Sales : +91-777 804 8217
| Name of Work: REPAIR TO JOINERY, FLOOR, TILES, SHEDS ROOF INCLUDING INTERNAL ELECTRIFICATION & PREVENTION OF LEAKAGE, SEEPAGE & PLUMBING WORK AT DELHI CANTT AREA UNDER AGE B/R-II DELHI CANTT. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Taking down cement or cement lime plaster on brick or stone walls/ceiling etc including raking out joints, hacking for key, scrubing down with water etc complete all as specified and directed. | 1300 | Sqm | |
| 2 | 2 | M&L for 15 mm thick, rendering over brick wall in CM 1:4 on fair faces, finished even and smooth without using extra cement, ,complete all as specified and as directed. | 800 | Sqm | |
| 3 | 3 | M&L for 15 mm thick, rendering over brick wall in CM 1:4 on fair faces, finished even and smooth without using extra cement, using liquid water proofing compound,complete all as specified and as directed. ( WPC will be measured and paid seperatly) | 250 | Sqm | |
| 4 | 4 | Material & labour for preparation of newly plastered surfaces of any description and applying two coats of cement base paint over a coat of primer complete all as specified and directed. | 1050 | Sqm | |
| 5 | 5 | M&L for rendering 15mm thick on any type of faces of brick work in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed . | 150 | Sqm | |
| 6 | 6 | M&L for prepartion of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of primer and two coats of wall care putty of make birla/JK complete all as specfied and directed. | 150 | Sqm | |
| 7 | 7 | M&L for rendering 5mm thick in CM(1:3) on concrete surface as in ceiling/chajja and rainforced cement concrect surfaces complete all as specified and directed. | 100 | Sqm | |
| 8 | 8 | M&L for preparation of newly plastered surfaces on ceiling and applying three coats of white wash, complete all as specified and directed. (Up to four Storeyed) | 100 | Sqm | |
| 9 | 9 | M&L for preparation of old decorated plastered or unplastered surfaces of wall and applying one coat of oil bounf distemper including preparation of old surfaces, complete all as specified and directed. | 300 | Sqm | |
| 10 | 10 | M&L for preparation of old decorated previously treated surfaces of ceiling by brooming down, scrapping down,smoke and efflorescent etc. and applying one coat of white wash complete all as specified and directed. | 200 | Sqm | |
| 11 | 11 | M&L for preparation of old decorated surfaces of any description and applying one coat of cement base paint on external wall surfaces complete all as specified and directed. ( Height of Bldg is upto 15 mtr ) | 2000 | Sqm | |
| 12 | 12 | Supply only Liquid water proofing compound complete all as specified and as directed.Make: FOSROC or equiavalent | 37 | Ltr | |
| 13 | 13 | M&L for coloured digital vitrified tiles 10mm thick in floors etc, area of each tile not exc 0.36sqm, set and jointed in neat cement slurry and pointed with white or coloured cement with pigment to match the shade of tile, over and including screed bed 15mm thick in CM 1:6 complete including dismantling of floor, hearth or wall tiling with cement mortar bedding, backing and dispose rubbish out off the premises complete all as specified and directed. | 160 | Sqm | |
| 14 | 14 | All as per ser Item No-13 here -in-before but on vertical surface as in dados/skirting over 10mm thick rendering as backing coat in CM 1:4 complete all as specified. | 8 | Sqm | |
| 15 | 15 | M&L for non skid coloured digital tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11Sqm and not exc 0.18Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement with pigment to match, over and including screed bed 15mm thick in CM 1:6 complete including dismantling of floor, hearth or wall tiling with cement mortar bedding,backing and dispose rubbish out off the premises complete all as specified and directed. | 160 | Sqm | |
| 16 | 16 | M&L for Glazed coloured digital tiles 7 to 8mm thick, area of each tile exceeding 0.06Sqm and not exc 0.16Sqm in vertical surfaces etc,set and jointed in neat cement slurry and pointed in white or coloured cement with pigment to match, over and including 10mm thick rendering in CM 1:4 complete including dismantling floor, hearth or wall tiling incluidng cement mortar bedding , backing and dispose rubbish out off the premises complete all as specified and directed. | 160 | Sqm | |
| 17 | 17 | Demolition of Cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) | 25 | Cum | |
| 18 | 18 | M&L for 40 mm thick plain cement concrete type B-1,1:2:4 ( using 20 mm graded crushed stone aggregate) as in floors, finished even and smooth using extra cement complete all as specified. | 100 | Sqm | |
| 19 | 19 | Supply only glass diving strips, 3 mm thick and 38mm width inserted in position, confirm to design. | 80 | RM | |
| 20 | 20 | M&L for Ultra design coloured tiles with PU coating of size 300x300x25 mm thick rubber moulded with white cement, as in floors over and including 15 mm thick screed bed in CM 1:6, jointed and pointed in neat cement slurry complete all as specified and directed.Make: Coral, A-1, Hindustan. | 90 | Sqm | |
| 21 | 21 | M&L for plain cement concrete type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) as in sub base, complete all as specified and directed. | 8 | Cum | |
| 22 | 22 | Material and labour for plain cement concrete type C-1, 1:3:6 (using 20mm graded crushed stone aggregate), 75mm thick, as in plinth protection/pavment and the like, finishing the surfaces even and fair without using extra cement complete all as specified and directed. | 90 | Sqm | |
| 23 | 23 | M&L in repairs, Granite stone slab 18 to 20 mm thick,(table rubbed and polished), bedded and jointed in neat cement slurry and pointed in white or coloured cement with pigment to match the colour of granite stone with and including polishing of exposed edge over screed bed of 20mm thick in cement mortar 1:6 complete all as specified and directed. | 20 | Sqm | |
| 24 | 24 | M & L in repairs, 60mm thick, precast colour concrete decorative interlocking paver block any shape and size, rubber moulded with PU coating including 25mm thick sand filling under floors including watering and consolidation complete all as specified and directed. | 160 | Sqm | |
| 25 | 25 | M& L for cement concrete type B-1, 1:2:4 (using 20mm graded crushed stone aggregate) in roof, kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. | 1 | Cum | |
| 26 | 26 | M&L in repairs, machine cut kota stone slab flooring 18 to 20 mm thick over and including bedding layer of 20 mm thick in cement mortar 1:6, laid and jointed in neat cement slurry mixed with pigment to match the shade of the slab including rubbing and polishging complete all as specified and directed. | 80 | Sqm | |
| 27 | 27 | Demolition of RCC (reinforcement cut as required to facilitate demolition) Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete as specified. | 2 | Cum | |
| 28 | 28 | M&L for formwork to soffit of suspended slabs,such as roof slabs, floor slabs,landing and simillar work n.exc 200mm thick (Horizontal or sloping). complete as specifiedand directed. | 20 | Sqm | |
| 29 | 29 | M&L for RCC (nominal mix) type B-1, 1:2:4 (using 20mm graded crushed stone aggregate) as in Slab supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and directed. | 2 | Cum | |
| 30 | 30 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hoopingfor columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified. | 180 | Kg | |
| 31 | 31 | Taking down chowkhats or frames with shutters n.exc 1.5 sqm each(without taking off shutters from the frame) all as specified and directed. | 30 | Each | |
| 32 | 32 | All as per srl item No-31 here- in- before but exc 1.5 sqm but n.exc 4sqm each. | 20 | Each | |
| 33 | 33 | Taking down shutters exc 1sqm but not exc 2 sqm each all as specified and directed. | 20 | Each | |
| 34 | 34 | S&F for framed work as in doors or gates of angle or other section with gusset plates,rails,braces, etc.,complete drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete, all as specified and directed. | 200 | Kg | |
| 35 | 35 | S&F for steel windows with side hung shutter including box type hinges with steel handle and steel peg stay complete with glazing/gauging bars, dovetailed or welded complete all as specified and directed. | 30 | Sqm | |
| 36 | 36 | S&F for MS bars as in window guard bars welded to steel window frame or fixed to wooden frame all as specified and directed. | 150 | Kg | |
| 37 | 37 | S &F for 35mm thick, second class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc edges of framing plain, chamfered or rounded , fitted with cut and mitered beads for securing wire cloth etc,sizes of members of shutters as specified in SSR Part I, Section 8,clause 8.24(a) complete all as specified and directed. | 20 | Sqm | |
| 38 | 38 | S&F for 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. | 30 | Sqm | |
| 39 | 39 | M & L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. | 110 | Sqm | |
| 40 | 40 | M & L for preparation of old wooden surfaces of any description over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed. | 50 | Sqm | |
| 41 | 41 | M & L for preparation of old steel surfaces of any description over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed. | 100 | Sqm | |
| 42 | 42 | M & L for preparation of new steel surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. | 150 | Sqm | |
| 43 | 43 | S&F for anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. | 20 | Kg | |
| 44 | 44 | S&F for aluminium door shutters, powder coated fixed to wall with steel fastner minimum four number each side partly glazed with 5 mm thick tinted glass and partly panelled with 8mm thick colouered aluminium composit panels including rubber beading, joining cleat for fixing in position, 2 numbers aluminium door handle 250 mm long, 1 number aluminium barrel tower bolt 200 mm long ,1 number aluminium floor door spring & one No 4 liver mortice lock of Godrej of size 100 mm in each shutter will be provided all as specified and directed as per following specifications --\n\n(a) Vertical Members of shutter (Style) Section shall be of size 85.00 x 44.45 x 1.50 mm (Section No 19560)\n(b) Top rail ( Top Members) of shutter Section shall be of size 85.00 x 44.45 x 1.50 mm (Section No 19581)\n(c) Lock rail (Middle member) of shutter Section shall be of size 150.00 x 44.45 x 1.50 mm (Section No 19596)\n(d) Bottom rail ( Bottom Members) of shutter Section shall be of size 150.00 x 44.45 x 1.50 mm (Section No 19584)\n(e) Glazing clip for securing glass of shutters shall be of 0.80 mm thick (Section No 19370). Standered quality rubber beading shall be used for securing of glass \n(f) Top, Bottom and verticle member of shuttert will be tightened with hexagonal nut and purposly made bolt of 10mm dia MS round bar threaded on both the end . Note:-(i) Section No given above are of make Jindal, Contractor may use similar section of other make mention in Appx B. | 20 | Sqm | |
| 45 | 45 | S & F aluminium powder coated three track window ( two shutters glazed & one shutters wire gauge) with frame, glazed with 4 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber beading joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc all as specified below :--\n(a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 21447)\n(b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 21446)\n(c) Top & side Members of shutter Section shall be be of size 18.00 x 40.00 x 1.50 (Section No 21455)\n(d) Interlock Section of Shutter shall be be of size 18.00 x 40.00 x 1.50 (Section No 21454)\n(e) Bottom Members of shutter Section shall be be of size 18.00 x 40.00 x 1.50 (Section No 20844)\nNote:-(i) Section Number given above are of make Jindal, Contractor may use similar section of other make mention in Appx . | 15 | Sqm | |
| 46 | 46 | M&L for resecuring , easing and adjustment without taking down shutters of any description exc 1.00 Sqm but n exc 2.0sqm complete all as specified and as directed. | 70 | per leaf | |
| 47 | 47 | M&L for resecuring , easing and adjustment without taking down Aluminium shutter of any description exc 1 Sqm but n exc 2.0sqm including replacement of necessary rubber packing , steel scew ,etc complete all as specified and as directed. | 50 | per leaf | |
| 48 | 48 | M&L in repairs, Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixedcomplete all as specified and directed. | 4 | Each | |
| 49 | 49 | S&F in repairs, Aluminium (Die Cast) body door closer hydraulically regulated, designation No 3, universal type, suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and directed. | 20 | Each | |
| 50 | 50 | S&f in repairs, 5.0mm thick ordinary glass exceeding 0.5 sqm in each pane, complete all as specified and dricted. | 10 | Sqm | |
| 51 | 51 | S&F for aluminium anodised powder coated Deco grill (DG-104), 10mm wide with U shape snap beading complete all as specified and directed. | 30 | Sqm | |
| 52 | 52 | S&F for factory made solid panel PVC door shuter, 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails & MS frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement of stiles and plain colour PVC sheets for top rail,lock rail & bottom rail, on either side & as gap insert for top rail & bottom rail & panelling of plain colour PVC sheet to be fitted in the MS frame welded/Sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drawing complete all as specified and directed. | 30 | Sqm | |
| 53 | 53 | S&F for solid door frame 50mmx47mm, made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed. | 100 | RM | |
| 54 | 54 | S & F for 100mm medium weight, stainless steel, butt hinges complete all as specified | 150 | Each | |
| 55 | 55 | S&F for aluminium anodised, barrel tower bolt 200mm long, extruded section complete all as specified. | 90 | Each | |
| 56 | 56 | S&F for 250mm long aluminium alloy, anodised sliding bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts and extruded section or cast aluminium alloy and fixed complete all as specified and directed. | 20 | Each | |
| 57 | 57 | S&F for 150mm size extruded aluminium handle, fabricated type, anodised complete all as specified and directed. | 80 | Each | |
| 58 | 58 | S&Fix in repair, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks/stainless steel wire staples complete all as specified and directed. | 60 | Sqm | |
| 59 | 59 | S&F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks/stainless steel wire staples complete all as specified and directed. | 20 | Sqm | |
| 60 | 60 | M&L in repairs, brass coated aluminium decorative curtain rod 20mm dia of make VISTA or equivalent including brackets, side knobs and fixed to wall complete all as specified and directed. | 100 | RM | |
| 61 | 61 | Hacking out, old broken glass panes (any thickness, size, quality or description) from wooden/steel frames complete all as specified. | 50 | Sqm | |
| 62 | 62 | S&F for 4mm thick plain sheet glass, ordinary quality and glazing with oil putty or wooden beeds in square not exceeding 0.5 sqm in each pane complete all as specified and directed. | 60 | Sqm | |
| 63 | 63 | Cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipe etc for 500 to 1000 ltrs capacity of tanks, complete all as specified and directed. (Up to four Storey) | 80 | Each | |
| 64 | 64 | S&F in repairs, rotational moulded polyethylene water storage tanks, tripple-layered,colour-white, 500 Ltr capacity, (cylindrical, vertical with closed top) make: Sintex, Rotex,hoisted and fixed in position including 20 mm bore PTMT high pressure, float valve with aluminium rod and ball, make: Prayag India complete all as specified and directed. | 5 | Each | |
| 65 | 65 | S&F in repairs, rotational moulded polyethylene water storage tanks, tripple-layered,colour-white, 1000 Ltr capacity, (cylindrical, vertical with closed top) make: Sintex, Rotex,hoisted and fixed in position including 20 mm bore PTMT high pressure, float valve with aluminium rod and ball, make: Prayag India complete all as specified and directed. | 15 | Each | |
| 66 | 66 | S&F in repairs, stainless steel plate rack, made of 0.80mm thick sheet of size 900x600x250mm fixed to wall with suitable rawl plug complete all as specified and directed. | 4 | Each | |
| 67 | 67 | S&F in repairs, sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes;including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe,overall size 495mm x 420mm, bowl size 410mm x 330mm x 160mm complete all as specified and directed. | 4 | Each | |
| 68 | 68 | S&F in repairs, 15mm bore tubes, medium grade, galvanized, ISI marked with all fittings, short pieces and fixed to walls complete all as specified and directed. | 150 | RM | |
| 69 | 69 | S&F in repairs, 20mm bore tubes, medium grade, galvanized, ISI marked with all fittings, short pieces and fixed to walls complete all as specified and directed. | 120 | RM | |
| 70 | 70 | S&F in repairs, 15 mm bore, bib tap standard of PTMT any colour screwed, for iron pipe and fixed complete all as specified and directed. Make : Prayag,Symet, Polytuf | 10 | Each | |
| 71 | 71 | S & F in repairs, fancy type, chromium plated, long body, bib taps, 15mm bore with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule and fixed complete all specified and directed. Make : Jaquar, Roca, Hindware. | 15 | Each | |
| 72 | 72 | Cutting, chases, pinning in, making good to facing where required and pointing in CM (1:3) for concealed water tubing etc as in brick walls, cutting not exc 10cm girth, complete all as specified and directed. | 10 | RM | |
| 73 | 73 | S & F in repairs, angular stop cock, chromium plated, cast copper alloy, 15mm bore, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipes or for unions complete all as specified and directed. Make : Jaquar, Roca, Hindware. | 20 | Each | |
| 74 | 74 | S & F in repairs, 15 mm bore, Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. | 20 | Each | |
| 75 | 75 | S & F in repairs, 20mm bore, Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. | 20 | Each | |
| 76 | 76 | S&F in repairs, Sheet glass shelf assembly conisting of 5.0mm thick sheet glass shelf 12cm wide with Chromium plated bracket, guard and railing 60cm long, complete all as specified and directed. | 10 | Each | |
| 77 | 77 | S&F in repairs, Pillar taps, cast copper alloy with capstan heads,chromium plated screwed down, high pressure with or without lettered hot or cold with long screwed sank and fly nuts, screwed for iron pipe of 15 mm bore complete all as specified and directed. Make : Jaquar, Roca, Hindware. | 15 | Each | |
| 78 | 78 | S& F in repairS,15 mm bore Centre hole basin (Brass CP) mixer for mixing hot & cold water, screwed down for iron pipe and fixed complete all as specified and directed. Make : Jaquar, Roca, Hindware. | 8 | Each | |
| 79 | 79 | S&F in repairs, 15 mm bore wall mixer , cast copper alloy , with capstan heads, chromium plated, screwed down high pressure , with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. Make : Jaquar, Roca, Hindware. | 8 | Each | |
| 80 | 80 | S & F in repairs, 20 mm dia, brass CP towel rail 24\" long complete all as specified and directed. | 10 | Each | |
| 81 | 81 | S&F in repairs, glass corner shelf of 5mm thick, 250mm radius with guard bar fixed to bathroom corner complete all as specified and directed. Make: Pyayag, Hindware, Cera | 10 | Each | |
| 82 | 82 | S & F in repairs, CP hygienic spray (2 in 1 faucet with 1.5 mtr long tube) complete all as specified and directed. Make: Pyayag, Hindware, Cera | 25 | Each | |
| 83 | 83 | S&F in repairs, chromium plated spray jet for WC with 1.00 meter long PVC pipe including necessary fitting complete all as specified and directed. Make: Pyayag, Hindware, Cera | 15 | Each | |
| 84 | 84 | S & F for 100mm chromium plated grating round shape fixed over floor trap with coloured cement complete all as specified and directed. \n | 40 | Each | |
| 85 | 85 | S& F in repairs, vitreous china wash hand basins with fixing accessories including CP waste coupling 32mm dia, waste pipe (under / over counter ), of any colour, size of basin: 555X425X195mm, shape: Oval, fixed complete all as specified and directed. Make: FLS_WHT_5701 or equivalent. | 5 | Each | |
| 86 | 86 | S & F in repairs, vitreous china wash hand basin, white, flat back of size 550x400mm, including cutting for and pinning in ends of brackets, PVC flexible waste pipe 32mm dia, brass chromium plated waste fittings, PVC connection 450mm long complete all as specified and directed. Make: Parryware, Hindware, Cera | 8 | Each | |
| 87 | 87 | S& F in repairs, 32mm dia PVC waste pipe for WHB with union complete all as specified and directed. | 40 | Each | |
| 88 | 88 | S& F in repairs,15mm bore PVC connection of 450mm long with 2 Nos brass check nuts with washers complete all as specified and directed. | 80 | Each | |
| 89 | 89 | S& F in repairs, PVC low level, flushing cistern, valveless, 10 ltrs capacity, syphonic action type with inlet, ball valve, float and handle including brackets and flush pipe of 32mm dia with brass nut & washer, PVC connection, etc. connecting with WC inlet and making good the surface to match with existing complete all as specified and directed. Make : Parryware,Cera,Commander | 10 | Each | |
| 90 | 90 | S&F in repairs, vitreous china wash down water closet pan (padestal pattern), white colour (excluding flushing cistern and flush pipe), closed pattern white seat cover complete all as specified and directed. Make : Hindware,Cera,Parryware | 8 | Each | |
| 91 | 91 | S&F in repairs,vitreous china squattting pan, 'Orissa' pattern, size 580 x 440 mm, white, with integral foot rests excluding flushing cistern but including connection to trap, anti syphonage pipe etc. complete all as specified and directed. Make : Hindware,Cera,Parryware | 8 | Each | |
| 92 | 92 | S&F for Plastic water closet seat, white colour, closed pattern with flat bottom, and cover and mild steel chromium plated hinging device complete all as specified and directed. | 10 | Each | |
| 93 | 93 | S&F in repairs, Plastic water closet seat soft touch, white colour, closed pattern with flat bottom, and cover and mild steel chromium plated hinging device complete all as specified and directed. | 4 | Each | |
| 94 | 94 | S&F in repairs, vitreous china urinal half stall type, white, including waste pipe, complete all as specified and directed. Make : Hindware,Cera,Parryware | 10 | Each | |
| 95 | 95 | S&F in repairs, Looking mirror of selected quality glass and fixed to wall with suitable arrengements complete all as specified and directed. | 2 | Sqm | |
| 96 | 96 | S&F in repairs, 600mmx450mm, bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washes complete all as specified and directed. | 10 | Each | |
| 97 | 97 | S&F in repairs,100mm dia, sand cast, cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints laid in trenches or in floors or fixed on wall with clamps complete all as specified and directed. | 40 | RM | |
| 98 | 98 | S&F in repairs,75mm dia, sand cast, cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints laid in trenches or in floors or fixed on walls with clamps complete all as specified and directed. | 20 | RM | |
| 99 | 99 | S&F for 100 mm dia, cast iron bends(any radius) diminishing pieces or tapers(;larger bore measured) complete all as specified and directed. | 10 | Each | |
| 100 | 100 | S&F for 75 mm dia, cast iron bends(any radius) diminishing pieces or tapers(;larger bore measured) complete all as specified and directed. | 10 | Each | |
| 101 | 101 | S&F for 75mm cast iron branch pieces,double (equal or unequal),ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed. | 8 | Each | |
| 102 | 102 | S&F for 100mm cast iron branch pieces,double (equal or unequal),ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed. | 10 | Each | |
| 103 | 103 | S&F in repairs, 110 mm bore, PVC rain water pipe, single socketed, in any length with rubber ring, fixed to wall with clamp, complete all as specified and directed. | 50 | RM | |
| 104 | 104 | S&F for 100mm cast iron Nahani trap with grating, including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed. | 6 | Each | |
| 105 | 105 | Demolition of brick work built in cement morter including all quoins arches pillars etc. | 20 | Cum | |
| 106 | 106 | M&L for brick work with sub class 'B' bricks , straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed. | 20 | Cum | |
| 107 | 107 | M&L in repair for providing pre-cast reinforced cement concrete, type B0, 1:2:4 (using 12.5 mm graded crushed stone aggregate) as in jallies, 35mm thick (measured solid) set in cement mortar 1:4 complete all as specified and directed. | 100 | Sqm | |
| 108 | 108 | M & L for providing cement concrete, type B0, 1:2:4 (using 12.5mm graded crushed stone aggregate) as in coping and like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. | 2 | Cum | |
| 109 | 109 | S&F in repairs, vertical venetian blinds of any colour and size as approved by Engr-in-Charge fixed to wall including all accessories complete all as specified and direcred. | 20 | Sqm | |
| 110 | 110 | Dismantling of timber scantling 40 sqcm and over in section, in any position complete all as specified and directed. | 0.4 | Cum | |
| 111 | 111 | Dismantaling wrought iron or mild steel work of any description not otherwise provided for all as specified and direcred. | 2 | Qtl | |
| 112 | 112 | S&F for roof trusses (framed), trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) ,round or square pipes including distance pieces etc.complete all as specified and direcred. | 400 | Kg | |
| 113 | 113 | S&F for steel work in tubler trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade st-240 complete all as specified and direcred. | 300 | Kg | |
| 114 | 114 | S & F in repairs, 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations, side lap, fixed with L-type or J-type screws and washers, in roofs, walls etc. with grade of zinc coating 275,complete all as specified and direcred. | 70 | Sqm | |
| 115 | 115 | S & F in repairs, 1.00 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings length and girth as fixed) with grade of zinc coating 275 including welded or shoulder as required complete all as specified and direcred. | 40 | Sqm | |
| 116 | 116 | Dismantling asbestos cement (corrugated, semi corrugated etc) sheet in roof coverings including ridges,valley gutters etc complete all as specified and directed. | 350 | Sqm | |
| 117 | 117 | S&F for 6mm thick, AC corrugated or semi corrugated sheets in roofs, walls etc fixed with L- type or J- type or cranked hook bolts and washers in roof complete all as specified and directed. | 150 | Sqm | |
| 118 | 118 | S&F for 6mm thick, Asbestos cement two piece serrated ridge , suitable for corrugated or semi corrugated sheet complete all as specified and directed. | 10 | RM | |
| 119 | 119 | S&F for 2mm thick, fibre glass reinforced translucent plain/corrugated sheeting with two corrugation side lape fixed L- type or J- type or cranked hook bolts and washers in roof complete all as specified and directed. | 10 | Sqm | |
| 120 | 120 | S&F for Pre- painted galvalume aluminum zinc coating GI based steel sheet of approved profile of corrugation, 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. | 80 | Sqm | |
| 121 | 121 | S&F in repairs, running welding in any section complete all as specified and directed. | 20 | RM | |
| 122 | 122 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets & frame work.all as specified and directed. | 200 | Sqm | |
| 123 | 123 | M & L for 4 mm thick, non asbestos fibre cement building boards fixed or laid / inserted to timber/ GI / Aluminium frame work with screws complete all as per manufacturers instructions and as directed. | 150 | Sqm | |
| 124 | 124 | M&L for 4mm thick Asbestos cement plain building boards, fixed to timber or steel frame work with screws complete all as specified and directed. | 50 | Sqm | |
| 125 | 125 | S&F for GI powder coated frame work of size 605 x 605 mm, for seamless celing comprising of GI perimeter chanel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed. | 150 | Sqm | |
| 126 | 126 | S/F in repairs, mortice lock with 2 lever vertical type, brass body, 65mm long suitable for single shutter aluminium door complete all as specified. | 8 | Each | |
| 127 | 127 | Dismantling old mud phuska with earth/sand of any depth, roof brick tiles including cement mortar bedding and removing debries out side MOD Land comlete all as specified and directed. | 43.75 | Cum | |
| 128 | 128 | M&L for cement concrete Type B0,1:2:4 (using 12.5mm graded crushed stone aggregate) in roof padding, roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. | 2.1875 | Cum | |
| 129 | 129 | M&L for preparation/roughening of the plastered/unplastered roof surfaces including removal of grass, small trees and fix the APP based polymeric water proofing membrane of minimum 3mm thickness & weighing not less than 3.6kg/sqm of Make : 'Superthemolay' manufactured by M/S STP Ltd or HYPER PLAS (Poleyster) manufactured by M/S IWL ltd or SHALIPLAS (Poleyster) manufactured by M/S Capital Steels and chemicals Pvt Ltd as approved by GE, black finished reinforced with non-woven poleyster matt. With a thermofusible finish laid over hot bitumen 85/25 grade @ 1.2 Kg/Sqm over bitumenous primer at the rate of 0.40 kg/sqm, torching overlaps with a propane or a butane gas torch with a overlap of 100 mm at the sides and 150 mm at the ends and sealing applying a consistent coat of silver streak bituminous paint over APP surface all as per manufacturers instructions over and including screed bedding 15mm thick on brick/roof surfaces in cement mortar 1:4, mixed with water proofing compound as per manufactrurs instruction complete all as directed and specified | 43.75 | Sqm | |
| 130 | 130 | Racking out old joints of roof tiles and M&L for flush pointing in cement mortar (1:3) mixed with SBR of FOSROC upto depth of 20mm complete including cutting / removing vegetation, complete all as specified and directed. | 100 | Per 10 Sqm | |
| 131 | 131 | S&F in repairs, 15mm bore, ball valves high presure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (minimum weight 142 gram) complete all as specified and directed. | 20 | Each | |
| 132 | 132 | S&F in repairs, 20mm bore, ball valves high presure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (minimum weight 210 gram) complete all as specified and directed. | 30 | Each | |
| 133 | 133 | S&F in repairs, 25mm bore, ball valves high presure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (minimum weight 455 gram) complete all as specified and directed. | 25 | Each | |
| 134 | 134 | S&F for steel powder coated, coat hook of 6 peg complete all as specified and directed. | 30 | Each | |
| 135 | 135 | Removal of plants/trees of girth n exe 30 cm from roof tops/sides, external walls of bldg, chajjas, wall junctions, junctions of rain water/CI soil/waste pipe junctions including taking out the roots entered in wall/slab surfaces and making good the disturbed surfaced using PCC (1:2:4) type B-0 or cement mortar (1:2) including repairing the GI/CI/PVc pipe joints which were damged during cutting/taking out process to match with the existing and finishing the disturbed surfaces to match with existing including necessary scaffolding/staging upto a height of 15.00 m from the ground level and removing debries out side MOD Land comlete all as specified and directed. | 200 | Each | |
| 136 | 136 | Dismantling boarding, any description fixed in any position with screwes etc complete all as specified and directed. | 30 | Sqm | |
| 137 | 137 | S&F for 18/19mm thick, block boards, grade 2 quality, interior grade, comercial type, fixed with screws to timber frame work complete all as specified and directed. | 10 | Sqm | |
| 138 | 138 | S&F for 18/19mm thick, particale board, medium density, flat pressed, single line layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work complete all as specified and directed. | 10 | Sqm | |
| 139 | 139 | S&F for 6mm thick, plywood grade BWP, type BB fixed with screws to timber frame work complete all as specified and directed. | 10 | Sqm | |
| 140 | 140 | S&F for 0.9mm thick, decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacture's instructions complete all as specified and directed. | 10 | Sqm | |
| 141 | 141 | S&F in repairs, 75mm stainless steel butt hinges, with mild steel hinge pin, bright polished and fixed, typeB-11 complete all as specified and directed. | 33 | Each | |
| 142 | 142 | S & F in repairs, continuous (piano) hinges (width of flap 30 mm) mild steel, bright finish or electrogalvanised. complete all as specified and directed. | 10 | RM | |
| 143 | 143 | S&F in repairs, Zebra venetian blinds of any colour or size as approved by Engr-in-Charge fixed to wall including all accessories complete all as specified and direcred. | 10 | Sqm | |
| 144 | 144 | S & F in repairs, gear operated type with bevel gear box and crank handle steel rolling shutters, thickness of laths 1.25mm with ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete all as specified and directed. | 15 | Sqm | |
| 145 | 145 | Taking down and refixing only the rolling shutters, area exceeding 10 sqm and n.exc 25 sqm including hood covers after cleaning the sides of the shutters, suspension rod, shaft and the guide channel, greasing all the moving parts, including gear box, strengthening the shafts of guide channel lath, curtain of shutters, locking device incuding welding, reballing and re-alignment of connected rod and selecting position the roller, ball bearing including replacement of worn and unserviceable parts (cost of new parts shall be paid under respective item of Sch 'A') including nuts and bolts complete all as specified and directed. | 5 | Each | |
| 146 | 146 | S&F in repairs, 1.25 mm thick laths in any type of rolling shutter and in any length complete all as specified and directed. | 60 | RM | |
| 147 | 147 | Supply only safety lever locks mild steel with 4 lever for rolling shutters complete all as specified and directed. | 20 | Each | |
| 148 | 148 | Supply only rollers and ball bearing of approved make. | 14 | Each | |
| 149 | 149 | Supply only mild steel helical wire spring 45cm long , suitable for rolling shutter,75 mm dia and weight of each spring not less than 3.00 kg complete all as specified and directed | 14 | Each | |
| 150 | 150 | Supply only steel gear box of full set required size and approved make. | 8 | Each | |
| 151 | 151 | M & L in repairs, 3.15mm thick MS lock plate with angle iron 35x35x5mm for rolling shutter( of width 3.00 to 3.50m) fitted with sliding bolt ,handle and pad lock complete all as specified and directed | 4 | Each | |
| 152 | 152 | M & L in repairs, 3.15mm thick, MS guide channel for rolling shutter of size 65mmx25mm, fitted on vertical wall with self closing steel pin at space 0.75mm alternate spacing complete all as specified and directed. | 12 | RM | |
| 153 | 153 | Taking down carefully copper / aluminium point wiring (light / fan socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc for taking credit including making good the disturbed surfaces to match with the existing all as specified and directed. | 48 | Per point | |
| 154 | 154 | Material & labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of sunk zinc coated pressed steel terminal box of 1.60mm thick with 3mm thick plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces to match the existing complete all as specified and directed for One light / bell / buzzer point controlled by one, one way switch 06 Amps. | 25 | Per point | |
| 155 | 155 | All as per srl item No 154 here-in-before but one fan point controlled by one, one way switch 06 Amps. | 5 | Per point | |
| 156 | 156 | All as per srl item No 154 here-in-before but one 3 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch. | 8 | Per point | |
| 157 | 157 | All as per srl item No 154 here-in-before but one 3 pin, 06 Amps socket outlet point on same board controlled by one, one way 06 Amps switch. | 5 | Per Point | |
| 158 | 158 | All as per Ser Item No 154 here-in-before but point wiring with 2.5 Sqmm single core FRLS cables and earth continuity wire of 1.5 Sqmm single core FRLS cable for one 3 pin 15 Amps socket out let point controlled by one, one way switch on independent board complete all as specified and directed. | 5 | Per point | |
| 159 | 159 | Supply & fixing for switch piano flush type, 06 Amps, single pole, one way, 250 volts complete all as specified and directed. Make : Havells / Anchor / SSK | 33 | Each | |
| 160 | 160 | Supply & fixing for bell push, flush type, 06 Amps, 250 volts with switch frame complete all as specified and directed. Make : Havells / Anchor / SSK | 10 | Each | |
| 161 | 161 | Supply & fixing for switch piano flush type, 16 Amps, single pole, one way, 250 volts with switch frame complete all as specified and directed. Make : Havells / Anchor / SSK | 5 | Each | |
| 162 | 162 | Supply & fixing for socket outlet 2 in 1, 5 pin, 06 Amps, flush type, 250 volts with socket frame complete all as specified and directed. Make : Havells / Anchor / SSK | 13 | Each | |
| 163 | 163 | Supply & fixing for socket outlet 2 in 1, 3 pin, 06 Amps and 3 pin, 16 Amps, flush type, 250 volts with socket frame complete all as specified and directed. Make : Havells / Anchor / SSK | 5 | Each | |
| 164 | 164 | Supply and fixing in repairs, ding dong bell, AC, 230 volts, single pole complete all as specified and directed. Make : SSK / Havells / Anchor / Cona | 10 | Each | |
| 165 | 165 | Supply and fixing for ceiling fan regulator, stepped type of 0 to 04 rotary steps, electronic, socket type, humfree, AC, 230 volts, 100 watts, duly ISI marked with and including white surround complete all as specified and directed. Make: - Havells / Anchor / SSK | 5 | Each | |
| 166 | 166 | Supply and Fixing in repairs, 10/12W LED T5 TL fitting (2' long) attractive, wall mounted type, suitable for mirror fittings, all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size, including taking down of existing u/s light fitting complete all as specified and directed. Make : Make : Havells / Philips / Bajaj /Halonix / C&S | 5 | Each | |
| 167 | 167 | Supply and fixing in repairs, wall / ceiling LED batten lighting fixture 20 watts LED 5700K (4' long), with extruded aluminium heat sink, integrated electronic driver and all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block, including taking down of existing u/s light fitting complete all as specified and directed. Make : Make : Havells / Philips / Bajaj /Halonix / C&S | 60 | Each | |
| 168 | 168 | Supply and fixing in repairs, wall energy saving, eco friendly LED bulk head fitting 9/10/12Watt, IP 54, surface mounted with ABS body & polycarbonate diffuser, etc and all accessories pre-wired including connecting up and including taking down of existing u/s light fitting complete all as directed. Make : Havells / Philips / Bajaj /Halonix / C&S | 2 | Each | |
| 169 | 169 | Supply and fixing for ceiling rose, 6 Amps, 250 volts, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25mm size complete all as specified & directed. Make : SSK / Acnhor / Havells | 70 | Each | |
| 170 | 170 | Material and labour for sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 04 Sqmm nominal cross sectional area, and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified and directed. | 20 | RM | |
| 171 | 171 | All as per srl item No 170 here-in-before but for 02x04 Sqmm for phase & neutral and 01x04 Sqmm for continuous earth wire. | 15 | RM | |
| 172 | 172 | Supply & fixing in repairs, industrial type SPN enclosure with a two pin and earth plug and socket complete with and including MCB, SP, AC, 240 volts of 20 Amps, 'C' curve 10 KA breaking capacity and flush to wall including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing complete all as specified and directed. Make: - Legrand / Havells / Anchor | 1 | Each | |
| 173 | 173 | Supply and fixing in repairs, sheet metal enclosure distribution board, single pole and neutral, AC, 240 volts, 08 way, with 200 Amps rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified and directed. Make :- Legrand / Havells / Standard | 2 | Each | |
| 174 | 174 | Supply and fixing in repairs, sheet metal enclosure distribution board triple pole and neutral (VTPN), AC, 440 volts, 04 ways with 200 Amps rated copper bus bar and metal door with IP 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified and directed and comprising of the following:- Make :- Legrand, Cat No. 6079 13 & 6078 14 or equivalent in Hager, Cat No : VYV04DM & VYV00E or Schneider, Cat No : A9HVD04L & A9HVDXXWB. (a) MCCB, 125 Amps, 04 pole, AC, 415 Volts of 16 KA breaking capacity complete - 01 No. Make :- Legrand, Model : DPX 160, Cat No. 4200 16 or equivalent in Hager, Cat No : HDA126Z or Schneider, Cat No : LV516312. (b) MCB, SP, AC, 240 volts of 06 to 32 Amps, \"C\" curve, 10 KA breaking capacity - 12 Nos. Make :- Legrand, Cat No. 4085 87 to 4085 95 or equivalent in Hager, Cat No. NCN106N to NCN132N or Schneider, Cat No. A9N1P06C to A9N1P32C. | 1 | Each | |
| 175 | 175 | Supply and fixing in repairs, MCB, SP, AC, 240 volts of 06 to 32 Amps capacity \"C\" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed. Make :- Legrand, Cat No. 4085 87 to 4085 95 or equivalent in Hager, Cat No : NCN106N to NCN132N or Schneider, Cat No : A9N1P06C to A9N1P32C. | 12 | Each | |
| 176 | 176 | Supply and fixing in repairs, MCB, DP, AC, 240 volts of 32 Amps capacity 'C' curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified and directed. Make :- Legrand / Havells / Standard | 2 | Each | |
| 177 | 177 | Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick burried vertically in ground (earth pit not less than 2.25meter deep below ground level) with top edge of the plate not less than 1.5meter below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia @ 75mm center to center both way with 12mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40mmx40mmx3mm frame for pit cover including testing on completion complete all as specified and directed. | 1 | Each | |
| 178 | 178 | Supply and fixing for ventilating fan, wall mounted type of 250 mm sweep, 240 volts, AC, 50 Hz capacity, cutting of hole in wall, making of wooden frame, all arrangements for mounting of fan including making good of disturbed surface etc complete all as specified and directed . Make : Havells / Bajaj / Crompton Greaves. | 2 | Each | |
| 179 | 179 | Supply & fixing in repairs, MCCB, 125 Amps, 04 pole, AC, 415 Volts of 16 KA breaking capacity complete all as specified and directed. Make :- Legrand, Model : DPX 160, Cat No. 4200 16 or equivalent in Hager, Cat No. HDA126Z or Schneider, Cat No.LV516312 | 1 | Each | |
| 180 | 180 | Supply and fixing for passing through pipe, 10 Sqmm, 2 core, 1100 Volts grade, heavy duty, multi-stranded, PVC insulated, aluminium conductor, served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed service cable for service connections from existing LT Panel/Pole to DB/busbar chamber including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified and directed. | 15 | RM | |
| 181 | 181 | Supply and fixing in repairs, energy saving security light fitting of 70 watts LED environmental friendly pressure die-cast aluminium IP 66 roadway luminaire with high power LED as light source comprising with electronic driver and all accessories pre-wired including connecting up with PVC insulated copper conductor cable 1.5 Sqmm, 3 core as required for connections and 40 mm bore light grade G. I. tube mounting bracket of 1.5 meter in length, bend to shape at 140 degree in ‘L’ shape and fixed to wall by means of 02 nos. of 40 x 5 mm flat iron clamps, nuts, bolts and washers etc complete all as specified and directed. Make : Make : Havells / Philips / Bajaj /Halonix / C&S | 2 | Each |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
