Construction Of 3 Tpd Capacity Micro Composting Centre At Tarbha
Tender Value
40.25 Lakhs
Estimated cost
Bid Submission
20 Sep 2019
0 days left
EMD
41000
Bank guarantee accepted
Document Fee
10500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
TARBHA → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of 3 Tpd Capacity Micro Composting Centre At Tarbha
BOQ
| Name of Work: Construction of 3 TPD Capacity Micro Composting Centre at Tarbha | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work excavation in foundation in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3mtr in depth as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001118 | 59.35 | Cum |
| 2 | 2 | Conveying the excavated earth by mechanical means within 5 km lead with loading and unloading etc. complete. | BI01010001010000000000000515BI0100001119 | 59.35 | Cum |
| 3 | 3 | Supplying and filling F&P with river sand with well watering and ramming etc. complete. | 258.5 | Cum | |
| 4 | 4 | Supplying all materials, labour, T&P and providing Cement Concrete (1:4:8) using 4 cm size CBHG metal etc. complete. | 51.45 | Cum | |
| 5 | 5 | Supplying all materials, labour, T&P and providing Flyash brick masonary in cement mortar (1:4) in F&P etc. complete. | 67.47 | Cum | |
| 6 | 6 | Supplying all materials, labour, T&P and providing Cement Concrete (1:2:4) using 12mm to 20mm size CBHG chips etc. complete. | BI01010001010000000000000515BI0100001127 | 39.8 | Cum |
| 7 | 7 | Supplying all materials, labour, T&P and providing Reinforced Cement Concrete/ CC (1:1.5:3) using 12mm to 20mm size CBHG chips etc. complete. | 8.73 | Cum | |
| 8 | 8 | Supplying all materials, labour, T&P and providing Flyash brick masonary in cement mortar (1:6) inSuperstructure etc. complete. | 33.51 | Cum | |
| 9 | 9 | Providing 12 mm thick CP(1:6) to out side smooth surface etc. complete. | 233.69 | Sqm | |
| 10 | 10 | Providing 16 mm thick CP(1:6) to in side smooth surface etc. complete. | 397 | Sqm | |
| 11 | 11 | Providing 12 mm thick CP(1:4) to out side smooth surface etc. complete. | 128.8 | Sqm | |
| 12 | 12 | Two coat cement wash to inside and out side smooth surface with all cost of labour, T&P , materials etc. complete. | 759.49 | Sqm | |
| 13 | 13 | Supplying all materials, labour, T&P for applying two coats of weather coat seal coat with primer over the out side and inside wall with well, watering and curing etc. complete. | 759.49 | Sqm | |
| 14 | 14 | Supplying all materials, labour, T&P for providing Mild Steel tubular posts and Trusses and base plates made out of ERW tubes, Grade YST 210 conforming to ISS no.1161/79 (3rd Revision) duly painted with red oxide primer etc. complete. | 76.5 | Qntl | |
| 15 | 15 | Supplying all materials, labour, T&P for providing Mild Steel tubular or rectangular purlins with runners bracing for tubular trusses made out of ERW tubes of O.D.76.1 mm and 3.15 mm thick Grade YST 210 conforming to ISS no.1161/79 (3rd Revision) duly painted with red oxide primer etc. complete. | 52.91 | Qntl | |
| 16 | 16 | Supplying fitting & fixing of Precoated Galvanized iron Profile sheet semi gloss of 1000mm width & total coated thickness 0.50mm in roof drilling hole in wind ties including fixing of ridges valleys, wind ties etc. complete including cost of sheet & all fitting (per 1 Sq. Mtr.) | 550.87 | Sqm | |
| 17 | 17 | Supply of Aluminium coloured Ridge for fixing at middle of roofing etc complete. | 30.3 | Mtr | |
| 18 | 18 | Supplying Fitting & fixing of MS Shutter with frame with MS angle frame of 35x35x6 mm and shutter section of 30x30x5mm MS angle with welding of 25x6 mm flat and welding of 16 gauge CR sheet with arrangement of clamp fitting of 3 nos of 4\" hinges 1 no 2\" hinges and 300mmx16 mm Aldrop with8\" Tower bolt including cost of all material etc complete. | 7.52 | Sqm | |
| 19 | 19 | M.S. Grill gate made out of M.S.flat conforming to IS:2062/2006, painted with red oxide primer as per the design approved . | 210 | Kg | |
| 20 | 20 | M.S.Panneled Window double leaved shutter with M.S.frame & Grill overall size including frame:- 1220mm (H) x 910mm (W) made out of the following materials conforming to relevant Indian Standard specifications. Frame :- 35x35x6mm M.S.angle, Shutter style :- Top & Bottom rail 25x25x3mm M.S.angle, Door panel :- 1.0mm C.R.Sheet. Panel stiffener covering width of each leaf :- 19x5mm M.S.Flat 2nos on each leaf. Hinges size :- 100mm 4nos (2nos each side) bought out as per ISS. Hold fast :- 35 x 35x 6mm M.S.Angle 100mm length bifurcated at the tip 2nos one each side. Handle :- 19x5mm M.S.Flat fabricated (inside) 2nos. Tower bolt :- 4nos bought out as per ISS. | 46.44 | Kg | |
| 21 | 21 | Providing and Laying Factory made Chamfered edge Cement Concrete Paver Bliocks of required strength, thickness & size/shape made by table Vibratory method , to attain superior smoth finish using PU or Equivalent moulds ,Laid in required gray colour and Pattern over 50mm thick Compacted bed of coarse sand , copmacting and proper embedding / laying of interlocking Paver Blocks into the sand bedding layer through vibratory compaction by using plate vibrator, Filling joints with Fine sand and cutting of Paver blocks as per required size/Pattern, finishing and sweeping extra sand in footpath , parks, lawns, drive ways, or light traffic parking and Lanes/Road etc, all complete as Per Manufacturers Specifications and Driection of Engg -In -Charge. 80mmm thick C.C. Paver Blocks of M-30 grade With approved colour design Pattern etc. complete. | 31.32 | Sqm | |
| 22 | 22 | Supplying all materials, labour, T&P and providing Reinforced Cement Concrete (1:1.5:3) using 12mm to 20mmsize BHGCB chips including centering and shuttering etc. complete. | 1 | Cum | |
| 23 | 22.01 | A Lintel : | 1.64 | Cum | |
| 24 | 22.02 | B Column Base footing : | 2.23 | Cum | |
| 25 | 22.03 | C Column Superstructure : | 1.12 | Cum | |
| 26 | 22.04 | D Beam | 0.37 | Cum | |
| 27 | 22.05 | E Water Tank Slab | 0.4 | Cum | |
| 28 | 22.06 | F Plinth Beam | 1.57 | Cum | |
| 29 | 23 | Supplying, fitting & placing uncoated HYSD reinforcement including cutting, bending,binding & placing the steel rods as per drawing & technical specifications with cost of binding wire 18 to 20 gauges, etc., complete. | 12.8 | Qntl | |
| 30 | 24 | Rigid & Smooth, Centring & shuttering for RCC/CC work etc. complete. | 68 | Sqm | |
| 31 | 25 | Supplying all materials, labour, T&P for painting two coats over iron work with any approved SE paint over a coat of primer including all cost, labour, T&P etc. complete. | 20.75 | Sqm | |
| 32 | 26 | Providing 6mm thick CP(1:4) with slurry treatment to RCC surface etc. complete. | 60 | Sqm | |
| 33 | 27 | Construction of Septic tank (2.0m X 0.9m)m size as per specification with brick masonary wall and RCC slab etc. complete. | 1 | Each | |
| 34 | 28 | Construction of RCC Ring Soak way pit - 1.20 m dia and 1.5 mtr deep etc. complete. | 1 | Each | |
| 35 | 29 | Providing, fitting, fixing up false ceiling of approved design and drawing in all floors with G.I Section on 4 walls to be fixed by means of steel screw and PVC plug and the G.l. grid 2’-0”x2’-0” to be suspended from ceiling by using 12.5mm thick Fire Line Gypsum Board including cost of all materials, all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge. | 55.1 | Sqm | |
| 36 | 30 | Supplying ,fitting & fixing of Orissa pan ,100mm.dia. H.C.I.,P-trap & jointing materials etc all complete as per the direction of Engineer-in-charge. | 2 | Each | |
| 37 | 31 | Supplying all materials, labour, T&P and cutting grooves in pucca floor or Brick wall and mending good the damages for taking G.I. pipes complete as per P.H. specification. | 6 | Mtr | |
| 38 | 32 | Supplying all materials, labour, T&P and cutting holes in brick or stone masonry wall for taking G.I. pipes, HCI pipes, and mending good the damages 375mm thick wall etc complete. | 4 | Each | |
| 39 | 33 | Providing and fixing to wall, ceiling and floor the pipe fittings of following nominal bore with clamps; including making good the wall ceiling and floor, all complete in ground floor (including the cost of materials ) as per the PHE specification and direction of the Engineer-in-charge. | 1 | Mtr | |
| 40 | 33.01 | A 20mm dia UPVC pipe | 20 | Mtr | |
| 41 | 33.02 | B 25mm dia UPVC pipe | 10 | Mtr | |
| 42 | 33.03 | C 40mm dia UPVC pipe Tube well to OHT and delivery line | 30 | Mtr | |
| 43 | 34 | Providing, fixing, fitting of following Brass / Gun metal/Chromium plated fitting of approved make (conforming to respective I.S. specifications ) including the jointing materials, if any all complete as per the PHE specification and the direction of the Engineer-in-charge. (Plaze/Ciser/Zigma) | 4 | Each | |
| 44 | 34.01 | 15mm dia C.P. concealed stop cock (plazza / Zigma / Mousami) | 4 | Each | |
| 45 | 34.02 | C.P. soap disc. | 3 | Each | |
| 46 | 34.03 | 15mm dia C.P. short body Bib cock (plazza / Zigma / Mousami) | 5 | Each | |
| 47 | 34.04 | 15mm dia C.P. long body Bib cock (plazza / Zigma / Mousami) | 2 | Each | |
| 48 | 34.05 | C.P. Towel ring | 1 | Each | |
| 49 | 34.06 | C.P. Towel rail 450mm x 25mm | 1 | Each | |
| 50 | 34.07 | Bevelled edge mirror(600mmx450mm) | 1 | Each | |
| 51 | 34.08 | 12.50ltrs/10ltrs. Capacity L.L.flushing cistern with complete fittings | 2 | Each | |
| 52 | 34.09 | 40mm brass /G.M.F.W.Valve (ISI) | 1 | Each | |
| 53 | 34.1 | Flat back standing Urinal (medium) | 1 | Each | |
| 54 | 35 | Supplying all material T&P for fitting and fixing of PVC water tank of 2000 lits with all lead , lift, taxes, and royalties etc complete. | 1 | Each | |
| 55 | 36 | Supplying all materials labour & T&P for constructing of brick masonry inspection chambers including cleaning of existing choked and damaged Inspection through sweepers dismantling and removal of old and damaged brick masonry work completely giving temporary chokes and when necessary till completion earth work in excavation in all kinds of soil, K.B. brick work in C.M. (1:5) with K.B. bricks having crushing strength not less than 75kg/cm2, 12mm thick cement plaster in C.M. (1:3) for both inside and outside of brick masonry work with neat cement punning on Top and inside surface area including benching and channelling work with C.C. (1:2:4) with 12mm Hard granite chips of requisite quantity and then plastering with C.M. (1:3) over it and then smooth finish with neat cement punning including cost of 80mm thick R.C.C. pre cast slab etc. all complete as per approved P.H.E.D. specification and direction of Engineer-in-charge. (750mm x 750mm x 450mm deep). | 2 | Each | |
| 56 | 37 | Supplying all materials labour & T&P for constructing of brick masonry gully trap chambers including cleaning of existing choked and damaged Inspection through sweepers dismantling and removal of old and damaged brick masonry work completely giving temporary chokes and when necessary till completion earth work in excavation in all kinds of soil, K.B. brick work in C.M. (1:5) with K.B. bricks having crushing strength not less than 75kg/cm2, 12mm thick cement plaster in C.M. (1:3) for both inside and outside of brick masonry work with neat cement punning on Top and inside surface area including benching and channelling work with C.C. (1:2:4) with 12mm Hard granite chips of requisite quantity and then plastering with C.M. (1:3) over it and then smooth finish with neat cement punning including cost of 80mm thick R.C.C. pre cast slab etc. all complete as per approved P.H.E.D. specification and direction of Engineer-in-charge. (250mm x 250mm x 675mm deep) | 1 | Each | |
| 57 | 38 | Providing, fitting, fixing P.V.C SWR pipe of standard manufactures, including all jointing, earthwork in excavation of trenches in all kinds of soil up to a depth of 0.9mtr. and refilling the trench in 0.3mtr. layers duly watered and rammed or fixing to walls with supply of naiks, bobbings, wall plugs all complete as per the PHD specification and the direction of the Engineer-in-charge. | 1 | Sqm | |
| 58 | 38.01 | 110mm dia PVC SWR pipe S/S | 50 | Mtr | |
| 59 | 38.02 | 110mm dia PVC single junction | 14 | Each | |
| 60 | 38.03 | 110 mm Plain Bend 45 degree | 14 | Each | |
| 61 | 38.04 | 110mm dia P.V.C. SWR Cowl | 4 | Each | |
| 62 | 39 | Labour for drilling and perfectly vertical bore hole of specified dia for specified depth below ground level through consolidated and consolidated roack with combination drilling rig as required to suit the site condition as per the direction of Engineer-in-charge including supply of rig with its accessories T&P and consumables etc to lowering of 125mm x 100mm dia GI/PVC/MS Pipe for housing fitted with socket with or without well screen and as per the necessary for soft medium, hard and boulders formation (GI/PVC/MS casing pipes if required to prevent collapse of over burden is to loweing and with drawing after compeltion of the tube well). | 75 | Mtr | |
| 63 | 40 | Lowering the following size of PVC ASTM Sch-80 housing pipe with or without slotted from ground level upto 45.00 mtr depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes T&P etc all complete and keeping the top of casing pipe threaded including plugging tubewell to prevent entry of foreign materials. | 60 | Sqm | |
| 64 | 40.01 | Lowering of 125mm dia PVC pipe=50.0m | 60 | Mtr | |
| 65 | 40.02 | Supply of 125mm dia PVC ASTM Sch--80 pipe includign all cost complete | 60 | Mtr | |
| 66 | 41 | Cleaning and developing the tube well with their own compressor continuous wored till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per direction of Engineer-in-charge. | 1 | Each | |
| 67 | 42 | Supply of 0.5 HP, 7ST 4\" dia ISI mark single phase submersible pumpset with pannel box etc. complete. (To be paid as per actual) | 1 | Each | |
| 68 | 43 | Cost of 32mm HDPE Pipe | 50 | Mtr | |
| 69 | 44 | Cost stainless steel nipple | 2 | Each | |
| 70 | 45 | Cost of 1.5sqmm electric Cable | 65 | Mtr | |
| 71 | 46 | Cost of Bore Cover | 1 | Each | |
| 72 | 47 | Cost of clamp | 1 | Each | |
| 73 | 48 | Cost of steel rope . | 55 | Mtr | |
| 74 | 49 | Cost of installation of pump including accessories etc. complete. | 1 | Each | |
| 75 | 50 | Fixing Vertified tiles in floors, treads or steps and landing over 25mm bed of C:M (1:1) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete | 44.51 | Sqm | |
| 76 | 51 | Fixing ceramic tiles in dados, skirting and risers of steps on 12mm C:P (1:3) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing etc complete | 51.42 | Sqm | |
| 77 | 52 | Supplying fitting and fixing of PVC framed with shutter for Doors etc. complete. | 3.87 | Sqm | |
| 78 | 53 | Add cost of photograph etc complete | 1 | No | |
| 79 | 54 | Add for internal and external electrification with three phase line and transformer. | 1 | No | |
| 80 | 55 | Add for site development etc. complete. | 1 | No | |
| 81 | 56 | Supplying all labour T&P materials making and installing the transparency board made of CC of approved size and design painted with green colour and letter writing printed with yellow white colour and directed by EIC. | 1 | No |
AI Tender Summary
Tender Timeline
Aug 30, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedSep 20, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 24, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender