Maintenance Of Various Sports Complexes/Golf Courses ( A/R And M/O For The Works Of Siri Fort Sports Complex For The Year 2019-20 ) Renovation Of Squash Courts At Siri Fort Sports Complex, Executive Engineer/Sports Division-1/Dda-Delhi
TDR : 21595903
Tender Notice
BOQ
Expired
Executive Engineer/Sports Division-1/Dda
Delhi
Maintenance Of Various Sports Complexes/Golf Courses ( A/R And M/O For The Works Of Siri Fort Sports Complex For The Year 2019-20 ) Renovation Of Squash Courts At Siri Fort Sports Complex
Name of Work: Maintenance of Various Sports Complexes/Golf Courses (A/R & M/O for the works of Siri Fort Sports Complex for the year 2019-20)Sub Head : Renovation of Squash Courts at Siri Fort Sports Complex.Estimated Cost : Rs.6,38,099/-
Sl.No.
Item Description
Item Code / Make
Quantity
Units
1
1
Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete. 8mm thick. Granite of any colour and shade.
BI01010001010000000000000515BI0100001113
71
Sqm
2
2
Grinding and polishing maple wood flooring with 3 phases machine grinding using 36, 60 & 120 grid abrasive with special drum senders followed by base preparation with special drum senders followed by base preparation with French chalk and WP-4 sealant of SIKa or of approved top coat with WP-1 of Sika or of approved top coat with WP-1 of Sika or oil approved make in accordance with WFMA and FIBA norms etc, complete as per direction of Engineer-in-charge.
BI01010001010000000000000515BI0100001114
246
Sqm
3
3
40mm wide game line marking with paint of approved brand and manufacture including masking tape etc to give an even shade. All complete as per direction of Engineer-in-charge.
BI01010001010000000000000515BI0100001115
70
mtr
4
4
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:\na.One or more coats on old work
BI01010001010000000000000515BI0100001116
205
Sqm
5
5
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete.\nA. On concrete work
BI01010001010000000000000515BI0100001117
366
Sqm
6
6
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G .I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G .I. intermediate channel with connecting clip s made out of 2.64 mm dia x 230 mm long G .I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugsat 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer \nA. 12.5 mm thick tapered edge Glass Reinforced Gypsum (GRG) board conforming to IS: 2095-(Part 3) : 1996 (Board with BIS certification marks) r in Charge but excluding the cost of painting with\n
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
