Supply Of Tools & Tackle, KICHHA-Uttarakhand

Supply Of Tools & Tackle-1 High Speed Steel Tool Bit Miranda Triples Swastik S-400 2 1 / 4 X 6 3 3 / 8” X 6” 4 1 / 2” X 6” 5 3 / 4 “ X 4” 6 3 / 4 “ X 6” 7 1” X 6” 8 Addission Make Taper Shunk Drill 1 / 16 9 15 / 64 10 1 / 4 11 5 / 32 12 Addission Make Taper Shunk Drill 3 / 16 13 7 / 32 14 13 / 32” 15 5 / 16 16 7 / 16 17 17 / 32 18 21 / 32 19 11 / 16 20 Addission Make Taper Shunk Drill 1 21 1.1 / 8 22 1.1 / 2 23 19.5 Mm 24 21 Mm 25 48 Mm 26 Straight Shrunk Drill Addison Make 3 Mm 27 5 Mm 28 6 Mm 29 8 Mm 30 1 / 16 31 1 / 8 32 3 / 16 33 Bolt Tap Bsp Totem Make Set Of 2 Pcs 1 / 4 34 3 / 8 35 Bolt Tap “Bsw” Totem Make Set Of 3 Pcs. 3 / 8 36 1 / 2 37 5 / 8” 38 3 / 4 39 5 / 16” 40 7 / 8 41 1 42 1.1 / 4 43 Bolt Tap Metric Size Totem Make 4 Mm 44 6 Mm 45 8Mm 46 10Mm 47 Square H. S. Steel ( 20% Carbon ) 1 / 2 48 3 / 4 49 1” 50 Grinding Wheel Carborandum Make 51 6” Dia X 3 / 8” Thick X ½ ” Bore Rough 52 -Do- Fine 53 10” Dia X 1” Thick X 1” Bore Rough 54 -Do- Fine 55 10” Dia X 2” Thick X 1” Bore Rough 56 -Do- Fine 57 10” Dia X 1 ½ ” Thick X 1” Bore Rough 58 -Do- Fine 59 Files ‘J&K’ Make Half Round ( Rough ) 10” 60 12 61 Files ‘J&K’ Make Half Round ( Smooth ) 10” 62 -Do- 12” 63 -Do- 14” 64 Files ‘J&K’ Make Half Round Wood Rasp 6 65 10 66 Files ‘J&K’ Make Flat ( Polish ) 8” 67 10 68 12 69 14 70 Drill Socket 71 Pipe Wrench Jhallani Make 8 72 10 73 12 74 14” 75 18” 76 24” 77 Die Nut Totem 1 / 2 78 3 / 4 79 5 / 8 80 24 Mm 81 Combination Level 82 Dial Vernier Caliper 300 Mm Mitutoyo Make, Made In Japan 83 Kulkarni Make P-57-26, 180 Mm Angle Grinder, 2100W, 8500 Rpm 84 Kulkarni Make P-55-02, 125 Mm Angle Grinder, 950 W, 10700 Rpm 85 Measuring Tape Cosmos Make 3 Mtr. 86 5 Mtr. 87 15Mtr. 88 Oil Cane 89 Hammer Tata 3 Lbs. 90 -Do- 10 Lbs. 91 Indef ‘P’ Model Chain Pulley Blocks 92 1 Ton. Capacity With 12 Mtr. Double Chain 93 Indef ‘P’ Model Chain Pulley Blocks 94 2 Ton. Capacity With 12 Mtr. Double Chain 95 Indef ‘P’ Model Chain Pulley Blocks 96 3 Ton. Capacity With 12 Mtr. Double Chain 97 ‘D’ Spanner, Jhalani Make 3-4 98 ‘D’ Spanner, Jhalani Make 3-4 43560 99 ‘D’ Spanner, Jhalani Make 3-4 43749 100 ‘D’ Spanner, Jhalani Make 3-4 43812 101 14-15 102 16-17 103 18-19 104 20-22 105 21-23 106 24-26 107 30-32 108 1 / 2 – 7 / 16 109 1 / 2 – 5 / 8 110 2.1 / 2- 3 111 5 / 16 X 1 / 4 112 3 / 8 X 7 / 16 113 5 / 8 X 3 / 4 114 3 / 4 X 7 / 8 115 7 / 8 X 1 116 1 Single End 117 ‘Ring’ Spanner, Jhalani Make 4-5 118 ‘Ring’ Spanner, Jhalani Make 43591 119 ‘Ring’ Spanner, Jhalani Make 43749 120 ‘Ring’ Spanner, Jhalani Make 43812 121 ‘Ring’ Spanner, Jhalani Make 14-15 122 16-17 123 18-19 124 20-22 125 21-23 126 24-26 127 30-32 128 1 / 2 – 7 / 16 129 1 / 2 – 5 / 8 130 2.1 / 2- 3 131 5 / 16 X 1 / 4 132 3 / 8 X 7 / 16 133 5 / 8 X 9 / 16 134 3 / 4 X 5 / 8 135 7 / 8 X 1 136 1 X 1? 137 Inside 6 ( Spring ) Caliper 138 Inside 12 ( Spring ) Caliper 139 Outside 6 ( Spring ) Caliper 140 Outside 12 ( Spring ) Caliper 141 Precise Cut Make Roller Grooving Tools 142 40 X 40 X 300 35º 143 40 X 40 X 300 40º 144 40 X 40 X 300 45º 145 40 X 40 X 300 50º 146 Precise Cut Make Maschert Grooving Tools 147 32 X 32 X 300 ( Tip 6 X 6 X 30 Mm ) 148 Power Master Make Tube Expanders 149 Expenders For Boiler Tubes With Mandrel ‘V’ Series, Suitable For The Tube Of 150 50.8 Mm Od 151 76.2 Mm Od 152 Tube Expander, ( H4 ) For The Tube Size 153 70.0 Mm Od 154 76.0 Mm Od 155 Tube Expender For The Tubes Of Pans, Evaporators, Juice Heaters, S.B. Series, For Top Plate Tube Expenders With Mandrel, Suitable For Brass Tube Of Size 156 102Mm Od X 98Mm Id 157 100Mm Od X 96Mm Id 158 45Mm Od X 42Mm Id 159 40Mm Od X 37Mm Id 160 Boiler Tube Expander With Mandrel 161 Model Af 1 / 63 With 3 / 4 Mandrel 162 Model Af 1 / 70 With 3 / 4 Mandrel 163 Model Af 1 / 77 With 1 Mandrel 164 Carborandum Make Grinding Wheel For Angle Grinder 7” ( 180Mm ) 165 5” ( 125Mm ) 166 Sander Disc 7” Carborandum Make 167 Tin Cutter 14 168 Tin Cutter 20 169 Miranda Make Carbide Tip ‘V” Shape 170 1” 35 O 171 1” 40 O 172 1” 45 O 173 1” 50 O 174 Left & Right 1 / 2 175 ----Do---- 3 / 4 176 Knurling Tool Rough Single Cut 1 Dia 1.1 / 2 177 Knurling Tool Rough Double Cut 1 Dia 1.1 / 2 178 L & Key Set Bsw 179 Metric ( Mm Size ) 180 Spanner Set Box 181 Mechanical Screw Jack 5 Ton Capacity 182 Kulkarni Make Hand Drill Machine 183 ( Heavy Duty With Small & Bia Tools ) 184 240V, 400 Watt, 10 Mm, Type Pr110, 3000 Rpm 185 Hand Grinder Machine 186 P-55-02 ( 125Mm 950W 10700 Rpm ) 187 Jack ( 30 Ton Capicity ) Pwm+H Okyk 188 Revolning Centre For Lath Machine Suitable For 2 No Socket 189 Revolning Centre For Lath Machine Suitable For 1 No Socket

INR 118 /-

INR 5000.0 /-

INR 3 Lakhs /-

Name of Work: TOOLS & TACKLE
	Sl. No.	TOOS AND TACKLE	Item Code / Make	Quantity	Units
1	1	High Speed Steel Tool Bit Miranda Triples Swastik S-400	High Speed Steel Tool Bit Miranda Triples Swastik S-400
2	2	1/4" x 6"	1/4" x 6"	1	Nos
3	3	3/8” x 6”	3/8” x 6”	1	Nos
4	4	1/2” x 6”	1/2” x 6”	1	Nos
5	5	3/ 4 “ x 4”	3/ 4 “ x 4”	1	Nos
6	6	3/ 4 “ x 6”	3/ 4 “ x 6”	1	Nos
7	7	1” x 6”	1” x 6”	1	Nos
8	8	Addission Make Taper Shunk Drill 1/16"	IT/Addission Make Taper Shunk Drill 1/16"	1	Nos
9	9	15/64"	15/64"	1	Nos
10	10	1/4"	1/4"	1	Nos
11	11	5/32"	5/32"	1	Nos
12	12	Addission Make Taper Shunk Drill 3/16"	IT/Addission Make Taper Shunk Drill 3/16"	1	Nos
13	13	7/32"	7/32"	1	Nos
14	14	13/32”	13/32”	1	Nos
15	15	5/16"	5/16"	1	Nos
16	16	7/16"	7/16"	1	Nos
17	17	17/32"	17/32"	1	Nos
18	18	21/32"	21/32"	1	Nos
19	19	11/16"	11/16"	1	Nos
20	20	Addission Make Taper Shunk Drill 1"	IT/Addission Make Taper Shunk Drill 1"	1	Nos
21	21	1.1/8"	1.1/8"	1	Nos
22	22	1.1/2"	1.1/2"	1	Nos
23	23	19.5 mm	19.5 mm	1	Nos
24	24	21 mm	21 mm	1	Nos
25	25	48 mm	48 mm	1	Nos
26	26	Straight Shrunk Drill Addison make 3 mm	Straight Shrunk Drill IT/Addison make 3 mm	1	Nos
27	27	5 mm	5 mm	1	Nos
28	28	6 mm	5.02	1	Nos
29	29	8 mm	8 mm	1	Nos
30	30	1/16"	1/16"	1	Nos
31	31	1/8"	1/8"	1	Nos
32	32	3/16"	3/16"	1	Nos
33	33	Bolt Tap BSP Totem Make set of 2 pcs 1/4"	Bolt Tap BSP Totem Make set of 2 pcs 1/4"	1	Nos
34	34	3/8"	3/8"	1	Nos
35	35	Bolt Tap “BSW” Totem make set of 3 Pcs. 3/8"	Bolt Tap “BSW” Totem make set of 3 Pcs. 3/8"	1	Nos
36	36	1/2"	1/2"	1	Nos
37	37	5/8”	5/8”	1	Nos
38	38	3/4"	7.03	1	Nos
39	39	5/16”	7.04	1	Nos
40	40	7/8"	7.05	1	Nos
41	41	1"	7.06	1	Nos
42	42	1.1/4"	7.07	1	Nos
43	43	Bolt Tap Metric Size Totem Make 4 mm	8	1	Nos
44	44	6 mm	8.01	1	Nos
45	45	8mm	8.02	1	Nos
46	46	10mm	8.03	1	Nos
47	47	Square H. S. Steel ( 20% Carbon) 1/2"	9	1	Nos
48	48	3/4"	9.01	1	Nos
49	49	1”	9.02	1	Nos
50	50	Grinding Wheel Carborandum Make	10	1	Nos
51	51	6” dia x 3/8” thick x ½ ” Bore Rough	11	1	Nos
52	52	-do- Fine	11.1	1	Nos
53	53	10” dia x 1” thick x 1” Bore Rough	11.2	1	Nos
54	54	-do- Fine	11.3	1	Nos
55	55	10” dia x 2” thick x 1” Bore Rough	11.4	1	Nos
56	56	-do- Fine	11.5	1	Nos
57	57	10” dia x 1 ½ ” thick x 1” Bore Rough	11.6	1	Nos
58	58	-do- Fine	11.7	1	Nos
59	59	Files ‘J&K’ Make Half Round (Rough) 10”	11.8	1	Nos
60	60	12"	12"	1	Nos
61	61	Files ‘J&K’ Make Half Round (Smooth ) 10”	Files ‘J&K’ Make Half Round (Smooth ) 10”	1	Nos
62	62	-do- 12”	-do- 12”	1	Nos
63	63	-do- 14”	-do- 14”	1	Nos
64	64	Files ‘J&K’ Make half round wood rasp 6"	Files ‘J&K’ Make half round wood rasp 6"	1	Nos
65	65	10"	10"	1	Nos
66	66	Files ‘J&K’ Make Flat (polish) 8”	Files ‘J&K’ Make Flat (polish) 8”	1	Nos
67	67	10"	10"	1	Nos
68	68	12"	12"	1	Nos
69	69	14"	14"	1	Nos
70	70	Drill Socket	Drill Socket	1	Nos
71	71	Pipe wrench Jhallani Make 8"	Pipe wrench Jhallani Make 8"	1	Nos
72	72	10"	10"	1	Nos
73	73	12"	12"	1	Nos
74	74	14”	14”	1	Nos
75	75	18”	18”	1	Nos
76	76	24”	24”	1	Nos
77	77	Die Nut Totem 1/2"	Die Nut Totem 1/2"	1	Nos
78	78	3/4"	17.1	1	Nos
79	79	5/8"	5/8"	1	Nos
80	80	24 mm	24 mm	1	Nos
81	81	Combination level	Combination level	1	Nos
82	82	Dial Vernier Caliper 300 mm Mitutoyo make, Made in Japan	Dial Vernier Caliper 300 mm Mitutoyo make, Made in Japan	1	Nos
83	83	Kulkarni Make P-57-26, 180 mm Angle Grinder, 2100W, 8500 RPM	Kulkarni Make P-57-26, 180 mm Angle Grinder, 2100W,	1	Nos
84	84	Kulkarni Make P-55-02, 125 mm Angle Grinder, 950 W, 10700 RPM	Kulkarni Make P-55-02, 125 mm Angle Grinder, 950 W, 10700 RPM	1	Nos
85	85	Measuring Tape Cosmos Make 3 Mtr.	Measuring Tape Cosmos Make 3 Mtr.	1	Nos
86	86	5 Mtr.	5 Mtr.	1	Nos
87	87	15Mtr.	15Mtr.	1	Nos
88	88	Oil Cane	Oil Cane	1	Nos
89	89	Hammer TATA 3 Lbs.	Hammer TATA 3 Lbs.	1	Nos
90	90	-do- 10 Lbs.	-do- 10 Lbs.	1	Nos
91	91	Indef ‘P’ Model Chain Pulley Blocks	26	1	Nos
92	92	1 Ton. capacity with 12 Mtr. double Chain	27	1	Nos
93	93	Indef ‘P’ Model Chain Pulley Blocks	28	1	Nos
94	94	2 Ton. capacity with 12 Mtr. double Chain	29	1	Nos
95	95	Indef ‘P’ Model Chain Pulley Blocks	30	1	Nos
96	96	3 Ton. capacity with 12 Mtr. double Chain	3 Ton. capacity with 12 Mtr. double Chain	1	Nos
97	97	‘D’ Spanner, Jhalani Make 3-4	‘D’ Spanner, Jhalani Make 3-4	1	Nos
98	98	‘D’ Spanner, Jhalani Make 3-4 43560		1	NOS
99	99	‘D’ Spanner, Jhalani Make 3-4 43749	43749	1	Nos
100	100	‘D’ Spanner, Jhalani Make 3-4 43812	43812	2	Nos
101	101	14-15	14-15	1	Nos
102	102	16-17	32.05	1	Nos
103	103	18-19	32.06	1	Nos
104	104	20-22	32.07	1	Nos
105	105	21-23	32.08	1	Nos
106	106	24-26	32.09	1	Nos
107	107	30-32	32.1	1	Nos
108	108	1/2" – 7/16"	32.11	1	Nos
109	109	1/2" – 5/8"	32.12	1	Nos
110	110	2.1/2"- 3"	32.13	1	Nos
111	111	5/16" x 1/4"	32.14	1	Nos
112	112	3/8" x 7/16"	32.15	1	Nos
113	113	5/8" x 3/4"	5/8" x 3/4"	1	Nos
114	114	3/4" x 7/8"	3/4" x 7/8"	1	Nos
115	115	7/8" x 1"	32.18	1	Nos
116	116	1" Single End	1" Single End	1	Nos
117	117	‘Ring’ Spanner, Jhalani Make 4-5	‘Ring’ Spanner, Jhalani Make 4-5	1	Nos
118	118	‘Ring’ Spanner, Jhalani Make 43591	‘Ring’ Spanner, Jhalani Make 43591	1	Nos
119	119	‘Ring’ Spanner, Jhalani Make 43749	‘Ring’ Spanner, Jhalani Make 43749	1	Nos
120	120	‘Ring’ Spanner, Jhalani Make 43812	‘Ring’ Spanner, Jhalani Make 43812	1	Nos
121	121	‘Ring’ Spanner, Jhalani Make 14-15	‘Ring’ Spanner, Jhalani Make 14-15	1	Nos
122	122	16-17	33.05	1	Nos
123	123	18-19	33.06	1	Nos
124	124	20-22	33.07	1	Nos
125	125	21-23	33.08	1	Nos
126	126	24-26	33.09	1	Nos
127	127	30-32	33.1	1	Nos
128	128	1/2" – 7/16"	33.11	1	Nos
129	129	1/2" – 5/8"	33.12	1	Nos
130	130	2.1/2"- 3"	33.13	1	Nos
131	131	5/16" x 1/4"	33.14	1	Nos
132	132	3/8" x 7/16"	33.15	1	Nos
133	133	5/8" x 9/16"	33.16	1	Nos
134	134	3/4" x 5/8"	33.17	1	Nos
135	135	7/8" x 1"	33.18	1	Nos
136	136	1" x 1?"	33.19	1	Nos
137	137	Inside 6" (Spring) Caliper	Inside 6" (Spring) Caliper	1	Nos
138	138	Inside 12" (Spring) Caliper	Inside 12" (Spring) Caliper	1	Nos
139	139	Outside 6" (Spring) Caliper	Outside 6" (Spring) Caliper	1	Nos
140	140	Outside 12" (Spring) Caliper	Outside 12" (Spring) Caliper	1	Nos
141	141	PRECISE CUT make Roller Grooving Tools	PRECISE CUT make Roller Grooving Tools	1	Nos
142	142	40 x 40 x 300 35º	40 x 40 x 300 35º	1	Nos
143	143	40 x 40 x 300 40º	40 x 40 x 300 40º	1	Nos
144	144	40 x 40 x 300 45º	40 x 40 x 300 45º	1	Nos
145	145	40 x 40 x 300 50º	40 x 40 x 300 50º	1	Nos
146	146	PRECISE CUT make Maschert Grooving Tools	PRECISE CUT make Maschert Grooving Tools	1	Nos
147	147	32 x 32 x 300 ( Tip 6 x 6 x 30 mm)	32 x 32 x 300 ( Tip 6 x 6 x 30 mm)	1	Nos
148	148	POWER MASTER MAKE TUBE EXPANDERS	POWER MASTER MAKE TUBE EXPANDERS	1	Nos
149	149	Expenders for Boiler Tubes with mandrel ‘V’ Series, suitable for the tube of	Expenders for Boiler Tubes with mandrel ‘V’ Series, suitable for the tube of	1	Nos
150	150	50.8 mm OD	50.8 mm OD	1	Nos
151	151	76.2 mm OD	76.2 mm OD	1	Nos
152	152	Tube Expander, ( H4 ) for the tube size	Tube Expander, ( H4 ) for the tube size	1	Nos
153	153	70.0 mm OD	70.0 mm OD	1	Nos
154	154	76.0 mm OD	76.0 mm OD	1	Nos
155	155	Tube expender for the Tubes of PANS, EVAPORATORS, JUICE HEATERS, S.B. Series, for top plate tube expenders with mandrel, suitable for Brass tube of Size	Tube expender for the Tubes of PANS, EVAPORATORS, JUICE HEATERS, S.B. Series, for top plate tube expenders with mandrel, suitable for Brass tube of Size	1	Nos
156	156	102mm OD x 98mm ID	102mm OD x 98mm ID	1	Nos
157	157	100mm OD x 96mm ID	100mm OD x 96mm ID	1	Nos
158	158	45mm OD x 42mm ID	45mm OD x 42mm ID	1	Nos
159	159	40mm OD x 37mm ID	40mm OD x 37mm ID	1	Nos
160	160	Boiler Tube Expander with mandrel	Boiler Tube Expander with mandrel	1	Nos
161	161	Model AF 1/63 with 3/4" mandrel	Model AF 1/63 with 3/4" mandrel	1	Nos
162	162	Model AF 1/70 with 3/4" mandrel	Model AF 1/70 with 3/4" mandrel	1	Nos
163	163	Model AF 1/77 with 1" mandrel	Model AF 1/77 with 1" mandrel	1	Nos
164	164	Carborandum Make Grinding Wheel for Angle Grinder 7” ( 180mm )	Carborandum Make Grinding Wheel for Angle Grinder 7” ( 180mm )	1	Nos
165	165	5” ( 125mm )	5” ( 125mm )	1	Nos
166	166	Sander Disc 7” Carborandum Make	Sander Disc 7” Carborandum Make	1	Nos
167	167	Tin Cutter 14"	Tin Cutter 14"	1	Nos
168	168	Tin Cutter 20"	Tin Cutter 20"	1	Nos
169	169	Miranda Make Carbide Tip ‘V” Shape	Miranda/Sandvik/Vidia Make Carbide Tip ‘V” Shape	1	Nos
170	170	1” 35 o	1” 35 o	1	Nos
171	171	1” 40 o	1” 40 o	1	Nos
172	172	1” 45 o	1” 45 o	1	Nos
173	173	1” 50 o	1” 50 o	1	Nos
174	174	Left & Right 1/2"	Left & Right 1/2"	1	Nos
175	175	----do---- 3/4"	----do---- 3/4"	1	Nos
176	176	Knurling Tool Rough single cut 1" Dia 1.1/2"	Knurling Tool Rough single cut 1" Dia 1.1/2"	1	Nos
177	177	Knurling Tool Rough Double cut 1" Dia 1.1/2"	Knurling Tool Rough Double cut 1" Dia 1.1/2"	1	Nos
178	178	L & Key Set BSW	L & Key Set BSW	1	Nos
179	179	Metric (mm Size)	Metric (mm Size)	1	Nos
180	180	Spanner Set Box	Spanner Set Box	1	Nos
181	181	Mechanical Screw Jack 5 Ton capacity	Mechanical Screw Jack 5 Ton capacity	1	Nos
182	182	Kulkarni Make Hand Drill Machine	Kulkarni Make Hand Drill Machine	1	Nos
183	183	(Heavy Duty With Small & bia Tools)	(Heavy Duty With Small & bia Tools)	1	Nos
184	184	240v, 400 watt, 10 mm, Type PR110, 3000 RPM	240v, 400 watt, 10 mm, Type PR110, 3000 RPM	1	Nos
185	185	Hand Grinder Machine	Hand Grinder Machine	1	Nos
186	186	P-55-02(125mm 950W 10700 RPM)	P-55-02(125mm 950W 10700 RPM)	1	Nos
187	187	Jack (30 Ton Capicity) pwM+h okyk	Jack (30 Ton Capicity) pwM+h okyk	1	Nos
188	188	Revolning centre for lath machine suitable for 2 No socket	Revolning centre for lath machine suitable for 2 No socket	1	Nos
189	189	Revolning centre for lath machine suitable for 1 No socket	Revolning centre for lath machine suitable for 1 No socket	1	Nos