| 1 | 1 | Dismantling of wall and ceiling boards(fibre, pulp, insulationetc.) or insulation boards/ slabs/ blankets, any thickness including cover fillets complete all as specified and directed by Engr-in-charge. | 1 | 50 | Sqm |
|---|
| 2 | 2 | Material & labour for 6mm non-asbestos fiber cement building boards fixed or laid /inserted to timber frame work with screws as in ceiling complete all as specified and directed by Engr-in-charge. | 2 | 50 | Sqm |
|---|
| 3 | 3 | Dismantaling timber fillets,rails,posts,rafters,purling etc under 40 Sqm cm in section complete all as specified and directed by Engr-in-charge. | 4 | 110 | RM |
|---|
| 4 | 4 | M&L for 2nd class Hard wood as in plain fillets, square, rectangular, traingular in section clean sawn secured with nails or brads of sectional area exc 13 & not exc 25 Sq cm complete all as specified and directed. | 7 | 110 | RM |
|---|
| 5 | 5 | M & L for 2nd class hard wood as in plain fillets, square, rectangular, traingular in section wrought secured with nailsor brads of sectional area exc 3 & not exc 6 Sq cm complete all as specified and directed by Engr-in-charge. | 8 | 110 | RM |
|---|
| 6 | 6 | M & L for preparation and applying two coat of synthetic enamel paint on wooden surface over one coat of pink primer complete all as specified and directed by Engr-in-charge. | 9 | 130 | Sqm |
|---|
| 7 | 7 | Demolition of cement concrete floor and paving not exc 15cm thick below or above ground floor complete all as specified and directed by Engr-in-charge. | 10 | 10 | Cum |
|---|
| 8 | 8 | M&L for 25mm thick PCC 1:2:4 type B0 using 12.50mm graded stone aggregate as in floor, including rough finished with out using extra cement complete all as specified and directed by Engr-in-charge.. | 11 | 140 | Sqm |
|---|
| 9 | 9 | M&L For Machine cut kota stone slab flooring 20-25mm thick over and incl 20mm thick cement screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete complete all as specified and directed by Engr-in-charge. | 12 | 50 | Sqm |
|---|
| 10 | 10 | Material & labour non skid coloured ceramic tiles 07mm to 08mm thick (Square/Rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11sqm in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match incl 15mm thick cement screed bed in CM 1:6 complete all as specified and directed by Engr-in-charge. | 13 | 60 | Sqm |
|---|
| 11 | 11 | Material & labour for 300 x 200 x 7 mm thick glazed coloured ceramic tiles as in dado, set and jointed in neat cement slurry over cement screed bed 10mm in CM 1:4 and jointed and pointed in coloured cement with pigment to match complete all as specified and directed by Engr-in-charge.. | 14 | 30 | Sqm |
|---|
| 12 | 12 | Material & labour for Chequered cement concrete tiles 20cmx20cmx25mm thick,incl 15mm thick cement screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade set jointed and pointed in neat cement slurry in floor complete all as specified and directed by Engr-in-charge. | 15 | 178 | Sqm |
|---|
| 13 | 13 | M&L for Vitrified ceramic tiles 10 mm thick light shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over 15 mm thick screed bed cement mortar 1:4 complete all as specified and directed by Engr-in-charge. | 16 | 101 | Sqm |
|---|
| 14 | 14 | Dismantaling floor,hearth or wall tilling incl cement mortar beeding, removing serviceablr tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-charge. | 17 | 35 | Sqm |
|---|
| 15 | 15 | Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed bed 10mm in CM 1:4 and jointed complete all as specified and directed by Engr-in-charge.\n | 18 | 3 | Sqm |
|---|
| 16 | 16 | S&F Granite (of any type) tiles machine cut,beeded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone incl grinding and polishing types complete all as specified and directed by Engr-in-charge. | 19 | 2 | Sqm |
|---|
| 17 | 17 | Material & labour for 50mm thick cement concrete type C2, 1:3:6 (using 40mm graded agg) as in plinth protection finishing fair and even complete all as specified and directed by Engr-in-charge. | 20 | 50 | Sqm |
|---|
| 18 | 18 | S&F in repair 19mm dia curtain rods fancy type, mild steel chromium plated with fixing brackets, stops, rollers complete all as specified and directed by Engr-in-charge. | 21 | 38.4 | RM |
|---|
| 19 | 19 | Taking down shutters of any description of any description n exc 1 Sqm complete all as specified and directed by Engr-in-charge. | 22 | 6 | Each |
|---|
| 20 | 20 | Taking down shutters of any description of any descriptionexc 1 sqm and n exc 2 Sqm complete all as specified and directed by Engr-in-charge. | 23 | 4 | Each |
|---|
| 21 | 21 | S&F floor door stopper 150 mm of aluminium alloy body and tongue anodised with hard drawn steel spring complete all as directed by Engineer-in-charge. | 24 | 4 | EACH |
|---|
| 22 | 22 | S&F flush shutters 30 mm thick solid core construction,with block board core and plywood face panels,commercial type on both sides complete all as specified and directed by Engr-in-charge. | 25 | 9 | Sqm |
|---|
| 23 | 23 | S&F 2nd class hardwood glazed and skeleton shutters, 30 mm thick, open rebated and prepared to receive glass/ gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing wire mesh etc sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a), supplied and fitted to chowkats complete all as directed by Engineer-in-Charge. | 26 | 9 | Sqm |
|---|
| 24 | 24 | Supply & fixing MS barrel tower bolt of 100mm long stove enamelled black with bright bolt complete all as specified and directed by Engr-in-charge. | 27 | 8 | Each |
|---|
| 25 | 25 | Supply & fixing 300 mm long mild steel sliding door bolts plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolts plate and two on couple plate and fixed complete all as specified and directed by Engr-in-charge. | 28 | 4 | Each |
|---|
| 26 | 26 | S&F 100mm long MS butt hinges medium weight cold rolled complete all as specified and directed by Engr-in-charge.. | 29 | 12 | Each |
|---|
| 27 | 27 | Supply & fixing MS pressed handle oval type stove enamelled black of 125mm long fixed with screw to shutter complete all as specified and directed by Engr-in-charge. | 30 | 8 | Each |
|---|
| 28 | 28 | Supply & fixing 300 mm ,Mild steel ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed by Engr-in-charge. | 31 | 4 | Each |
|---|
| 29 | 29 | Supply & fixing for galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm & fixed with tinned tacks, or galvanised wire staples. & directed by Engr-in-charge. | 32 | 6 | Sqm |
|---|
| 30 | 30 | S&F steel window with side hung shutters fitted with box type hinges incl guard bars, handles peg stay etc incl cutting the holes in wall for fixing the window all as directed by Engr-in-charge. \n | 33 | 10 | Sqm |
|---|
| 31 | 31 | Taking out the old broken glass (any thickness, size, quality or description from wood/ steel frame glazed with oil putty or fixed with beads and supply and fix plain sheet glass of 3 mm thick in Squares not exceeding 0.50 Sqm in each pane with oil putty and clips complete all as directed by Engineer-in-Charge. | 34 | 15 | Sqm |
|---|
| 32 | 32 | Supply and Fix plain sheet glass/pin headded glass of 3 mm thick in Squares not exceeding 0.50 Sqm in each pane with oil putty and clips complete all as directed by Engineer-in-Charge. | 35 | 8 | Sqm |
|---|
| 33 | 33 | Material & labour for preparation of old surfaces and & applying one coat of distempering complete all as specified and directed by Engr-in-charge. | 36 | 150 | Sqm |
|---|
| 34 | 34 | M&L for preparation of old plastered surface of walls and applying one coats of cement base paint complete all as specified and directed by Engr-in-charge. | 37 | 150 | Sqm |
|---|
| 35 | 35 | Material & labour for preparation of old wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-charge. | 38 | 5 | Sqm |
|---|
| 36 | 36 | Preparation of old steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat synthetic enamel paint complete all as specified and directed by Engr-in-charge. | 39 | 30 | Sqm |
|---|
| 37 | 37 | Dismantling plain or corrugated steel sheeting any gauge any thickness complete all as specified and directed by Engr-in-charge. | 40 | 150 | Sqm |
|---|
| 38 | 38 | S/F mild steel galvanised iron corrugated sheeting of thickness 0.63 mm with two corrugations side lap, fixed with L-type or J-hooks and washers in roof,walls etcwith grade of zink coating 275 | 41 | 130 | Sqm |
|---|
| 39 | 39 | All as per item No. 39 here in before but except sheeting only. | 42 | 10 | Sqm |
|---|
| 40 | 40 | S&F 0.80 mm thick plain , galvanised , mild steel sheeting , in ridges, hips, valley gutters, drip and straight flashing ( length and girth as fixed ) of class -8, complete all as specified and directed by Engr-in-charge. | 43 | 10 | Sqm |
|---|
| 41 | 41 | M & L for preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coat synthetic enamel paint over one coat of red oxide primer complete all as specified and directed by Engr-in-charge. | 44 | 148 | Sqm |
|---|
| 42 | 42 | S&F in repair bib tab 15 mm cast copper alloy chromium plated fancy typewith crutch or butterfly handle,screw dwon ,screw for iorn pipe or brass ferrule and fixed in repaires complete all as directed by engr -in -charge. | 45 | 4 | Each |
|---|
| 43 | 43 | S&F in repairs tublar towel rail 20m dia of Aluminium anodised 'D' type 60cm long between angles incl takig down the old Complete all as directed by Engineer-in-Charge. | 46 | 2 | Each |
|---|
| 44 | 44 | S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wasts, incl bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460mm bowl size 410mm x 330 mm x 160mm incl takig down the old Complete all as directed by Engineer-in-Charge. | 47 | 1 | Each |
|---|
| 45 | 45 | Taking dowm 15mm GI pipe Complete all as directed by Engineer-in-Charge. | 48 | 20 | RM |
|---|
| 46 | 46 | S&F in 15mm dia gaivanised tubes medium grade with all fittings and fixed complete to walls Complete all as directed by Engineer-in-Charge. | 49 | 20 | RM |
|---|
| 47 | 47 | Demolition and breaking up drain pipes set in cement motar Complete all as directed by Engineer-in-Charge. | 50 | 10 | RM |
|---|
| 48 | 48 | S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors Complete all as directed by Engineer-in-Charge. | 51 | 10 | RM |
|---|
| 49 | 49 | S&F 75mm dia Cast iron Nahani trap with grating incl jointing to waste pipe fixed in CC type B1 (1:2:4) Complete all as directed by Engineer-in-Charge. | 52 | 1 | Each |
|---|
| 50 | 50 | M&L for roughening surfacing of old concrete floor by picking,sweeping clean and washing down with water to remove dust incl brushing neat cement slurry with 3.0 kg of cement per sqm complete all as specified and directed by Engineer- in Charge | 53 | 101 | Sqm |
|---|
| 51 | 51 | M&L for 25mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in floor complete all as specified and directed by Engineer- in Charge | 54 | 101 | Sqm |
|---|
| 52 | 52 | Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed. | 55 | 177 | Sqm |
|---|
| 53 | 53 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. N exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil all as specified and directed. | 56 | 50 | Cum |
|---|
| 54 | 54 | M & L for Cement concrete Type D2 1:4:8 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed by Engr-in-charge. | 57 | 6.5 | Cum |
|---|
| 55 | 55 | M & L for PCC 1:4:8 type D-2, 100mm thick, using 40mm graded stone aggregate as in surface of flooring complete all as specified and directed by Engr-in-charge. | 58 | 148 | Sqm |
|---|
| 56 | 56 | M & L for block masonry with solid pre-cast cement concrete blocks made out of cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate, exc 10cm in width and setting in cement mortar 1:6 complete all as specified and directed. | 59 | 20 | Cum |
|---|
| 57 | 57 | M & L for Providing cement concrete Type C1, 1:3:6 using 20mm graded stone aggregate as in coping complete all as specified and directed by Engr-in-charge. | 60 | 2.6 | Cum |
|---|
| 58 | 58 | M&L PCC (1:3:6) type C-1 using 20mm graded stone agg as in coping finished even and fair without using extra cement complete all as specified and directed by Engr-in-charge. . | 61 | 37 | Cum |
|---|
| 59 | 59 | M&L precast PCC 1:3:6 type C1 using 20mm agg as bonder stones set in CM 1:6 complete all as specified and directed by engineer-in -charge. | 62 | 2.7 | Cum |
|---|
| 60 | 60 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed by Engr-in-charge. | 63 | 14 | Cum |
|---|
| 61 | 61 | Removing of excavated materials (Soils) to a distance n exc 50m and depositing where directed at level n exc 1.50m above the starting point complete all as specified and directed by Engr-in-charge. | 64 | 66 | Cum |
|---|
| 62 | 62 | M & L for 15mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces and finishing the surface even and fair complete all as specified and directed by Engr-in-charge. | 65 | 58.5 | Sqm |
|---|
| 63 | 63 | M & L for 15mm thick rendering in cement mortar 1:4 on stone masonry surfaces without using extra cement and finishing the surface even and fair complete all as specified and directed by Engr-in-charge. | 66 | 35 | Sqm |
|---|
| 64 | 64 | Supply only integral water proofing compound of approved brand/make. | 67 | 5 | Kg |
|---|
| 65 | 65 | M & L for preparation of newly plastered or un-plastered surfaces of walls and applying three coats of white wash complete all as specified and directed by Engr-in-charge. | 68 | 58.5 | Sqm |
|---|
| 66 | 66 | M & L for providing cement concrete cas in situ 1:2:4, type B1 (using 20mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edge including use of formwork complete all as specified and directed by Engr-in-charge.. | 69 | 1 | Cum |
|---|
| 67 | 67 | M&L for 50mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in hardstanding complete all as specified and directed by engineer-in -charge. | 70 | 35 | Sqm |
|---|
| 68 | 68 | Taking down carefully copper/aluminium point wiring from existing points (light, fan, socket or power) alongwith compete fittings such as switches ,ceiling rose, pendent holder, sketch fitting & regulator etc. including making good to the disturbed surfaces of wall, roof and floor etc. to match with the existing surfaces complete all as specified and directed by Engineer-in-Charge. | 71 | 49 | Each Point |
|---|
| 69 | 69 | Taking down unserviceable submain wiring and service cable alongwith batten /PVC conduits etc. and making good disturbed surfaces of walls/floors and match the existing surface all as directed at site. | 72 | 80 | RM |
|---|
| 70 | 70 | Taking down unserviceable main switches, DBs with MCB SP/Isolators by unscrewing form board complete all as specified and directed by Engineer-in-Charge | 73 | 2 | Each |
|---|
| 71 | 71 | M&L for point wiring using approved colour coding as per IS with using approved coper coding as per IS 1.5 Sqmm multistranded,1100 volt grade copper conductor cable of PVC FRLSH insulated and unsheathed type alongwith 1.5 Sqmm PVC insulated stranded copper conductor cable for continuous earthing in & incl PVC casing & caping with accessories having ISI mark fixed on wall surfaces / ceiling including provision PCV Box on top for fixing switches sockets etc. all as specified for one light point/ fan /Bell point controlled by one switch complete all as specified and directed by Engineer-in-Charge. | 74 | 34 | Each Point |
|---|
| 72 | 72 | All as per Srl item No 71 here-in-before but controlled with one 3 pin socket outlet 15 Amp, independent board with cable 2.5sqmm including provision of 2.5 sqmm single core multistanded PVC FRLSH insulated copper conductor cable as earth conducting conductor complete all as per specified and directed by Engineer-in-Charge. | 75 | 7 | Each Point |
|---|
| 73 | 73 | All as per Srl item No 71 here-in-before but controlled with one 3 pin socket outlet 5 Amp on the independent board with other switches with PVC FRLSH insulated copper conductor cable 1.5 Sqmm complete all as per specified and directed by Engineer-in-Charge. | 76 | 5 | Each Point |
|---|
| 74 | 74 | All as per Srl item No 71 here-in-before but controlled with one 3 pin socket outlet 5 Amp on the same board with other switches with PVC FRLSH insulated copper conductor cable 1.5 Sqmm complete all as per specified and directed by Engineer-in-Charge. | 77 | 3 | Each Point |
|---|
| 75 | 75 | Supply and fixing of switch piano type 15 Amp, 230 Volt, flush button single pole one way complete all as specified and directed by Engineer -in-Charge, | 78 | 7 | Each |
|---|
| 76 | 76 | Supply and fixing of socket outlet 5 pin 5/15 Amp 2-in-one 230 Volt flush type complete all as specified and directed by Engineer -in-Charge. | 79 | 7 | Each |
|---|
| 77 | 77 | Supply and fixing of socket outlet 3 pin 5 Amp 2-in-one 230 Volt flush type complete all as specified and directed by Engineer -in-Charge. | 80 | 8 | Each |
|---|
| 78 | 78 | Supply and fixing of switch piano type 5 Amp, 230 Volt, flush button single pole one way complete all as specified and directed by Engineer -in-Charge, | 81 | 42 | Each |
|---|
| 79 | 79 | M&L Ceiling rose, 3 terminal with ISI mark all as specified and directed by Engr-In-Charge. | 82 | 15 | Each |
|---|
| 80 | 80 | Supply and fixing surface & wall mounted LED 20W tube light fitting batten 4 feet with extruded aluminium housing and robust construction 20W system lumen with all accessories all as specified and directed by Engg-in-Charge. Make: Bajaj Cat No. BLRB-DB 118 or equivalent of Wipro and CG/Philips | 83 | 19 | Each |
|---|
| 81 | 81 | Material and labour for lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings. Make : Anchor/leader/havells | 84 | 10 | Each |
|---|
| 82 | 82 | Supply and fixing LED lamp 12 W system lumen (NOM) 600 with all accessories all as specified and directed by Engg-in-Charge. Make:Cromptom part No-LED 12DFCDL-PRO-BO or equivalent of Bajaj/Philips/wibro | 85 | 11 | Each |
|---|
| 83 | 83 | Supply & Fixing bulk head light with 10 W LED Lamp complete with opeal diffuser . Make Bajaj Cat No BIBWP 10W LED or equivalent of Wipro and CG/Philips | 86 | 2 | Each |
|---|
| 84 | 84 | Dismantling and Supply,fixing, Testing water heater storage type with multifunctional safety valve, electric operated 230 V, Single Phase complete including one no of heating element, automatic, thermal cut out, fusible plug, anti vacum sys, built in presser release valve,thermostat, rust proof powder coated body, indicator lamps and all safety advices as per E-in-C's Branch technical instructions and of capacity 50 liters including provn of grouting bolts in walls ,pvc connection ect and making good disturbed surfaces. Make : CG/Racold/Havells/Bajaj/indo and all as specified and directed by Engineer-in-charge . | 87 | 1 | Each |
|---|
| 85 | 85 | Dismantle old u/s exhaust fan and S&F for exhaust AC, Single Phase 380mm sweep, with louvre complete all as per specified and directed by Engineer-in-Charge. | 88 | 3 | Each |
|---|
| 86 | 86 | Supply and fixing of sheet metal enclosure double door for DBs single pole and neutral for 8 way 240 volt complete all as specified and directed by Engineer-in-Charge | 89 | 2 | Each |
|---|
| 87 | 87 | S&FMCB 2 pole 40 Amp,10 KA,C series complete all as specified and directed by Engr-in-charge. | 90 | 2 | Each |
|---|
| 88 | 88 | S&F MCB SP 6 Amp to 32 Amp, 10 KA ,C series complete all as specified and directed by Engr-in-charge.. | 91 | 12 | Each |
|---|
| 89 | 89 | Supply and fixing 1100 Volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire one twin core cable flat or circular of size 16 Sqmm complete all as specified and directed by Engr-in-charge. | 92 | 80 | RM |
|---|
| 90 | 90 | M&L for Earthing complete with galvanised steel earth plate electrode 60x60cmx6mm thick, buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts check nuts and washers of galvanised iron protection pipe light grade of 20mm dia and watering pipe medium grade of 15mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as specified directed and shown in electrical plate No 3 of SSR part -I of 2009 connecting to earthing test point all as specified and indicated including all earth work excavation in any type of strata, returning filling and disposal of surplus soil and testing on completion complete all as specified and as directed. Including testing complete Complete all as specified and directed by Engr-in-charge. | 93 | 1 | Each |
|---|
| 91 | 91 | Net Contract Sum will be after deducting Sch Of Credit Rs 17187.50 | 132 | | |
|---|
