Renovation Of 3 Nos Cross Regulator Canal Gates At Ch 114 , 277 Of Sbc Its Hoisting Equipments And Its Embedded Parts Including Rubber Seal Change , Painting , Trunion Maintenance Under Block Ps Indpur , District-Bankura
Tender Value
10.52 Lakhs
Estimated cost
Bid Submission
17 Sep 2019
0 days left
EMD
21055
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Indpur → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Renovation Of 3 Nos Cross Regulator Canal Gates At Ch 114 , 277 Of Sbc Its Hoisting Equipments And Its Embedded Parts Including Rubber Seal Change , Painting , Trunion Maintenance Under Block Ps Indpur , District-Bankura
BOQ
| Name of Work: Renovation of 3 nos cross regulator canal gates at Ch 114, 277 of SBC its hoisting equipments and its embedded parts including rubber seal change, painting, trunion maintenance under Block & PS Indpur, District-Bankura | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Cost for supply of new reduction gear box ,Make- New Allenberry Works , SUMA 7 Series Worm gear reducer , ratio = 50:1/70:1 Size=7\" at 750 RPM, out- put shaft extended up to=250 mm and input shaft extended up-to 80mm with key way cutting . | 50 | 2 | Nos |
| 2 | 2 | Cost for supply of new MS pedestal for fitting fixing of hoisting arrangement of necessary steel material including fabrication through cutting, straightening, welding, drilling cost of material as per drawing to complete the job as per direction of E.I.C | 51 | 2 | Nos |
| 3 | 3 | Cost for manufacturing and supply of Cast iron(FG200) rope-drum having P.C.D=225 mm, over all length =170 mm, ID=61 mm and flange 12 mm thick each side, thickness of drum under rope = 50 mm,keyway cutting at both end of the ropedrum, two nos keyway at each end having depth of keyway groove=10 mm each complete as per direction of E.I.C. | 52 | 90 | Kg |
| 4 | 4 | Cost for supply of cast steel plumber block required for effective ID between 66-75 mm ( excluding - 6mm thick gun metal bush fitted inside of plumarblock ) of complete in all respect as per direction of E.I.C. | 54 | 2 | Nos |
| 5 | 5 | Cost for manufacturing and supply of manual operating handle as per drawing . Effective crank radious =350 mm including painting. | 55 | 2 | Nos |
| 6 | 6 | Cost for supply & fitting fixing Locking arrangemnt at site through poul and rachet mechanism to resist sudden downward movement of gate as per Drawing and direction & satisfaction of EIC. | 56 | 2 | Nos |
| 7 | 7 | Cost for supply and filling of H.P Gear Oil 140 grade in new Double reduction gear box to complete the job up to satisfaction of E.I.C . | 57 | 10 | Ltr |
| 8 | 8 | Cost for assembling charges(SL No 1.03-1.07) of Gear box,Rope drum,Pedestal structure,Plumber block,Gunmetal bush etc including necessary material manpower & up to satisfaction of E.I.C | 58 | 2 | Job |
| 9 | 9 | Supply at site including handling, stackingetc. Of steel wire rope 16mm dia. & 6/36 construction fibre main core conforming to IS : 2266/2002. | 59 | 45 | Mtr |
| 10 | 10 | Dismentling of existing old & damaged steel wire rope from gate shutter and rope drum by using gass cutter,labour,scaffolding,T&P etc & fitting-fixing the new rope including 9 nos G.I U Clump,3Nos G.I Thimble,G.I socket l=150mm D=25 mm,D clump,15mm dia l=125mm S.S nut & bolt,Breaging with brash (new steel wire rope) by using gass set & Labour,T&P etc. | 60 | 3 | Job |
| 11 | 11 | Supply of Gunmetal bush for new gear box extended shaft & trunion as per requirement site. | 61 | 4 | Kg |
| 12 | 12 | Special repairing and fitting fixing of Trunion assembly including trunion bush,lock pin etc after removing from existing position & carrying them to working place (in a specified lead & lift) including cost of labour charges, cost of oxy-acetylene gas, hire charges of cylinders & gas cutter set, hire charges of T&P, hire charges of any special lifting devices or any other necessary equipments, lifting & handling charges, scaffolding charges,dismentling & Refetting etc. to complete the job at site as per direction of E.I.C. | 62 | 8 | Job |
| 13 | 13 | Replacement of seal beam including Concreating cutting (size-400mmx300mmx 3m) and supply of material and fabrication of embeded parts i.e. bottom seal size ISMC 150 and ISA 40x40 with proper anchoring at an interval of 0.3 mtr. fercated at one end by welding. cost including fitting & fixing of new seal beam with cement concrete (1:1.5:3) in proportion & proper alignment incl. plastering upto satisfaction of E.I.C. (Bottom ) | 63 | 3 | Mtr |
| 14 | 14 | Supplying & fitting fixing of new Structural steel. guide path of radial type cross regulator canal gate by Structural steel. plate of size 10 mm. thick x 6\" width x length 9' - 6\" of above along with anchor of St. steel. angle of size 40 mm. x 4 mm. x 150 mm at 1\" - 0\" space interval in jig jag way welded at one end and other end connected with insert ptale through fastner with prior necessary civil work of cement concreting 1:1.5:3 in proportion with proper alignment including plasting etc. after dismantling the old, damaged guide path from its existing position. The cost includes dismantling charges of guide path from its existing concrete structure, supply of all steel material, cost of related concreting by supplying sand, cement, stone etc. labours, material handing, transportation, scaffolding, hire charges of T&P etc. to complete the job at site as per direction of E.I.C(Side Guide Path) | 64 | 15 | Mtr |
| 15 | 15 | Dismantling all types of plain cement concrete\nworks, stacking serviceable materials at site and\nremoving rubbish as directed within a lead of 75\nm. above 150 mm. Thick | 65 | 2 | M^3 |
| 16 | 16 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. With local hard blackstone variety chips (crusher broken) | 66 | 2 | M^3 |
| 17 | 17 | Replacing skinplate, channels, anglesetc. only of draw/flap shutter including cutting the old skin plate,channels,angles etc.as necessary inr equired shape and replacing the old one by new plate, channels, angles etc.including runing welding and tag welding where necessary including removing rust from existing frame by chipping, emery clothingthe surface and painting with two coats of redlead primeras per direction of the Engineer-in-charge complete. | 67 | 1037.16 | Kg |
| 18 | 18 | Dismentling of existing old & damaged Dy gate ( size upto 4sqmtr) lead screw,pedestal wheel ,runner by using gass cutter,labour,scaffolding,T&P etc & fitting-fixing the same (new Dy gate, lead screw, pedestal wheel) by using weldingGenerator,Welding set & Labour,T&P etc. upto the satisfaction of EIC(Including gate & Hoisting) | 68 | 6 | Job |
| 19 | 19 | Cost for supply and delivery of lifting wheel of Dia=570mm,made from 25mm rod,3nos spoke of each length 200mm. With M.S.hub and G.M. internal 2 TPI square thread bush of OD=63.5MM,ID=36mm x L=75mm,with lock pin fixing into the wheel body centre and wheel base fitted with thrust bearing completed by M.S.wheel , G.M nut &thrust plate as per sample or drawing. up to the satisfaction of E.I.C ( | 69 | 6 | Nos |
| 20 | 20 | Cost for supplying screw rod of bright steel (EN-8) round of 50 mm dia and of required length threaded by 2 TPI and providing with a drilling hole of required dia on the other and after flattened and supplying with one no bolt and nut of required size and all other components as required including painting by one coat of red oxide primer as per sample or drawing up to the satisfaction of E.I.C. length 1.828 mtr per screw rod Appropriate fitted with abive lifting wheel L=1.82mtr/Each ( Rate taken from App.Schedule No-137 of 2017-18 of SE M&E) | 70 | 10.92 | Mtr |
| 21 | 21 | Cost for supply of C.I. Nut of lifting wheel with internal square thread of 2 TPI, of size OD = 100 mm. x L = 125 mm., ID = 27.25 mm. with proper shaping to accommodate the flange of top runner | 71 | 4 | Nos |
| 22 | 22 | Cost for supplying screw rod of bright steel (EN-8). round of 37 mm. dia and of required length threaded by 2 TPI and providing with a drilled hole of required dia on the other end after flattened and supplying with one no. bolt and nut of required size and all other components as required including painting by one coat of red oxide primer upto the satisfaction of EIC. length 1.828 mtr per screw rod Appropriate fitted with abive lifting wheel Quantity=20 nos screw rod =1.82x10=18.2mtr | 72 | 7.4 | Mtr |
| 23 | 23 | Supplying & fitting fixing of new Neoprene rubber seals (flat type) conforming to IS: 11855-1986 and sectional size specified below. Fixing with suitable size nuts, bolts & washers after removal of the old damage rubber seals from the gate by chiseling and where ever necessary by gas cutting etc.without damage to the gate body. The cost including all cost of materials, labour charges, scaffolding, hire charges of T&P, cost of drilling holes on new rubber seal & m.s. flat, carriage & transportatiion etc. to complete the job at site as per direction of E.I.C. | 73 | ||
| 24 | 23.01 | Bottom seal 63.5 mm. width x 12 mm thick, but with clampplate (30mm x 8 mm tk) G.I. nuts & bolts size 8mm dia x 2.5\" long | 74 | 9 | Mtr |
| 25 | 23.02 | Side seal 70 mm. width x 8 mm thick, with m.s. clamp plate (i.e. m.s. Flat 30mmx8mm tk)G.I nuts & bolts size 8mm dia x 2.5\" long . | 75 | 15 | Mtr |
| 26 | 24 | Cost for removing of old paint, rust, foreign contaminants etc. from dismentalled gate shutter, hoisting arrangement,electrical panal,pipes by scrapping, cleaning, rubbing, chipping by any means & preparing the surface to receive new coat of paint. The cost including cost of materials, labours, etc. to complete the job at site as per direction of E.I.C. | 76 | 126.72 | Sqmtr |
| 27 | 25 | Cost for supplying & application of Primer with Epilux - 610 Primer Grey of approved brand on cleaned surface of dismentelled gate shutter,panel box including thinner Epilux - 844 brush & other materials as required, labours, brush, compressor, painting equipments etc. to complete the work at site as per direction of E.I.C For 1st coat of Primer ( Epilux-610) ( Manual painting) | 77 | 126.72 | Sqmtr |
| 28 | 26 | Cost for supplying & application of Paint with Epilux - 5 coal tar epoxy of approved brand on cleaned surface of dismentelled gate shutter, panal, pipe including thinner Epilux - 844 brush & other materials as requiored, labours, brush, compressor, painting equipments etc. to complete the work at site as per direction of E.I.C.. | 90 | ||
| 29 | 26.01 | For 1st coat paint(Epilux-5) over 1st coat primer. | 79 | 126.72 | Sqmtr |
| 30 | 26.02 | For 2nd coat paint(Epilux-5) over 1st coat paint. | 80 | 126.72 | Sqmtr |
| 31 | 27 | Testing charges of structural steel material according to IS 2062 - 1999 & Testing charges of rubber according to IS : 18555 - 1986 Before fitting fixing of all material to be placed before E.I.C for inspection.All test certificate should be submitted by the firm berore fitting fixing test will be made by Govt approved Lab. | 84 | 7 | Job |
| 32 | 28 | Cost of transportation of materials to the site and shifting the scrap materials to the khatra workshop including loading and unloading at both end etc to complete the job at site as per direction of E.I.C | 81 | 90 | KM |
| 33 | 29 | Cost for lining through S.S. welding of S.S. flat A.I.S.I. 304 of size 100 mm X 6 mm thick on botom seal path ,including cost of supply of raw material , consumables labours ,hire charges of machinaries and other overheads complete as per direction of E.I.C | 82 | 150.72 | Kg |
AI Tender Summary
Tender Timeline
Sep 03, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedSep 17, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 17, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender