| 1 | 1 | Earth work in excavation of foundation trenches or drains in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75m.as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete(a) Depth of excavation not exceeding 1.500 mm. | BI01010001010000000000000515BI0100001125 | 48.55 | CuM |
|---|
| 2 | 2 | Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. | BI01010001010000000000000515BI0100001126 | 130.5 | Sqm |
|---|
| 3 | 3 | (I) Cement concrete with graded stone ballast (40 mm size) excluding shuttering.In ground floor.(B) With N.B variety stone metal.(a) 1:3:6 proportion. | BI01010001010000000000000515BI0100001127 | 31.19 | CuM |
|---|
| 4 | 4 | Ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement, if any, in ground floor as per relevant codes.(ii) River bazree. | BI01010001010000000000000515BI0100001128 | 10.37 | CuM |
|---|
| 5 | 5 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at inter-section, complete as per drawing and direction.(a) For works in foundation, basement and upto roof of ground floor/upto 4m.(i) Tor steel/Mild steel.SAIL/ TATA/RINL | BI01010001010000000000000515BI0100001129 | 0.89545 | MT |
|---|
| 6 | 6 | Hire and labour charge for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams,columns, lintels curved or staight including fitting fixing and striking out after complection of works. (upto roof of ground floor).(a) 25 mm. to 30 mm. thick wooden shuttering as per decision & direction of the Engineer-in-charge. | BI01010001010000000000000515BI0100001130 | 128.153 | Sqm |
|---|
| 7 | 7 | Brick work with 1st class bricks in cement mortar (1:4).(a) In foundation and plinth. | BI01010001010000000000000515BI0100001131 | 9.95 | CuM |
|---|
| 8 | 8 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. | BI01010001010000000000000515BI0100001132 | 83.7 | Sqm |
|---|
| 9 | 9 | Earth work in filling in foundation trenches or plinth with good earth in layers not exceeding 150 mm. including watering and ramming etc.layer by layer complete .(payment to be made on the basis of measurement of finished quantity of work).(b) With earth obtained by fresh excavation (including cost of excavation upto 1,800 mm.depth)from land arranged by the Deptt, within a lead of 100 m. | BI01010001010000000000000515BI0100001133 | 33.26 | CuM |
|---|
| 10 | 10 | (A) Wood work in posts, post plates, rafters, battens, truss members, purlins etc. fitted and fixed complete (excluding the cost of bolts,paints but including the cost of nails, screw etc.) (The quantum should be corrected upto three decimals).sal local. | BI01010001010000000000000515BI0100001134 | 0.9 | CuM |
|---|
| 11 | 11 | Galvanized corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugaion minimum side lap. ( payment to be made on area of finished work). (GCI sheet to be supplied by contractor). (i) in Roof: (a) with 0.63mm.thick sheet. | BI01010001010000000000000515BI0100001135 | 11.4 | Sqm |
|---|
| 12 | 12 | Galvanised iron sheet ridging fitted with necessary bolt, screws, washers etc complete. (225mm end lapping).(A) 300mm laping each way.0.63mm.thick sheet. | BI01010001010000000000000515BI0100001136 | 45.6 | Mtr. |
|---|
| 13 | 13 | Galvanized iron sheet eaves gutter fitted and fixed with necessary 50 mm X 6mm.M.S.flat bar clamps bent to design, bolts. Nuts, washers etc. complete. Eaves gutter made of 0.63 mm. sheets.(300mm End lapping)(b) 300 mm.wide gutter.. | BI01010001010000000000000515BI0100001137 | 28.8 | Mtr. |
|---|
| 14 | 14 | Wooden eaves board as per design, fitted and fixed complete:in ground floor.(ii) Ornamental eaves board (ordinary teak).(b) 25 mm. thick | BI01010001010000000000000515BI0100001138 | 7.2 | Sqm |
|---|
| 15 | 15 | Providing and fixing of falls ceiling eith powder coated exposed G.I. grid suspension system ( E-grid U-1520 or equivalent load carying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200mm c/c)consisting of main runner 3600mm long, cross tee 1200mm / 600mm long and wall angle . the wall angle shall be fixed of PVC dash fasteners on the perimeter of the wall by steel screw with distance 300mm c/c. the main runner to the placed @ 1200mm. the cross tea 1200mm will be inserted in the pre-cut slots of main runner at regular interval of 600mm to form a modular grid of 1200mm x 600mm. Additional cross tees 600mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600 mm x 600 mm. Grid of module size 600 mm x 600 mm shall be supported by 6mm dia G.I. wire from purlins/ soffit. 15mm thick OW Acoustic Board (mineral bibre Acoustic ceiling tiles) of approved pattern and size 595mm x 595mm with NRC value > 0.65 should be placed in the grid moduled to form a false ceiling. All complete as per the drawing & direction of engineering- in- charge.a) Acoustic false ceiling(with 15mm thick OW Acoustic board and E-grid U-1520).In ground floor. | BI01010001010000000000000515BI01000011139 | 16.38 | Sqm |
|---|
| 16 | 16 | Collapsible gate with 40 mm.X 40mm x 6 mm.Tee as top and bottom guide rail, 20 mm,X10 mm,X2 mm. vertical channels 100 mm. apart in fully stretched position 20 mm. X5 mm.M.S. flats as collapsible bracing properly rivetted and washered including 38 mm. steel rollers including locking arrangement, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls , floors etc. and making good damages complete. (Add extra @1% for each addl. floor upto 5th floor and @1.25% for each addl. floor above 5th floor.)In ground floor. | BI01010001010000000000000515BI0100001140 | 8.82 | Sqm |
|---|
| 17 | 17 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame excluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be corrected upto three decimals).( c) Sal : Siliguri. | BI01010001010000000000000515BI0100001141 | 0.172 | CuM |
|---|
| 18 | 18 | supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar , end bifurcated with necessary screws etc. by cement concrete (1:2:4) as per direction . ( cost of concrete will be paid separately).(a) 40mm x 6mm, 250mm Length . | BI01010001010000000000000515BI0100001142 | 14 | Nos |
|---|
| 19 | 19 | Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings.In ground floor.(In case of non-supply of single plank, panel rate of reduction of 20% will be made).ii) 40 mm.thick shutters with 19 mm. thick panel of size 30 to 45cm.champ. | BI01010001010000000000000515BI0100001143 | 5.6 | Sqm |
|---|
| 20 | 20 | Glazed shutters of doors, window, fan light, clerestory windows etc. as per design (with ordinary glass of 7.4 kg./sq.m.,3 mm. thick) fitted with putty bed and teak wood bead and nails including fitting and fixing shutter in position but excluding the cost of hinges and other fittings , cost of glass , putty, wooden beads etc which will be paid separately.in ground floor.(ii) 35 mm. thick shutters.champ | BI01010001010000000000000515BI0100001144 | 0.66 | Sqm |
|---|
| 21 | 21 | Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete (In all floors for internal wall & upto 6m height for external wall ).(i) 3 mm. thick (weighing 7.4 kg/sq.m.). | BI01010001010000000000000515BI0100001145 | 0.63 | Sqm |
|---|
| 22 | 22 | Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S.205/66) and fitted and fixed with cadmium plated screws:.vii) 100 x 75 x4.0 mm. | BI01010001010000000000000515BI0100001146 | 18 | Nos |
|---|
| 23 | 23 | Anodise aluminium barred/tower/socket bolt (full covered) of approved manufactured from extruded section conforming to I.S.204/74 fitted and Fixed with cadmium plated screws:.(v) 200 mm long x 10mm dia. bolt. | BI01010001010000000000000515BI0100001147 | 8 | Nos |
|---|
| 24 | 24 | Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S.230/72) fitted and fixed complete:.(a) With continuous plate base (hexagonal/round rod).(vi) 150 mm grip x 10 mm dia rod. | BI01010001010000000000000515BI0100001148 | 8 | Nos |
|---|
| 25 | 25 | Anodise aluminium Aldrop/Sliding bolts of approved quality manufactured form extruded section conforming to I.S. specifictation (I.S.2681/66) fitted and fixed complete.(ii) 250 mm x 19 mm dia. bolt. | BI01010001010000000000000515BI0100001149 | 4 | Nos |
|---|
| 26 | 26 | Plaster ( to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering conrners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (ground floor).[Excluding cost of chipping over concrete surface(ii) With 1:4 cement mortar .(a) 10 mm.thick plaster. | BI01010001010000000000000515BI0100001150 | 25.11 | Sqm |
|---|
| 27 | 27 | (ii) With 1:4 cement mortar,20mm thick | BI01010001010000000000000515BI0100001151 | 207 | Sqm |
|---|
| 28 | 28 | (ii) With 1:4 cement mortar,15mm thick | BI01010001010000000000000515BI0100001152 | 105.6 | Sqm |
|---|
| 29 | 29 | Neat cement punning about 1.5 mm. thick in wall, dado, window, sills, floor, drain etc.NOTE:- Cement 0.152 cu.m. per 100 sq.m. | BI01010001010000000000000515BI0100001153 | 75.24 | Sqm |
|---|
| 30 | 30 | 18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick (Avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigment matching of stone shade, including grinding and polishing as per direction of Engineer-in-charge to match with the existing work.[slurry for bidding @ 4.4kg/sq.m and pointing @ 2.0 kg/sq.m]. | BI01010001010000000000000515BI0100001154 | 35.58 | Sqm |
|---|
| 31 | 31 | Supplying, fitting, fixing 18 mm. to 22 mm. thick kota stone in wall,dado in 15 mm thick [avg] cement mortar (1:3) including making suitable arrangements to hold the stones properly by brass/copper hooks including pointing in cement mortar (1:2) (1 cement,2 stone dust) with admixture of pigments matching the stone shade, including grinding and polishing all complete as per direction of Engineer-in-charge including cost of materials, labour, scaffolding staging, curing complete. [Using cement slurry for bedding @ 4.4 kg/Sqm and for jointing @ 1.8 kg/Sq.m] | BI01010001010000000000000515BI0100001155 | 3.42 | Sqm |
|---|
| 32 | 32 | Supplying,Fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.(A) FloorWith Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20 Kg/Sq.m.(a) Area of each tile upto 0.09Sq.m.ii) Other than Coloured decorative including white. | BI01010001010000000000000515BI0100001156 | 65.1 | Sqm |
|---|
| 33 | 33 | (b) Priming one coat on timber or plastered surface with synthetic enamel oil bound primer of approved quality including smoothening surfaces by sand papering etc. | BI01010001010000000000000515BI0100001157 | 21.56 | Sqm |
|---|
| 34 | 34 | steel surface | BI01010001010000000000000515BI0100001158 | 20.41 | Sqm |
|---|
| 35 | 35 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand parpering etc. in cluding using of approved putty etc. on the surface , if necessary.(a) On timber or plastered surface: (1) With super gloss (hi-gloss). (ii) Two coats ( white in shade ). | BI01010001010000000000000515BI0100001159 | 21.56 | Sqm |
|---|
| 36 | 36 | steel surface | BI01010001010000000000000515BI0100001160 | 20.41 | Sqm |
|---|
| 37 | 37 | Rendering the Surface of walls and ceiling with White Cement baseWATER PROOF wall putty of approved make & brand.(1.5 mm thick) | BI01010001010000000000000515BI0100001161 | 238.95 | Sqm |
|---|
| 38 | 38 | Applying interior grade acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to received distemper /Acrylic emulsion paint including scraping and preparing the surface thoroughly , complete as per manufactured specification and as per directions of the EIC.In ground floor.(i) water based interior grade Acrylic primer.two coats | BI01010001010000000000000515BI0100001162 | 122.31 | Sqm |
|---|
| 39 | 39 | Applying exterior grade Acrylic primer of approved quality and brand on plaster or concrete surface old or new surface to receive decorative textured (mat finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly complete as per manufacturer's specification and as per direction of the EIC. In Ground Floor:.2 coats | BI01010001010000000000000515BI0100001163 | 116.64 | Sqm |
|---|
| 40 | 40 | Acrylic Distemper to interior wall, ceiling with a coat of solvent basedinterior grade acrylic primer (as per manufacturer's specification)including cleaning and smoothning of surface.Two Coats | BI01010001010000000000000515BI0100001164 | 122.31 | Sqm |
|---|
| 41 | 41 | Protective and decorative Acrylic exterior emulsion paint of approved quality , as per manufacture specification as per direction of EIC to be apply over Acrylic primer as required. the rate included cost of material , labour scaffoldic and all incidential charges but excluding the cost of primer.In ground floor ( two coat).(a) Normal Acrylic emulaion. | BI01010001010000000000000515BI0100001165 | 116.64 | Sqm |
|---|
| 42 | 42 | Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc.complete in all respect including cost of necessary fitting as required, jointing materials and two coats of painting with approved paint in any position above ground.( Payment will be made on the center line measurements of total pipe line including all specials. No seperate payment will be made for accesorie, specials.).For exposed work.20 mm dia.medium quality. | BI01010001010000000000000515BI0100001166 | 750 | Mtr. |
|---|
| 43 | 43 | 15 mm dia.medium quality. | BI01010001010000000000000515BI0100001167 | 42 | Mtr. |
|---|
| 44 | 44 | Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg sq.cm. (for water lines only).15mm dia | BI01010001010000000000000515BI0100001168 | 2 | Nos |
|---|
| 45 | 45 | 20mm dia | BI01010001010000000000000515BI0100001169 | 2 | Nos |
|---|
| 46 | 46 | Supplying PVC water storage tank of approved quality with closed top weith lid (Black) - Multilaye1000 litres | BI01010001010000000000000515BI0100001170 | 1 | Nos |
|---|
| 47 | 47 | Labour for hoisting plastic water storage tank. Upto 1500 litre capacity. | BI01010001010000000000000515BI0100001171 | 1 | Nos |
|---|
| 48 | 48 | Supplying, fitting and fixing bib cock or stop cock.Chromium plated Bib Cock long body with wall flange with aerator (Equivelent to Code No.512 & Model- Tropical /sumthing special of ESSCO or Similar brand). | BI01010001010000000000000515BI0100001172 | 4 | Nos |
|---|
| 49 | 49 | Chromium plated Concealed Stop Cock (Equivelent to Code No.514(A) & Model- Tropical /sumthing special of ESSCO or Similar brand). | BI01010001010000000000000515BI0100001173 | 4 | Nos |
|---|
| 50 | 50 | Supplying, fitting and fixing Shallow water closet Indin pattern (I.P.W.C) of approved make in white vitreous chinaware in position (excluding cost of concrete for fixing).580 mm long. | BI01010001010000000000000515BI0100001174 | 2 | Nos |
|---|
| 51 | 51 | Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. Brackets on 75 mm X 75mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30mm dia, approved quality P.V.C.waste pipe with C.P. nut 32mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P.nut including mending good all damages and painting the brackets with two coats of approved paint.550mm x 400mm size | BI01010001010000000000000515BI0100001175 | 2 | Nos |
|---|
| 52 | 52 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. Specification with P.V.C. fittings complete, C.I. brackets including two coats of painting to bracket etc. | BI01010001010000000000000515BI0100001176 | 2 | Nos |
|---|
| 53 | 53 | Supplying, fitting & fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P.nut, 15mm dia. | BI01010001010000000000000515BI0100001177 | 4 | Nos |
|---|
| 54 | 54 | supplying, fitting and fixing approved brand 32mm dia P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps.1050mm long | BI01010001010000000000000515BI0100001178 | 2 | Nos |
|---|
| 55 | 55 | Supplying, fitting and fixing Flat back urinal (half stall urinals) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete.635mmx395mmx470mm | BI01010001010000000000000515BI0100001179 | 1 | Nos |
|---|
| 56 | 56 | Supplying, figging and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete(6:3:1) with jhama chips complete.(Payment of concrete will be paid seperately).450mmx350mm | BI01010001010000000000000515BI0100001180 | 1 | Nos |
|---|
| 57 | 57 | Supplying, fitting and fixing urinals flush pipe fittings of approved brand.C.P. urinals flush pipe fiitngs range of two. | BI01010001010000000000000515BI0100001181 | 1 | Nos |
|---|
| 58 | 58 | Supplying, fitting and fixing cast iron extension pipes for using in Traps only (connector) conforming to I.S.3989/1970 and 1729/1964 including lead caulked joints complete and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid seperately.100mmx600mm | BI01010001010000000000000515BI0100001182 | 2 | Nos |
|---|
| 59 | 59 | Supplying, fitting & fixing Cast iron soil pipe only conforming to I.S.3989/1970 and I.S.1729/1964 with bobbins, nails etc. including making holes in the wall, floor etc. and cutting trenches etc. in any floor through masonry conctrete, if necessary, and mending good damges with necessary jointing materials and painting two coats to the exposed surface with approved paint complete. (Measurement will be made along the enter line of the total pipe line in fitted condition including specials, payment for specials & painting will however be paid seperately).With valamoid joint including sealing the top with cement mortar (4:1). Upto quarter depth.100mm dia. | BI01010001010000000000000515BI0100001183 | 17 | mtr. |
|---|
| 60 | 60 | Supplying, fitting & fixisdng H.C.I. bend with door conforming to I.S.S. including jointing complete and painting two coats to klthe exposed surface kwith approved paint complete. (Payment of Painting will however be paid seperately).With valamoid joints including sealing the top with cement mortar (4:1).100mm dia | BI01010001010000000000000515BI0100001184 | 6 | Nos |
|---|
| 61 | 61 | Supplying, fitting & fixing approved patent vent cowl I.C.I. conforming to I.S.S. and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid seperately.).100mm dia | BI01010001010000000000000515BI0100001185 | 2 | Nos |
|---|
| 62 | 62 | Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm(depth) with 250 mm thick 1st. class brick work in cement mortar(4:1) on all sides, bottom of the pit consisting of 100 mm thick cement concrete(1:6:3) with stone chips over a layer of jhama brick flat soiling, 15 mm thick (1:4) cement plaster to inside walls and outside walls upto G.L. and 20 mm thick(1:4) plaster to bottom of the pit, providing necessary invert with cement concrete(1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster(1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials.With Bazree (N.B.Variety).(SAIL/TATA/RINL) | BI01010001010000000000000515BI0100001186 | 3 | Nos |
|---|
| 63 | 63 | Construction of Septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (4:1) including two 560 mm dia. R.C.C. manhloe cover of approved make supplied, fitted and fixied in the top slab with necessary fittings, 19 mm thick cement plaster(4:1) with neat cement finish to the internal surfaces and 12 mm thick plaster(4:1) to outside wall upto 200 mm below G.L. floor finished with 25 mm thick grey artificial stone including supplying, fitting and fixing all necessary specials, fittings, S.W. tees, C.I. foot rest etc. including excavating earth in all sorts of soil, shoring, bailing and pumping out water as necessary, ramming, dressing the bed and refilling the sides of the tank with earth, removing spoils, fliing up the chamber with clear water, removing foreign materialsfrom the chamber and including constructing attached inspection pit as per approved dawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 5% by weight of cement, complete in all respect as per directon of Engineer-in-Charge.For 10 users. | BI01010001010000000000000515BI0100001187 | 1 | Nos |
|---|
| 64 | 64 | Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work(6:1) band all round and cement brick work(6:1) upto 0.90 metre from top with 19 mm thick cement plastering(4:1) to inside face upto the depth of cement brick work, 12 mm thick cement plaster(4:1) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal(50 mm to 63 mm size) including R.C.C. cover slab of designed thickness with cement concrete(4:2:1) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making necessary arrangements for pipe conections, excavation of well including shoring, dewatering and remeving the excess earth from the premisis as per direction complete in all respect with all costs of labour and materials.With 250 mm thick dry brick work and 250 mm thick cement brick work(6:1) and 1.00 m. inside dia. | BI01010001010000000000000515BI0100001188 | 1 | Nos |
|---|
| 65 | 65 | Earth work in excavation of foundation trenches or drains in all sorts of soil (including mixed soil but excluding laterite or sand stone) including removing, spreading or stacking the spoils within a lead of 75m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.(a) Depth of excavation not exceeding 1.500 mm. | BI01010001010000000000000515BI0100001189 | 10.44 | CuM |
|---|
| 66 | 66 | Rubble masonry in cement (1:4) with hard dressed stones from approved quarries and clean, coarse and washed sand including carriage of all materials to siteIn Fine dressed work in BuildingIn Ground Floor | BI01010001010000000000000515BI0100001190 | 48 | CuM |
|---|
| 67 | 67 | (I) Cement concrete with graded stone ballast (40 mm size) excluding shuttering.In ground floor.(B) With N.B variety stone metal.(a) 1:3:6 proportion. | BI01010001010000000000000515BI0100001191 | 1.62 | CuM |
|---|
| 68 | 68 | Supplying, fitting and fixing Stainless Steel railing consist of 38mmdia and 900mm height vertical balustrade at every two alternativesteps, 50mm dia top rail, 3 (three) nos 19mm dia horizontalStrainless steel pipe and base/cover plate with Strainless SteelGRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Matfinish, complete as per direction of the Engineer-in-charge.Weight of Strainless Steel railing per metre 6.5 Kg (approx) | BI01010001010000000000000515BI0100001192 | 120 | mtr. |
|---|
| 69 | 69 | Supplying, fitting & fixing granite slabs 15mm to 18 mm. thick withuniform texture & without decorative veins in columns, wall, facia etc.with 15 mm thick [avg] cement mortar (1:2) including making suitablearrangements to hold the stones properly by brass / copper hooksincluding pointing in cement mortar (1:2) (1 white cement : 2 marbledust) with admixture of pigment matching the stone shades all completeas per direction of the Engineer-in-charge including cost of all materials,labours, scaffolding, staging, curing and roughening of concrete surfacecomplete. Area of eachGranite slab = 0.6 square metre.[Using cement slurry at back side of granite @ 4.4 kg/sq.m &white cement slurry for joint filling @ 1.8 kg/sq.m] | BI01010001010000000000000515BI0100001193 | 35 | Sqm |
|---|
| 70 | 70 | Preparation of beds for hedging and shrubbery by excavating 60cm deep and trenching the excavated base to a further depth of 30cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 ( 8 parts of stacked volume of earth after reduction by 20%, one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary watering and finally fine dressing, levelling etc., including stacking and disposal of materials declared unserviceable and surplus earth by spreading and levelling as directed, within a lead of 50m lift upto 1.5m complete. This includes supply of labour,tools & plants including materials.Planting hedge plants in two rows at 30cm apart | BI01010001010000000000000515BI0100001194 | 765 | Sqm |
|---|
| 71 | 71 | Supplying and stacking sludge (adequate for Horticulture work) at site in dry cake from approved disposal work site including royalty, all lead and lift etc. (Sludge measured in stack will be reduced by 8%). | BI01010001010000000000000515BI0100001195 | 220 | Sqm |
|---|
| 72 | 72 | Spreading of sludge, dump manure,/farmyard manure/animel dung manure and good earth in required thickness. This includes supply of labour, tools & plants excluding materials. | BI01010001010000000000000515BI0100001196 | 1638 | Sqm |
|---|
| 73 | 73 | Supplying and fixing grasses tiles of grass Maxican Carpet/Selection No. 1 Healthy & fresh grasses (size 1'x1' or bigger) including watering and maintenance of the lawn for 30days or more till the grass forms a thick lawn free from wees and fit for mowing including supplying good earth as required by Engineer-in-charge. (Rate includes supply of labour, tools & plants including materials) | BI01010001010000000000000515BI0100001197 | 1550 | Sqm |
|---|
| 74 | 74 | Supplying and Planting of different plant /trees ( Supplying well grown plants bushy and healthy, minimum height as specified i.e.exposed height including all leads & lift,carriage, handling, manuring, applying presticide and fertilizer etc.i) Furcaria veriegated 10-12 leaves in height 20-30cm in earthen pots of size 25cm. | BI01010001010000000000000515BI0100001198 | 200 | Nos |
|---|
| 75 | 75 | Supplying and Planting of different plant /trees ( Supplying well grown plants bushy and healthy, minimum height as specified i.e.exposed height including all leads & lift,carriage, handling, manuring, applying presticide and fertilizer etc.iv) Rangon hi-breed healthy plant. | BI01010001010000000000000515BI0100001199 | 400 | Nos |
|---|
| 76 | 76 | vi) Duranta healthy plant of big size | BI01010001010000000000000515BI0100001200 | 500 | Nos |
|---|
| 77 | 77 | xi) Ficus elastica Decora ( Rubber plant ) ofheight 90cm-60cm in each earthen pot ofsize 25cm. | BI01010001010000000000000515BI0100001201 | 150 | Nos |
|---|
| 78 | 78 | xix) Bougainvillea (name variety, bushy plants, full bloom) of height 90cm-60cm incement pots of size 30cm. | BI01010001010000000000000515BI0100001202 | 150 | Nos |
|---|
| 79 | 79 | iv) Acalypha species ( Red/Green) of height 30cm-90cm in earthen pots of size 25cm. | BI01010001010000000000000515BI0100001203 | 150 | Nos |
|---|
| 80 | 80 | xxi) Croton different varieties of height 30 cm to 90 cm in earthen pots of size 25cm. | BI01010001010000000000000515BI0100001204 | 100 | Nos |
|---|
| 81 | 81 | Planting of trees ( Avenue plants) in 0.60m dia holea, 1m deep dug in the ground, mixingthe soil with decayed farm yard/sludge manure. This includes supply of labour, tools& plants including materials but excluding cost of tree. | BI01010001010000000000000515BI0100001205 | 50 | Nos |
|---|
