| 1 | 1 | Stripping off worn out plaster and raking out joints of walls, celings etc. up to any height and in any floor including removing rubbish with in a lead of 75 m as directed. | BI01010001010000000000000515BI0100001125 | 360 | Sqm |
|---|
| 2 | 2 | (I) Cement concrete with graded stone ballast (40 mm size) excluding shuttering.In ground floor.(B) With N.B variety stone metal.(a) 1:3:6 proportion. | BI01010001010000000000000515BI0100001126 | 19.5 | Cum |
|---|
| 3 | 3 | Plaster ( to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering conrners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (ground floor). [Excluding cost of chipping over concrete surface].(ii) With 1:4 cement mortar .(b) 15 mm. thick plaster. | BI01010001010000000000000515BI0100001127 | 600 | Sqm |
|---|
| 4 | 4 | Artificial stone in floor, dado, staircase etc. with cement conctrete (1:2:4) with stone chips laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works, using cement @ 1.75 kg./sq.m. all complete including all materials and labour In ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted) with ordinary cement. Using grey cement.(ii) 25 mm. thick. | BI01010001010000000000000515BI0100001128 | 111 | Sqm |
|---|
| 5 | 5 | Neat cement punning about 1.5mm thick in wall, dado, windowsill, floor etc.NOTE:Cement 0.152 cu.m per100 sq.m. | BI01010001010000000000000515BI0100001129 | 240 | Sqm |
|---|
| 6 | 6 | Supplying,Fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.(A) Floor With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20 Kg/Sq.m.(a) Area of each tile up to 0.09Sq.m.(i) Coloured decorative. | BI01010001010000000000000515BI0100001130 | 24.3 | Sqm |
|---|
| 7 | 7 | (B) Wall With Sand Cement Mortar(1:3)15mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m. & joint filling using white cement slurry @0.20kg/Sq.m.(a) Area of each tile upto 0.09Sq.m.Coloured decorative | BI01010001010000000000000515BI0100001131 | 84.82 | Sqm |
|---|
| 8 | 8 | Galvanized corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugaion minimum side lap. ( payment to be made on area of finished work). (GCI sheet to be supplied by contractor).In roof (a) with 0.60 mm.thick sheet. | BI01010001010000000000000515BI0100001132 | 174 | Sqm |
|---|
| 9 | 9 | Galvanised iron sheet ridging fitted with necessary bolt, screws, washers etc complete. (225 mm end lapping).(A) 300mm laping each way.(a) with 0.60 mm.thick sheet. | BI01010001010000000000000515BI0100001133 | 20 | M |
|---|
| 10 | 10 | Galvanized iron sheet eaves gutter fitted and fixed with necessary 50 mm X 6 mm.M.S.flat bar clamps bent to design, bolts. Nuts, washers etc. complete. Eaves gutter made of 0.63 mm. sheets.(300mm End lapping).225mm wide gutter | BI01010001010000000000000515BI0100001134 | 68 | M |
|---|
| 11 | 11 | (a) M.S. or W.I. ornamental grill of approved design joints continuously welded with M.S., W.I. flats and bars for windows ,railing etc. fitted and fixed with necessary screws and lugs in ground floor. (Add extra @1% for each addl. floor up to 4th floor and @1.25% for each addl. floor above 4th floor).(i) Grill weighing above 10 kg./sq.m.and up to 16kg/sq.m | BI01010001010000000000000515BI0100001135 | 7.2 | Qtl. |
|---|
| 12 | 12 | (ii) Grill weighing above 16 kg./sq.m.and above . | BI01010001010000000000000515BI0100001136 | 3.84 | Qtl. |
|---|
| 13 | 13 | Panel shutters of door and window, as per design (each panel consisting of single plank with out joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings.In ground floor.(In case of non-supply of single plank, panel rate of reduction of 20% will be made).(iii) 35mm.thick shutters with 19 mm. thick panel of size 30 to 45cm.champ | BI01010001010000000000000515BI0100001137 | 19.76 | Sqm |
|---|
| 14 | 14 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark.100mmx58mmx1.90mmm | BI01010001010000000000000515BI0100001138 | 36 | nos |
|---|
| 15 | 15 | (i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16 mm dia rod with centre bolt and round fitting.250mm long | BI01010001010000000000000515BI0100001139 | 12 | nos |
|---|
| 16 | 16 | Anodise aluminium barred/tower/socket bolt (full covered) of approved manufactured from extruded section conforming to I.S.204/74 fitted and Fixed with cadmium plated screws:.(v) 225mm long x 10mm dia. bolt. | BI01010001010000000000000515BI0100001140 | 16 | nos |
|---|
| 17 | 17 | 150mm longx10mmdia bolt | BI01010001010000000000000515BI0100001141 | 8 | nos |
|---|
| 18 | 18 | Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S.230/72) fitted and fixed complete:.(a) With continuous plate base (hexagonal/round rod).(iii) 150 mm grip x 12 mm dia rod . | BI01010001010000000000000515BI0100001142 | 24 | nos |
|---|
| 19 | 19 | Wood work in upper rails of railing , hand rail of staircase balcony etc. including necessary bend, moulding fitted and fixed complete ( for purpose of payment section will be measured in the square).champ. | BI01010001010000000000000515BI0100001143 | 0.45 | Cum |
|---|
| 20 | 20 | Ceiling with 12mm thick wooden planks fitted and fixed complete (excluding thesupporting framework) as per direction of the Engineer-in-charge.In Ground Floor champ | BI01010001010000000000000515BI0100001144 | 96 | Sqm |
|---|
| 21 | 21 | (b) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. | BI01010001010000000000000515BI0100001145 | 147 | Sqm |
|---|
| 22 | 22 | (a) Priming one coat on timber or plastered surface with synthetic enamel oil bound primer of approved quality including smoothening surfaces by sand papering etc. | BI01010001010000000000000515BI0100001146 | 156.06 | Sqm |
|---|
| 23 | 23 | (B) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand parpering etc. in cluding using of approved putty etc. on the surface , if necessary.(b) On Steel surface:1) With super gloss | BI01010001010000000000000515BI0100001147 | 372.06 | Sqm |
|---|
| 24 | 24 | (B) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand parpering etc. in cluding using of approved putty etc. on the surface , if necessary.(b) On Steel surface:1) With super gloss | BI01010001010000000000000515BI0100001148 | 147 | Sqm |
|---|
| 25 | 25 | Acrylic distemper to interior wall , ceiling with a coat of solvent based interior grade Acrylic primer (as per manufacturer's pecification) including cleaning and smoothing of surface.Two coats. | BI01010001010000000000000515BI0100001149 | 939.3 | Sqm |
|---|
| 26 | 26 | Protective and decorative Acrylic exterior emulsion paint of approved quality , as per manufacture specification as per direction of EIC to be apply over Acrylic primer as required. the rate included cost of material , labour scaffoldic and all incidential charges but excluding the cost of primer.In ground floor ( two coat).(a) Normal Acrylic emulaion. | BI01010001010000000000000515BI01000011150 | 512.2 | Sqm |
|---|
| 27 | 27 | Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete (In all floors for internal wall & upto 6m height for external wall ).3mm thick | BI01010001010000000000000515BI0100001151 | 75 | Sqm |
|---|
| 28 | 28 | Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. and cutting trenches in any soil through masoury concrete structures etc. if necessary and mending good damages including jointing with jointing materials (Spun yarn, valamoid / bitumen/M.seal etc) completeUPVC Pipes(iii) 160mmdia | BI01010001010000000000000515BI0100001152 | 54 | mtr |
|---|
| 29 | 29 | Bend 87.5degree 160mm dia | BI01010001010000000000000515BI0100001153 | 6 | nos |
|---|
| 30 | 30 | shoe 160mm dia | BI01010001010000000000000515BI0100001154 | 6 | nos |
|---|
| 31 | 31 | Plum Concrete work with 40 % Cement Concrete with 30 mm down graded stone metal and 60% stone boulder of size 150 mm and above, placed in position as directed excluding shuttering if any.(1:3:6) prpportion | BI01010001010000000000000515BI0100001155 | 99 | Cum |
|---|
| 32 | 32 | Hire and labour charge for shuttering with centreing and necessary staging up to 4 m. using approved stout props and thick hard wood planks of approved thick ness with required bracing for concrete slabs, beams, columns, lintels curved or staight including fitting fixing and striking out after complection of works. (up to roof of ground floor)(a) 25 mm. to 30 mm. thick wooden shuttering as per decision & direction of the Engineer-in-charge. .. | BI01010001010000000000000515BI0100001156 | 198 | Sqm |
|---|
| 33 | 33 | Supplying, fitting and fixing PVC pipes of approved make of of Schedule 80 (medium duty) conforming to ASTMD-1785 and threaded to match with GI Pi;es as per IS:1239 (Part-I) with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting piles, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accessories, specials. Payment for painting will be made seperately). For Exposed Work PVC Pipes.20mm | BI01010001010000000000000515BI0100001157 | 60 | Mtr |
|---|
| 34 | 34 | 25mm dia | BI01010001010000000000000515BI0100001158 | 20 | mtr |
|---|
| 35 | 35 | Supplying, fitting and fixing bib cock or stop cock.Chromium plated Bib Cock short body (Equivelent to Code No.511 & Model- Tropical /sumthing special of ESSCO or Similar brand). | BI01010001010000000000000515BI0100001159 | 8 | Nos |
|---|
| 36 | 36 | Chromium plated Stop Cock (Equivelent to Code No.513(A) & 513(B) Model- Tropical /sumthing special of ESSCO or Similar brand). | BI01010001010000000000000515BI0100001160 | 6 | Nos |
|---|
| 37 | 37 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. Specification with P.V.C. fittings complete, C.I. brackets including two coats of painting to bracket etc. | BI01010001010000000000000515BI0100001161 | 6 | each |
|---|
| 38 | 38 | Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. Brackets on 75 mm X 75mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30mm dia, approved quality P.V.C.waste pipe with C.P. nut 32mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P.nut including mending good all damages and painting the brackets with two coats of approved paint.550mmx400mm size | BI01010001010000000000000515BI0100001162 | 8 | Units |
|---|
| 39 | 39 | Supplying, fitting and fixing pedestal of approved make for wash basin.(White). | BI01010001010000000000000515BI0100001163 | 8 | each |
|---|
| 40 | 40 | Supplying, fitting & fixing Cast iron soil pipe only conforming to I.S.3989/1970 and I.S.1729/1964 with bobbins, nails etc. including making holes in the wall, floor etc. and cutting trenches etc. in any floor through masonry conctrete, if necessary, and mending good damges with necessary jointing materials and painting two coats to the exposed surface with approved paint complete. (Measurement will be made along the enter line of the total pipe line in fitted condition including specials, payment for specials & painting will however be paid seperately).With valamoid joint including sealing the top with cement mortar (4:1). Upto quarter depth.100mm dia | BI01010001010000000000000515BI0100001164 | 63 | Mtr |
|---|
| 41 | 41 | Supplying, fitting & fixing Cast iron single branch equal with door conforming to I.S.1729/1970 including joining and painting two coats to the exposed surface with approved paint complete.(Payment of Painting will however be paid seperately).100mm dia | BI01010001010000000000000515BI0100001165 | 12 | each |
|---|
| 42 | 42 | Supplying, fitting & fixisdng H.C.I. bend with door conforming to I.S.S. including jointing complete and painting two coats to klthe exposed surface kwith approved paint complete. (Payment of Painting will however be paid seperately).With valamoid joints including sealing the top with cement mortar (4:1).100mm dia | BI01010001010000000000000515BI0100001166 | 12 | each |
|---|
