| 1 | 1 | LIST OF ITEMS OF WORKS | 1 | | |
|---|
| 2 | 1.01 | Dismantlig steel poles/struts, of any size complete all as specified and as directed. | 1.01 | 7 | EACH |
|---|
| 3 | 1.02 | Dismantling/taking down old unserviceable GI wire HT/LT pole complete all as specified and as directed. | 1.02 | 1 | QTL |
|---|
| 4 | 1.03 | Dismantling stay assembly complete all as specified and as directed. | 1.03 | 6 | EACH |
|---|
| 5 | 1.04 | Dismantling gang operated Air break switch vertical/horizontal mounted triple pole mechanically operated complete all as specified and as directed. | 1.04 | 8 | EACH |
|---|
| 6 | 1.05 | Dismantling insulator any type and size complete all as specified and as directed. | 1.05 | 135 | EACH |
|---|
| 7 | 1.06 | Dismanting cross arms of mild steel channel or angle sections etc complete all as specified and as directed. | 1.06 | 5 | QTL |
|---|
| 8 | 1.07 | Demolition of pain cement concrete as in coping/foundation complete all as specified and as directed. | 1.07 | 4 | CUM |
|---|
| 9 | 1.08 | Cutting existing road/hard standing made of concrete or premix carpet, WBM, soling and moorum filling including excavation for laying cable/pipe, width 0.50meter and depth 0.70meter and making good road/hard standing using pre mix bituminous as required at site to match with the existing surface complete all as specified and as directed. \nNOTE: Hand drilling/ breaker machine diamond cutter shall be used for executing this work. | 1.08 | 30 | RM |
|---|
| 10 | 1.09 | Cutting/trimming off the tree branches n. exc 30cm girth protruding/touching both sides of the conductor 3meter away on both sides of the over head condector lines/street light span clearing all unserviceable material complete all as specified and as directed. | 1.09 | 1500 | SPAN |
|---|
| 11 | 1.1 | Cleaning ground around four pole structure upto 3.0meter distance from four pole structure, clearing all unserviceable material and maintenance of GOD/Jumpher etc with jelly complete all as specified and as directed. | 1.1 | 50 | EACH JOB |
|---|
| 12 | 1.11 | Cleaning ground around two pole structure upto 3.0meter distance from four pole structure, clearing all unserviceable material and maintenance of GOD/Jumpher etc with jelly complete all as specified and as directed. | 1.11 | 50 | EACH JOB |
|---|
| 13 | 1.12 | Taking down unserviceable HT under ground cable of size of 95 to 300 sqmm, 3 core including removing electrical connection and keeping side serviceable cable including removing of cable protection cover etc complete all as specified and as directed. \nNote: Unserviceable cable retrieved from taking down will become contractor's property and recovery shall be made under schedule of credit | 1.12 | 500 | RM |
|---|
| 14 | 1.13 | Dismantling/taking down old unserviceable ACSR conductor from HT/LT pole complete all as specified and as directed. | 1.13 | 2 | QTL |
|---|
| 15 | 1.14 | M&L for finding out the faults in HT (11KV) UG cable of size 95 Sqmm to 300 Sqmm using HT cable fault locator. \nNote: Cable fault locator should be arranged with in 07 days from the date of intimation by Engineer-in-Charge otherwise penalty of Rs. 2000.00 per day shall be levied for each day of delay for every segment of cable. | 1.14 | 10 | EACH |
|---|
| 16 | 1.15 | Supply and spread granite trap or basalt course aggregate of size 50mm to 20 mm grade for the out door substation complete all as specified and as directed. | 1.15 | 10 | CUM |
|---|
| 17 | 1.16 | Exacavation in trenches n. exc. 1.50meter in width and depth n. exc. 1.50meter and getting out in hard/dense soil complete all as specified and as directed. \nNote: Excavation shall be carried out only by manually. | 1.16 | 190 | CUM |
|---|
| 18 | 1.17 | All as per Sl item No. 1.16 above but depth exceeding 1.50meter but n. exc. 3.0meter complete all as specified and as directed. Note: Excavation shall be carried out only by manually. | 1.17 | 2 | CUM |
|---|
| 19 | 1.18 | Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soil obtained from excavation complete all as specified and as directed. | 1.18 | 150 | CUM |
|---|
| 20 | 1.19 | Removal of surplus excavated soil to a distance n. exc. 50 meters and depositing at a level not exceeding 1.50meter from starting point complete all as specified and as directed. | 1.19 | 42 | CUM |
|---|
| 21 | 1.2 | Material and labor for PCC 1:3:6 typ C-2 (using 40mm graded stone aggregate) as in foundation/mass concrete complete all as specified and as directed. | 1.2 | 4 | CUM |
|---|
| 22 | 1.21 | Material and labor for PCC 1:3:6 typ C-1 (using 20mm graded stone aggregate) as in foundation/mass concrete complete all as specified and as directed. | 1.21 | 2 | CUM |
|---|
| 23 | 1.22 | Supply and spreading river sand or riddles earth for cushioning and covering to under ground electric cable in trenches complete all as specified and as directed. NOTE :- Punned thickness shall be measured and paid. | 1.22 | 37 | CUM |
|---|
| 24 | 1.23 | Supply and laying unreinforced precast concrete cable cover class HT type-1 of size 300mmX180mmX40 mm complete all as specified and as directed. | 1.23 | 1800 | EACH |
|---|
| 25 | 1.24 | Relaying cable cover obtained from taking down in trenches complete all as specified and as directed. | 1.24 | 420 | EACH |
|---|
| 26 | 1.25 | Supplying, laying, testing and commissioning HT cable in trenches/fixing to walls/pipe/pole with proper saddles XLPE insulated heavy duly galvanised steel strip armoured HT 11000 volt grade earthed with aluminium conductors of size 95 sqmm, 3 core earthed complete all as specified and directed. Make : Havells/Polycab. | 1.25 | 450 | RM |
|---|
| 27 | 1.26 | All as per Sl item No. 1.25 above but electric cable of size of 300 sqmm, 3 core complete all as specified and as directed. Make : Havells/Polycab. | 1.26 | 50 | RM |
|---|
| 28 | 1.27 | Laying/relaying of electric cable obtained from taking out/down in trench/fixing to walls/pipe/pole with proper saddles, XLPE11000 Volt insulated heavy duly galvanised steel strip armouredHT cable size of 95 to 300 sqmm, 3 core complete all as specified and as directed. | 1.27 | 500 | RM |
|---|
| 29 | 1.28 | Supply and fix in replacement GI tubing, light grade 80mm nominal dia in trenches/road/pole for cable protection complete all as specified and as directed. Make : Jindal / Tata / Surya / Zenith | 1.28 | 60 | RM |
|---|
| 30 | 1.29 | Restringing of ACSR conductor/earth wire of any type in HT/LT overhead lines and to proper upkeep of and maintaining safe distance between conductors/spans complete all as specified and as directed. | 1.29 | 5000 | RM |
|---|
| 31 | 1.3 | Supply and stringing ACSR conductor of any type for HT/LT poles complete all as specified and as directed. | 1.3 | 2 | QTL |
|---|
| 32 | 1.31 | Supply and fix in replacement GOD handle required at site complete all as specified and as directed. | 1.31 | 5 | EACH |
|---|
| 33 | 1.32 | Supply and stringing GI wire 4 mm dia for earth continuity/making cradles complete all as specified and as directed. . | 1.32 | 1 | QTL |
|---|
| 34 | 1.33 | Supply and fix in replacement of Lightning arrestor expulsion type complete with all fittings and transmission class discharge capacity 65 Kilo Amps suitable for 11000V grade. (Each set of three) Make Jaipuria or equivalent | 1.33 | 10 | EACH SET |
|---|
| 35 | 1.34 | Supply and fix Gang operated Air break switch triple pole mechanically operated on insulators and steel frame with operating mechanism worked from ground level for current rating up to 200 Amps,11000 volts complete all as specified and as directed. Make Jaipuria or equivalent | 1.34 | 4 | EACH |
|---|
| 36 | 1.35 | Supply and fix Gang operated Air break switch triple pole mechanically opearted on insulators and steel frame with operating mechanism. worked from ground level for current rating upto 400 Amps,11000 volts complete all as specified and as directed. Make Jaipuria or equivalent | 1.35 | 4 | EACH |
|---|
| 37 | 1.36 | Supply and fix single Disc insulator assembly porcelain vitreous 145mm high and 255 mm dia ball and socket type including tension clamps for 11000 volt complete all as specified and as directed. Make Jaipuria or equivalent | 1.36 | 15 | EACH |
|---|
| 38 | 1.37 | Supply and fix in replacement of Pin insulator porcelain vitreous white ,brown or green insulator including one galvanised mild steel straps,washers,insulator bolts, washers and nuts and one galvanised steel nut 150 mm dia 150 mm height suitable for 11000volts grade all as specified and directed by engr-in-charge. Make Jaipuria or equivalent | 1.37 | 30 | EACH |
|---|
| 39 | 1.38 | Supply and fix in replacement Pin insulator porcelain vitreous white, brown or green insulator including one galvanised mild steel spindle, two galvanised steel washers and one galvanised steel nut 65 mm dia 100 mm height as site requirement suitable for 1100 volts grade complete all as specified and as directed. Make Jaipuria or equivalent | 1.38 | 60 | EACH |
|---|
| 40 | 1.39 | Supply and fix in replacement shackle insulator porcelain vitreous white, brown or green insulator including one galvanised mild steel straps, washers, insulator bolts, washers and nuts and one galvanised steel nut 75 mm dia 90 mm height suitable for 1100 volts grade complete all as specified and as directed. Make Jaipuria or equivalent | 1.39 | 30 | EACH |
|---|
| 41 | 1.4 | Supply, fabricate, erect and fix in position mild steel structural steel work as in cross arms with and including preparing surfaces and applying two coats of synthetci enamel paint over one coat of red oxide primer complete all as specified and as directed. | 1.4 | 5 | QTL |
|---|
| 42 | 1.41 | Supply and fix in replacement of 11KV HT drop out fuse units complete with all accessories including insulator and steel frame etc.(Each set of three) complete all as specified and as directed. Make Jaipuria or equivalent | 1.41 | 5 | EACH SET |
|---|
| 43 | 1.42 | Supply and fix in replacement of cable route indicator for marking of HT/ UG cable cable of any size with cast iron round plate of 150 mm dia suitably fitted on iron and with and including embeded with PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) complete all as specified and as directed. | 1.42 | 50 | EACH |
|---|
| 44 | 1.43 | Supply and fix in replacement Stay assembly (dia of stay assembly 20mm) complete with all accessories as shown in Electrical Plate No 1 complete all as specified and as directed. | 1.43 | 3 | EACH |
|---|
| 45 | 1.44 | Supply and fix in replacement of Stay assembly (dia of stay assembly 20 mm) complete with all accessories as shown in Electrical Plate No 1 complete all as specified and as directed. | 1.44 | 3 | EACH |
|---|
| 46 | 1.45 | Supply and fix in replacement insulating mat of size 2.0m X1.0mX19 mm thick complete all as specified and as directed. | 1.45 | 2 | EACH |
|---|
| 47 | 1.46 | Supply and fix in replacement compressing/crimping type sleeve joints for jointing conductor/jumpher connections including treatment with conducting jelly up to 10mm dia complete all as specified and as directed. | 1.46 | 52 | EACH JOB |
|---|
| 48 | 1.47 | Supply and fix in replacement compressing/crimping type sleeve joints for jointing conductor/jumpher connections including treatment with conducting jelly above 10mm dia complete all as specified and as directed. | 1.47 | 50 | EACH JOB |
|---|
| 49 | 1.48 | Preparing existing wall surfaces and applying one coat of white wash on boundry wall of substation complete all as specified and as directed. | 1.48 | 100 | SQM |
|---|
| 50 | 1.49 | Scrapping out faded/rusted old paint from poles using wire brush,emery paper,and preparing surface for painting, applying one coat of aluminium paint on poles including, cross arm, clamps, bolts and nuts, anti-climbing device etc and writing existing pole number with black paint over a yellow base after painting for LT poles of normal/swan neck poles complete all as specified and as directed. | 1.49 | 900 | EACH JOB |
|---|
| 51 | 1.5 | Scrapping out faded/rusted old paint from poles using wire brush,emery paper,and preparing surface for painting, applying one coat of aluminium paint over one coat of red oxide primer on the poles including, cross arm, clamps, bolts and nuts, anti-climbing device etc and writing the existing poles number with black paint over a yellow base after painting all as specified for HT poles complete all as specified and as directed. | 1.5 | 40 | EACH JOB |
|---|
| 52 | 1.51 | All as per Sl item No.1.50 above but for Decorative pole twin Arm type complete all as specified and as directed. | 1.51 | 450 | EACH JOB |
|---|
| 53 | 1.52 | Preparing by scrapping out old faded/rusted surfaces of Decorative Bollard light fitting/Mounting stand paint and applying two coats synthenitic enamel paint complete all as specified and as directed. | 1.52 | 350 | EACH JOB |
|---|
| 54 | 1.53 | Preapring concrete surfacesof coping and applying one coat of white cement based paint complete all as specified and as directed. | 1.53 | 200 | EACH JOB |
|---|
| 55 | 1.54 | Scrapping out faded/rusted old paint from the four HT pole structure using wire brush, emery paper and preparing surfaces and applying one coat of aluminium paint on poles including cross arm, clamps, bolts and nuts, anti-climbing device etc and writing existing poles number with black paint over a yellow base after painting complete all as specified and as directed. | 1.54 | 10 | EACH JOB |
|---|
| 56 | 1.55 | Scrapping out faded/rusted old paint from the two HT pole structure using wire brush, emery paper and preparing surfaces and applying one coat of aluminium paint on poles including cross arm, clamps, bolts and nuts, anti-climbing device etc and writing existing poles number with black paint over a yellow base after painting complete all as specified and as directed. | 1.55 | 25 | EACH JOB |
|---|
| 57 | 1.56 | Supply and erect in replacement steel tubular swaged pole type 410SP55 (11meter long) complete with CI base plate and final and single swan neck including applying three coats of bituminious paint for the embeded potion and two coats of aluminium over a coat of red oxide primer complete all as specified and as directed. | 1.56 | 2 | EACH JOB |
|---|
| 58 | 1.57 | Supply and erect steel tubular swaged pole type 410SP55 (11meter long) complete with CI base plate and final and single swan neck including applying three coats of bituminious paint for the embeded potion and two coats of aluminium over a coat of red oxide primer complete all as specified and as directed. | 1.57 | 4 | EACH JOB |
|---|
| 59 | 1.58 | Supply and erect in replacement steel tubular swaged pole type 410SP31 (9meter long) complete with CI base plate and final and single swan neck including applying three coats of bituminious paint for the embeded potion and two coats of aluminium over a coat of red oxide primer complete all as specified and as directed. | 1.58 | 1 | EACH JOB |
|---|
| 60 | 1.59 | Supply and fix in replacement bracket made out of GI pipe medium grade, 50 mm dia, 90 cm long for fixing street light with and including clamps, nuts, bolts, washer commplete accessories and applying two coats of oil painting over one coat of red oxide zinc chrome primer complete all as specified and as directed. | 1.59 | 20 | EACH JOB |
|---|
| 61 | 1.6 | Supply and fix in replacement 05 KVAR (heavy duty) aluminium can type (gas filled) capacitor 440 Volts complete all as specified and as directed. Make: Schneider/Epcos/L&T | 1.6 | 2 | EACH |
|---|
| 62 | 1.61 | Supply and fix in replacement 10 KVAR (heavy duty) aluminium can type (gas filled) capacitor 440 Volts complete all as specified and as directed. Make: Schneider/Epcos/L&T | 1.61 | 4 | EACH |
|---|
| 63 | 1.62 | Supply and fix in replacement 15 KVAR (heavy duty) aluminium can type (gas filled) capacitor 440 Volts complete all as specified and as directed. Make: Schneider/Epcos/L&T | 1.62 | 6 | EACH |
|---|
| 64 | 1.63 | Supply and fix in replacement 20 KVAR (heavy duty) aluminium can type (gas filled) capacitor 440 Volts complete all as specified and as directed. Make: Schneider/Epcos/L&T | 1.63 | 6 | EACH |
|---|
| 65 | 1.64 | Supply and fix in replacement of 12.5 KVAR capacitor duty contactor (01 No +01 NC) 440 Volts complete all as specified and as directed. \nMake :Schneider/ABB/L&T/Indoasian | 1.64 | 7 | EACH |
|---|
| 66 | 1.65 | Supply and fix in replacement of 16.7 KVAR capacitor duty contactor (01 No +01 NC) 440 Volts complete all as specified and as directed. \nMake :Schneider/ABB/L&T/Indoasian | 1.65 | 4 | EACH |
|---|
| 67 | 1.66 | Supply and fix in replacement of 20 KVAR capacitor duty contactor (01 No +01 NC) 440 Volts complete all as specified and as directed. \nMake :Schneider/ABB/L&T/Indoasian | 1.66 | 4 | Each |
|---|
| 68 | 1.67 | Supply and fix in replacement of 25 KVAR capacitor duty contactor (01 No +01 NC) 440 Volts complete all as specified and as directed. \nMake :Schneider/ABB/L&T/Indoasian | 1.67 | 4 | Each |
|---|
| 69 | 1.68 | Supply and fix in replacement automatic transfer switch capacity of 200A/415 volt /four pole12 Volt DC with open execution complete all as specified and as directed. . Make - Havells or equivalent | 1.68 | 1 | Each |
|---|
| 70 | 1.69 | M&L for Bus bar chamber outdoor type of size 45cm X 45cm X 30cm, made out of 3mm thick mild steel sheet with 400 Amp rated copper busbar with necessary insulators mounted on and including 25X25X6mm thick angle iron legs fixed in and including PCC foundation 1:4:8 type D2 (using 40mm graded stone aggregate). | 1.69 | 6 | Each |
|---|
| 71 | 1.7 | Supply only Cable end termination joint, heat shrinkable type, suitable for 3 core 95 Sqmm, HT 11 KV (Earthed) XLPE, insulated cable, outdoor type with all connected accessories and jointing materials complete all as specified and as directed. Make : 3M/Rechem/Denson | 1.7 | 6 | Each |
|---|
| 72 | 1.71 | Supply only Cable end termination joint, heat shrinkable type, suitable for 3 core 95 Sqmm, HT 11 KV (Earthed) XLPE, insulated cable, indoor type with all connected accessories and jointing materials complete all as specified and as directed. Make : 3M/Rechem/Denson | 1.71 | 4 | Each |
|---|
| 73 | 1.72 | Supply only Cable end termination joint, heat shrinkable type, suitable for 3 core 300 Sqmm, HT 11 KV (Earthed) XLPE, insulated cable, outdoor type with all connected accessories and jointing materials complete all as specified and as directed. Make : 3M/Rechem/Denson | 1.72 | 5 | Each |
|---|
| 74 | 1.73 | Supply only Cable end termination joint, heat shrinkable type, suitable for 3 core 300 Sqmm, HT 11 KV (Earthed) XLPE, insulated cable, indoor type with all connected accessories and jointing materials complete all as specified and as directed. Make : 3M/Rechem/Denson | 1.73 | 3 | Each |
|---|
| 75 | 1.74 | M&L for jointing only HT 11KV end termination joint of any size outdoor/Indoor type \nNote : Joint kit shall be issued under Sch 'B' | 1.74 | 18 | Each |
|---|
| 76 | 1.75 | Supply only cable straight through cable jointing kit for 11 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 Sqmm complete all as specified Make : 3M/Rechem/Mseal \n | 1.75 | 10 | Each |
|---|
| 77 | 1.76 | Supply only cable straight through cable jointing kit for 11 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 300 Sqmm complete all as specified Make : 3M/Rechem/Mseal | 1.76 | 6 | Each |
|---|
| 78 | 1.77 | M&L for Jointing only HT 11KV straight through joint of any size outdoor type \nNote:Joint kit shall be issued under Sch 'B' | 1.77 | 16 | Each |
|---|
| 79 | 1.78 | Supply and topping up of transformer oil confirming to IS 335 in transformers and oil circuit breaker all as specified and directed.Note :- Test certificate from the manufacturerer should be produced. | 1.78 | 440 | LITRE |
|---|
| 80 | 1.79 | Material and labour for earthing complete with galvanized steel earth plate electrode 60cmX60cmX6mm thick, buried directly in ground (earth pit not less than 2.25meter below normal ground level) with top edge of the plate not less than 1.50meter below normal GL, connected to and including galvanized earth lead strip of size 25mmX4mm upto 7.50meter distance and connected by means of bolts, nuts, checknuts and washers of galvanized iron and including 15 mm dia medium grade GI pipe including excavation, earth work in any type of strata, charcoal, salt and PCC chamber, RCC 1:2:4 type B-1 20 mm thick cover with deformed/twisted steel bars 8mm dia @15cm c/c in both ways complete, testing and connecting up complete all as specified and as directed. | 1.79 | 10 | EACH JOB |
|---|
| 81 | 1.8 | Supply, installation, testing and commissioning in replacement of out door type control panel made out of thermoplastic reinforced poly carbonite cubical panel board suitable for 3 phase 4 wire 415 volts AC and should be Transparent polycarbonite covers, shock proof, IP 65 grade, weather proof and Anticorrosive having internally embedded gasket on the covers, cable entry knockouts or using cable entry flanges with self threaded screw slots inside the box and having spring tensioned half turned screws and ceiling facility and mounted on PCC plateform of suitable size with PCC 1:3:6 type C-1 projected 30 cm above ground level and 30 cm above ground level with the following accessories :-\n(a) Encls: Thermoplastic Polycarbonate Mounted with suitable iron angle frame and roof is 40cm long around the panel. The panel have sufficient space for proper connection. Out going connections of the panel should be in horizontal and direct connection from MCCB/MCB. Make:- Havells/Hensel /Schniederor equivalent. \n(b) Busbar rating:- Copper bus bar chamber with coloured sleeves(Red,yellow,blue&black) for indication of different phases (04 Nos)400 Amps-01 Set \n(c) Incoming:-250 A TPN MCCB 50 KA-01 No\n(d) Outgoing 125A MCCB TPN 25 KA 01 Nos\n(e) 63 A TPN C Curve MCB-10 Nos (g) MCB SPN 32 Amp -4 Nos\n(f) Digital multifunctional meter to measure current, voltage, frequency, Power Factor,Power etc-01 No\n(g) Indicator LED lamp assy-RYB-01, Set of 03 Nos (h) Digital timer (Pulse) 110-240VAC-01Nos (i) Auto manual switch -01Nos (j) Contactor 4 pole 63 Amp 01 Nos. | 1.8 | 3 | EACH JOB |
|---|
