete as directed and up to the entire satisfaction of Engineer in charge | BI01010001010000000000000515BI0100001114 | 4 | Nos. |
| 21 | 1.2 | LPG line SS 1/2" with connector & Bunsen burner assembly\nProviding and fixing of LPG line with with SS 316 1/2" tubing, Hangin clamp support, Argon welding of joints, parallel line for each lab from cylinder bank, LPG Gas regulartor manifold, bunsen Burners with flame control and on –off facility with brass construction and powder coated base 13mm brass pipe, LPG brass manifold for cylinders, complete as directed and up to the entire satisfaction of Engineer in Charge. | BI01010001010000000000000515BI0100001114 | 250 | RMT |
| 22 | 1.21 | Gas Cylinder\nFilled Gas Cylinder 47lt capacity ea with valve of analytical grade purity 99.999& pure for H2, He, N2, O2, Zero Air, Argon, MS cylinder bank with priming coat and water proof paint dual coat. Firesaftey certificate, Purity certificate must be attached. Complete in all respect as directed and upto the entire satisfaction of Engineer in Charge. | BI01010001010000000000000515BI0100001114 | 12 | Nos. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
