Addl/Alteration To Klp Of Eme Bn At Umroi Under Ge Umroi
Tender Value
1.10 Crore
Estimated cost
Bid Submission
19 Sep 2019
0 days left
EMD
1.85 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
UMROI → Meghalaya
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Addl / Alteration To Klp Of Eme Bn At Umroi Under Ge Umroi
BOQ
| Name of Work: ADDL/ALTERATION TO KLP OF EME BN AT UMROI UNDER GE UMROI | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons, walls etc, laid , bedded and pointed in any mortar and removing rubbish off the premises complete all as specified and directed. | 53 | X Sqm | |
| 2 | 2 | Demolition of unreinforced cement concrete of any description and in any position not otherwise specified and removing rubbish off the premises complete all as specified and as directed. | 63 | Cum | |
| 3 | 3 | M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust and brushing neat cement slurry with 3.0 kg of cement per square metre, complete all as specified and directed. | 1120 | Sqm | |
| 4 | 4 | M&L for 25mm thick PCC type B-0, 1:2:4 (12.5mm graded aggregate) as in levelling course, complete all as specified and as directed. | 890 | Sqm | |
| 5 | 5 | M&L for screed bed or bedding laying of cement mortar (1:4), 15 mm thick as in for floor finishes, complete all as specified and as directed. | 1390 | Sqm | |
| 6 | 6 | M&L for backing coat of cement mortar 1:4, 10 mm thick for as in vertical surfaces such as skirting , dados etc, complete all as specified and as directed. | 588 | Sqm | |
| 7 | 7 | M&L for joint free non-skid coloured ceramic tiles minimum 7 to 8 mm thick, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified\nNOTE : Screed bed shall be measured and paid separately. | 1140 | Sqm | |
| 8 | 8 | M&L for joint free non-skid coloured ceramic tiles minimum 7 to 8 mm thick, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified | 38 | Sqm | |
| 9 | 9 | M&L for joint free non-skid coloured ceramic tiles minimum 7 to 8 mm thick, area of each tile exceeding. 0.11 sqm but n exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified\nNOTE : Screed bed shall be measured and paid separately. | 230 | Sqm | |
| 10 | 10 | Supply & Fixing of glazed ceramic coloured /printed tiles 350x250x 7mm/ 450x350x7mm or any other similar size of equivalent area and thickness set and jointed in neat cement slurry and pointed in coloured cement to match on vertical surface of wall complete all as specified and as directed. \nNOTE : Backing coat shall be measured and paid separately. | 530 | Sqm | |
| 11 | 11 | M&L for screed bed or bedding laying of cement mortar (1:4) 20 mm thick for as in floor finishes, complete all as specified and as directed. | 620 | Sqm | |
| 12 | 12 | M&L for Machine cut kota stone slab flooring 18 to 20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing, complete all as specified and as directed.\nNOTE : Screed bed shall be measured and paid separately. | 620 | Sqm | |
| 13 | 13 | M&L for Machine cut kota stone in riser of steps 18 to 20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete, as specified and as directed.\nNOTE : Backing coat shall be measured and paid separately. | 20 | Sqm | |
| 14 | 14 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and directed. | 65 | RM | |
| 15 | 15 | Dismantling of plain/corrugated steel sheeting, any gauge or thickness including Nainital, Similar pattern roof covering, complete all as specified and directed. | 1020 | Sqm | |
| 16 | 16 | S&F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. | 935 | Sqm | |
| 17 | 17 | S&F Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. | 85 | Sqm | |
| 18 | 18 | Preparation of old painted steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed. | 510 | Sqm | |
| 19 | 19 | Material and labour for preparing old wooden surfaces of any description over 10 cm width or girth and applying a coat of synthetic enamel paint complete all as specified and as directed. | 590 | Sqm | |
| 20 | 20 | Taking down cement plaster on brick or stone walls, including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. | 2740 | Sqm | |
| 21 | 21 | M&L for 15mm thick rendering in CM (1:4) in two layers 10mm and 5mm and the top 5mm layer mixed with water proofing compound @ 3% by weight of cement in and finishing the surfaces fair and even without using extra cement complete all as specified and directed. \nNOTE : WPC shall be measured and paid separately. | 770 | Sqm | |
| 22 | 22 | M&L for Rendering 10mm thick on fair faces of brickwork or concrete surfaces in cement mortar (1:6) on concrete surface finished fair and even without using extra cement, complete all as specified and directed. | 1445 | Sqm | |
| 23 | 23 | M&L Rendering 5mm thick on fair faces of concrete surfaces in cement mortar (1:3) on concrete surface finished even and smooth without using extra cement, as in ceiling, complete all as specified and directed. | 525 | Sqm | |
| 24 | 24 | M&L for Preparing newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of alkali resistant primer over one coat of white cement based wall care putty (minimum 1.5mm thick), complete all as specified and as directed. | 1445 | Sqm | |
| 25 | 25 | M&L for Complete removal of existing treatment of plastered surfaces of wall, and applying one coat of white cement based wall care putty (minimum 1.5mm thick) and preparation of surface with alkali resistant priming paint and applying two coats of distemper oil emulsion, complete all as specified and as directed. | 2890 | Sqm | |
| 26 | 26 | M&L for Preparing newly plastered surfaces of walls and applying two coats of cement base complete all as specified and as directed. | 770 | Sqm | |
| 27 | 27 | M&L for Complete removal of existing treatment of plastered surfaces of wall, and applying two coats base paint complete all as specified and as directed. | 1540 | Sqm | |
| 28 | 28 | M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and as directed. | 525 | Sqm | |
| 29 | 29 | M&L for preparation of old plastered surfaces of ceiling and applying two coats of white wash, complete all as specified and as directed. | 955 | Sqm | |
| 30 | 30 | S&F in repairs Harrison rails 20mm dia, anodised aluminium alloy, fancy type, with brackets, stops, rollers etc.complete all as specified and as directed. | 280 | RM | |
| 31 | 31 | M&L for 75 mm thick Cement concrete type C 2, 1:3:6 (using 40 stone aggregate) in plinth protection, finished even and smooth without using extra cement, including provision of joints and filling the same with bitumen mastic complete all as specified and as directed. | 70 | Sqm | |
| 32 | 32 | M & L for PCC 1:3:6 type C2 ( using 40 mm graded crushed stone aggregate) as in surface channel and drains, complete all as specified and directed | 26 | Cum | |
| 33 | 33 | M&L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed. | 415 | RM | |
| 34 | 34 | All as per item no 42.00 above, Add or deduct for each 25mm girth or part thereof over or under 30cm .complete all as specified and directed. | 70 | RM | |
| 35 | 35 | Taking up or down steel tubing and connection 25 mm bore, including cleaning for re-fixing or removal to store, complete all as specified and as directed. | 50 | RM | |
| 36 | 36 | Supply & Fixing Tubes medium grade, 25mm bore galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed. | 38 | RM | |
| 37 | 37 | Fixing only tubes, 25mm bore galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed. | 12 | RM | |
| 38 | 38 | Cutting existing steel tubing 25mm bore for alterations or additions (each cut measured), complete all as specified and directed. | 9 | Each | |
| 39 | 39 | Screwing existing steel tubing 25mm bore for alterations or additions (or lengthening screw on pipe to form connector), complete all as specified and directed. | 4 | Each | |
| 40 | 40 | Taking up or down steel tubing and connection 20 mm bore, including cleaning for re-fixing or removal to store, complete all as specified and as directed. | 75 | RM | |
| 41 | 41 | Supply & Fixing Tubes medium grade, 20mm bore galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed. | 60 | RM | |
| 42 | 42 | Fixing only tubes, 20mm bore galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed. | 15 | RM | |
| 43 | 43 | Cutting existing steel tubing 20mm bore for alterations or additions (each cut measured), complete all as specified and directed. | 4 | Each | |
| 44 | 44 | Screwing existing steel tubing 20mm bore for alterations or additions (or lengthening screw on pipe to form connector), complete all as specified and directed. | 4 | Each | |
| 45 | 45 | Taking up or down steel tubing and connection 15 mm bore, including cleaning for re-fixing or removal to store, complete all as specified and as directed. | 225 | RM | |
| 46 | 46 | M&L for cutting chases not exceeding 10cm girth in concrete block walls for concealed water tubing, making good etc.complete all as specified and directed. | 225 | RM | |
| 47 | 47 | Supply & Fixing Tubes medium grade, 15mm bore galvanised with all fittings and fixed complete (concealed) to wall and ceiling or laid in floors Complete all as specified and directed. | 200 | RM | |
| 48 | 48 | Fixing only tubes, 15mm bore galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed. | 25 | RM | |
| 49 | 49 | Cutting existing steel tubing 15mm bore for alterations or additions (each cut measured), complete all as specified and directed. | 4 | Each | |
| 50 | 50 | Screwing existing steel tubing 15mm bore for alterations or additions (or lengthening screw on pipe to form connector), complete all as specified and directed. | 4 | Each | |
| 51 | 51 | Dismantling PVC water storage tanks of capacity exceeding 1000 litres but not exceeding 2000 litres and removing to stores, complete all as specified and as directed. | 5 | Each | |
| 52 | 52 | Supply & Fixing Rotational moulded polyethene water storage tanks 2000 litre capacity with lid (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I , complete all as directed by Engr-in- Charge | 5 | Each | |
| 53 | 53 | S&F 25 mm bore ball brass valve, high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule, complete all as specified and directed. | 5 | Each | |
| 54 | 54 | S&F 25 mm bore gun metal, glove or gate valves ISI marked with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed. | 5 | Each | |
| 55 | 55 | Taking down eaves gutters and rainwater pipes (any size or pattern ),including all fittings, heads, shoes, bends, swan necks etc. including cleaning or refixing or removal to store, complete all as specified and as directed | 200 | RM | |
| 56 | 56 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with clamps 110mm bore, complete all as specified and directed. | 130 | RM | |
| 57 | 57 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with clamps 75mm bore, complete all as specified and directed. | 70 | RM | |
| 58 | 58 | S&F PVC (SWR) bends any radius 110mm bore, complete all as specified and directed. | 25 | Each | |
| 59 | 59 | S&F PVC (SWR) bends any radius 75mm bore, complete all as specified and directed. | 25 | Each | |
| 60 | 60 | S&F PVC (SWR) single T equal or unequal with access door 110mm bore, complete all as specified and directed. | 8 | Each | |
| 61 | 61 | S&F PVC (SWR) single T equal or unequal with access door 75mm bore, complete all as specified and directed. | 6 | Each | |
| 62 | 62 | S&F PVC (SWR) vent cowl 110mm bore, complete all as specified and directed. | 13 | Each | |
| 63 | 63 | S&F PVC (SWR) vent cowl 75mm bore, complete all as specified and directed. | 13 | Each | |
| 64 | 64 | S&F PVC (SWR) floor trap 75mm bore, plain with grating including jointing with solvent cement complete all as specified and directed. | 6 | Each | |
| 65 | 65 | Taking down Chowkhats or frames n exc. 1.5 Sqm each with shutters (without taking off shutters from the frames), complete all as specified and directed. | 30 | Each | |
| 66 | 66 | S&F bands, straps, supports or stays for rainwater, large hasp and staple, chains, clamps, hold fasts, wall ties etc and small articles confirming to Fe290 Gde-E-165, complete all as specified and as directed. | 27 | Kg | |
| 67 | 67 | S&F Factory made solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed single side prelaminated PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prelaminated sheet, complete all as specified and directed. | 150 | RM | |
| 68 | 68 | S&F Factory made solid PVC moulded door shutter, with particle board core, 28 to 30mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face & 2mm prelaminated PVC sheet on back face, fixing in frame at site as per specification & drawing, complete all as specified and directed. | 38 | Sqm | |
| 69 | 69 | S&F Extruded aluminium alloy handles, fabricated type, anodised, 150mm, complete all as specified and directed. | 60 | Each | |
| 70 | 70 | Supply & Fixing 150 mm long aluminium anodised barrel tower bolt complete all as specified and as directed. | 60 | Each | |
| 71 | 71 | S & F Butt hinges 100mm long (type C 21) extruded aluminium alloy, complete all as specified and directed. | 90 | Each | |
| 72 | 72 | Supply & Fixing 15mm Bore bib tap cast copper alloy chromium plated fancy type with capstan heads, screw down screwed for iron pipe or for brass ferrule and fixed, in repair complete all as specified and as directed. | 21 | Each | |
| 73 | 73 | Supply & Fixing 15mm Bore pillar tap cast copper alloy chromium plated fancy type with capstan heads, screw down screwed for iron pipe or for brass funnel and fixed, in repair complete all as specified and as directed. | 12 | Each | |
| 74 | 74 | Supply & Fixing 15mm bore dia Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and as directed. | 10 | Each | |
| 75 | 75 | Supply & Fixing 15mm bore dia Angular stop valves concealed type, fancy type, cast copper alloy, screwed down, high pressure, with capstan head, screwed both ends for iron pipe or for unions and fixed in repair, complete all as specified and as directed. | 51 | Each | |
| 76 | 76 | S &F in repair 125mm chromium plated shower rose with swivel joint fix to iron pipe 15mm bore, complete all as specified and as directed. | 10 | Each | |
| 77 | 77 | Supply & Fixing in repairs brass chromium plated tubular towel rail , 20mm dia , 60cm long between flanges complete all as specified and as directed. | 15 | Each | |
| 78 | 78 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar, including all quoins, arches, pillars, etc. but excluding ashlar facing, dressed stonework and precast concrete articles, complete all as specified and directed. | 3 | Cum | |
| 79 | 79 | S&F PVC connection 15mm size with PTMT nuts of length 600mm, complete all as specified and as directed. | 51 | Each | |
| 80 | 80 | S&F in repairs vitreous china squating pan, Orissa pattern, size 580 x 440 mm white with integral foot rest with 'P' or 'S' trap (Excluding flushing cistern and flush pipe), complete all as specified and as directed. | 18 | Each | |
| 81 | 81 | Supply & Fixing in repairs 10 Litre capacity, PVC valves, syphonic action type, low level flushing cistern, white, with inlet ball valve, float and handle including brackets, complete all as specified and directed. | 18 | Each | |
| 82 | 82 | S & F in repair, Vitreous China Half stall urinal complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, fixing flush pipe, grating and union for discharge pipe, complete all as specified and directed. | 5 | Each | |
| 83 | 83 | Supply & Fixing in repairs Vitreous china wash hand basin size 550x400mm (flat back or angle back type) including 32mm dia brass chromium plated waste fitting a pair if cast iron bracket duly painted /erecting stand including cutting and pinning in ends making good disturbed surfaces in CM 1:3 including taking down unserviceable wash hand basin and connected items of any description, complete all as specified and as directed. | 12 | Each | |
| 84 | 84 | Supply & Fixing Brass chromium plated bottle traps 32mm for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed, complete all as specified and as directed. | 12 | Each | |
| 85 | 85 | Supply & Fixing 600x450mm bevelled edge mirror of selected quality glass 6mm thick, mounted on 6mm thick AC building board of commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers on wooden frame including polishing, complete all as specified and as directed. | 12 | Each | |
| 86 | 86 | Taking down of existing roof treatment from roof and Terrace, roughening surface of old concrete roof by picking, sweeping clean and washing down with water to remove dust, etc and applying roof treatment with the following specifications:- \n(a) Applying cement slurry over concrete surfaces @3kg/sqm. \n(b) Rendering 15mm thick in cement mortar (1:4) mixed with water proofing compound as per manufactures instruction on cleaned concrete surfaces of roof and finishing the surfaces fair and even including curing the plastered surfaces for 7 days by ponding of water over the roof, (levelling course).\n(c) Applying evenly one coat of cold bituminous primer conforming to [email protected] litre per square metre on the cleaned plastered surfaces\n(d) Applying evenly one coat of blown hot bitumen of grade 85/25@ 1.20 Kg per square metre on primed surfaces.\n(e) Applying a layer of APP based polymeric membrane, 3mm thick (minimum) weighing 3.50 Kg per square metre reinforced) with polyester non woven fabric weighing not less than 160 gms per square metre by torch application. The overlap shall not to be less than 100mm on transverse direction and 75mm on longitudinal direction and sealing overlaps.\n(f) Applying evenly one coat of aluminium paint @ 0.10 litre per square metre over the APP based polymeric membrane. | 620 | Sqm | |
| 87 | 87 | Materials and Labour for rendering 10 mm thick, cement plaster, in cement mortar (1:3) mixed with integral water proofing compound as per manufactures instructions on sides and top of RCC chajja including cutting and making good the existing surface to maintain proper slope complete all as specified and directed. | 50 | Sqm | |
| 88 | 88 | Demolition of unreinforced cement concrete in ground floors and pavings not exceeding 15cm thick (below or above ground level) and removing rubbish off the premises complete all as specified and as directed. | 6.96 | Cum | |
| 89 | 89 | M & L for hardcore of broken stone gauge not exceeding 63mm deposited spread and levelled in layers not exceeding 75cm thick water and rammed to true surfaces. | 10.44 | Cum | |
| 90 | 90 | M&L PCC type D-2 1:4:8 (40mm graded stone aggregate) 75mm thick as is sub base complete all as specified and directed. | 58 | Sqm | |
| 91 | 91 | M&L screed bed or bedding laying of cement mortar (1:4) 15 mm thick for as in floor finishes, complete all as specified and as directed. | 58 | Sqm | |
| 92 | 92 | M & L Machine compacted cement concrete tiles of size 25cm x 25cm x 25 mm thickness set jointed in neat cement slurry and pointed with grey cement and no pigment all as specified and as directed by Engr-in-Charge | 58 | Sqm | |
| 93 | 93 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.50 m in depth and getting out in soft/loose soil, complete all as specified and directed. | 106 | Cum | |
| 94 | 94 | M & L for PCC 1:3:6 type C - 2 in foundation, filling and mass concrete (using 40 mm graded crushed stone aggregate), complete all as specified and directed. | 4.5 | Cum | |
| 95 | 95 | Returning filling in spreading and levelling and well ramming in layers not exceeding 25cm thick including watering for filling under floor complete all as specified and as directed. | 112 | Cum | |
| 96 | 96 | M & L for formwork to faces of walls, retaining walls, abutments, parapets and similar work including attached pilasters, buttresses, etc; vertical or batter for fair finished surfaces, complete all as specified and directed. | 100 | Sqm | |
| 97 | 97 | Removing excavated material not exceeding 50 m and depositing where directed at al level not exceeding 1.50 m above the starting point all as directed | 59 | Cum | |
| 98 | 98 | Rendering 15 mm thick in CM 1:4 on stone masonry surfaces or surfaces other than fair faces of brickwork and finishing even & smooth without using extra cement, complete all as specified and directed. | 54 | Sqm | |
| 99 | 99 | Taking down carefully old unsv copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, sunken type box etc. and removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good to disturbed surfaces of walls, floors etc with its original specification complete all as specified and directed by Engr-in-Charge. | 612 | Per Point | |
| 100 | 100 | Taking down carefully MCB DBs SP/TP by unscrewing from main switch boards/cut out boxes and removing materials to store for keeping in safe custody for reuse at site or for taking credit including sealing the cable ends and making good disturbed surface of wall etc as per existing finishes complete all as specified and directed. | 21 | Each | |
| 101 | 101 | Material and labour for concealed point wiring for the followings with 1.5 Sqmm single core, PVC FRLS insulated unsheathed, multistranded copper conductor drawn through and including suitable size of PVC conduit pipe (medium grade) including necessary accessories like bends, tees, PVC square and elbow etc fixed on wall/ceiling with 1.5 Sqmm PVC FRLS insulated unsheathed multi stranded copper conductor cable as earth continuity (green in colour) connected to common earth dolly complete all as specified for One light/exhaust fan/fan point controlled by one, one way switch Note : Rate for cutting, chieseling and making good the existing surface for complete concealed wiring is deemed to be included in quoted rate. | 404 | Per Point | |
| 102 | 102 | All as per item No 101.00 above but for one 3 pin socket outlet 5 Amps, on independent board. | 115 | Per Point | |
| 103 | 103 | All as per item No 101.00 above but for one 3 pin socket outlet 5 Amps on same board alongwith other suitable switches. | 30 | Per Point | |
| 104 | 104 | All as per item No 101.00 above but one light point controlled by 02, two way switch, on independent board. | 5 | Per Point | |
| 105 | 105 | All as per item No 101.00 here-in-before but using 2.5 sqmm PVC FRLS insulated copper conductor wire for connecting 15A socket on independent board complete all as specified/directed. | 63 | Per Point | |
| 106 | 106 | Supply and fixing of modular switch, one way 6 amps, 1 module 240 Volts complete all as specified/directed. | 549 | Each | |
| 107 | 107 | Supply and fixing of modular switch two way 6 amps 1 module 240 Volts complete all as specified/directed. | 10 | Each | |
| 108 | 108 | Supply and fixing of modular socket outlet 2/3 pin 6 Amps 240 volts 2 module complete all as specified/ directed. | 145 | Each | |
| 109 | 109 | Supply & fixing of modular switch one way 16 Amps 1 module 240 Volts complete all as specified / directed. | 63 | Each | |
| 110 | 110 | Supply and fixing of modular socket 6/16 Amps, 6 pin combined, 2 module 240 volts complete all as specified and directed. | 63 | Each | |
| 111 | 111 | Supply & Fixing of modular type ceiling fan regulator step type ,2 module, 120 W complete all as specified and directed. | 55 | Each | |
| 112 | 112 | Supply and fixing lamp holder angular PVC/Polycarbonate suitable for batten fittings complete all as specified/directed. | 100 | Each | |
| 113 | 113 | Supply and fixing of ceiling rose 3 Phase PVC/Polycarbonate, 65x60 mm two to three terminal isolated body complete all as specified/directed. | 189 | Each | |
| 114 | 114 | Supply and fixing of modular metal flush box 1 module. | 10 | Each | |
| 115 | 115 | Supply and fixing of modular metal flush box 3 module. | 208 | Each | |
| 116 | 116 | Supply and fixing of modular metal flush box 4 module. | 20 | Each | |
| 117 | 117 | Supply and fixing of modular metal flush box 6 module. | 20 | Each | |
| 118 | 118 | Supply and fixing of modular metal flush box 8 module. | 30 | Each | |
| 119 | 119 | Supply and fixing of modular white cover plate with frame 1 module | 10 | Each | |
| 120 | 120 | Supply and fixing of modular white cover plate with frame 3 module | 208 | Each | |
| 121 | 121 | Supply and fixing of modular white cover plate with frame 4 module | 20 | Each | |
| 122 | 122 | Supply and fixing of modular white cover plate with frame 6 module | 20 | Each | |
| 123 | 123 | Supply and fixing of modular white cover plate with frame 8 module | 30 | Each | |
| 124 | 124 | Supply and fixing LED tubelight fitting 1x18/20 watts including Tube rod, 230 Volts, bipin holders connector block etc.complete with all accessories internally pre-wired and including provision of PVC round block 7.5cm dia and 2 cm in depth (2 Nos) for mounting the fittings and electrically connecting with three single core 23x0.0076 PVC insulated multistranded copper conductor flexible cable from ceiling rose to light fitting, complete all as specified and directed. | 230 | Each | |
| 125 | 125 | Supply and fixing in repair of MCCB TPN DB 4 way vertical type double door,IP-43 protection, isolated neutral bar, insulated busbar assembly, mechanical impact strength of IK08,suitable for MCCB's upto 125 Amps as incomer complete all as specified and directed by Engr-in-charge | 2 | Each | |
| 126 | 126 | Supply and fixing in repair of MCB TPN DB 4 way double door,IP-43 protection, isolated neutral bar, insulated busbar assembly, mechanical impact strength of IK08 complete all as specified and directed by Engr-in-charge. | 1 | Each | |
| 127 | 127 | Supply and fixing in repair of MCB SPN DB 8 way double door,IP-43 protection, isolated neutral bar, insulated busbar assembly, mechanical impact strength of IK08 complete all as specified and directed by Engr-in-charge. | 18 | Each | |
| 128 | 128 | S&F in repair MCCB,100 Amps 16kA, four pole, 415 volt adjustable all as specified and directed by Engineer-in- Charge. | 8 | Each | |
| 129 | 129 | Supply & fixing of MCB TPN 63 Amps 'C' Series 10 KA 415 volts complete all as specified/directed. | 4 | Each | |
| 130 | 130 | Supply & fixing of MCB SPN 32 Amps 'C' Series 10 KA 240 volts complete all as specified/directed. | 18 | Each | |
| 131 | 131 | Supply & fixing of MCB SP 6-32 Amps 'C' Series 10 KA, 240 volts complete all as specified/directed. | 108 | Each | |
| 132 | 132 | Material and labour for earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick, buried directly in ground (earth pit not less than 2.25 m below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanised wire of size 4 mm (upto 7.50m length)as earthing lead by means of nuts, bolts and washers of galvanised iron and earth lead protected by galvanised iron pipe 15 mm bore (light grade) and connected to earth test point and including cement concrete pit in PCC (1:3:6) type C-1(using 20 mm graded aggregate) and pre-cast RCC cover slab of size 540 x 540 x 50 mm thick, reinforced with 8 mm dia TMT bars both ways and one handle for lifting made with 10 mm dia mild steel bar, funnel, wire mesh 20 mm bore galvanised (light grade) for watering, charcoal and salt in alternate layers including necessary execution and earth works in any types of soil complete all as shown on Electrical plate No 3 of MES SSR-I including taking out the old earthing material complete all as specified and directed. | 21 | Each Job | |
| 133 | 133 | Material & labour for Sub main wiring with two runs of single core 6 Sqmm (Nominal Area) FRLS PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 volts grade drawn through and including PVC conduit (conceled) of adequate size (minimum 20mm) of wall/ceiling with all necessary fittings and accessories and 1 run of FRLS PVC insulated and unsheathed insulated single core cable with multi stranded copper conductor of size 6 Sqmm as earth wire (green in colour) run throughput conduit and connected to common earth dolly including taking out the old sub main wiring complete all as specified and directed.\nNote : (a) Two runs of cable, one run earth wire and one run PVC conduit will be measured as one length. (b) Rate shall be inclusive for necessary chasing and cutting and making good to match the existing surfaces. | 500 | RM | |
| 134 | 134 | Material & labour for Sub main wiring with two runs of single core 4 Sqmm (Nominal Area) FRLS PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 volts grade drawn through and including PVC conduit (conceled) of adequate size (minimum 20mm) fixed on surface of wall/ceiling with all necessary fittings and accessories and 1 run of FRLS PVC insulated and unsheathed insulated single core cable with multi stranded copper conductor of size 4 Sqmm as earth wire (green in colour) run through PVC conduit and connected common earth dolly including taking out the old sub main wiring complete all as specified and directed.\nNote : (a) Two runs of reinforce cable, one run earth wire and one run PVC conduit will be measured as one length. (b) Rate shall be inclusive for necessary chasing and cutting and making good to match the existing surfaces. | 385 | RM | |
| 135 | 135 | M&L for cutting of circular hole finishes with painting/distempering/whitewashing on any type of wall suitable size for fixing of exhaust fan of size 300mm sweep, grouting 04 Nos 100mm long 12mm dia stud bolt including, making good to disturbed surfaces of wall and with to match as per the existing colour complete all as directed and specified by engineer-in-charge. | 11 | Each Job | |
| 136 | 136 | Supply & fix exhaust fans PVC body AC single phase 230/ 240 V of size 300 mm sweep with louver | 11 | Each | |
| 137 | 137 | Supply and fix ON LOAD change over switch 415V in sheet metal enclosures 4 pole of capacity 63 Amps. | 4 | Each | |
| 138 | 138 | Supply and fixing of wall mounted LED batten with polycarbonate housing and integrated electronic driver of capacity 12 W.Make: Philips cat part No. 31403 12-Watt LED Picture Light (Gold) or equivalent to Havells/Bajaj/CG | 8 | Each | |
| 139 | 139 | Excavation in trenches in soft/disintegrated rocks soil exceeding 1.5 mtr deep but not exceeding 3 mtr for erection of poles all as specified and directed at site. | 1 | Cum | |
| 140 | 140 | M&L for sand cushioning to under ground cable using locally available fine clean dry river sand over, under ground UG cable laid in trenches and gently punning done complete all as directed by Engineer-in-Charge. Note : For the purpose of payment only punned thickness will be measured.\n | 35 | Cum | |
| 141 | 141 | Supply & laying un-reinforced precast concrete cable cover class LV, type-I, flat, size 250 mm x 150 mm x 40 mm complete all as specified & directed by Engineer-in-charge. | 2280 | Each | |
| 142 | 142 | M&L for Aluminium Conductor, Steel Reinforced of any size on LT Poles including straining, binding with insulators with aluminium binding wire with insulators as in OH conductors including, providing PVC Sleeves for jumper complete all as specified and as directed. | 3.94 | Per Qtl | |
| 143 | 143 | Supply & fix insulator pin type porcelain , vitreous , white ,brown or green 100 mm height and 65 mm dia including one galvanised mild steel spindle , two galvanised washers and one galvanised iron nuts for conductor working pressure 1100 Volts grade complete all as specified and directed. | 60 | Each | |
| 144 | 144 | Supply & fix insulator shackle type porcelain , vitreous , white ,brown or green 75 mm height and 90 mm dia including galvanised mild steel straps of size 31mm x 3mm, washers, insulator bolts, washers and nuts complete for conductor working pressure 1100 Volts grade complete as specified and directed. | 48 | Each | |
| 145 | 145 | Material and labour for earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick, buried directly in ground (earth pit not less than 2.25 m below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanised iron strip of size 32 x 6 RM (upto 7.50m length)as earthing lead by means of nuts, bolts and washers of galvanised iron and earth lead protected by galvanised iron pipe 40 mm bore (light grade) and connected to earth test point and including cement concrete pit in PCC (1:3:6) type C-1(using 20 mm graded aggregate) and pre-cast RCC cover slab of size 540 x 540 x 50 mm thick, reinforced with 8 mm dia TMT bars both ways and one handle for lifting made with 10 mm dia mild steel bar, funnel, wire mesh 20 mm bore galvanised (light grade) for watering, charcoal and salt in alternate layers including necessary execution and earth works in any types of soil complete all as shown on Electrical plate No 3 of MES SSR-I including taking out the old earthing material complete all as specified and directed. | 2 | Each Job | |
| 146 | 146 | M&L for earth continuity conductor 4mm dia galvanised iron or steel wire. | 0.5 | Per Qtl | |
| 147 | 147 | M&L for cross arms bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending in cold or hot , drilling holes for bolts , in any shape or size as indicated or directed and including painting with two coats of synthetic enamel paint over a coat of red oxide primer all as specified . | 1 | Qtl | |
| 148 | 148 | Dismantling steel tubular swaged pole 9 mtr long by breaking PCC and removing from site. | 2 | Each | |
| 149 | 149 | Dismantling cross arms of MS channel or angle sections etc and removing from site. | 1 | Qtl | |
| 150 | 150 | Dismantling insulators any type, any size and removing from site. | 108 | Each | |
| 151 | 151 | Dismantling galvanised earth wire from LT overhead line any size and removing from site. | 0.5 | Qtl | |
| 152 | 152 | Dismantling ACSR conductor from LT/HT overhead line any type & any size and removing from site. | 3.94 | Qtl | |
| 153 | 153 | Dismantling of stay assembly embedded in concrete including demolition of concrete, etc and removing unserviceable materials from site of work complete all as directed by Engr-in-charge. | 2 | Each | |
| 154 | 154 | Disconnecting and Taking down old service connections/UG cables any type/capacity in proposed route for new cable etc | 380 | RM | |
| 155 | 155 | M&L for stay assembly complete comprising of MS galvanised stay plate 230 mm x 230 mm x 6mm , MS galvanised stay rod 16 mm dia with nut, 215 M long , MS galvanised stay bow 40 cm long with 02 Nos galvanised thimbles with and including all fittings as shown in electrical plate No 1 of SSR Part-I (loop type insulator, stay clamps, excavation and concrete measured separately). | 2 | Per set | |
| 156 | 156 | S&F galvanised stay strand 7/3.15 mm for stay of poles complete . | 0.2 | Per Qtl | |
| 157 | 157 | M&L for loop porcelain ,vitreous white , brown or green insulator with over all dimension of 65 mm x 90 mm ,clearance of hole 16 mm complete . | 2 | Each | |
| 158 | 158 | Supply, transportation, fixing and erection of steel tubular swaged pole 9 mtr long complete with MS base plate ,finial taper plug nut bolts, screws as specified type 410 SP-31 as per relevant IS specification including two coats of aluminium paint over a coat of red oxide primer and including making alternate yellow and black strips 30 cm height (Total 5 Nos ) one complete all as specified and directed.(Excavation and PCC will be measured and paid separately.) | 2 | Each | |
| 159 | 159 | Supply, laying connecting and testing XLPE insulated, PVC sheathed, armoured LT electric power UG cable fo size 25 sqmm 4 core (heavy duty) with stranded aluminium conductor, 1100 Volts grade, laid through duct/pipe/ in trench etc. including cable glands and lugs complete all as specified and directed. NOTE: Excavation and earth work will be measured and paid separately.\n | 320 | RM | |
| 160 | 160 | Supply, laying connecting and testing XLPE insulated, PVC sheathed, armoured LT electric power UG cable fo size 10 sqmm 2 core (heavy duty) with stranded aluminium conductor, 1100 Volts grade, laid through duct/pipe/ in trench etc. including cable glands and lugs complete all as specified and directed. NOTE: Excavation and earth work will be measured and paid separately.\n | 60 | RM | |
| 161 | 161 | Taking down carefully defective street light luminaries of capacity of 70 Watt/150 Watts/250Watt from the LT poles by disconnecting electric supply and removing from site complete all as specified and directed by Engr in charge.\n | 20 | Each | |
| 162 | 162 | Supply and fixing 60 Watt capacity LED street light fittings in aluminium PDC housing, toughened glass cover, individual LEDs with secondary optics, covered with IP66 protection with inbuilt surge protection of minimum 5 KV including and repair/replacement warranty of minimum 3 years. Make: Surya SLE UL 60W IP66 LXN or its equivalent in Philips/Havells/Bajaj/CG | 20 | Each | |
| 163 | 163 | S&F for 40 mm dia GI tubing light grade bracket over all 1.2 mtr length with cutting as required and bend to shape with flat iron clamp of size 40 mm 2 Nos, suitable size of nut bolts and washers complete for fixing street light fittings on electric poles including taking down old unsv one complete all as specified and directed.Make:Surya/Jindal Steel/TATA. | 20 | Each job | |
| 164 | 164 | Supply and laying 3 layer ( inner antimicrobial, outer UV stabilized) ISI marked,IS-15801, PP-R pipes SDR 7.4 (PN-16) and including all PP-R plain fittings and laid/fixed or equivalent in Legrand/L&T/Siemens/ABB in trenches/walls/callings or laying in floors complete of size outer dia 32 mm including fittings complete all as specified. | 60 | RM | |
| 165 | 165 | Supply and laying 3 layer ( inner antimicrobial, outer UV stabilized) ISI marked,IS-15801, PP-R pipes SDR 7.4 (PN-16) and including all PP-R plain fittings and laid/fixed in trenches/walls/ceilings or laying in floors complete of size outer dia 25 mm including fittings complete all as specified. | 30 | RM | |
| 166 | 166 | Supply and fix PPR Gate Valves (Brass Insert) of size 32 mm bore | 4 | Each | |
| 167 | 167 | Supply and fix PPR Gate Valves (Brass Insert) of site of size 25 mm bore | 8 | Each | |
| 168 | 168 | S&F Rotational moulded polyethylene water storage tanks(cylindrical vertical with closed top) of capacity 500 Ltrs hoisted and fixed in position all as specified and directed. | 4 | Each | |
| 169 | 169 | Cutting/boring existing cast iron pipes /DI pipes/CI Pipe in position for insertion of new brass ferules/clamp etc for taking branch connection upto 25 mm dia complete.(Note : earth work, ferule/clamps, fittings required are deemed to be included in unit rate. | 2 | Each Job | |
| 170 | 170 | Supply, Installation testing and commissioning of Solar water heating system ,Flat plate collector type, with heat exchanger of 500 litre per day capacity, with electrical heating back up complete all as specified and directed by Engineer -in- Charge. Make:- V- GUARD/HAVELLS/SOLCHROME | 4 | Each |
AI Tender Summary
Tender Timeline
Aug 28, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedSep 19, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 21, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender