Upkeeping Of Central Explosive Magazine Complex Near Jhingurdah For 2 Years At Jayant Project .
Tender Value
18.54 Lakhs
Estimated cost
Bid Submission
16 Sep 2019
0 days left
EMD
23200
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jayant → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Upkeeping Of Central Explosive Magazine Complex Near Jhingurdah For 2 Years At Jayant Project .
BOQ
| Name of Work: | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 0 | BOQ | |||
| 2 | 1 | Brooming and cleaning of roads in colony and within the premises of service building and other places as required with all tools & tackles and stacking the garbage at specified place as per instruction of EIC. | 118664 | sqm | |
| 3 | 2 | Cleaning of heneral/ common toilet including cleaning of WC pan (Indian/ European type) wash basin, urinals by hand dusting and cleaning with soap solution, acid deodrants, phenyl, etc. to make the toilet clean and hygienic and providing naphthalene balls in urinals complete with all tools, tackles & consumables as per instruction of EIC. | 3650 | sqm | |
| 4 | 3 | Cleaning of roof top water tank, including draining out water, cleaning & disinfecting the tank, by bleaching powder etc and washing tanks with fresh water, writing cleaning date with paint on outer face of tank all complete with tools and consumables as per instruction of EIC. | 10 | each | |
| 5 | 4 | Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. | 180000 | sqm | |
| 6 | 5 | Finishing walls with Acrylic Smooth exterior paint of required shade: | |||
| 7 | 5.1 | Old work (One or more coat applied @ 0.90 ltr/10 sqm). | 9177 | sqm | |
| 8 | 6 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : | |||
| 9 | 6.1 | Old work (one or more coats) | 2012 | sqm | |
| 10 | 7 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : | |||
| 11 | 7.1 | One or more coats on old work | 2300 | sqm | |
| 12 | 8 | Supplying and stacking at site. | |||
| 13 | 8.1 | Moorum | 65 | cum | |
| 14 | 9 | Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used. | |||
| 15 | 9.1 | With G.I. barbed wire | 2400 | metre | |
| 16 | 10 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) | 300 | metre | |
| 17 | 11 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 1000 | kg | |
| 18 | 12 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer- in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 174 | sqm | |
| 19 | 13 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). | |||
| 20 | 13.1 | Sal wood | 0.18 | cum | |
| 21 | 14 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Second class teak wood | |||
| 22 | 14.1 | 30 mm thick shutters | 4.5 | sqm | |
| 23 | 15 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : | |||
| 24 | 15.1 | Second class teak wood | 4.5 | sqm | |
| 25 | 16 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : | |||
| 26 | 16.1 | 150x10 mm | 24 | each | |
| 27 | 17 | Providing and fixing bright finished brass handles with screws etc. complete: | |||
| 28 | 17.1 | 100 mm | 24 | each | |
| 29 | 18 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : | |||
| 30 | 18.1 | 250x16 mm | 10 | each | |
| 31 | 19 | Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete. | |||
| 32 | 19.1 | 100x58x1.90 mm | 40 | each | |
| 33 | 20 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. | |||
| 34 | 20.1 | 30 mm thick plain PVC door shutters | 12.8 | sqm | |
| 35 | 21 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. | |||
| 36 | 21.1 | 10 litre capacity - White | 8 | each | |
| 37 | 22 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: | |||
| 38 | 22.1 | White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap | 4 | each | |
| 39 | 23 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. EXTERNAL WORK | |||
| 40 | 23.1 | 15 mm nominal outer dia Pipes | 15 | metre | |
| 41 | 23.2 | 20 mm nominal outer dia Pipes | 15 | metre | |
| 42 | 24 | Providing and fixing brass stop cock of approved quality : | |||
| 43 | 24.1 | 15 mm nominal bore | 8 | each | |
| 44 | 25 | Providing and fixing brass bib cock of approved quality : | |||
| 45 | 25.1 | 15 mm nominal bore | 8 | each | |
| 46 | 26 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : | |||
| 47 | 26.1 | Orissa pattern W.C. pan of size 580x440 mm | 4 | each | |
| 48 | 27 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: | |||
| 49 | 27.1 | Float glass panes of thickness 5.5 mm | 10 | sqm | |
| 50 | 28 | Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. | |||
| 51 | 28.1 | All kinds of soil | 2000 | sqm | |
| 52 | 29 | 12 mm cement plaster of mix : | |||
| 53 | 29.1 | 1:6 (1 cement: 6 fine sand) | 150 | sqm | |
| 54 | 30 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : | |||
| 55 | 30.1 | 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size). | 10 | cum | |
| 56 | 31 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | |||
| 57 | 31.1 | Circular tank | 2000 | per litre | |
| 58 | 32 | Brickwork with non-modular FALG bricks confirming to IS:12984, Class Designation 7.5 average compressive strength etc. complete in all respect in foundation and plinth. Cement Mortar 1:6 (1 cement: 6 coarse sand) | 10 | cum | |
| 59 | 33 | Brickwork with non-modular FALG bricks confirming to IS:12984, Class Designation 7.5 average compressive strength etc. complete in all respect in superstructure above plinth level upto floor V. Cement Mortar 1:6 (1 cement: 6 coarse sand) | 10 | cum | |
| 60 | 34 | Spreading and levelling to gradient kankar/ shingle/ gravel/ moorum/ red bazari, etc. | 65 | cum | |
| 61 | 35 | Total impact of GST for the purpose of CTC | 1 | Nos |
AI Tender Summary
Tender Timeline
Aug 30, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 17, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender