Construction Of Community Building At Laheriadih , Village - Laheriadih , Panchayat - Nagi , Block - Bishnugarh , District - Hazaribag
Tender Value
42.62 Lakhs
Estimated cost
Bid Submission
04 Sep 2019
0 days left
EMD
86000
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bishungarh → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Community Building At Laheriadih , Village - Laheriadih , Panchayat - Nagi , Block - Bishnugarh , District - Hazaribag
BOQ
| Name of Work: Construction of Community Building at Laheriadih, Village - Laheriadih, Panchayat - Nagi, Block - Bishnugarh, District - Hazaribag | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance up to 50M including all lifts with leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/I. | BI01010001010000000000000515BI0100001112 | 123.7 | M3 |
| 2 | 2 | Extra for earth work in hard soil as per specification and direction of E/I. (vide classification of soil item B) | BI01010001010000000000000515BI0100001113 | 123.7 | M3 |
| 3 | 3 | Earth filling in foundation trenches and plinth in layers not exceeding 150mm thick well watered, rammed, fully compacted and finally dressed with earth obtained from excavation of foundation trenches with a lead of 50m and lift of 1.5m all complete as per building specification and direction of E/l. (Mode of measurement compacted volume) | BI01010001010000000000000515BI0100001114 | 60.87 | M3 |
| 4 | 4 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labours, royaly and taxes all complete as per building specification and direction of E/l. | BI01010001010000000000000515BI0100001115 | 104.71 | M3 |
| 5 | 5 | Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes, royalty all complete as per building specification and direction of E/I. | BI01010001010000000000000515BI0100001116 | 229.97 | M2 |
| 6 | 6 | Providiag designation 75B brick work in Cement Mortar (1:6) in foudation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing taxes and royalty all complete job as per building specificition and direction of E/l. | BI01010001010000000000000515BI0100001117 | 30.04 | M3 |
| 7 | 7 | Providiag designation 75B brick work in Cement Mortar (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing taxes and royalty all complete job as per building specificition and direction of E/l. | BI01010001010000000000000515BI0100001118 | 84.92 | M3 |
| 8 | 8 | Providing P.C.C. M-150 with nominal mix of (1:2:4) in foundation with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of requisite F.M (2.5 to 3) including screening, shuttening, mixing cement concrete in mixer and placing in position, vibriting, striking, curing taxes and royalty all complete as per building specification and direction of E/l. | BI01010001010000000000000515BI0100001119 | 8.144 | M3 |
| 9 | 9 | Providing P.C.C./R.C.C. M-100 with nominal mix of (1:3:6) in foundation with approved quality of stone metal grade IV (37mm to 22.4mm) and clean coarse sand of requisite F.M (2.5 to 3) including screening, shuttening, mixing cement mortar in mixer and placing in position, vibriting, striking, curing tax and royalty all complete as per building specification and direction of E/l. | BI01010001010000000000000515BI0100001120 | 12.12 | M3 |
| 10 | 10 | Providing P.C.C./R.C.C. M-200 with nominal mix of (1:1½:3) in foundation with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of requisite F.M (2.5 to 3) including screening, shuttening, mixing cement mortar in mixer and placing in position, vibriting, striking, curing (but excluding the cost of reinforcement) tax and royalty all complete as per building specification and direction of E/l. | BI01010001010000000000000515BI0100001121 | 8.75 | M3 |
| 11 | 11 | Providing R.C.C. M-200 with nominal mix of (1:1½:3) in column with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of requisite F.M (2.5 to 3) including screening, shuttening, mixing cement mortar in mixer and placing in position, vibriting, striking, curing (but excluding the cost of reinforcement) tax and royalty all complete as per building specification and direction of E/l. | BI01010001010000000000000515BI0100001122 | 11.303 | M3 |
| 12 | 12 | Providing R.C.C. M-200 with nominal mix of (1:1½:3) in band at plinth level with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of requisite F.M (2.5 to 3) including screening, shuttening, mixing cement mortar in mixer and placing in position, vibriting, striking, curing (but excluding the cost of reinforcement) tax and royalty all complete as per building specification and direction of E/l. | BI01010001010000000000000515BI0100001123 | 8.87 | M3 |
| 13 | 13 | Providing R.C.C. M-200 with nominal mix of (1:1½:3) in band at lintel level with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of requisite F.M (2.5 to 3) including screening, shuttening, mixing cement mortar in mixer and placing in position, vibriting, striking, curing (but excluding the cost of reinforcement) tax and royalty all complete as per building specification and direction of E/l. | BI01010001010000000000000515BI0100001124 | 3.89 | M3 |
| 14 | 14 | Providing R.C.C. M-200 with nominal mix of (1:1½:3) in lintel with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of requisite F.M (2.5 to 3) including screening, shuttening, mixing cement mortar in mixer and placing in position, vibriting, striking, curing (but excluding the cost of reinforcement) tax and royalty all complete as per building specification and direction of E/l. | BI01010001010000000000000515BI0100001125 | 0.046 | M3 |
| 15 | 15 | Providing R.C.C. M-200 with nominal mix of (1:1½:3) in roof slab with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of requisite F.M (2.5 to 3) including screening, shuttening, mixing cement mortar in mixer and placing in position, vibriting, striking, curing (but excluding the cost of reinforcement) tax and royalty all complete as per building specification and direction of E/l. | BI01010001010000000000000515BI0100001126 | 30.396 | M3 |
| 16 | 16 | Providing R.C.C. M-200 with nominal mix of (1:1½:3) in beam of all types with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of requisite F.M (2.5 to 3) including screening, shuttening, mixing cement mortar in mixer and placing in position, vibriting, striking, curing (but excluding the cost of reinforcement) tax and royalty all complete as per building specification and direction of E/l. | BI01010001010000000000000515BI0100001127 | 15.35 | M3 |
| 17 | 17 | Providing av. 63mm thick R.C.C. M-200 with nominal mix of (1:1½:3) in chhajja with approved quality of stone chips 20mm to 10mm size graded and clean coarse sand of requisite F.M (2.5 to 3) including making drip coarse in concrete screening, centering, shuttening, mixing drip coarse in mixer and placing in position, vibriting, striking, 6mm cement plaster (1:4) in ceiling and sides of chhajja with sand of F.M. 1.5, curing (but excluding the cost of reinforcement) tax and royalty all complete as per building specification and direction of E/l. | BI01010001010000000000000515BI0100001128 | 21.44 | M2 |
| 18 | 18 | Providing 25mm thick damp proof coarse with cement concrete M-200 with nominal mix of (1:1½:3) with approved quality of stone chips of 20mm to 10mm size graded and clean coarse sand of F.M 2.5 to 3 including screening, shuttening, mixing cement concrete in mixer with 5% Cico or any other approved water proofing compound and placing in position, vibriting, striking, curing taxes and royalty all complete as per building specification and direction of E/l. | BI01010001010000000000000515BI0100001129 | 23.29 | M2 |
| 19 | 19 | Providing P.C.C./R.C.C. M-200 with nominal mix of (1:1½:3) in staircase with approved quality of stone chips 20mm to 10mm size graded and clean coarse sand of requisite F.M (2.5 to 3) including screening, shuttening, mixing cement mortar in mixer and placing in position, vibriting, striking, curing (but excluding the cost of reinforcement) tax and royalty all complete as per building specification and direction of E/l. | BI01010001010000000000000515BI0100001130 | 3.644 | M3 |
| 20 | 20 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.\nG.I. Pipes | BI01010001010000000000000515BI0100001131 | 210 | Kg. |
| 21 | 21 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with igment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 oarse sand) :\n25 mm thick | BI01010001010000000000000515BI0100001132 | 20.26 | M2 |
| 22 | 22 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to\nmatch the shade of the slabs, including rubbing and polishing complete. | BI01010001010000000000000515BI0100001133 | 5.855 | M2 |
| 23 | 23 | Providing and laying vitrified floor tiles in different sizes (thickness to be\nspecified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.\nSize of Tile 600x600 mm | BI01010001010000000000000515BI0100001134 | 159.1 | M2 |
| 24 | 24 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to\nIS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of atching shade complete. | BI01010001010000000000000515BI0100001135 | 169.28 | M2 |
| 25 | 25 | Providing and fixing pressed steel door frames conforming to IS: 4351,\nmanufactured from commercial mild steel sheet of 1.60 mm thickness,\nincluding hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:\nFixing with adjustable lugs with split end tail to each jamb | BI01010001010000000000000515BI0100001136 | 31.4 | M |
| 26 | 26 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.\nWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | BI01010001010000000000000515BI0100001137 | 1 | M2 |
| 27 | 27 | Supplying, fitting and fixing 35 mm thick solid core type non-decorative single leaf flush doors and windows with black board core banded with high quality phenol formaldehydes synthetic resin both side commercial veneered of standard make with oxidized iron fittings such as hinges, tower bolts, handle, cleats and sand block taxes all complete as per building specification and direction of E/I. | BI01010001010000000000000515BI0100001138 | 12.066 | M2 |
| 28 | 28 | Providing TMT steel reinforcement 8mm, 10mm, 12mm & 16mm dia bars as per approved design and drawing excluding carriage of M.S bar to work site, cutting, bending end binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction of E/I. | BI01010001010000000000000515BI0100001139 | 10.0922 | MT |
| 29 | 29 | Supplying, Fitting and fixing M.S grill made of 20 x 6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, hoisting carriage of grill to work site hoisting as per building specification and direction of E/I. | BI01010001010000000000000515BI0100001140 | 492 | Kg. |
| 30 | 30 | Providing and fixing fan hook of 16mm dia TMT M.S. bar 1 meter long bent to required size and shape placed in position and fixed in R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/I. | BI01010001010000000000000515BI0100001141 | 20 | nos. |
| 31 | 31 | Supplying, fitting and fixing collapsible gate of approved size and make properly fabricated with verticle double channels 20 x 10 x 2mm at 100 centres and braced with M.S. flat diagonals 20 x 30mm with top and bottom rails or T iron 40 x 40 x 6mm with 38mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers handles, including applying a priming coat of red lead paint, carriage, hoisting and all complete as per building specification and direction of E/l. | BI01010001010000000000000515BI0100001142 | 9.218 | M2 |
| 32 | 32 | Supplying, fitting and fixing local make fully glazed steel door, windows or ventilation of standard rolled 'Z' and mullion steel section and size as per IS - 38 joins met welded with 100 x 16 x 3mm M.S. lug fixed in cement concrete (1:2:4) blocks, 15 x 10 x 10cm size including cost of oxidized iron fitting with hinges, handle per step catch springs, 3mm thick plain glass panes with aluminium beads and inner frame fixed with lugs with 20mm long 6.3mm G.I. counter sunk machine screw and nuts and applying a coat of red lead paint carriage to work site hoisting and placing in position in all storys and taxes all complete as per building specification and direction of E/I. | BI01010001010000000000000515BI0100001143 | 22.862 | M2 |
| 33 | 33 | Providing 12 mm thick cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per specification and direcition of E/l. | BI01010001010000000000000515BI0100001144 | 53.98 | M2 |
| 34 | 34 | Providing 12 mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per specification and direcition of E/l. | BI01010001010000000000000515BI0100001145 | 763.97 | M2 |
| 35 | 35 | Providing 6mm cement plaster (1:4) in ceiling with clean coarse sand of F.M 1.5 including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I. | BI01010001010000000000000515BI0100001146 | 198.06 | M2 |
| 36 | 36 | Providing 1.5 mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/I. | BI01010001010000000000000515BI0100001147 | 53.98 | M2 |
| 37 | 37 | Providing 19mm water proof cement plaster (1:3) with clean coarse sand of F.M 1.5 with 5% cico or any other approved water proofing compound including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I. | BI01010001010000000000000515BI0100001148 | 156.24 | M3 |
| 38 | 38 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | BI01010001010000000000000515BI0100001149 | 961.92 | M3 |
| 39 | 39 | Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty where required, scaffolding , washing of floors and taxes all complete as per specification and direction of E/I. | BI01010001010000000000000515BI0100001150 | 611.3 | M2 |
| 40 | 40 | Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direction of E/I. | BI01010001010000000000000515BI0100001151 | 34.29 | M2 |
| 41 | 41 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | BI01010001010000000000000515BI0100001152 | 350.62 | M2 |
| 42 | 42 | Providing 250mm wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 250 mm apron including cost of EW involved, with 75mm cement concrete (1:4:8) over one brick designation 75A flat soling in proper grade and slope at the base, the drain duly plastered in C.M (1:3) with punning over exposed surface all complete as per specification and direction of E/I. | BI01010001010000000000000515BI0100001153 | 48.17 | M |
| 43 | 43 | Making plinth protection 50 mm thick of cement concrete 1:3:6 | BI010100041010000000000000515BI01000011120 | ||
| 44 | 44 | Carriage of materials by diesel truck including loading at source, unloading at work site and stacking properly, labour etc. all complete as per direction of E/I.\nBricks - Lead 18 km | BI01010001010000000000000515BI0100001155 | 58.483 | ‰ nos. |
| 45 | 45 | Sand - Lead 15 km | BI01010001010000000000000515BI0100001156 | 219.89 | M3 |
| 46 | 46 | Sand - Lead 15 km | BI01010001010000000000000515BI0100001157 | 18.077 | M3 |
| 47 | 47 | Stone Chips - Lead 25 km | BI01010001010000000000000515BI0100001158 | 74.16 | M3 |
| 48 | 48 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC olvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of ngineer in Charge. oncealed work, including cutting chases and making good the walls etc\n15 mm nominal outer dia Pipes | BI01010001010000000000000515BI0100001159 | 50 | nos. |
| 49 | 49 | 20 mm nominal outer dia Pipes | BI01010001010000000000000515BI0100001160 | 40 | nos. |
| 50 | 50 | Making holes in walls for G.I. pipe and restoring the same all complete as per specification and direction of E/I. | BI01010001010000000000000515BI0100001161 | 6 | nos. |
| 51 | 51 | Supplying and fitting 15mm dia C.P. brass bib cock all complete as per specification and direction of E/I. | BI01010001010000000000000515BI0100001162 | 6 | nos. |
| 52 | 52 | Supplying, fitting and fitting vitreous white glazed earthen ware wash hand basin of Parry or Hindustan or any other I.S.S. approved make supported on pointed C.I. or M.S. brackets 32m C.I. brass waste, 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350 grams, 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I. | BI01010001010000000000000515BI0100001163 | 2 | nos. |
| 53 | 53 | Supplying, fining and fixing viterous white glazed earthen ware I.W.C of Parry Hindustan or any other I.S.S approved make with 100mm H.C.I \"p\" trap 15 liters C.I. or C. pull and let go flushing cistern of names or other I.S.S equivalent make, complete with all fittings. C.I or C.C brackets 32mm alkathene/P.V.C telescopic flush, pipe about 2M long with one brass coupling and clamps G.I chain and pull including supplying and fixing a pair of viterous white glazed earthenware where footrest to be fixed in floor 15 mm C.I body brass spindle stope cock of weight not less than 50 grins. 15 mm P.V.C connection pipe 450mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I.\n580mm long with 12.50 litre low level P.V.C. cistern. | BI01010001010000000000000515BI0100001164 | 2 | nos. |
| 54 | 54 | Supplying, fitting and fixing the following items with all materials as per specification and direction of E/I.\nC.P. brass shop dish container medium quality with screw and hinges ect. | BI01010001010000000000000515BI0100001165 | 2 | nos. |
| 55 | 55 | Mirrors of 6mm thick plate glass bevelled edge mirror including C.P. brass revolving fitting, 3mm plywood board and C.P. hinges to fix with mirror, 450 x 300mm size | BI01010001010000000000000515BI0100001166 | 2 | nos. |
| 56 | 56 | C.P. brass towel rail 20mm x 600mm with bracket container. | BI01010001010000000000000515BI0100001167 | 2 | nos. |
| 57 | 57 | PTMT Towel Ring 215 x 200 x 37 S/F/F/ H.C.I.fitting. | BI01010001010000000000000515BI0100001168 | 2 | nos. |
| 58 | 58 | Supplying, fitting and fixing PVC pipe fittings all complete job.\n80 mm dia Door Tee | BI01010001010000000000000515BI0100001169 | 5 | nos. |
| 59 | 59 | 100 mm dia Door Tee | BI01010001010000000000000515BI0100001170 | 5 | nos. |
| 60 | 60 | 80 mm dia Plain Bend | BI01010001010000000000000515BI0100001171 | 5 | nos. |
| 61 | 61 | 100 mm dia Plain Bend | BI01010001010000000000000515BI0100001172 | 5 | nos. |
| 62 | 62 | 100 mm dia Door Bend | BI01010001010000000000000515BI0100001173 | 5 | nos. |
| 63 | 63 | 80 mm dia Door Bend | BI01010001010000000000000515BI0100001174 | 5 | nos. |
| 64 | 64 | 100 mm dia Cowel | BI01010001010000000000000515BI0100001175 | 5 | nos. |
| 65 | 65 | 80 mm dia Cowel | BI01010001010000000000000515BI0100001176 | 5 | nos. |
| 66 | 66 | Providing and fixing on wall face unplasticised Rigid PVC rain water\npipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.\n110 mm diameter | BI01010001010000000000000515BI0100001177 | 20 | nos. |
| 67 | 67 | Providing and fixing on wall face lasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.\nBend 87.5° - 110mm | BI01010001010000000000000515BI0100001178 | 2 | nos. |
| 68 | 68 | Bend 87.5° | BI01010001010000000000000515BI0100001179 | 2 | nos. |
| 69 | 69 | Supplying, fitting and fixing flat back or angular, lipped front viterous white glazed earthen ware Urinal of Parry Hindustan or any other I.S.S approved make with 5 liters capacity C.I. outomatic flushing cistern of Reliance or other I.S.S approved make with all fittings with C.I or R.S. brackets, standard size G.I. flush pipe with fitting clamps, 15 mm C.I body brass spindle stop cock of approved quality weight not less than 400 grams, 15 mm P.V.C./Alkethene pipe 450mm long with brass coupling at both ends and doing plumber joints including painting of exposed part with two coats of approved paint over a primer coat of red oxide, cutting wall and floor, making good the same etc. all complete as per specification and direction of E/I. | BI01010001010000000000000515BI0100001180 | 1 | nos. |
| 70 | 70 | Supplying Labour and tools for fixing G.I. Pipes with Red lead and yarn of following nominal bore with screwed and socketed joints on wall ceiling and floor including supplying and fitting of wall hooks or pipe clamps wooen plugs cutting pipes to size and threading ends if required etc. all complete as per specification and direction of E/I. (pipes with socket to be supplied departmentally free of cost )\n15mm dia | BI01010001010000000000000515BI0100001181 | 25 | nos. |
| 71 | 71 | 20mm dia | BI01010001010000000000000515BI0100001182 | 20 | nos. |
| 72 | 72 | 25mm dia | BI01010001010000000000000515BI0100001183 | 15 | nos. |
| 73 | 73 | Supplying and fixing gun metal full way valve of approved quality all complete as per specification and direction of E/I.\n25mm dia | BI01010001010000000000000515BI0100001184 | 1 | nos. |
| 74 | 74 | 32mm dia | BI01010001010000000000000515BI0100001185 | 1 | nos. |
| 75 | 75 | Providing and fixing brass / C.I. stop cock of approved quality all complete as per specification and direction of E/I.\nBrass Stop Cock - 15mm dia | BI01010001010000000000000515BI0100001186 | 2 | nos. |
| 76 | 76 | Supplying and fixing G.I. fittings of approved make all complete as per specification and direction of E/I.\nElbow - 15mm | BI01010001010000000000000515BI0100001187 | 4 | nos. |
| 77 | 77 | Elbow - 20mm | BI01010001010000000000000515BI0100001188 | 2 | nos. |
| 78 | 78 | Elbow - 25mm | BI01010001010000000000000515BI0100001189 | 2 | nos. |
| 79 | 79 | Tee Plain - 15mm | BI01010001010000000000000515BI0100001190 | 4 | nos. |
| 80 | 80 | Tee Plain - 20mm | BI01010001010000000000000515BI0100001191 | 4 | nos. |
| 81 | 81 | Tee Plain - 25mm | BI01010001010000000000000515BI0100001192 | 2 | nos. |
| 82 | 82 | Reducing Socket - 20mm | BI01010001010000000000000515BI0100001193 | 3 | nos. |
| 83 | 83 | Reducing Socket - 25mm | BI01010001010000000000000515BI0100001194 | 1 | nos. |
| 84 | 84 | Nipple - 15mm | BI01010001010000000000000515BI0100001195 | 4 | nos. |
| 85 | 85 | Nipple - 20mm | BI01010001010000000000000515BI0100001196 | 2 | nos. |
| 86 | 86 | Nipple - 25mm | BI01010001010000000000000515BI0100001197 | 1 | nos. |
| 87 | 87 | Plug - 15mm | BI01010001010000000000000515BI0100001198 | 2 | nos. |
| 88 | 88 | Plug - 20mm | BI01010001010000000000000515BI0100001199 | 2 | nos. |
| 89 | 89 | Plug - 25mm | BI01010001010000000000000515BI0100001200 | 2 | nos. |
| 90 | 90 | Reducing Tee Plain - 20mm | BI01010001010000000000000515BI0100001201 | 4 | nos. |
| 91 | 91 | Reducing Tee Plain - 25mm | BI01010001010000000000000515BI0100001202 | 2 | nos. |
| 92 | 92 | Union Socket - 15mm | BI01010001010000000000000515BI0100001203 | 2 | nos. |
| 93 | 93 | Union Socket - 25mm | BI01010001010000000000000515BI0100001204 | 2 | nos. |
| 94 | 94 | Jam Nut 15mm | BI01010001010000000000000515BI0100001205 | 2 | nos. |
| 95 | 95 | Jam Nut 25mm | BI01010001010000000000000515BI0100001206 | 1 | nos. |
| 96 | 96 | Socket Plain 15mm | BI01010001010000000000000515BI0100001207 | 4 | nos. |
| 97 | 97 | Socket Plain 20mm | BI01010001010000000000000515BI0100001208 | 2 | nos. |
| 98 | 98 | Socket Plain 25mm | BI01010001010000000000000515BI0100001209 | 1 | nos. |
| 99 | 99 | Cutting chhajjas or concrete for laying G.I. pipe and restoring the same with R.C.C. (1:2:4) brick work in cement mortar (1:4) and cement plaster (1:4) as per specification and direction of E/I. | BI01010001010000000000000515BI0100001210 | 5 | nos. |
| 100 | 100 | Earth Work in excavation in foundation for laying G.I. Pipe and restoring the same with R.C.C. (1:2:4) brick work in Cement moter plaster (1:4) as per specification and direction of E/I. | BI01010001010000000000000515BI0100001211 | 5 | nos. |
| 101 | 101 | Making holes in walls for P.V.C. pipe and restoring the same all complete as per specification and direction of E/I. | BI01010001010000000000000515BI0100001212 | 5 | nos. |
| 102 | 102 | Cutting drain widthwise above G.L. for laying H.C.I. pipe and restoring brick work in cement mortar (1:4), 12mm cement plaster in (1:4) with neat cement punning as per specification and direction of E/I. | BI01010001010000000000000515BI0100001213 | 5 | nos. |
| 103 | 103 | Supplying fittings and fixing H.C.I pipes with ear of approved make confirmimg to I.S.I. 1729 including Supplying paols and loose collars lead and yarn for making lead caulked joints, cutting pipes to size including earth work or scaffolding where necessary etc all complete as per specification and direction of E/I. | BI01010001010000000000000515BI0100001214 | 5 | nos. |
| 104 | 104 | Supplying and fixing H.C.I. fittings of approved make confirming to I.S.S. 1729 including supplying nails and bobbins, lead and yarn from making lead ckoaked joints including earth work and providing scaffolding as the case may be all complete as per specification and direction of E/I.\nH.C.I. Single Junction with Door -\n100mm dia (wt. 10.5 kg approx.) | BI01010001010000000000000515BI0100001215 | 4 | nos. |
| 105 | 105 | H.C.I. Bend with door and ear -\n100mm dia (wt. 6.5 kg approx.) | BI01010001010000000000000515BI0100001216 | 4 | nos. |
| 106 | 106 | H.C.I. Loffsets with ear -\n100mm dia (wt. 6 kg approx.) | BI01010001010000000000000515BI0100001217 | 4 | nos. |
| 107 | 107 | Norton patent H.C.I. Cowel -\n100mm dia (wt. 3.25 kg approx) | BI01010001010000000000000515BI0100001218 | 4 | nos. |
| 108 | 108 | Floor trap with granting -\n100mm dia | BI01010001010000000000000515BI0100001219 | 4 | nos. |
| 109 | 109 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.\nLight Point | BI01010001010000000000000515BI0100001220 | 35 | nos. |
| 110 | 110 | Fan Point | BI01010001010000000000000515BI0100001221 | 12 | nos. |
| 111 | 111 | Wiring for twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed steel conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. | BI01010001010000000000000515BI0100001222 | 5 | nos. |
| 112 | 112 | \nSupplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.\n5/6 amps switch | BI01010001010000000000000515BI0100001223 | 90 | nos. |
| 113 | 113 | 3 pin 5/6 amp socket outlet | BI01010001010000000000000515BI0100001224 | 35 | nos. |
| 114 | 114 | Telephone socket with shutter | BI01010001010000000000000515BI0100001225 | 2 | nos. |
| 115 | 115 | TV antenna socket outlet | BI01010001010000000000000515BI0100001226 | 2 | nos. |
| 116 | 116 | Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. | BI01010001010000000000000515BI0100001227 | 85 | nos. |
| 117 | 117 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required\n2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire | BI01010001010000000000000515BI0100001228 | 140 | nos. |
| 118 | 118 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire | BI01010001010000000000000515BI0100001229 | 130 | nos. |
| 119 | 119 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.\n72 mm X 146 mm X 48 mm deep | BI01010001010000000000000515BI0100001230 | 8 | nos. |
| 120 | 120 | 72 mm X 226 mm X 48 mm deep | BI01010001010000000000000515BI0100001231 | 10 | nos. |
| 121 | 121 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required. | BI01010001010000000000000515BI0100001232 | 2 | nos. |
| 122 | 122 | Supplying and drqwing following pair, 0.5 aq mm FR PVC insulated copper conductor, unarmoured telephone cable in the existing surface . Recessed PVC conduit as required. | BI01010001010000000000000515BI0100001233 | 60 | nos. |
| 123 | 123 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.\n20 mm | BI01010001010000000000000515BI0100001234 | 45 | nos. |
| 124 | 124 | Supplying and fixing following way prewired vertical type TP&N MCB distribution board of steel sheet for 415 volts on surface/ recess complete with loose wire box of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's, terminal connectors for all incoming and outgoing circuits, duly prewired with adequate size of FR PVC insulated copper conductor upto the terminal connector/ neutral link, earthing etc as required (But without MCB/ RCCB/ Isolator). (Note : Prewired vertical type MCB TPDB is normally used where 3 phase outlets are required.)\n4 way (4+12) Double Door, Horuzental | BI01010001010000000000000515BI0100001235 | 2 | nos. |
| 125 | 125 | 6 way (4+18) Double Door, Horuzental | BI01010001010000000000000515BI0100001236 | 3 | nos. |
| 126 | 126 | Supplying and fixing single 6 amps to 32 amps rating, 240 volts, \"B\" sereies miniature circuit breaker suitable for foghting and other loads of followong poles in the existing MCB DB complete with cover plate having locking arragement anf. Watering pipe etc. as required .(But without charcoal or coke anf salt)\n6/32 amps singal pole, \"B\" series | BI01010001010000000000000515BI0100001237 | 3 | nos. |
| 127 | 127 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. | BI01010001010000000000000515BI0100001238 | 1 | nos. |
| 128 | 128 | Extra for using salt and charcoal for G.L or copper plate earth alectrocde as required. | BI01010001010000000000000515BI0100001239 | 1 | nos. |
| 129 | 129 | Providing and laying and SWG copper wire at 05 meter below ground level for conductor earth electrode including soldering etc. As required. | BI01010001010000000000000515BI0100001240 | 5 | nos. |
| 130 | 130 | Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required. | BI01010001010000000000000515BI0100001241 | 1 | nos. |
| 131 | 131 | Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required. | BI01010001010000000000000515BI0100001242 | 6 | nos. |
| 132 | 132 | Providing and fixing copper tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run) | BI01010001010000000000000515BI0100001243 | 15 | nos. |
| 133 | 133 | Providing and fixing copper tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run) | BI01010001010000000000000515BI0100001244 | 10 | nos. |
| 134 | 134 | Providing and fixing testing joint, made of 20 mm X 3 mm thick copper strip, 125 mm long, with 4 nos. of tinned brass bolts, nuts, chuck nuts and spring washers etc. complete as required. | BI01010001010000000000000515BI0100001245 | 1 | nos. |
| 135 | 135 | Supplying and fixing fitting 10 watt led bulb of bajaj or havels as required. | BI01010001010000000000000515BI0100001246 | 35 | nos. |
| 136 | 136 | Supplying and fixing wall L.E.D. Helogen | BI01010001010000000000000515BI0100001247 | 1 | nos. |
| 137 | 137 | Supplying and fixing following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's, with provision of 100 amps TP 16 KA MCCB as incomer, interconnection between incomer MCCB and bus bars (but without MCB's/ MCCB) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) | BI01010001010000000000000515BI0100001248 | 2 | nos. |
| 138 | 138 | Supplying and fixing Special type bulk head fitting with 20 W CFL required. | BI01010001010000000000000515BI0100001249 | 5 | nos. |
| 139 | 139 | Supplying of Ceiling Fan as required. | BI01010001010000000000000515BI0100001250 | 12 | nos. |
| 140 | 140 | Supplying 3.5 core 50 sqm nn Armoud Care | BI01010001010000000000000515BI0100001251 | 52 | nos. |
| 141 | 141 | MV cable laying upto 400 sq mm in ground laying of one number PVC insulated and PVC sheathed xlpe power cable of 1.1 KV grade of size not exceeding 400 sq mm direct in grond including excavation sand sushioning protective covering and refilling the trench etc as required. | BI01010001010000000000000515BI0100001252 | 10 | nos. |
| 142 | 142 | MV cable laying upto 120sq mm in ground laying of one number PVC insulated and PVC sheathed xlpe power cable of 1.1 KV grade of size not exceeding 25 sq mm but not exeeding 120sq. mm direct in grond including excavation sand sushioning protective covering and refilling the trench etc as required. | BI01010001010000000000000515BI0100001253 | 10 | nos. |
| 143 | 143 | Cost of drilling in all kinds of soil and rock for installation of submersible/jet motor pump set with D.T.H. rig machine including aupply of all materials, labours, tools, drilling rig air compressor and equipment all well as fuel lubricants for doing boring for the construction of 200 x 150mm dia drilled well etc. including transporting of rig machine and other supporting vehicle upto work site as per direction of E/I.\n(a) 0.00 to 50.00 M below G.L. | BI01010001010000000000000515BI0100001254 | 50 | M |
| 144 | 144 | (b) 51.00 to 125.00 M below G.L. | BI01010001010000000000000515BI0100001255 | 75 | M |
| 145 | 145 | (c) 126.00 to 150.00 M below G.L. | BI01010001010000000000000515BI0100001256 | 25 | M |
| 146 | 146 | Supplying, assembling, lowering and fixing in vertical position in bore well, nplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, ncluding required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. | BI01010001010000000000000515BI0100001257 | 25 | M |
| 147 | 147 | Development of tube well in accordance with IS : 2800 (part I) and IS:11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, all as per requirement and direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001258 | 2 | hours.. |
| 148 | 148 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all omplete for borewell of:\n200 mm dia | BI01010001010000000000000515BI0100001259 | 2 | nos. |
| 149 | 149 | Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.\n200 mm clamp | BI01010001010000000000000515BI0100001260 | 2 | nos. |
| 150 | 150 | Supplying submersible pump set confirming to IS 8034 and motor confirming to IS 9283. Pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/noryl impeller. Motor suitable for working on 415 volt + 10%, 3 PH, 50 Hz A.C. supply with cable guard, thrust carbon/fibre bearing to withstand entire hydraulic thrust, water proof winding shall be provided. The pump set shall be suitable for direct coupling. Pump shall have suitable outlet as per manufacturer's design. Anti thrust steam lined non return valve shall be provided with pump. 3 metre submersible copper conductor cable in single/double run shall be provided with each pump.\n1.5 H.P. Submersible Motor Pump | BI01010001010000000000000515BI0100001261 | 1 | nos. |
| 151 | 151 | Supplying fitting and fixing of standard make starter panel board with arrangement of all necessary protection including all taxes,royalty etc all comlete job as per direction of E/I. | BI01010001010000000000000515BI0100001262 | 1 | nos. |
| 152 | 152 | Supplying fitting and fixing 3 core 4mm2 flat copper submersible cable FINOLEX/HAVELS make including all taxes,royalty etc all complete job as per direction of E/I. | BI01010001010000000000000515BI0100001263 | 130 | M |
| 153 | 153 | Supplying fitting and fixing lowering 50mm dia G.I collumn pipe - do -do - do all complete job as per direction of E/I. | BI01010001010000000000000515BI0100001264 | 115 | M |
| 154 | 154 | Goods & Services Tax (G.S.T.) @ 12% | BI01010001010000000000000515BI0100001265 | 3.76825e+06 | Rs. X |
| 155 | 155 | Labour Cess @ 1% | BI01010001010000000000000515BI0100001266 | 4.22044e+06 | Rs. X |
AI Tender Summary
Tender Timeline
Aug 29, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedSep 04, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 06, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender