Improvement Of Road Walana Mannaspimpri Guglpimpri Bhgwati Connceting To Mdr 30 Part Of Gugalpimpri Km 0/00 To 1/00 Tq . Sengaon Dist . Hingoli
Tender Value
44.99 Lakhs
Estimated cost
Bid Submission
11 Sep 2019
0 days left
EMD
45000
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sengaon → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Improvement Of Road Walana Mannaspimpri Guglpimpri Bhgwati Connceting To Mdr 30 Part Of Gugalpimpri Km 0/00 To 1/00 Tq . Sengaon Dist . Hingoli
BOQ
| Name of Work : Improvement of road Walana Mannaspimpri Guglpimpri Bhgwati connceting to MDR 30 Part of Gugalpimpri KM 0/00 to 1/00 Tq. Sengaon Dist. Hingoli | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Item.No.1) Excavation for road way in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. (SSR 2019-2020 I.No. 2.11 P.No.29 | BI01010001010000000000000515BI0100001113 | 810 | CuM |
| 2 | 2 | Item NO.2) Supplying trap/granite/quartizte/gneiss stone metal of requried size by bringing the boulders Rubble at the road side breaking them to required gradation incluidng conveying the boulders/ Rubble and stacking the broken metal etc complete.(Prior approval of sample stack of broken metal by the Ex.Engineer is necessary the date of approval will form part of the measurement) a) 80mm metal, By Boulders ( Hand Broken) (SSR 2019-2020 Item.No. 50.56 P.No. 442) | BI01010001010000000000000515BI0100001114 | 252 | CuM |
| 3 | 3 | Item.No.3) Supplying trap/granite/quartzite/gneiss stone metal of required size by bringing the boulders / Rubble at the road side breaking them to required gradation including conveying the boulders /Rubble and stacking the broken metal etc. complete . (Prior approval of sample stack of broken metal by the Ex. Engineer is necessary the date of approval will form part of the measurements) a)40 mm Metal, By breaking Boulders (Hand broken). (SSR- 2019-2020 I.No.50.57) | BI01010001010000000000000515BI0100001115 | 126 | CuM |
| 4 | 4 | Item No 4) Supplying hard murum/ kankar at the road site, including conveying and stacking complete. (SSR 2019-2020 I.No. 2.29 (a) Page N0.31) | BI01010001010000000000000515BI0100001116 | 444 | CuM |
| 5 | 5 | Item.No.5) Supplying soft murum at the road site, including conveying and stacking complete. (SSR-2019-2020 I.No. 2.29b) | BI01010001010000000000000515BI0100001117 | 42 | CuM |
| 6 | 6 | Item No.6) Spreading 80mm to 40mm metal for road work including sectioning etc complete. as directed by Engineer in charge. (SSR 2018-2019 Item.No. 50.58 P.No. 442) | BI01010001010000000000000515BI0100001118 | 378 | CuM |
| 7 | 7 | Item No.7) Spreading hard murum/kanker at the road side including conveying and stacking complete. Item.No. 2.29 (a) P.No. 31. | BI01010001010000000000000515BI0100001119 | 486 | CuM |
| 8 | 8 | Item No.8) Compacting the subgrade / gravel oversize metal (200mm loose) layers for all with power roller having weight 8 to 10 M.T. including necessary, labour materials and artificial watering complete. Item.No. 50.59 P.No. 442) | BI01010001010000000000000515BI0100001120 | 1260 | Sq.M |
| 9 | 9 | Item.No.9) Compacting the sub grade / gravel / size metal (100 mm loose) layers for all widths with Power roller having weight 8 to 10 MT. including necessary, labour, materials and artificial watering complete. (SSR-2019-2020 I.No.50.61)\n | BI01010001010000000000000515BI0100001121 | 1260 | Sq.m |
| 10 | 10 | Item.No.10) Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) (SSR-2019-2020 I.No.24.01) | BI01010001010000000000000515BI0100001122 | 120 | CuM |
| 11 | 11 | Item.No.11) Providing and laying in situ / ready mix M-20 cement concrete of trap /granite /quartzite /gneiss metal for approach slab / Rigid pavement including compacting, finishing, curing etc. complete. (excluding reinforcement) (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ), cement 6.40 bags/cumt) ( SSR 2019-2020 I.No. 11.25) | BI01010001010000000000000515BI0100001123 | 180 | CuM |
| 12 | 12 | Part- B- Drain work Item.No.12) Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means (SSR 2019-2020 I.No. 21.02) | BI01010001010000000000000515BI0100001124 | 561.6 | CuM |
| 13 | 13 | Item.No.13) Providing rubble filling of trap/ granite/ quartzite gneiss stones for foundations including filling voids with sand/grit and compaction etc complete. (SSR 2019-2020 I.No. 11.01) | BI01010001010000000000000515BI0100001125 | 86.4 | CuM |
| 14 | 14 | Item.No.14) Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) (SSR-2019-2020 I.No.24.01) | BI01010001010000000000000515BI0100001126 | 43.2 | CuM |
| 15 | 15 | Item.No.15) Providing and laying in situ / ready mix M-15 plain cement concrete of trap /granite/quartzite/ gneiss metal for cast in citu piers, abutment, returns, wings etc. including provision of \"V\" shaped false joints to form suitable panels on the faces to approve design with compacting by vibrating and curing complete, including plywood/steel form work centering ( excluding dewatering by means of pump) and including bailling out water and curing finishing in CM 1:3 etc. complete. as directed by engineer in charge basic rate shall be increased for height above 5.00 m in followinh manners \n(a) Height upto 5 M. (With Concrete Mixer)With fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ) \ni) Height up to 5 m, normal rate. \nii) Height 5 to 7.50 m, add 5 percent extra over basic rate. iii) Height 7.50 to 10 m, 7.50 percent extra. \niv) Over 10 m Height, add 10 percent extra for every 2.50m rise. (SSR 2019-2020 I.No. 17.38) | BI01010001010000000000000515BI0100001127 | 118.8 | CuM |
| 16 | 16 | Item.No.16) Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. (SSR 2019-2020 26.33) | BI01010001010000000000000515BI0100001128 | 1.78 | M.T |
| 17 | 17 | Item.No.17) Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 600mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. (SSR 2019-2020 I.No. 11.09) | BI01010001010000000000000515BI0100001129 | 10 | Rg.m |
| 18 | 18 | Item.No.18) Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 900mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. (SSR 2019-2020 I.No. 11.11) | BI01010001010000000000000515BI0100001130 | 10 | Rg.m |
| 19 | 19 | Item No.19) Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge (SSR 2019-2020 I.No. 6.36 ) | BI01010001010000000000000515BI0100001131 | 1 | No |
| 20 | 20 | Item No.20) Add Royalty charges etc complete \nStatement attached seperetly | BI01010001010000000000000515BI0100001132 | 1336.64 | CuM |
| 21 | 21 | Item No .21) Provoding Quality Control Test 80mm metal Sive Analysis | BI01010001010000000000000515BI0100001133 | 1 | No |
| 22 | 22 | 80mm metal ( Water obsrtion/ Inpcat value) | BI01010001010000000000000515BI0100001134 | 1 | No |
| 23 | 23 | murum Sive Analysis | BI01010001010000000000000515BI0100001135 | 2 | No |
| 24 | 24 | Murum (Liquied Lmit/ Plastic limit) | BI01010001010000000000000515BI0100001136 | 3 | No |
| 25 | 25 | C.C.M-10 (Compressive Strength of C.C. Cub | BI01010001010000000000000515BI0100001137 | 3 | No |
| 26 | 26 | C.C.M-20 (Compressive Strength of C.C. Cub | BI01010001010000000000000515BI0100001138 | 3 | No |
| 27 | 27 | Rubble filling Sive Analysis | BI01010001010000000000000515BI0100001139 | 1 | No |
| 28 | 28 | C.C.M-10 (Compressive Strength of C.C. Cub) | BI01010001010000000000000515BI0100001140 | 2 | No |
| 29 | 29 | C.C.M-15 (Compressive Strength of C.C. Cub) | BI01010001010000000000000515BI0100001141 | 2 | No |
| 30 | 30 | Steel T.M.T. Bar | BI01010001010000000000000515BI0100001142 | 1 | No |
| 31 | 31 | Add 1% Insurace | BI01010001010000000000000515BI0100001143 | 1 | No |
| 32 | 32 | Add 12 % GST Charges on | BI01010001010000000000000515BI0100001144 | 1 | No |
AI Tender Summary
Tender Timeline
Sep 05, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedSep 11, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 12, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender