Construction Of One Class Room School Building At Navegaon Bhujla Tq Mul
Tender Value
11.62 Lakhs
Estimated cost
Bid Submission
11 Sep 2019
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
MUL → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of One Class Room School Building At Navegaon Bhujla Tq Mul
BOQ
| Name of Work: C/O ONE CLASS ROOM SCHOOL BUILDING AT NAVEGAON BHUJLA TQ MUL,Dist Chandrapur T.S. NO. 90/R12/PO3/DPC-3EDU/2019-20 RS 1375400/- | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Item No. 1 : Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) Bd.A.1 Page No. 259 | BI01010001010000000000000515BI0100001113 | 55.6 | cum |
| 2 | 2 | Item No. 2-Providing soling using 80 mm size granite / quartzite / gneiss / trap metal in 15 cm. layer including hand packing filling voids with sand / grit, ramming, watering etc complete. ( Including Royalty) Spec. No. : As directed by Engineer-in-charge | BI01010001010000000000000515BI0100001115 | 15.02 | cum |
| 3 | 3 | Item No. 3 -Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Bd. E. 1 Page No. 287 | BI01010001010000000000000515BI0100001116 | 12.14 | cum |
| 4 | 4 | Item No. 4 : Providing and laying in situ cement concrete of required grade of trap / granite/ quartzite / gneiss metal for R.C.C. work in foundations like raft, grillages, strip foundations and footings of R.C.C.columns and steel stanchions including bailing out water, plywood/steel formwork, compaction, curing and roughening the surface if special finish is to be provided, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give smooth and even surface etc. complete. (Excluding reinforcement and structural steel, including cover block) The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed) 2/BD.F/3,P NO-13] Bd.F.3 Page No. 298 and B.7, Page No.38 | BI01010001010000000000000515BI0100001117 | 5.9 | cum |
| 5 | 5 | Item No.5-Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Bd.F.5 Page No. 300 and B.7, Page.No. 38 | BI01010001010000000000000515BI0100001118 | 5.17 | cum |
| 6 | 6 | Item No. 6 :-Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Bd.F.6 Page No. 300 and B.7, Page No.38 | BI01010001010000000000000515BI0100001119 | 7.01 | cum |
| 7 | 7 | Item No. 7 :-Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and rougheningthem if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand | BI01010001010000000000000515BI0100001120 | 0.257 | cum |
| 8 | 8 | Item No. 8:- Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Bd.F.8 Page No. 302 and B.7, Page No.38 | BI01010001010000000000000515BI0100001121 | 7.62 | cum |
| 9 | 9 | Item No. 9:- Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Bd.F.9 Page No. 303 and B.7, Page No.38 | BI01010001010000000000000515BI0100001122 | 0.57 | sqm |
| 10 | 10 | Item No. 10 :-Providing and laying cement concrete flooring 40 mm thick with M15 cement concrete laid to proper level and slope in alternate bays including compaction, filling joints, marking lines to give the appearance of tiles of 30 cm x 30 cm or other size laid diagonally/ square etc finishing smooth (with extra cement) in any colour as directed and curing etc. complete. With Crushed Sand.Bd.M.7 Page No. 383 | BI01010001010000000000000515BI0100001123 | 13.71 | cum |
| 11 | 11 | Item No. 11 :-Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. As director by engineer in charge and BDG- 2 and 5 | BI01010001010000000000000515BI0100001124 | 5.442 | cum |
| 12 | 12 | Item No. 12 :-Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. CompleteAs director by engineer incharge and BDG- 2 and 5 | BI01010001010000000000000515BI0100001125 | 16.18 | cum |
| 13 | 13 | Item No. 13- Filling in plinth and flooRs. with contractoRs. approved material / murum / stone dust in 15cm. to 20cm. layeRs. including watering and compaction complete.( Including Royalty) [8/BDA/11,P NO-4] Spec. No. : Bd.A. 11/Page No. 263 | BI01010001010000000000000515BI0100001126 | 53.24 | cum |
| 14 | 14 | Item No. 14 :-Providing and fixing M.S. grill door 24 kg/sqm of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting etc As directed by | BI01010001010000000000000515BI0100001127 | 2.1 | sqm |
| 15 | 15 | Item No. 15 :-Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia. bars 3 Nos. And stirrups @250 mm c/c and fixing in wall with 6 Nos of hold fast of 12 mm dia bars 500 mm long ncluding primer and oil painting etc, complete) frame size 60 mm x 100 mm . | BI01010001010000000000000515BI0100001128 | 11.76 | Rmt |
| 16 | 16 | Item No. 16 :- Providing and fixing Country cut teak wood single leaf panelled door shutter without anlight and 25mm thick as per drawing consisting of T.W. top rail size 100mm x 25mm and bottom lock rail 200mm x 25mm insert pannel 12 mm thick commercial ply faced T.W. particle board with phenol formaldehyde synthetic resin (Generally confirming to ISI 3097) excluding frame, including stainless steel fixture and fastening and T.W. beading to junctions of panelled inserts and as instructed by the Engineer in charge including 3 coats of oil painting etc.\ncomplete.\n | BI01010001010000000000000515BI0100001129 | 4.2 | sqm |
| 17 | 17 | Item No. 17 :Providing and fixing inposition .(asperI.S.1868/1982) Aluminium sliding window of two track swith rectangular pipe having over all dimension ? 63.50x38.10x1.02 mm at weight 0.547kg/Rmt. and window frame bottom track section 61.85x31.75x1.20mm at weight 0.695kg/Rmt. To p and side track section 61.85x31.75x1.30mm at weight 0.659kg/Rmt. The shutter should be of bearing bottom 40x18x1.25mm at weight 0.417kg/Rmt. Interlocking section 40x18x1.10mm at weight 0.469kg/Rmt .And hand le section 40x18x1.25mm at weight 0.417kg/Rmt. and top section 40x18x1.25mm at weight0.417kg/Rmt .As per detailed drawing sand a sdirected by Engineerinc harge with all necessary Aluminium sections fixture sand fastening ssuchasrollerbearinginnyloncastingandselflockingcatchfittedinverticalsectionofshutterincluding5mmthickplainglasswithallrequiredscrewsandnutsetc,complete.Withpowdercoatingwithout box | BI01010001010000000000000515BI0100001130 | 7.2 | SQM |
| 18 | 18 | Item No. 18 :- Providing & fixing mild steel grill work for window etc. 20kg /sqm as per drawing oil painting etc. complete….. | BI01010001010000000000000515BI0100001131 | 17.95 | sqm |
| 19 | 19 | Item No. 19 :- Providing internal cement plaster 12 mm thick in a single coat in cement mortar 1:4 to concrete or brick surface in all positions including scaffolding and curing complete. Providing groove at joint of B.B.Masonry and concrete members complete. [2/BDL/2B,P NO-36] Spec.No.: Bd.L.2/Page No.368 | BI01010001010000000000000515BI0100001132 | 145.36 | sqm |
| 20 | 20 | Item No. 20:-Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. | BI01010001010000000000000515BI0100001133 | 110.95 | sqm |
| 21 | 21 | Item No. 21 :-Providing cement patta / band of 2.50 cm width on either side of edges of plaster for doors and windows including scaffolding\n,finishing, curing etc. complete. | BI01010001010000000000000515BI0100001134 | 22.56 | Rmt |
| 22 | 22 | Item No. 22 :-Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the unction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire\netc. complete. | BI01010001010000000000000515BI0100001135 | 102.3 | sqm |
| 23 | 23 | Item No. 23 :-Providing and applying putty to old plastered surfaces in two coats to receive approved aint in all positions including all aterials,labour scaffolding and curing etc. complete | BI01010001010000000000000515BI0100001136 | 145.36 | sqm |
| 24 | 24 | Item No. 24:-Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete. NOTE: For Item No. 15 to 18 prior approval of Superintending Engineer will be necessary | BI01010001010000000000000515BI0100001137 | 110.95 | sqm |
| 25 | 25 | Item No. 25 :-Providing and applying plastic emulsion paint of approved quality ,colour and shade to old and new surfaces in two coat sincluding scaffolding,preparingthesurface.(excludingtheprimercoat)etc.complete. | BI01010001010000000000000515BI0100001138 | 145.355 | sqm |
| 26 | 26 | Item No. 26 :-Providing and fixing in position TMT-FE-500bar reinforcement of various diameters for R.C.C.pilecaps,footings,foundations, slabs,beamscolumns,canopies,staircase,newels,chajjas,intelspardis,copings,fins,archesetc.asperdetaileddesigns,drawingsandschedules.includingcutting,bending,hooking thebars,bindingwithwiresortackweldingandsupportingas required complete. | BI01010001010000000000000515BI0100001139 | 2.42 | MT |
| 27 | 27 | Item No. 27 -Providing and fixing black kadappa stone as shelves 25mm. thick machine polished, extending the polish upto 20 cm width on lowerside, rounding corners, laying in position jointing with bedding cement mortar 1:4 proportion curing etc etc. complete. | BI01010001010000000000000515BI0100001140 | 6.41 | sqm |
| 28 | 28 | Item No. 28 :- Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) | BI01010001010000000000000515BI0100001141 | 4 | cum |
| 29 | 29 | Item No. 29:-Providing and applying one coat of flat oil paint of approved colour and shade to internal / external plastered surfaces including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete. | BI01010001010000000000000515BI0100001142 | 7.5 | sqm |
| 30 | 30 | Item No. 30 :-Providing and applying two coats of Synthetic enamel paint of approved colour to new /old structural steel work and wood\nwork in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc.\ncomplete. | BI01010001010000000000000515BI0100001143 | 27.25 | sqm |
| 31 | 31.01 | Item No. 31 :- Providing and laying chequered tiles of pproved quality of size 30 cm x 30 cm, onfirming to corresponding I.S. for flooring\nin required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. | BI01010001010000000000000515BI0100001144 | 11.28 | sqm |
| 32 | 32.01 | Item No. 32:-Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. a) Flooring | BI01010001010000000000000515BI0100001145 | 45.445 | sqm |
| 33 | 33.01 | Item No. 33-Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.b) Skirting | BI01010001010000000000000515BI0100001146 | 3.93 | sqm |
| 34 | 34 | Item No. 33-Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every third ourse, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete. | BI01010001010000000000000515BI0100001147 | 25.11 | sqm |
| 35 | 35 | Providing and laying in trenches 15 mm dia. medium grade having embossed as ISI Mark galvanised iron pipes of 1.25 kg/meter necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint, 2 coats I | BI01010001010000000000000515BI0100001148 | 15 | RMT |
| 36 | 36 | Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete | BI01010001010000000000000515BI0100001149 | 5 | NO |
| 37 | 37 | Providing and fixing on walls/ ceiling/ floors, 15 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 1.48 Kg/metre with necessary fittings. remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. | BI01010001010000000000000515BI0100001150 | 15 | NO |
| 38 | 38 | Providing and fixing on walls/ ceiling/ floors, 32 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 3.89 Kg/meter with necessary fittings . remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. | BI01010001010000000000000515BI0100001151 | 10 | NO |
| 39 | 39 | Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters | BI01010001010000000000000515BI0100001152 | 1000 | NO |
| 40 | 40 | Providing and fixing P.V.C .Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7mm confirming to I.S.13592- 1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings,suchas,offsets,shoes,inluding fixing the pipe on wall using approved wood encleat sprojecting 25mm to 40mm from face of wall afixing with clips of approved quality and number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipe son C.C. or masonry blocks ,including necessary scaffolding and maintenance for 3yrs forany leakages or dislocations of pipes. Allthe P.V.C. itting sand additional 2 piece socket clips shall be got approve df romeng ineerinchargeetc.complete. | BI01010001010000000000000515BI0100001153 | 15 | NO |
| 41 | 41 | Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick-bats. | BI01010001010000000000000515BI0100001154 | 3 | NO |
| 42 | 42 | Providing and fixing 40mm diameter and 1.5mm thick Stainless steel hand railing in S.S.304 Grade including fabricating ,fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete | BI01010001010000000000000515BI0100001155 | 5.93 | RMT |
| 43 | 43 | Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of\nZinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced\nM.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60\ncm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge.MORTH 801 | BI01010001010000000000000515BI0100001156 | 1 | PER ONE NUMBER |
AI Tender Summary
Tender Timeline
Sep 05, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedSep 11, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 12, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender