Tender For Certain B/R And Electromechanical Repair Works To 164 Mh, 320 Fd Hospital And 420 Hospital Under Ge (North) Binnaguri
Tender Value
45 Lakhs
Estimated cost
Bid Submission
18 Sep 2019
0 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Binnaguri → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Certain B / R And Electromechanical Repair Works To 164 Mh, 320 Fd Hospital And 420 Hospital Under Ge ( North ) Binnaguri
BOQ
| Name of Work: CERTAIN B/R AND E/M REPAIR WORKS TO 164 MH, 320 FD HOSPITAL AND 420 HOSPITAL UNDER GE (NORTH) BINNAGURI | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | SCHEDULE A B/R PORTION\nDisconnecting existing water tanks and setting aside exceeding 500 ltrs and n. exc 1000 ltrs and refixing the same in the same place after repairs works complete all as specified and as directed. | BI01010001010000000000000515BI0100001113 | 2 | Each |
| 2 | 2 | Demolition of existing roof treatment complete of any description and in Taking down existing tarfelt including tiles, lime concrete and screed bed complete from roof surfaces including parapets and lowering and removing the same to a distance exc. 50m and n. exc. 100m including roughening of old concrete surface of roof , cleaning the surface by wire brushing to remove all loose dust etc complete all as specified and directed. | BI01010001010000000000000515BI0100001114 | 200 | Per\nSqm |
| 3 | 3 | Material and labour for 15mm thick screed bed or bedding layers in cement mortar (1:4) in order to maintain proper slope over existing roof surfaces finished even and smooth without using extra cement for receiving treatment complete all as specified and directed. | BI01010001010000000000000515BI0100001115 | 200 | Per\nSqm |
| 4 | 4 | Material and labour for water proofing treating to RCC roof with providing and applying single component acrylic polymer modified, fibre reinforced waterproof coating brushbond Roof Guard in 3 coats (white, grey and terracotta) of application @ 0.5 litre /sqm coat, including sprinkling of clean sand (300 microns - particle size).The product should have following properties solid content : 70%, tensite strength (ASTM D 412): 1.10 MPs, elongation (ASTM D12) : 100% Resistance to ageing due to UV radiation . 1000 hours no change rapid chloride penetration : very low resistane to algae growth passes, zero rating / permeability (mm): 5.0 water vapour transmission : 6.0gm/sqm h No of coats : 3 (minimum) adhesive bond strength : > 0.92 N/mm2 complete all as directed. | BI01010001010000000000000515BI0100001116 | 200 | Per\nSqm |
| 5 | 5 | Dismantling PVC water tanks exceeding 500 litres but not exceeding 1000 litres capacity, including removing ball valve and removing unserviceable tank from work site complete all as specified\n | BI01010001010000000000000515BI0100001117 | 5 | Each |
| 6 | 6 | Supply and fixed rotational moulded poly-ethylene multilayer water storage tanks ( cylinderical vertical with closed top ) 1000 litres capacity ,hoisted and fixed in position including ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms complete , screwed for 20 mm bore dia. pipe or brass ferrule complete all as specified.\n\n | BI01010001010000000000000515BI0100001118 | 5 | Each |
| 7 | 7 | Supply and fixed fixed in repairs ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms complete , screwed for 20 mm bore dia. pipe or brass ferrule complete all as specified.\n | BI01010001010000000000000515BI0100001119 | 10 | Each |
| 8 | 8 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), in floors, aprons etc .laid dry or laid dry and pointed including removing of demolished material from work site at any distance outside MD land complete all as specified and directed.complete all as specified.\n\n | BI01010001010000000000000515BI0100001120 | 200 | Per\n Sqm |
| 9 | 9 | Demolition of cement concrete ( unreinforced ) in ground floors and pavings not exceeding 15 cm thick above or below ground level, including removing of demolished material from work site at any distance outside MD land complete all as specified and directed.\n | BI01010001010000000000000515BI0100001121 | 6 | Per\nCum |
| 10 | 10 | Material and labour for 75mm thick PCC (1:3:6), type C-2 (using 40 mm graded crushed stone aggregate ) as in plinth protection; pathway / hardstanding etc laid in bays / panels not exc. 2.00 Sqm each including construction joints at suitable interval and each corner and filled with bituminous mastic filling (1 part bitumen & 3 part sand) and finished the surface even and smooth without using extra cement complete all as specified. | BI01010001010000000000000515BI0100001122 | 50 | Per\nSqm |
| 11 | 11 | Material and labour for plain cement concrete type B-0 (1:2:4), using 12.5 mm graded crushed stone aggregate, 25 mm thick , as in sub base/ padding of roof slab WPT complete all as specified.\n | BI01010001010000000000000515BI0100001123 | 50 | Per\nSqm |
| 12 | 12 | Material and labour for 60 mm thick Machine pressed precast conctete interlocking paver block chemically treated any shape , size and colour confirming to IS 15658-2006 of M-35 Grade with grey cement and pigment over and including 50 mm thick sand cushion spread and laid levelled in layers complete all as specified. | BI01010001010000000000000515BI0100001124 | 50 | Per\nSqm |
| 13 | 13 | Material and labour for 10 mm thick vitrified ceramic (square/rectangular) dark shade coloured polished tiles, (1st quality) area of each tiles not exc 0.38 sqm and 10mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white cement and pigment to match over and including 15 mm thick screeding in CM 1:4 complete all as specified ( Note : screed bed shall not be measured and paid separately).\n\n | BI01010001010000000000000515BI0100001125 | 100 | Per\nSqm |
| 14 | 14 | Material and labour for Non Skid ceramic coloured tiles (1st quality) 7 to 8mm thick ( square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. over and including 15 mm thick screeding in CM 1:4 complete all as specified\n( Note : screed bed shall not be measured and paid separately).\n\n | BI01010001010000000000000515BI0100001126 | 50 | Per\nSqm |
| 15 | 15 | Material and labour for glazed ceramic coloured / digital printed of size (300 x 200 mm / 300 x 450 mm x 7 mm thick ) as in vertical surfaces such as skirting/dado / riser to steps etc conforming to IS - 13712 grade IB-III set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including cement screed bed / backing layer of 10mm thick in cement mortar (1:3) complete all as specified and as directed.\n(Note : screed bed shall also deemed to be included in the quoted rate by the contractor ).\n | BI01010001010000000000000515BI0100001127 | 50 | Per\nSqm |
| 16 | 16 | Material and labour 16-18 mm thick Granite ( of any type) work ( table rubbed and polished) in steps , jambs, pillars, window cills, cooking plateforms and like in cement mortar ( 1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 20mm thick screeding in CM 1:4 complete all as specified.\n( Note Screed bed shall not be measured and paid separately).\n\n | BI01010001010000000000000515BI0100001128 | 10 | Per\nSqm |
| 17 | 17 | Material and labour for machine pressed prepolished chemically treated coloured chequered cement concrete tiles of size 300 mm x 300 mm x 25 mm thick set, jointed and pointed in neat slurry in floors and steps with grey cement and pigments laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified \n(Note screed bed shall not be measured and paid separately).\n\n | BI01010001010000000000000515BI0100001129 | 50 | Per\nSqm |
| 18 | 18 | Dismantling of old corrugated steel sheets/ plain steel sheet in roof coverings including ridges, removing of unserviceable material from work site complete all as specified and as directed. | BI01010001010000000000000515BI0100001130 | 100 | Per\nSqm |
| 19 | 19 | Supply and fixed Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified. | BI01010001010000000000000515BI0100001131 | 100 | Per\nSqm |
| 20 | 20 | Supply and fixed Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in as in ridges, valley, eaves, etc with self tapping screws as specified. | BI01010001010000000000000515BI0100001132 | 15 | Per\nRM |
| 21 | 21 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, removing of unserviceable material from work site complete all as specified and as directed. | BI01010001010000000000000515BI0100001133 | 2 | Per\nQuintal |
| 22 | 22 | Supply and fixed rolled mild steel in roof trusses, ( framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing ( Beam, tee,angle,channel or flat sections ) including distance pieces , cleats etc. grade Fe-410-W ( Gde-E-250) quality -B complete all as specified. | BI01010001010000000000000515BI0100001134 | 200 | Per\nKg |
| 23 | 23 | All as per item No. 22 here in before but except mild steel work complete all as specified and as directed. \nNote : Servicebale Mild Steel work obtain for dismantling shall be reuse). | BI01010001010000000000000515BI0100001135 | 100 | Per\nKg |
| 24 | 24 | Hacking out old broken glass ( any thickness , size , quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads upto 1.5 sqm complete all as specified.\n | BI01010001010000000000000515BI0100001136 | 38 | Per\nSqm |
| 25 | 25 | Supply and fixing 3 mm thick (nominal) Sheet glass, ordinary quality , in squares, not exceeding 0.50 sqm each each pane fixed with oil putty complete all as specified.\n | BI01010001010000000000000515BI0100001137 | 38 | Per\nSqm |
| 26 | 26 | Supply and fixing 3 mm thick figured glass, pin head type and ordinary quality , in squares, not exceeding 0.50 sqm each each pane fixed with oil putty complete all as specified.\n | BI01010001010000000000000515BI0100001138 | 6 | Per\nSqm |
| 27 | 27 | Suppy and fixed in repairs, aluminium anodized louvered ventilators with glass louvers , without sash bars, of aluminium sections weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings and with suitable locking arrangements tc.complete all as specified.\n | BI01010001010000000000000515BI0100001139 | 3.36 | Per\nSqm |
| 28 | 28 | Material and labour for applying rust removing chemical to hinges of steel window shutter n.exc 1sqm each, removing all rusts/scaling, dirt etc from the hinges by wire brushing incl necessary black smith work if required for making the shutter operational and finally greasing hinge joints for smooth functioning of steel window shutter complete all as directed. | BI01010001010000000000000515BI0100001140 | 15 | Each\nShutter |
| 29 | 29 | Materials and labour for repairs to hinges of steel window/ventilators with necessary welding,cutting by gas cutter etc complete all as specified and directed. | BI01010001010000000000000515BI0100001141 | 10 | Each\n |
| 30 | 30 | Supply and fixed in repairs Steel windows or ventilators with top/side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars , dovetailed or welded complete all as specified.\n\n\n | BI01010001010000000000000515BI0100001142 | 15 | Per\nSqm |
| 31 | 31 | Supply and fixed in repairs factory made Steel windows or ventilators with top/side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars , dovetailed or welded complete all as specified.\n\n\n | BI01010001010000000000000515BI0100001143 | 15 | Per\nSqm |
| 32 | 32 | Material and labour for repairing, securing glass of any description in existing wooden frames glazed with putty/beads including removing loose or decayed putty/beads,painting/oiling one coat on rebates grooves reputtying and painting/oil putty surface to match existing complete all as specified.\n\n | BI01010001010000000000000515BI0100001144 | 25 | Per\nRm |
| 33 | 33 | Supply and fixed in repairs mild steel framed work such as grills , gratings, etc., with ends of bars shouldered and/ or riveted, or forged in to spikes; framed guard bars ; barred iron doors; ladders; framed balusters ; walk ways ; railings; frame work of water tanks and similar work conforming to Fe-290-Gde E-165 complete all as specified and directed. | BI01010001010000000000000515BI0100001145 | 300 | Per\n Kg |
| 34 | 34 | Supply and fixed in repairs of steel window handles, left/right copper oxide coating with nut bolt & washers complete all as directed.\n\n | BI01010001010000000000000515BI0100001146 | 10 | Each |
| 35 | 35 | Supply and fixed in repairs ofof peg stay 300mm long with 3/4 holes stove enamelled black suitable for existing steel windows including welding of necessary cleat to existing window nut/bolts complete all as directed. | BI01010001010000000000000515BI0100001147 | 10 | Each |
| 36 | 36 | Material and labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamelled paint (1st quality) over one coat of red oxide Zinc chrome primer complete all as specified.\n | BI01010001010000000000000515BI0100001148 | 70 | Per\nSqm |
| 37 | 37 | Taking down chowkats with shutter (without taking off shutter from the frame) n. exc 1.5 Sqm each etc including removing material from work site complete all as specified and directed. | BI01010001010000000000000515BI0100001149 | 15 | Each |
| 38 | 38 | Supply and Fixing solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supply & fixing in opening as per specification & drawing and as directed. | BI01010001010000000000000515BI0100001150 | 75 | Per\nRM |
| 39 | 39 | Supply and Fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side as gap insert for top rails bottom rail, panelling of plain colour PVC sheet to be fitting in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drg and as directed. | BI01010001010000000000000515BI0100001151 | 21 | Per\nSqm |
| 40 | 40 | All as per item Ser No 39 here in before but partly gauzed partly paneled i.e upper pannel will be wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly and lower pannel will be plain colour PVC sheet complete all as specified | BI01010001010000000000000515BI0100001152 | 20 | Per\nSqm |
| 41 | 41 | Supply and Fixed of 75 mm long stainless steel butt hinges with mild steel hinge pin complete all as specified and directed. | BI01010001010000000000000515BI0100001153 | 45 | Each |
| 42 | 42 | Supply and fixing of aluminium, anodised, barrel tower bolts of extruded section and fixed, 150 mm length of bolt complete all as specified.\n | BI01010001010000000000000515BI0100001154 | 50 | Each |
| 43 | 43 | Supply and Fixing of aluminium handle cast type anodised 150 mm size etc complete all as specified and directed. | BI01010001010000000000000515BI0100001155 | 50 | Each |
| 44 | 44 | Taking down chowkats with shutter (without taking off shutter from the frame) exc 1.5 Sqm but n exc 4 sqm each etc including removing material from work site complete all as specified and directed. | BI01010001010000000000000515BI0100001156 | 10 | Each |
| 45 | 45 | Supply and fixed rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces,etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening .grade Fe-410-W ( Gde-E-250) quality -B including dismantling of old rusted structuralsteel and removing from site complete all as specified. | BI01010001010000000000000515BI0100001157 | 400 | Per\nKg |
| 46 | 46 | Material and labour for mild steel flat iron, as in wind ties or as in hold fast, hooks for hanging fans , clamps, supports for rainwater, ventilating pipes, including bolts,including drilling holes, notching for wire , etc.; flat iron fillets ( for securing wire mesh etc. including all necessary drilling , bolting or rivetting , etc., and similar work conforming to Fe-290-Gde E-165 all as specified and directed.\n | BI01010001010000000000000515BI0100001158 | 5 | Per\nKg |
| 47 | 47 | Supply and fixed 35 mm thick factory made door Flush shutters , solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed. | BI01010001010000000000000515BI0100001159 | 20 | Per\nSqm |
| 48 | 48 | Supply and Fixing in repairs 300 mm long, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. | BI01010001010000000000000515BI0100001160 | 5 | Each |
| 49 | 49 | Supply and fixing 300 mm long Aluminium alloy. Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified.\n | BI01010001010000000000000515BI0100001161 | 20 | Each |
| 50 | 50 | Supply and fixed in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.\n | BI01010001010000000000000515BI0100001162 | 30 | Per\nSqm |
| 51 | 51 | Supply and fixed stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.\n | BI01010001010000000000000515BI0100001163 | 10 | Per\nSqm |
| 52 | 52 | Material and labour for preparation of untreated new wooden surface of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint, (1 st quality) with a coat of pink primer all as specified and directed. | BI01010001010000000000000515BI0100001164 | 52 | Per\nSqm |
| 53 | 53 | Supply and fixing of 150 mm brass floor door stopperfixed in position complete all as specified and as directed. | BI01010001010000000000000515BI0100001165 | 10 | Each |
| 54 | 54 | S & F in repair special pivot for aluminium door made up of aluminium die cast body complete all as specified. | BI01010001010000000000000515BI0100001166 | 5 | Pair |
| 55 | 55 | Supply and fixed in repairs 600mm x 450mm bevelled edge mirror 5.5mm thick of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with CP Brass screws and cup washers complete all as specified. | BI01010001010000000000000515BI0100001167 | 20 | Each |
| 56 | 56 | Supply and fixed in repairs Cast Brass chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union in repairs complete all as specified. | BI01010001010000000000000515BI0100001168 | 10 | Each |
| 57 | 57 | Supply and fixed in repairs low level flushing cistern (dual-flush), 9-10 litres capacity ISI marked embossed moulded from virgin poly propylene including flush pipe complete all as specified and directed. \n | BI01010001010000000000000515BI0100001169 | 20 | Each |
| 58 | 58 | Supply and fixed in repairs good quality rubber washers for low level flushing cistern complete all as directed. | BI01010001010000000000000515BI0100001170 | 20 | Each |
| 59 | 59 | Supply & Fixed in repair good quality PVC syphon for low level flushing cistern 0f 10ltrs capacity complete all as directed. | BI01010001010000000000000515BI0100001171 | 20 | Each |
| 60 | 60 | Supply and fixing in repairs CP Brass Tubular towel rail, 20 mm dia. D type, 60 cm long between flanges complete all as specified. | BI01010001010000000000000515BI0100001172 | 20 | Per\nRm |
| 61 | 61 | Supply and fixing in repairs of CP brackets for CP towel rails complete all as specified and as directed. | BI01010001010000000000000515BI0100001173 | 10 | Each\nPair |
| 62 | 62 | Supply and fixing in repairs of CP napkin ring of 8mm dia fixed in position with brass CP screws complete all as specified and as directed. | BI01010001010000000000000515BI0100001174 | 10 | Each\nPair |
| 63 | 63 | Supply and fixed in repair, pillar taps, fancy type, cast copper alloy , with capstan heads, chromium plated , screwed down for 15 mm bore pipe,high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe complete all as specified.\n\n | BI01010001010000000000000515BI0100001175 | 20 | Each |
| 64 | 64 | Supply and fixed in repairs, Chromium plated Bib taps with cup , cast copper alloy with crutch handle, screwed for 15 mm bore dia. iron pipe or for brass ferrule and fixed complete all as specified. \n | BI01010001010000000000000515BI0100001176 | 40 | Each |
| 65 | 65 | Supply and fixed in repair CP stop cock fancy type, screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified .\n | BI01010001010000000000000515BI0100001177 | 25 | Each |
| 66 | 66 | Supply and fixed in repair, CP stop cock ( concealed type) long fancy type screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified | BI01010001010000000000000515BI0100001178 | 10 | Each |
| 67 | 67 | Supply and fixed in repairs of Vitreous China bowl urinal flat back, size of 465x355x265 mm White ( minimum) including providing and fixing plugs, bedding the urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement and providing grating and union for discharge pipe including 32mm bore PVC discharge pipe complete all as specified and as directed. \n\n | BI01010001010000000000000515BI0100001179 | 10 | Each |
| 68 | 68 | Supply and fixed in repairs vitreous china wash basin (WHB) , white , flat back , size 550 mm x 400 mm (1st quality) including brackets, waste fittings , brass Chromium plated for glazed basins etc. with long screw shanks and fly nuts , flange end embedded in red lead cement , including cutting for and pinning in ends of brackets or erecting stand but but incl providing brackets, waste pipe & CP waste coupling complete all as specified and as directed.\n | BI01010001010000000000000515BI0100001180 | 20 | Each |
| 69 | 69 | Supply and fixed in repairs vitreous china wash down water closet pan (pedestal pattern) EWC, of size 520 x 360 x 390 mm with ‘P’ or `S' trap, including fixing bolts, Plastic water closet seat and cover, closed pattern with flat bottom, and mild steel chromium plated or aluminised hinging device, including PVC low level flushing cistern including making all necessary connections complete all as specified and as directed.\n\n | BI01010001010000000000000515BI0100001181 | 8 | Each |
| 70 | 70 | Supply and fixed in repairs PTMT connections 15 mm size with PVC nuts of length 450 mm complete all as specified.\n | BI01010001010000000000000515BI0100001182 | 40 | Each |
| 71 | 71 | Supply and fixed in repairs of grating doom 75 mm dia of PTMT (Minimum weight 25gms) complete all as specified.\n | BI01010001010000000000000515BI0100001183 | 30 | Each |
| 72 | 72 | Supply and fixed in repairs of 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified.\n | BI01010001010000000000000515BI0100001184 | 50 | Per\nRm |
| 73 | 73 | Supply and fixed in repairs of 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified.\n | BI01010001010000000000000515BI0100001185 | 20 | Per\nRm |
| 74 | 74 | Supply and fixed for 110mm dia PVC (SWR) bend of any radius for PVC (SWR) pipes, fixed to walls or fixed to steel gutter complete all as directed.\n | BI01010001010000000000000515BI0100001186 | 10 | Each |
| 75 | 75 | Supply and fixed for 75mm dia PVC (SWR) bend of any radius for PVC (SWR) pipes, fixed to walls or fixed to steel gutter complete all as directed.\n | BI01010001010000000000000515BI0100001187 | 10 | Each |
| 76 | 76 | Supply and fixed in repair PVC waste pipe with CP waste coupling including flexible suitable for wash hand basin or urinal, 32 mm dia complete all as specified. | BI01010001010000000000000515BI0100001188 | 20 | Each |
| 77 | 77 | Taking up or down steel tubing and connections, including cleaning for re-fixing and removal of unserviceable pipe from work site,15 mm bore dia all as specified.\n\n | BI01010001010000000000000515BI0100001189 | 100 | Per\nRM |
| 78 | 78 | Taking up or down steel tubing and connections, including cleaning for re-fixing and removal of unserviceable pipe from work site, 20 mm bore dia all as specified.\n\n | BI01010001010000000000000515BI0100001190 | 60 | Per\nRM |
| 79 | 79 | Supplying, laying, jointing and testing 15 mm nominal bore dia,CPVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or laid in floors etc, any type of pipe including necessary fittings and jointing complete all as specified and as directed.\n\n | BI01010001010000000000000515BI0100001191 | 90 | Per\nRM |
| 80 | 80 | Supplying, laying, jointing and testing 20 mm nominal bore dia,CPVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or laid in floors etc, any type of pipe including necessary fittings and jointing complete all as specified and as directed.\n\n | BI01010001010000000000000515BI0100001192 | 50 | Per\nRM |
| 81 | 81 | Refixing old steel tubing and connections in new or old position ( walls, ceiling , floors, etc.)15 mm nominal bore dia, including new fittings complete all as specified \n( Note:- Refixing means including cleaning down existing pipes and fittings. )\n | BI01010001010000000000000515BI0100001193 | 10 | Per\nRM |
| 82 | 82 | Refixing old steel tubing and connections in new or old position ( walls, ceiling , floors, etc.) 20 mm nominal bore dia, including new fittings complete all as specified \n( Note:- Refixing means including cleaning down existing pipes and fittings. )\n | BI01010001010000000000000515BI0100001194 | 10 | Per\nRM |
| 83 | 83 | Labour for opening of air lock/blockage in GI pipe line from out let of water tank to all internal GI pipes fittings to smooth flow of water from Bib taps / Shower / Pillar tap /Stop valves complete by Air pressure/ water gravity pressure etc complete all as specified and directed. | BI01010001010000000000000515BI0100001195 | 20 | Each\nJob |
| 84 | 84 | Taking down cement plaster on brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water, any description etc.including removing of rubbished material from work site complete all as specified.\n | BI01010001010000000000000515BI0100001196 | 500 | Per\nSqm |
| 85 | 85 | Material and labour for rendering 10 mm thick on fair faces of brick work or concrete surfaces , in cement and sand mortar 1:4 using water liquid water proofing compound @ 200 ml per bag of cement or as per manufacturer's instructions (WPC shall be measured and paid separately) complete all as specified top surfaces finished even and smooth without using extra cement complete all as specified.\n | BI01010001010000000000000515BI0100001197 | 50 | Per\nSqm |
| 86 | 86 | Material and labour for rendering 15 mm thick (10+5) in two layers on fair faces of brick work or concrete surfaces , in cement and sand mortar 1:4 using water liquid water proofing compound @ 200 ml per bag of cement or as per manufacturer's instructions (WPC shall be apply in second layer and measured and paid separately) complete all as specified top surfaces finished even and smooth without using extra cement complete all as specified.\n | BI01010001010000000000000515BI0100001198 | 200 | Per\nSqm |
| 87 | 87 | Material and Labour for rendering 15 mm thick on fair faces of brick or concrete surfaces finishing surfaces even and smooth without using extra cement in Cement mortar 1:6 all as specified and directed. | BI01010001010000000000000515BI0100001199 | 280 | Per\nSqm |
| 88 | 88 | Material and labour for rendering 5mm thick on concrete surfaces in ceiling , in cement and sand mortar 1:3 complete all as specified \n\n | BI01010001010000000000000515BI0100001200 | 50 | Per\nSqm |
| 89 | 89 | Supply only Integral liquid water proofing compound conforming to IS-2645-2003 complete all as specified. | BI01010001010000000000000515BI0100001201 | 15 | Per\nLtr |
| 90 | 90 | Material and labour for preparation of new surfaces of walls and applying wall care white (Putty) thickness and sand papering surfaces to achieve smooth surfaces and applying two coats exterior emulsion paint 100% acrylic, white or any tinted, over a coat of cement based primer including washing floors, cleaning glass, joinery,electrical fittings, wiring etc., of drops and splashes complete all as specified .\n | BI01010001010000000000000515BI0100001202 | 50 | Per\nSqm |
| 91 | 91 | Material and labour for preparation of new surfaces of walls and applying wall care white putty and sand papering surfaces to achieve smooth surfaces and applying two coats of acrylic based distemper emulsion over a coat of cement based primer, white or tinted including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .\n | BI01010001010000000000000515BI0100001203 | 280 | Per\nSqm |
| 92 | 92 | Material and labour fo preparation of new plastered or unplastered surafces of ceilings and applying three coats of white wash including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .\n\n | BI01010001010000000000000515BI0100001204 | 50 | Per\nSqm |
| 93 | 93 | Material and labour for preparation of new/untreated surfaces/ of walls and applying applying two coats of cement base paint including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .\n | BI01010001010000000000000515BI0100001205 | 200 | Per\nSqm |
| 94 | 94 | Suppy and fixed in repairs, powder coated anodised aluminium frame (sections weighing not less than 1.40kg/mtr) made of Square/tubular Aluminium section for door with one or more rebates jointing cleat for fixing etc and provision of aluminium door shutter (Single/Double shutter) including necessary jointing cleats glazing clips, rubber gasket aluminium anodised snap beading, screws, hold fast, Aluminium hinges 3Nos 100mm long for each shutter, floor stopper, locking arrangements handle, 5.5mm thick tinted glass fixed in panels with aluminium guard bar complete all as directed.\n | BI01010001010000000000000515BI0100001206 | 10 | Per\nSqm |
| 95 | 95 | Suppy and fixed in repairs, powder coated aluminium window sliding type three track (one gauge and two glazed shutter) aluminium sections weighing not less than 0.55 Kg per mtr for shutter and aluminium section weighing not less than 1.67 kg per mtr for frame including necessary jointing cleats, glazing cleats, rubber packing, screws, handle, locking arrangement etc complete and 5.5 mm thick tinted glass and stainless steel mosquito proof gauge including powder coated aluminium deco grill having mesh size not less than 65mm x 65mm with guard bar not less than 6 mm dia fixed to flat aluminium window with C or F frmae of aluminium including making good the disturb surfcaes and finishing complete all as specified and directed. | BI01010001010000000000000515BI0100001207 | 10 | Per\nSqm |
| 96 | 96 | Resucuring or easing & adjusting, taking down aluminium door shutter not exc. 2sqm each and refixing in the same opening after certain repairs to shutter floor top self closing device, top pivot including changing rubber beading, fiber beading, handles etc, complete all as directed. | BI01010001010000000000000515BI0100001208 | 10 | Per\nLeaf |
| 97 | 97 | Supply & fixing in repair Double action floor spring hydraulically regu-lated made up of mini-mum 1.25 mm thick alu-minium alloy sheet foun-dation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.\n | BI01010001010000000000000515BI0100001209 | 10 | Each |
| 98 | 98 | Supply and fixing in repairs 5.5mm thick tinted glass, fixed with existing snap beading, rubber gasket etc. area of each pane exc. 0.50 sqm complete all as specified and as directed.\n | BI01010001010000000000000515BI0100001210 | 20 | Per\nSqm |
| 99 | 99 | Supply and fixing in repairs aluminium body ( extruded section ) body Door closer hydraulically regulated, designation No. 3, universal type , suitable for door shutters 851 to 1000 mm in width and of weight between 61 to 80kg complete all as specified.\n | BI01010001010000000000000515BI0100001211 | 10 | Each |
| 100 | 100 | Demolition of RCC any thickness and any size as in columns, roof slab, chajja, facia and beam etc complete all as specified and as directed complete all as specified and directed. | BI01010001010000000000000515BI0100001212 | 2 | Per\nCum |
| 101 | 101 | M&L for RCC type B1 (1:2:4) (using 20mm grade crushed stone aggregate) as in beams,cantilevers, bressumers, lintels, chajjas etc at a height 10m with necessary finishes complete all as specified and directed. | BI01010001010000000000000515BI0100001213 | 2 | Per\nCum |
| 102 | 102 | Material and labour for Mild steel deformed or twisted bars ( TMT) 8/10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. or higher complete all as specified.\n | BI01010001010000000000000515BI0100001214 | 500 | Per\nKg |
| 103 | 103 | Material and labour for Mild steel deformed or twisted bars ( TMT) \n 5 mm dia and over upto and including 10 mm dia , as in stirrups , spaces, binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. or higher complete all as specified.\n | BI01010001010000000000000515BI0100001215 | 200 | Per\nKg |
| 104 | 104 | Material and labour for use and waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams for flat rough finished complete all as specified.\n | BI01010001010000000000000515BI0100001216 | 10 | Per\nSqm |
| 105 | 105 | Demolition Brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles including removing of demolished materialfrom work site complete all as specified.\n | BI01010001010000000000000515BI0100001217 | 9.25 | Per\nCum |
| 106 | 106 | Material and labour for brickwork with fly ash bricks, old size, having compressive strength 75Kg sqcm, straight or curved on plan excd 6 M mean radius in built in cement and sand mortar 1:6 complete all as specified.\n | BI01010001010000000000000515BI0100001218 | 8 | Per\nCum |
| 107 | 107 | Material and labour for brickwork with fly ash bricks, old size, straight or curved on plan to any radius in half brick thick walls built in cement and sand mortar 1:4 complete all as specified.\n | BI01010001010000000000000515BI0100001219 | 10 | Per\nSqm |
| 108 | 108 | Supply and fixed in repairs chromium plated health faucet 8 mm dia alongwith 1m flexible tube and wall hook fixed in position complete all as directed.\n. \n | BI01010001010000000000000515BI0100001220 | 4 | Each |
| 109 | 109 | Supply and fixed in repairs CP Brass water Jet assembly with flexible PVC pipe 1.0 metre length connector to EWC water closet complete all as specified. | BI01010001010000000000000515BI0100001221 | 4 | Each |
| 110 | 110 | Supply and fixing in repairs Plastic water closet seat, white, closed pattern with flat bottom , and cover and PVC hinging device complete all as specified.\n\n | BI01010001010000000000000515BI0100001222 | 4 | Each |
| 111 | 111 | Supply and fixed in repairs decorative type curtain rod 25 mm dia chromium plated with fixing brackets, stops, rollers etc all approved by Engineer- in-Charge complete all as specified and as directed.\n\n | BI01010001010000000000000515BI0100001223 | 20 | Per\nRM |
| 112 | 112 | Supply and fixed in repair Gunmetal , globe or gate valves, with iron wheel head, screwed both ends for 20 mm bore dia. iron pipe and fixed complete all as specified.\n | BI01010001010000000000000515BI0100001224 | 10 | Each |
| 113 | 113 | Supply and fixing in repairs 16 /18 mm thick plywood, 5 nos of ply, grade BWR, type BB,with commercial finish as in shelves, cupboard shutter etc and like fixed with screws to timber frame work in wall complete all as specified and as directed.\n | BI01010001010000000000000515BI0100001225 | 20 | Per\nSqm |
| 114 | 114 | Supply and fixing in repairs 12 mm thick plywood, 5 nos of ply, grade BWR, type BB,with commercial finish as in palmet , shelves , drawers etc etc and like fixed with screws to timber frame work in wall complete all as specified and as directed.\n | BI01010001010000000000000515BI0100001226 | 20 | Per\nSqm |
| 115 | 115 | Material and labour for 2nd class hard wood fillets sectional area exc 6 and n exc 13 sq cm plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads including two coat priming with creosote oil complete all as specified and as directed including taking down old one.\n | BI01010001010000000000000515BI0100001227 | 50 | Per\nRm |
| 116 | 116 | Supply and fixed in repairs in repair for fixing over crumple joints of 0.63mm thickness Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 with screws complete all as specified and as directed. | BI01010001010000000000000515BI0100001228 | 20 | Per\nSqm |
| 117 | 117 | Supply and fixing in repair 40mm bore high density polyethylene pipes (HDPE) of pressure rating 6kgf/Sqcm fixed complete to floors, wall, ceilings etc complete all as specified and as directed.\n | BI01010001010000000000000515BI0100001229 | 20 | Per\nRm |
| 118 | 118 | Material and labour plain cement concrete (1:2:4), type B-1, (using 20mm graded aggregate ) as in filling of PS door frame and fixing of hold fast, haunching/benching, drain channels etc including necessary form work complete all as directed. | BI01010001010000000000000515BI0100001230 | 2 | Per\nCum |
| 119 | 119 | Material and labour for chipping of unsound /week concrete materials from slabs , beams,columns ,lintel,chajja, fin , facia etc. including plaster by any means as directed by Engineer-in-Charge including tapering all edges, making square shoulders of cavities air or sand blasting etc and cleaning of exposed concrete surface of lightly picking materials by air blasting or sand blasting incl foreign matrials , loose concrete/aggregate etc and disposal of all debris outside MOD land complete all as specified.\n50mm average thickness for beams | BI01010001010000000000000515BI0100001231 | 122 | Per\nSqm |
| 120 | 120 | Material and labour for chipping of unsound /week concrete materials from slabs , beams,columns ,lintel,chajja, fin , facia etc.including plaster by any means as directed by Engineer-in-Charge including tapering all edges, making square shoulders of cavities air or sand blasting etc and cleaning of exposed concrete surface of lightly picking materials by air blasting or sand blasting incl foreign matrials , loose concrete/aggregate etc and disposal of all debris outside MOD land complete all as specified.\n60mm average for columns | BI01010001010000000000000515BI0100001232 | 162 | Per\nSqm |
| 121 | 121 | All as per item No.119 and 120 Deduct/add for every less/extra 10mm | BI01010001010000000000000515BI0100001233 | 36 | Per\nSqm |
| 122 | 122 | Material and labour for providing and placing in position free flow non shrink cementitious micro concrete of grade of M-50 to the effected bean , coloum , etc.The micro concrete shall have a minimum of 1 day compressive strength of 10 mpa and 28 days strength of 50 mpa, minimum tensile strength 5 N/mm2 @ 28 days. minimum flextural strength 5 N/mm2 @ 28 dayscomplete all as per manufacturers instruction and as directed. \nMake : FOSROC(Rendroc RG) or equivalent of SIKA / ELANTS BECK/ KUNAL CONCHEM\n50 mm average thickness of beam | BI01010001010000000000000515BI0100001234 | 122 | Per\nSqm |
| 123 | 123 | Material and labour for providing and placing in position free flow non shrink cementitious micro concrete of grade of M-50 to the effected bean , coloum , etc.The micro concrete shall have a minimum of 1 day compressive strength of 10 mpa and 28 days strength of 50 mpa, minimum tensile strength 5 N/mm2 @ 28 days. minimum flextural strength 5 N/mm2 @ 28 dayscomplete all as per manufacturers instruction and as directed. \nMake : FOSROC(Rendroc RG) or equivalent of SIKA / ELANTS BECK/ KUNAL CONCHEM\n60 mm average thickness of column | BI01010001010000000000000515BI0100001235 | 162 | Per\nSqm |
| 124 | 124 | All as per item No.122 and 123 Deduct/add for every less/extra 10mm | BI01010001010000000000000515BI0100001236 | 36 | Per\nSqm |
| 125 | 125 | Removing of concrete all around reinforcement including from behind the reinforcing bars to give an average 25mm (but not less than clear air gap)by manual methods (hammering the bar using wire brushing ,chiselling etc) and applying alkaline rust removing chemical followed by removing rust including from behind the reinforcing bars by emery paper and cleaning the area throughly by water and allow it to dry complete all as per manufacturers instruction and as directed.\nMake : FOSROC (Reebaklen-RR) or equivalent of SIKA / ELANTS BECK/ KUNAL CONCHEM\nUpto 12mm dia of bar | BI01010001010000000000000515BI0100001237 | 550 | Per\nRM |
| 126 | 126 | Removing of concrete all around reinforcement including from behind the reinforcing bars to give an average 25mm (but not less than clear air gap)by manual methods (hammering the bar using wire brushing ,chiselling etc) and applying alkaline rust removing chemical followed by removing rust including from behind the reinforcing bars by emery paper and cleaning the area throughly by water and allow it to dry complete all as per manufacturers instruction and as directed.\nMake : FOSROC (Reebaklen-RR) or equivalent of SIKA / ELANTS BECK/ KUNAL CONCHEM\nAbove 12mm dia of bar | BI01010001010000000000000515BI0100001238 | 366 | Per\nRM |
| 127 | 127 | Material and labour for providing single coat of epoxy bond adhensive on prepared non metallic surface (existing surface) and applying by brush complete all as per manufactures instruction/specification\nMake : FOSROC (Nitobond BP Std) or equivalent of SIKA / ELANTS BECK/ KUNAL CONCHEM | BI01010001010000000000000515BI0100001239 | 348 | Per\nSqm |
| 128 | 128 | Material and labour for applying Epoxy Zinc rich primer on the prepared steel surface surface by brush the primer shall have a minimium specific gravity 1.75 minimum weight film thickness/coat 40 microns and minimum adhesive bond strength with steel is 1.5N/mm2 complete all as per manufacturers instruction and as specified. \nMake : FOSROC (Nitozinc Primer) or equivalent of SIKA / ELANTS BECK/ KUNAL CONCHEM | BI01010001010000000000000515BI0100001240 | 916.5 | Per\nRM |
| 129 | 129 | Material and labour for introducing new reinforcement bars for structural connection in RCC beams, columns, lintel and slabs including power drilling holes of appropriate diameter in reinforced or plain cement concrete to a minimum depth of 150mm and upto 200mm including power drilling ,fixing the reinforcement in position using epoxy,cleaning of loose dust by blowing air, sealing with epoxy cartridge etc complete all as per manufacturers instruction and as specified.\nMake : FOSROC (Lockfix E 75) or equivalent of SIKA / ELANTS BECK/ KUNAL CONCHEM\n Upto 12mm dia of bar | BI01010001010000000000000515BI0100001241 | 550 | Per\nRM |
| 130 | 130 | Material and labour for introducing new reinforcement bars for structural connection in RCC beams, columns, lintel and slabs including power drilling holes of appropriate diameter in reinforced or plain cement concrete to a minimum depth of 150mm and upto 200mm including power drilling ,fixing the reinforcement in position using epoxy,cleaning of loose dust by blowing air, sealing with epoxy cartridge etc complete all as per manufacturers instruction and as specified.\nMake : FOSROC (Lockfix E 75) or equivalent of SIKA / ELANTS BECK/ KUNAL CONCHEM\n Above 12mm dia of bar | BI01010001010000000000000515BI0100001242 | 366 | Per\nRM |
| 131 | 131 | Material and labour for providing and inserting mild steel shear key bars/levelling gauges of required length and diameter in reinforced/plain concrete as site requirement and direction of engr-in-charge including power drilling holes of appropriate diameters to a minimum depth equal to 12 times the diameters of shear key bar/levelling gauge, cleaning the drilled holes of loose dust by blowing , insertion of epoxy from cartridge, placing the share key bar in position and allowing it to stay undisturbed for 24 hours. Rate shall be include cost of labour, all masterials, T&P for power drilling in concrete , epoxy cartridge, plastic nozzle etc, complete incl cleaning the drilled holes of loose dust by blowing air complete all as per manufacturers instruction and as specified.\nMake : FOSROC (Lockfix E 75) or equivalent of SIKA / ELANTS BECK/ KUNAL CONCHEM\n12mm dia, 300mm long @ MS shear key of Bar\nNOTE :- The projection length of shear key shall be more than 10 times its diameter plus half of the thickness of cover concrete plus bend length. | BI01010001010000000000000515BI0100001243 | 700 | Each |
| 132 | 132 | Supply, mixing and application by mixing of two component structural grade polymer modified reinstatement mortar, where local spalling has taken place or shuttering is not possible . The morter can be applying in layers not exceeding 6mm thick in each layer in and upto any thickness in smaller vertical pockets and upto any thickness in horizontal applications. The mortar should have a minimium compressive strength 12N/mm2 in 1 day and 45N/mm2 in 28 days. Minimum flexural strength should be 8 N/mm2 in 28 days. A modified styrene butadience emulsion for use as a bonding aid and gauging liquid for cementious system to be mixed with cement slurry before the application of mortar to be used @ 6 ltr/bag of cement. The bonding agent should have minimium compressive strength 24N/mm2. Minimum tensile strength 3.5N/mm2, minimium flexural strength 6.5N/mm2 complete all as per manufcturers instruction ans as specified.\n Upto 25mm average thickness\nMake : FOSROC (Rendroc SP-40) or equivalent of SIKA / ELANTS BECK/ KUNAL CONCHEM\nNOTE:- Cement and sand morter in proportion of 1:2 graded coarse sand with polymer admixed in proportions as per manufacturers instruction and as approved by Engr-in-charge)\n\n | BI01010001010000000000000515BI0100001244 | 152.5 | Per\nSqm |
| 133 | 133 | Material and labour for applying curing compound of approved brand over concrete surfaces complete as per manufactures instruction and as specified.\nMake : FOSROC (Concure WB) or equivalent of SIKA / ELANTS BECK/ KUNAL CONCHEM | BI01010001010000000000000515BI0100001245 | 458 | Per\nSqm |
| 134 | 134 | Supply and fix 100 mm dia cast iron soil,waste and vent pipes in any length with or without ears with cement joints fixed to walls complete all as specified and as directed. | BI01010001010000000000000515BI0100001246 | 25 | Per\nRM |
| 135 | 135 | Supply and fix 100mm bore CI bends(any radius) with ducks foot or heel rest complete all as specified and directed. | BI01010001010000000000000515BI0100001247 | 5 | Each |
| 136 | 136 | Supply and fix 100mm bore CI branch piece, single (equal or unequal), ordinary or inverted(spigot or socket type) or with parallel branches complete all as directed. | BI01010001010000000000000515BI0100001248 | 5 | Each |
| 137 | 137 | Material and labour for uprooting of tree from walls of bldgs up to extranded root and spraying of acid of required quantity complete from any location of Bldg up to 4 storied and making good disturbed surfaces with cement mortar (1:4) or cement concrete type C1(1:3:6) using 20mm graded aggregate including necessary scafolding complete for tree of girth up to 5 to 10 cm complete all as specified. | BI01010001010000000000000515BI0100001249 | 20 | Per\nSqm |
| 138 | 138 | Supply and fixed in repairs cast iron nahani/floor trap, plain with PVC grating including jointing with solvent cement cement concrete/cement mortar 1:3, 100 mm dia. outlet complete all as specified.\n | BI01010001010000000000000515BI0100001250 | 10 | Each |
| 139 | 139 | Material and labour for repair to bath room out let pipe, rain water pipe mouth with the help of chemical sealing component including PCC 1:2:4(20mm graded aggregate) as per manufacturer instructions complete all as specified and directed by Engr-in-Charge. \nMake : FOSROC (Conbextar GP2 ) or equivalent of SIKA / ELANTS BECK/ KUNAL CONCHEM | BI01010001010000000000000515BI0100001251 | 10 | Each\nJob |
| 140 | 140 | Material and labour for water proofing treatment to sunken portion of toilet including preparing the wall and floor surfaces of sunken portion of toilet and applying the elastomeric polymer modified cementitious water proofing coating as per manufacturer instructions complete all as specified and directed.\nMake :- FOSROC ( BRUSH BOND RFX & NITO BOND BBX ) or equivalent of SIKA / ELANTS BECK/ KUNAL CONCHEM | BI01010001010000000000000515BI0100001252 | 20 | Per\nSqm |
| 141 | 141 | Material and labour for 10mm thick rendering in cement mortar (1:3) on fair faces of brick work or concrete surfaces as in sunken portion etc finished even and smooth (without using extra cement) complete all as specified.\n | BI01010001010000000000000515BI0100001253 | 20 | Per\nSqm |
| 142 | 142 | Material and labour for grouting hole/crack line with injecting plasticised expanding grout admixture complies to BS : 8110 Part I-1985 through the prefixed nozzles under pressure using grout pump to fill all possible pores and gaps left with in concrete mass incl rapid setting cement base water pluggung mortar with 24 hrs setting time given at any height and position of Bldg etc as per manufacturer instructions complete all as specified .\nMake :- FOSROC ( Cebex 100 & Rendroc Plug )or equivalent of SIKA / ELANTS BECK/ KUNAL CONCHEM | BI01010001010000000000000515BI0100001254 | 40 | Each\nNozzle |
| 143 | 143 | Dismantling posts or struts (wood, steel or R.C.C.) any section embedded in natural ground , including taking out embedded portion and making good disturbed ground complete all as specified. ( Note :- the vertical height above GL shall be measured for the purpose of payment towards work done)\n | BI01010001010000000000000515BI0100001255 | 50 | Per\nRm |
| 144 | 144 | Dismantling posts or struts (wood, steel or R.C.C.) any section embedded in concrete, brick work , including taking out embedded portion and making good disturbed ground complete all as specified. ( Note :- the vertical height above GL shall be measured for the purpose of payment towards work done)\n | BI01010001010000000000000515BI0100001256 | 27 | Per\nRm |
| 145 | 145 | Dismantling of chain link wire mesh of any type including removing of rusted unserviceable wire mesh, flat iton, round bar MS, nuts & bolts from work site and keep serviceable wire mesh, flat iton, round bar MS, nuts & bolts for reused in safe custody all as directed. | BI01010001010000000000000515BI0100001257 | 252 | Per\nSqm |
| 146 | 146 | Excavating in post holes in soft/ loose soil ( or similar holes) each n exc 0.5 cu.m. getting out, returning,filling in and ramming earth or broken rubble mixed with earth around , in layer not exceeding 25 cm, watering and removing surplus soil to a distance n.exc 50 M complete all as specified.\n | BI01010001010000000000000515BI0100001258 | 40 | Each |
| 147 | 147 | Material and labour fpr plain cement concrete 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in foundations / mass concrete for embedding angle iron fencing post and struts complete all as specified.\n | BI01010001010000000000000515BI0100001259 | 3.65 | Per\nCum |
| 148 | 148 | Supply and fix MS Steel works as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc., and similar work confirming to Fe-290 Gde E-165 complete all as specified and as directed. | BI01010001010000000000000515BI0100001260 | 550 | Per\nKilogram |
| 149 | 149 | Material and labour for providing pre cast reinforced cement concrete (1: 1.5:3), type A 1 (using 20mm graded crushed stone aggregate) as in precast posts, fencing posts, straining or terminal posts, struts etc for fencing,average sectional area exc 100 sq cm and n.exc 250 sq cm with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed complete all as specified and directed. | BI01010001010000000000000515BI0100001261 | 3 | Per\nCum |
| 150 | 150 | Material and labour for Mild steel bars 8mm dia, cut to length, bent to shape required, including cranking , bending , hooping ends as horizontal runner(tie) to fix chain link fencing, etc complete all as specified & as directed. | BI01010001010000000000000515BI0100001262 | 5 | Per\nKilogram |
| 151 | 151 | Supply only 3.15 mm dia galvanised steel wire, (Hot dipped galvanised), any size or type of weight not less than 3 kg / Sqm complete all as specified.\nNote :- A BOO will be conveyed by GE to acertain the actual weight of chain link fencing before making any payment. | BI01010001010000000000000515BI0100001263 | 756 | Per\nKilogram |
| 152 | 152 | Fixing only chain link fencing to post old and new including line wires, any mesh , size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire all as directed.\nNote: MS flat iron and nuts and bolt shall be measured and paid uner respective items and old material shall be obtained from dismantling item here-in-before. | BI01010001010000000000000515BI0100001264 | 252 | Per\nSqm |
| 153 | 153 | Supply and fix mild steel flat iron fillets for securing chainlink/wire mesh including all necessary drilling, bolting or riveting etc, conforming to Fe-290, Gde E-165 complete all as specified. | BI01010001010000000000000515BI0100001265 | 50 | Per\nKilogram |
| 154 | 154 | Material and labour for Mild screw bolts ( Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends , each screwed end to be fitted with washers and one hexagonal or square nut , exc 10 but n exc 15cm long and 11 to 15 mm dia. of shank complete all as specified.\n | BI01010001010000000000000515BI0100001266 | 10 | Per\nKilogram |
| 155 | 155 | Material and labour for preparation of new steel surfaces of any description not otherwise described not exc.10 cm width or girth and applying two coats of synthetic enamelled paint (1st quality) over one coat of red oxide Zinc chrome primer complete all as specified.\n | BI01010001010000000000000515BI0100001267 | 15 | Per\n10 \nRm |
| 156 | 156 | Restraining and re securing including making good staples of old serviceable barbed wire in position complete all as specified. | BI01010001010000000000000515BI0100001268 | 5 | Per\n100\nRm |
| 157 | 157 | Repairs to existing RCC fencing post by rendering in cement mortar (1:3) as required to make good the edging/top portion of post on ground complete all as specified. | BI01010001010000000000000515BI0100001269 | 20 | Each |
| 158 | 158 | Dismantling of mild steel Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings, including removing of rusted unserviceable wire from work site and keep serviceable wire for reused in safe custody all as directed. | BI01010001010000000000000515BI0100001270 | 4.8 | Per\n100\n RM |
| 159 | 159 | Material and labour for Mild steel Galvanised, (hot dipped galvanised) 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts , including,securing or tying at crossings with and Provision of galvanised mild steel wire , staples or steel pins etc. as directed ( each line wire to be measured) all as directed. | BI01010001010000000000000515BI0100001271 | 4.8 | Per\n100\n RM |
| 160 | 160 | Cutting holes in brick wallls built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting hold fast etc and making good dismanteled portion with PCC 1:2:4 type B-I (using 20 mm graded stone aggregates), depth of embededed portion Exc. Half brick but not exc. one brick complete all as specified . | BI01010001010000000000000515BI0100001272 | 12 | Each |
| 161 | 161 | Supply and fix in repair collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified. | BI01010001010000000000000515BI0100001273 | 10 | Per\nSqm |
| 162 | 162 | Material and labour for preparation of old decorated surfaces of wall by brooming down or steel wire brushing scrapping down to remove smooke soot moulds moss and efflorescene salts and treating oil and greasy spots etc and applying a coat of colour wash complete all as specified. | BI01010001010000000000000515BI0100001274 | 750 | Per\nSqm |
| 163 | 163 | Material and labour for preparing old decorated plastered or unplastered surfaces of walls including cornices, pilasters and other wall features etc by brooming down or steel wire brushing scrapping down to remove smooke soot moulds moss and efflorescene salts and treating oil and greasy spots etc and applying one coat of white wash on the same all as complete all as specified . | BI01010001010000000000000515BI0100001275 | 750 | Per\nSqm |
| 164 | 164 | All as per item No 163 here-in-before but on ceiling surfaces complete all as specified. | BI01010001010000000000000515BI0100001276 | 200 | Per\nSqm |
| 165 | 165 | Material and labour for preparation of old decorated distempered surfaces of walls by washing, rubbing down and stopping of distempered and painted surfaces and distempering walls by applying one coat of acrylic based distemper emulsion of any tint/shade and applying wall care white putty / white cement for filling up the cracks / holes on wall including rubbing and sand papering surfaces to achieve smooth surfaces including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .\n | BI01010001010000000000000515BI0100001277 | 200 | Per\nSqm |
| 166 | 166 | Material and labour for preparation of old decorated distempered surfaces of ceiling by washing, rubbing down and stopping of distempered and painted surfaces and distempering ceiling by applying one coat of acrylic based distemper emulsion of any tint/shade and applying wall care white putty / white cement for filling up the cracks / holes on wall including rubbing and sand papering surfaces to achieve smooth surfaces including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .\n | BI01010001010000000000000515BI0100001278 | 50 | Per\nSqm |
| 167 | 167 | Material and labour for preparation of old decorated plastered surfaces of walls by applying wall care white putty / white cement for filling up the cracks / holes on wall including rubbing and sand papering surfaces to achieve smooth surfaces and applying a coat of cement base paint including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .\n | BI01010001010000000000000515BI0100001279 | 3000 | Per\nSqm |
| 168 | 168 | Material and labour for one coat of exterior emulsion paint 100% acrylic, white or tinted on old painted surfaces of wall/chajja//facias including prepration of old surfaces and washing floors, cleaning glass, joinery,electrical fittings, wiring etc., of drops and splashes complete all as specified .\n\n | BI01010001010000000000000515BI0100001280 | 250 | Per\nSqm |
| 169 | 169 | Material and labour for preparation of old painted wooden /wood based materials surfaces of any description, not otherwise described, over 10 cm width or girth and painting one coat with synthetic enamel paint (1st quality) including cleaning, stopping and rubbing down and removing all dropings etc. all as directed. | BI01010001010000000000000515BI0100001281 | 100 | Per\nSqm |
| 170 | 170 | Material and labour for preparation of old painted steel and iron surfaces of any description , not otherwise described,over 10 cm width or girth and painting one coat with synthetic enamel paint including cleaning, stopping and rubbing down and removing all drops etc. complete all as speciified.\n\n | BI01010001010000000000000515BI0100001282 | 100 | Per\nSqm |
| 171 | 171 | INTERNAL ELECTRIFICATION\nTaking down carefully aluminium conductor point wiring (light,fan,socket or power) complete including fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing (except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing complete all as specified. | BI01010001010000000000000515BI0100001283 | 226 | Per\n Point |
| 172 | 172 | Material & Labour for consealed type point wiring with 1.50 Sqmm (nominal cross sectional area) PVC insulated (FRLS) unsheathed single core multi stranded copper conductor cable of working voltage 1100 volts grade conforming to IS-694 Pt I & II of 2000 drawn through and including PVC conduit of adequate size having a wall thickness not less than 1.5 mm with all accessories (including cutting chases & making good the disturbed surface to its original specification), including provision of 1.5 Sqmm (nominal cross sectional area) PVC insulated (FRLS) unsheathed single core multi stranded copper conductor cable as earth continuity conductor, connected to main switch / DBs or common earth dolly for one light / fan point / exhaust point controlled by one 5 Amps one way switch complete all as specified and as directed.\nNote: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.\n | BI01010001010000000000000515BI0100001284 | 160 | Per \nPoint |
| 173 | 173 | All as per item No.172 here-in-before but for one socket out let 5/6 amps point on the independent board | BI01010001010000000000000515BI0100001285 | 35 | Per \nPoint |
| 174 | 174 | All as per item No.172 above but One socket out let 5/6 amps point on the same board complete all as specified. | BI01010001010000000000000515BI0100001286 | 20 | Per\n Point |
| 175 | 175 | All as per item No.172 above but One light point controlled by two way switch 5/6 amps. | BI01010001010000000000000515BI0100001287 | 5 | Per\n Point |
| 176 | 176 | All as per item No.172 above but One bell/buzzer point controlled by one bell push button | BI01010001010000000000000515BI0100001288 | 6 | Per\n Point |
| 177 | 177 | Material and labour wiring for 5/6 pin 6/16 Amp switch socket combination on independent boards controlled by one, one way switch using 2.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 2.5 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FR earth wire and connecting to earth dolly and brass screws, washers etc. including cutting chases pinning in for concealed conduit wiring and making good of disturbed surface n exc 15 cm girth complete all as specified. | BI01010001010000000000000515BI0100001289 | 20 | Per \nPoint |
| 178 | 178 | Supply and fixed switch piano flush type, single pole , 6 Amps, one way complete all as specified. | BI01010001010000000000000515BI0100001290 | 265 | Each |
| 179 | 179 | Supply and fixed switch piano flush type, single pole , 6 Amps, two ways complete all as specified. | BI01010001010000000000000515BI0100001291 | 10 | Each |
| 180 | 180 | Supply and fixed socket 2 in 1, 5 Pin, 5/6 amps, any type complete all as specified and as directed. | BI01010001010000000000000515BI0100001292 | 55 | Each |
| 181 | 181 | Supply and fixed switch socket combination 2 in 1 multipurpose 5 pin , (6 Amps ) flush type controlled by one switch complete all as specified. | BI01010001010000000000000515BI0100001293 | 20 | Each |
| 182 | 182 | Supply and fixed switch piano flush type, single pole , 15/16 Amps, one way complete all as specified. | BI01010001010000000000000515BI0100001294 | 20 | Each |
| 183 | 183 | Supply and fixed switch in repairs socket combination 2 and 3 Pin, 5/6 amps, multipurpose of any type flush type controlled by one switch complete all as specified. | BI01010001010000000000000515BI0100001295 | 100 | Each |
| 184 | 184 | Supply and fixed in repairs switch socket combination 2 in 1, 6 pin 5/6 amps and 15/16 amps multipurpose, of any type complete all as specified. | BI01010001010000000000000515BI0100001296 | 60 | Each |
| 185 | 185 | Supply & fixed Bell push , flush type , 5/6 amp complete all as specified. | BI01010001010000000000000515BI0100001297 | 6 | Each |
| 186 | 186 | Supply & fixed Buzzer, Ding dong, AC 230 Volts, single pole 230 volts all as specified and directed. | BI01010001010000000000000515BI0100001298 | 6 | Each |
| 187 | 187 | Supply & fixed ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified. | BI01010001010000000000000515BI0100001299 | 145 | Each |
| 188 | 188 | Supply & fixed lamp holder, PVC/polycarbonate type with back plate straight or anfular suitable for batten fittings complete all as specified. | BI01010001010000000000000515BI0100001300 | 15 | Each |
| 189 | 189 | Supply & fixed in repairs LED white glass Lamp 1x14 Watts, 230V Base-22 complete all as directed. | BI01010001010000000000000515BI0100001301 | 15 | Each |
| 190 | 190 | Supply & fixed stepped type electronic fan regulator flush type 240 Volts ISI marked complete all as specified .\n | BI01010001010000000000000515BI0100001302 | 30 | Each |
| 191 | 191 | Supply & fix in repairs modular switch 1 way 6/10A,1 module, 230 Volts, including necessary connection complete all as specified. | BI01010001010000000000000515BI0100001303 | 110 | Each |
| 192 | 192 | Supply & fix in repairs modular switch 1 way 16/20A,1 module, 230 Volts, including necessary connection complete all as specified. | BI01010001010000000000000515BI0100001304 | 10 | Each |
| 193 | 193 | Supply & fix in repairs modular socket, 6A-2/3 pin combined 2 module, 230 Volts AC including necessary connection complete all as specified. | BI01010001010000000000000515BI0100001305 | 10 | Each |
| 194 | 194 | Supply & fix modular socket, 6A/16A-2/3 pin combined 2 module, 230 Volts AC including necessary connection complete all as specified. | BI01010001010000000000000515BI0100001306 | 10 | Each |
| 195 | 195 | Supply & fix in repairs modular fan electronic regulator 230 volts AC, 50 Hz ,1 module, 230 Volts, including necessary connection complete all as specified. | BI01010001010000000000000515BI0100001307 | 5 | Each |
| 196 | 196 | Supply and fixing of LED light fittings 1 x 18/20 watts 230 Volt white powder coated slim box type batten made of formed CRCA with snap on installer LED lighting fixture with and including 1x18/20 watt T8 double side connection retrofit LED tube with G13 lamp holders, connector block, complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable up to cealing rose complete all as specified and directed. \nMake : Havells Cat No: REGALBATTEN8 UPTO 1 x 22W SSBSWH & Cat No: PHOTONULTRA 1213T8 SSTL20W LED 865 SPC (Tube) or of equivalent make as specified in list of makes | BI01010001010000000000000515BI0100001308 | 120 | Each |
| 197 | 197 | S&F in replacement of LED tube light 4 feet 1 x 18/20 watts energy efficient T8, 230 Volt warm light complete all as specified.\nNote : PHOTONULTRA1213T8SSTL20W LED 865SPC or equivalent make as specified in list of makes. | BI01010001010000000000000515BI0100001309 | 52 | Each |
| 198 | 198 | Supply and fixing in repairs LED tube light fittings 1 x 9/10 watts energy efficient, 230 V incl 1x9/10 watt LED tube, surface / wall mounted LED batten with aluminium housing and integrated driver including holders, connector block etc. complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable all as specified and directed. \nMake : Havells Cat No LUMILINEPLUSBS10WLED865SPCSS or of equivalent make as specified in list of makes\n | BI01010001010000000000000515BI0100001310 | 50 | Each |
| 199 | 199 | Supply and fixing in repairs bi-pin holder suitable for 20/40 Watt T/L fitting complete all as specified and directed. Make : Surya/CG/Bajaj. | BI01010001010000000000000515BI0100001311 | 10 | Each |
| 200 | 200 | Supply and fixing in repairs hylam sheet 3 mm thick white in colour of size 130 mm x 180 mm complete all as specified and directed. | BI01010001010000000000000515BI0100001312 | 20 | Each |
| 201 | 201 | Supply and fixing in repairs hylam sheet 3 mm thick white in colour of size 120 mm x 170 mm complete all as specified and directed. | BI01010001010000000000000515BI0100001313 | 20 | Each |
| 202 | 202 | Supply and fixing in repairs hylam sheet 3 mm thick white in colour of size 230 mm x 280 mm complete all as specified and directed. | BI01010001010000000000000515BI0100001314 | 20 | Each |
| 203 | 203 | Supply and fixing in repairs hylam sheet 3 mm thick white in colour round type of size 80 mm dia i complete all as specified and directed. | BI01010001010000000000000515BI0100001315 | 10 | Each |
| 204 | 204 | Material and labour for ceiling LED fitting 34 Watts of size 2x2 feet aesthetically designed flat panel surface mounted having soft light and glare free symmetrical illumination with connector block, complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable up to ceiling rose including taking down old unserviceable one complete all as specified\nand as directed.\nMake : Havells, Cat No: PLUTOSURFACE2X2PLS34WLED840S or of equivalent make as specified in list of makes. | BI01010001010000000000000515BI0100001316 | 10 | Each |
| 205 | 205 | Supply and fixing in repairs of ceiling LED fitting 15 Watts of size 1x1 feet aesthetically designed flat panel surface mounted having soft light and glare free symmetrical illumination with connector block, complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable up to ceiling rose complete all as specified and as directed.\nMake : Havells, Cat No: PLUTOSURFACE1X1PLS15WLED840S or of equivalent make as specified in list of makes. | BI01010001010000000000000515BI0100001317 | 10 | Each |
| 206 | 206 | Material and labour for replacement of LED flood light fitting 100 Watts Energy saving environment friendly , long life,exclusive innovative die cast aluminium IP66 flood light ,suitable for high lighting architectural facade and general purpose lighting with connector block, complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable up to cealing rose complete all as specified and directed. \nMake : Havells Cat No JETAIRISFLS100WLED757SYMLTG or equivalent as specified in list of makes. | BI01010001010000000000000515BI0100001318 | 4 | Each |
| 207 | 207 | Supply and fixing in repairs street light bracket made out of GI pipe light grade 32 mm dia 1.2 mtr length bent to shape and reduced to required size at top upto 1.2 mtr length by cutting, welding and well finishing including MS clamp of flat iron of size 25 x 5 mm suitable length 2 Nos complete with drilling, hole, fixing with nuts bolts and washers including painted with two coats aluminium paint over a coat of red oxide primer complete all as specified and directed.\n | BI01010001010000000000000515BI0100001319 | 20 | Each |
| 208 | 208 | Supply and fixing in repairs of Post top laterns made up of high grade unbreakable polycarbonate materials suitable for mounting on gate / pole complete with and including all accessories internally pre-wired with and including LED lamp 12 Watt complete all as specified and as directed.\nMake Surya Cat No SLE PT 12W-GP250 or of equivalent make as specified in list of makes.\n | BI01010001010000000000000515BI0100001320 | 4 | Each |
| 209 | 209 | Materials and labour for Sub main wiring with 2 runs of 6.00 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core flame retardant cable (FRLS) of working voltage 1100 volts grade with stranded copper conductor including one run of 6.00 Sqmm (nominal cross sectional area) PVC insulated unsheathed flame retardant cable (FRLS) with stranded copper conductor as continuous earth wire connected to main switches DBs or in common earth dolly, drawn through and including PVC rigid non- metallic PVC conduit / casing and capping ISI marked , medium garde of adequate size with all conduit / casing and capping accessories ISI marked as required complete all as specified and as directed including taking down old unserviceable / burnt / damaged one.\n[NOTE : Two run of sub main wiring cable along with one run of earth wire and one run of PVC Conduit / casing and capping shall be measured as one length] | BI01010001010000000000000515BI0100001321 | 80 | Per\nRM |
| 210 | 210 | Materials and labour for Sub main wiring with 2 runs of 4.00 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core flame retardant cable (FRLS) of working voltage 1100 volts grade with stranded copper conductor including one run of 4.00 Sqmm (nominal cross sectional area) PVC insulated unsheathed flame retardant cable (FRLS) with stranded copper conductor as continuous earth wire connected to main switches DBs or in common earth dolly, drawn through and including PVC rigid non- metallic PVC conduit / casing and capping ISI marked , medium garde of adequate size with all conduit / casing and capping accessories ISI marked as required complete all as specified and as directed including taking down old unserviceable / burnt / damaged one.\n[NOTE : Two run of sub main wiring cable along with one run of earth wire and one run of PVC Conduit / casing and capping shall be measured as one length] | BI01010001010000000000000515BI0100001322 | 80 | Per\nRM |
| 211 | 211 | Supply & fix sheet metal enclosure for 8 way Distribution Boards (DB’s), double door , single pole and neutral with 200 amps rated bus bar, including bus bar neutral link, earth bar and din rail, IP-43, IK-09 protection including gasket and door earthing suitable for fixing MCBs/isolators fixed on wall surface and making good the disturbed surfaces of wall and connecting up including taking down old unserviceable one complete all as specified and as directed. \n | BI01010001010000000000000515BI0100001323 | 6 | Each |
| 212 | 212 | Supply and fixed in repairs MCB SPN 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. \n(Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating). | BI01010001010000000000000515BI0100001324 | 6 | Each |
| 213 | 213 | Supply and fixed in repairs MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Voltsand to be housed in DBs including necessry connection complete all as specified and directed. \n (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating). | BI01010001010000000000000515BI0100001325 | 36 | Each |
| 214 | 214 | Supply and fixed in repairs MCB SPN 40 to 63 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. \n (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating). | BI01010001010000000000000515BI0100001326 | 6 | Each |
| 215 | 215 | Supply and fixed in repairs for Single pole and neautral enclosure with a two pin and earth plug and socket complete with one single pole MCB, 20 Amps, 240 Volts, including necessry connection complete all as specified including taking down old one | BI01010001010000000000000515BI0100001327 | 8 | Each |
AI Tender Summary
Tender Timeline
Aug 30, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 20, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender