Construction Of S . H . B And Allied Civil Works At 220 Kv S/S Lalru
Tender Value
Ref. Documents
Estimated cost
Bid Submission
09 Sep 2019
0 days left
EMD
62200
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lalru → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of S . H . B And Allied Civil Works At 220 Kv S / S Lalru
BOQ
| Name of Work: | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonary in 15 cm layers with compaction including disposal of all surplus soil as directed with in lead of 30 metres | item1 | 195.103 | cum |
| 2 | 2 | Earthwork in filling (exclusive of compensation for earth) in excavation in ordinary soil or soil containing gravel or kankar upto 40% and filling in 15 cm layer in foundatio and plinth including ramming, watering and consolidating under floors with earth brought from a distance not exceeding 30 metres | item2 | 187.93 | cum |
| 3 | 3 | Dismantling brickwork or tile masonary or tile lining In cement | item3 | 244.678 | cum |
| 4 | 4 | Dismantling concrete or precast concrete\nCement concrete plain 1:2:4 | item4 | 3.65 | cum |
| 5 | 5 | Dismantling concrete or precast concrete\nReinforced cement concrete | item5 | 112.15 | cum |
| 6 | 6 | Dismantling cement conglomerate floors (25mm to 50mm) thick including concrete base. \n | item6 | 330.07 | sqm |
| 7 | 7 | Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. \nDoors of area 3 sqm and below. | item7 | 11 | Nos |
| 8 | 8 | Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. \nWindows of area 3 sqm and below | item8 | 32 | Nos |
| 9 | 9 | Scraping\nBricks dismantled from brick work in lime or concrete\n | item9 | 62303 | Nos |
| 10 | 10 | Scraping\nTiles dismantled from the work in lime or\ncement. | item10 | 6958 | Nos |
| 11 | 11 | Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)\n | item11 | 29.91 | sqm |
| 12 | 12 | Centring and shuttering for columns (Square or rectangular or poly gonal in plain)\n | item12 | 16.07 | sqm |
| 13 | 13 | Centring and shuttering for faces of walls, partitions, retaining walls and the like (vertical or bartering including attached pillasters buttersses etc | item13 | 5.56 | sqm |
| 14 | 14 | Centring and shuttering for sides and soffits of beam, beams launchings girders bressumers, lintels | item14 | 66.05 | sqm |
| 15 | 15 | Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.\n | item15 | 292.921 | sqm |
| 16 | 16 | Cement Concrete 1:8:16 with stone ballast 40 mm gauge stone aggregate using concrete mixer volumetric type but excluding cost of cement | item16 | 10.965 | cum |
| 17 | 17 | Cement Concrete 1:6:12 with stone ballast 40 mm gauge stone aggregate using concrete mixer volumetric type but excluding cost of cement | item17 | 1.22 | cum |
| 18 | 18 | Cement Concrete 1:4:8 with stone ballast of size using concrete mixer volumetric type but excluding cost of cement | item18 | 22.77 | cum |
| 19 | 19 | Cement concrete 1:2:4 with stone ballast or shingle using concrete mixer volumetric type but excluding cost of cement | item19 | 1.656 | cum |
| 20 | 20 | Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS: 1791 and vibrated by needle vibrator but excluding steel reinforcement, centering and shuttering in foundation and plinth | item20 | 22.988 | cum |
| 21 | 21 | Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS: 1791 and vibrated by needle vibrator but excluding steel reinforcement, centering and shuttering in super structure | item21 | 51.758 | cum |
| 22 | 22 | Damp proof course 7.5 cm thick of cement concrete 1: 2: 4 with two coats of bitumen 20/30 penetration at 1.65 kg per sqm laid hot and sanded. | item22 | 32.404 | sqm |
| 23 | 23 | Damp proof course 4.0 cm thick of cement concrete 1: 2: 4 with two coats of bitumen 20/30 penetration at 1.65 kg per sqm laid hot and sanded. | item23 | 29.86 | sqm |
| 24 | 24 | First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth. | item24 | 3.31 | cum |
| 25 | 25 | First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth. | item25 | 47.082 | cum |
| 26 | 26 | First class burnt brick work laid in cement sand mortar 1:4 in superstructure | item26 | 117.537 | cum |
| 27 | 27 | Extra for additional storey upto 4 metres above the top of structural roof of lower storey. | item27 | 11.79 | cum |
| 28 | 28 | Terracing consisting of tiles 27.86x11.43x3.83 Cm laid over 25mm mud plaster 7.5cm mud filling on another laver of 25 mm mud plaster i/c 2-coats of bitumen laid hot @ 1.65 kg/sqmtr on top of RCC lab i/c grouting with cement sand mortar 1:4 & top surface to be left clean after wire brushiing | item28 | 263.41 | sqm |
| 29 | 29 | Providing and fixing cast iron shoe for rain water pipe on wooden plugs fixed on wall face including filling the joints with spun yarn and cement mortar 1:2.\n | item29 | 8 | Nos |
| 30 | 30 | Embedding 100mm dia CI rain water non pressure ISI mark pipe in cement mortar during masonry work. \n | item30 | 29.46 | m |
| 31 | 31 | Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16. | item31 | 8 | Nos |
| 32 | 32 | Bottom Khurra on ground 1.2m x 0.6m consisting of brick on-edge laid in cement mortar 1:3 over 75mm cement concrete 1:8:16 including 12.5mm thick cement plaster 1:3 | item32 | 8 | Nos |
| 33 | 33 | Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified. | item33 | 69.61 | m |
| 34 | 34 | P&F false ceiling at all heights of 600x60012.5 mm thick gypsm board ceiling GI cradling hinged from the ceiling by means of GI hanger complete | item34 | 96 | sqm |
| 35 | 35 | Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling.\n | item35 | 240.97 | sqm |
| 36 | 36 | Conglomerate floor 40mm thick cement concrete topping 1:2:4. | item36 | 240.97 | sqm |
| 37 | 37 | Conglomerate floor 50mm thick cement concrete topping 1:2:4. | item37 | 7.2 | sqm |
| 38 | 38 | Flat brick or tile flooring laid in cement sand mortar 1:4 on 100mm thick cement concrete 1:8:16 and 100mm thick sand filling and cement pointed 1:2 on top. | item38 | 26.94 | sqm |
| 39 | 39 | Anti-skid floor tiles 10mm thick in flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with white cement slurry in joints including corners \angles and beading. | item39 | 7 | sqm |
| 40 | 40 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle\ngreen black of size 200 x 300 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching\nshade complete. | item40 | 25.79 | sqm |
| 41 | 41 | Providing and laying vitrified floor tiles 600x600mm size premium quality, manufactured using Double Charge Technology, with water absorption less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 fine sand) for new flooring laid with cement based high polymer modified quick set tile adhesive (water based) of approved make IS 15477 marked using 5 Kg adhesive per sqm of tile area in average 3mm thickness over existing base,etc. complete (Design is homogenous throughout the tile body). \n | item41 | 245.91 | sqm |
| 42 | 42 | Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade made by block making machine with strong vibratory compaction and of approved size and design / shape laid in Ordinary Grey Colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge for Light Traffic Areas such as Pedestrian plazas, shopping complexes, ramps, car parks, office driveways, housing colonies, office complexes, rural roads with low volume traffic, farm houses, beach sites, tourist resorts, local authority footways, residential roads, etc. | item42 | 35 | sqm |
| 43 | 43 | 12.5 mm thick cement plaster 1:4 | item43 | 42.61 | sqm |
| 44 | 44 | 12.5 mm thick cement plaster 1:5 | item44 | 542.11 | sqm |
| 45 | 45 | 20mm thick cement plaster 1:4 in two coat work\n | item45 | 22.92 | sqm |
| 46 | 46 | 20mm thick cement plaster 1:5 in two coat\nwork | item46 | 575.27 | sqm |
| 47 | 47 | Plastering on underside of ceiling 10 mm\nthick cement plaster 1:3\n | item47 | 6.71 | sqm |
| 48 | 48 | 20 mm thick cement plaster in damp proof\ncourse 1:3 with two coats of bitumen at\n1.65Kg. Per sqm laid hot and sanded\n(a) Vertical | item48 | 32.2 | sqm |
| 49 | 49 | Bearing Plaster of 10 mm thick cement mortar 1:3 cement sand finished with a floating coat of neat cement and thick coat of Lime wash / P.O.P. on op of walls when dry for bearing of R.C.C. slabs &\nbeams. | item49 | 27.13 | sqm |
| 50 | 50 | Finishing walls with acrylic smooth exterior paint of required shade with two coats applied @ 1.67 litre/10sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 sqm\n | item50 | 617.88 | sqm |
| 51 | 51 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two coats to get required finish\n | item51 | 1175.22 | sqm |
| 52 | 52 | Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two coats)\n | item52 | 557.34 | sqm |
| 53 | 53 | Providing and fixing bright finished brass 100 mm mortise latch and lock with 6 levers and a pair of lever handles with necessary screws, etc complete (best make of approved quality) | item53 | 1 | Nos |
| 54 | 54 | Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt)\nFor shutter area above 0.50 sqm | item54 | 28.88 | sqm |
| 55 | 55 | Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete\n I.S.I Designation No. II (size of door\n701mm to 850mm) | item55 | 8 | Nos |
| 56 | 56 | Providing and fixing aluminium work for doors,\nwindows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is:733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically herever required including cleat angle, aluminium snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-InCharge. (Glazing and paneling to be paid for separately) :\nFor fixed portion and chaukhats | item56 | 230.57 | kg |
| 57 | 57 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-InCharge. (Glazing and paneling to be paid for separately) : \n For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of\nPVC Plug / neoprene gasket required | item57 | 257.03 | kg |
| 58 | 58 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides | item58 | 12.89 | m |
| 59 | 59 | Providing and fixing glazing in aluminium door,window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of\naluminium snap beading shall be paid in basic item)\nFloat glass panes of 5.5 mm thickness\n | item59 | 12.56 | sqm |
| 60 | 60 | Providing and fixing aluminium sliding door bolts\nISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :\n300mm x 16mm | item60 | 1 | Nos |
| 61 | 61 | Providing and fixing aluminium sliding door bolts\nISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :\n250mm x 16mm | item61 | 4 | Nos |
| 62 | 62 | Cold twisted deformed (Ribbed/ Tor Steel Bar) Bars Fe 500 grade as per IS 1786-1985, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete | item62 | 45.62 | qtl |
| 63 | 63 | Providing polyster powder coating 50 micron any coloured specified to aluminum section of various sizes including carriage of material from market to workshop | item63 | 487.6 | kg |
| 64 | 64 | Compacting original ground below road crust Loosening, leveling and compacting original ground up to a level of 500mm below road crust, mixed with water at OMC, levelled, graded and compacted in layers by rolling so as to achieve minimum dry density as given in Table 300-2 for sub grade construction as per technical clause 305 of MORT&H specifications | item64 | 45.54 | cum |
| 65 | 65 | Providing, laying, spreading and compacting stone aggregates of grade II to water bound macaam specifications including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type ofscreening/binding materials to fill up the interstices of coarse aggregate, watering and compacting to required density complete as per technical clause 404 of MORT&H specifications | item65 | 68.31 | cum |
| 66 | 66 | Providing and laying, jointing fixing and testing G.I. Pipe lines B-Class including cost of specials such as tees, bends, sockets, elbows etc. testing, cutting, threading Inside building complete.\n15mm1/2”dia G.I. pipe | item66 | 40 | m |
| 67 | 67 | Providing and laying, jointing fixing and testing G.I. Pipe lines B-Class including cost of specials such as tees, bends, sockets, elbows etc. testing, cutting, threading Inside building complete.\n20mm 3/4” dia G.I. pipe | item67 | 60 | m |
| 68 | 68 | Providing, fixing and jointing Union\nCouplings in G.I. Pipe lines.\n1/2” dia (15mm) i/d pipe line | item68 | 4 | Nos |
| 69 | 69 | Providing, fixing and jointing Union\nCouplings in G.I. Pipe lines.\n3/4” dia (20mm) i/d pipe line | item69 | 4 | Nos |
| 70 | 70 | Providing, fixing and jointing gun-metal peet valves (heavy pattern) with hand wheels, on GI pipe lines laid in the or inside buildings including all carriages complete\n20 mm i/d Gun Metal Peet Valve Heavy Pattern | item70 | 5 | Nos |
| 71 | 71 | Providing, fixing and jointing gun-metal peet valves (heavy pattern) with hand wheels, on GI pipe lines laid in the or inside buildings including all carriages complete\n25 mm i/d Gun Metal Peet Valve Heavy Pattern | item71 | 5 | Nos |
| 72 | 72 | Providing and fixing cast iron surface box for peet valve stop cock including all carriages complete | item72 | 5 | kg |
| 73 | 73 | Cutting holes upto 23cm square thorugh B.B. in mud walls for pipes, and making goo/d including repointing, replastering and finishing according to existing finish where required through wall 22.86 cm thick. | item73 | 6 | Nos |
| 74 | 74 | Cutting holes upto 23cm square for pipes in flooring and roofs of bricks, tiles with lime concrete or cement concrete and making good including repointing, replastering and colour or white washing where required \nThrough floor or roof 15.00cm thick | item74 | 8 | m |
| 75 | 75 | Excavation manually in trenches with straight or open cutting in built up street lane complete | item75 | 18 | cum |
| 76 | 76 | Earth work in excavation in Foundations Trenches etc., for storage and sedimentation tanks, high level tanks, filter beds, clear water reservoirs, pump houses, sumps, creening chambers and other similar works to full dimension and depth as shown on the drawings or as shall be required by Engineerin-charge, including dressing of ottom and sides of trenches, stacking the excavated soil clear from the excavation and subsequent filling around Plinth/structures in 15 cms. layers with compaction including Disposal of surplus spoils as Directed within a lead of 30 Metres\n For all classes of soil except rocky. | item76 | 34.88 | cum |
| 77 | 77 | Earthwork in excavation for storage and sedimentation tanks, high level tanks, filter beds, clear water reservoirs, pump houses, sumps, screening chambers and other similar works having straight or open cuttings in foundations trenches, etc. with 3D excavator/ JCB inclding manually dressing of bed, trimming of sides and side slope to full dimension and depth as shown on the drawings or as shall be required by Engineer-in-charge, including dressing of bottom and sides of trenches, stacking the excavated soil clear from the excavation and subsequent filling around plinth structures including watering, dressing and disposal of surplus soils as directed up to 15 metres complete in all respects\nFor all classes of soil except rocky. | item77 | 34.88 | cum |
| 78 | 78 | Providing & fixing 560mm, 500mm and 450mm internal Diametre circular or 455 mm x 610mm clear inside opening rectangular cast iron manhole cover and frame ISI marked as per IS12592-2002 including carriage from the stores of the Engineer-in-charge to site of work, loading, unloading including stacking and setting the same to correct lines and levels in 1:2 cement sand mortar over manholes including cement concrete copping (1:2:4)around the frame etc.Dia of steel for lifting hook is 16mm.\nR.C.C. Manhole cover 450mm i/d Heavy duty | item78 | 1 | Nos |
| 79 | 79 | Providing & fixing 560mm, 500mm and 450mm internal Diametre circular or 455 mm x 610mm clear inside opening rectangular cast iron manhole cover and frame ISI marked as per IS12592-2002 including carriage from the stores of the Engineer-in-charge to site of work, loading, unloading including stacking and setting the same to correct lines and levels in 1:2 cement sand mortar over manholes including cement concrete copping (1:2:4)around the frame etc.Dia of steel for lifting hook is 16mm.\n R.C.C. Manhole cover Light duty Rectangular single/double seal pattern 450mm x 600mm clear inside opening | item79 | 1 | Nos |
| 80 | 80 | Providing, lowering, cutting & jointing salt Glazed Stone ware Pipes and Specials ISI marked as per IS 651-2007 class Sp-1 into Trenches for all depths and Laying out the same to correct alignment, Gradients, levels etc., In Trenches including all dressing and trimming of bed and sides of trenches, if required trimming and cutting of concrete beds and joints holes, supporting the pipes and specials, in correct position in a suitable rigid manner while the same are being jointed and until the urroundingbenching, haunching and envelopes are completed. The sewer shall rest on the bed at every point through-out its length and to ensure this, it shall be grouted in without extra charge by the contractor with 1:3 cement sand mortar including jointing of pipes and specials in trenches, using cement sand mortar 1:1 and best white italian pun yarn, finishing and trowelling of each joint at an angle of 45degree with the longitudinal axes of pipe, watering, keeping the joint covered and wetted till the same are cured, testing the sewerage line for leakage and making all leakages and defects good as laid in the contract specification, chipping and finishing the cut surface to niform finish to the entire satisfaction of engineer-incharge Including all cartage etc. \n100 i/d pipe | item80 | 40 | m |
| 81 | 81 | Construction of brick masonry inspection chambers size as given below upto 0.60 m average depth in 1:5 cement sand mortar, lime concrete with 40 per cent lime mortar 2:3 in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside light duty C.I. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design. \nSize 450mm x 450mm inside with RCC 455mm x 455mm cover and frame light duty double seal | item81 | 6 | Nos |
| 82 | 82 | Extra for every 0.30 m depth of inspection chamber. \n450mm x 450mm | item82 | 3 | each\nDepth\nof 0.30\nm. |
| 83 | 83 | Providing and fixing in position Chinaware Indian Orisa water closet sizes 580mm (to the approval of the Engineer-in-charge) suiteconsisting of 10 ltr. PVC flushing istern supported on angle iron bracket including cost of long bend 32 mm dia complete in all respect and to the entire satisfaction of engineer in charge. | item83 | 2 | Nos |
| 84 | 84 | P & F in position Chinaware Europeon type water closet P-trap or S-trap ( to be approved of the Engineer Incharge) suit consisting of 10 ltr PVC flushing cistern supported on angles iron brackets,short bend 32 mm dia i/c cost of solied white cover complete in all respect & to the entire satisfaction of engineer in charge | item84 | 3 | Nos |
| 85 | 85 | Extra for providing and fixing 10 litres capacity Chinaware low level flushing cistern with PVC internal fitting, instead of 10 litres capacity PVC flushing cistern. | item85 | 2 | Nos |
| 86 | 86 | Extra for providing and fixing C.P. Brass short flush bend 32mm instead of PVC short bend. | item86 | 5 | Nos |
| 87 | 87 | Providing & fixing in position best Indian make (to be approval of the Engineer-incharge) vitreous Chinware white flat back or angular lipped front urinal size 460x 350 x260 mm C.P. brass flexible tube connection 300 mm long. | item87 | 5 | Nos |
| 88 | 88 | Extra for providing & fixing PVC 32 mm dia waste pipe up to floor level & plumbing joints | item88 | 5 | Nos |
| 89 | 89 | Providing and fixing in position best Indian make white ordinary lavatory suites consisting of C.P. brass waste 32mm dia, pair of angle iron bracket with one C.P. brass tap complete.Size 550 mm x 400 mm | item89 | 5 | Nos |
| 90 | 90 | Providing and fixing in position 32 mm dia G.I waste pipe embedded in wall 2.8 mm thick upto floor level including cost of wipped solder joint etc. complete as required by the Engineer in charge. | item90 | 5 | Nos |
| 91 | 91 | Providing and fixing in position best Indian make chromium plated brass, Bottle trap 32mm dia with 40 mm seal . | item91 | 5 | Nos |
| 92 | 92 | Providing and fixing in position best quality stainless steel sinks with complete fitting. \nSize 600 mm x 450 mm x 200 mm\n(Net size excluding flat edge) | item92 | 2 | Nos |
| 93 | 93 | Providing and fixing in position towel rails / ring fixed in with rawl plugs embedded in walls with brass rews, complete in all respects including cutting and making good the walls etc. \nC.P. brass towel Rails size 15mm dia\n600mm long | item93 | 5 | Nos |
| 94 | 94 | Providing and fixing in position glass shelf fixed in with rawl plugs with C.P brass screws complete ncluding cutting and making good the walls etc. \nC.P. brass brackets and guard rails size 560mmx130mm | item94 | 5 | Nos |
| 95 | 95 | Providing & Fixing in position best indian make bevelled edge 5mm thick mirror mounted on 4mm thick ardboard sheet ground fixed in position by means of 4 nos. chromium plated brass screws and washers over rubber washers and rawl plugs embedded in the walls or chromium plated brass clamps with C.P. rass screws (as required by the Engineer-in- Charge) complete including cutting and making good the walls etc. \nSize 600mmx450mm | item95 | 5 | Nos |
| 96 | 96 | Providing & Fixing in postion 15 mm i/d bib cock of best quality (as approved by the Engineer-in-charge). \nC.P. brass Bib cock female end | item96 | 7 | Nos |
| 97 | 97 | Providing & Fixing in postion stop cock / Angle valve (as approved by the Engineer-incharge). \nC.P.brass 15mm stop cock Male and female | item97 | 13 | Nos |
| 98 | 98 | Providing & fixing in position best Indian make PVC flexible tube connection. \nPVC tube connection of size 15 mm x 450 mm with C.P. Brass nut | item98 | 13 | Nos |
| 99 | 99 | Providing and fixing in position Centrifugally cast iron soil waste vent or anti syphonage pipes to I.S.I. specification of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of lead jointing.\n110mm i/d Centrifugally cast iron pipe lines laid complete\n | item99 | 20 | m |
| 100 | 100 | Providing and fixing in position Centrifugally cast iron soil waste vent or anti syphonage pipes to I.S.I. specification of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of lead jointing.\n75mm i/d Centrifugally cast iron pipe lines laid complete | item100 | 25 | m |
| 101 | 101 | Providing lead caulked joints to H.C.I. pipes and specials conforming to I.S.I. Specification of E.L.C. anufacture or any other reputed firm including cost of lead yarn, fuel and tools etc.\n100mm i/d (1.36 kg.) | item101 | 16 | Nos |
| 102 | 102 | Providing lead caulked joints to H.C.I. pipes and specials conforming to I.S.I. Specification of E.L.C. anufacture or any other reputed firm including cost of lead yarn, fuel and tools etc.\n75mm i/d (1.36 kg.) | item102 | 20 | Nos |
| 103 | 103 | Providing and fixing H.C.I. Floor traps conforming to I.S.I. Specification of reputed firm of the self cleaning design with C.P. brass hinged grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors,etc. minimum depth of water should be 150mm with a inimum seal 50mm. \nWith 75mm i/d outlet shallow seal | item103 | 11 | Nos |
| 104 | 104 | Providing and fixing in position H.C.I special for soil waste vent or anti syphonage pipes to I.S.I pecifications of E.L.C manufacture or any other reputed firm including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.\n100mm i/d Cowls | item104 | 2 | Nos |
| 105 | 105 | Providing and fixing in position H.C.I special for soil waste vent or anti syphonage pipes to I.S.I pecifications of E.L.C manufacture or any other reputed firm including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.\n75mm i/d Cowls | item105 | 2 | Nos |
| 106 | 106 | Providing & fixing in position PVC water storage tanks triple layer make as approves by Engineer-in-Charge including hosting and carriage from store to site of work complete with providing and fixing 15mm or 20mm internal Diametre tanki nipple complete.(Excluding cost of platform). \nTanks upto 1000 ltr. Capacity\n4 PVC water storage tank of 500 Ltr each | item106 | 1000 | litre |
| 107 | 107 | Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and hamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. with three coats of black bitumastic superior paint of approved manufacture on all C.I. work as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm. \n100mm internal Diametre S.W.gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm | item107 | 5 | Nos |
| 108 | 108 | RECESSED HDPE PIPE WIRING SYSTEM WITH MODULAR SWITCHES\nWiring in PVC insulated copper conductor single core FRLS cable (ISI marked), 1100volts grade to be laid in HDPE electrical conduit pipe 20 mm/25 mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powdercoated/anodized concealed metal boxes required for having\nelectronic fan regulators (socket size), bell push, electronic buzzer, 3pin 6Amp., 3pin 16/20 Amp. Sockets and 6 Amp./16/20Amp. Swithces (flush piano type accessories) etc.and covered with brown bakelite white glazed translucent backside painted sheet 3mm thick etc., & including the cost of flush piano type witches/sockets, step type electronic fan regulator 100 watts, PVC connector (For Fan Box and Electronic Buzzer), PVC Bush, Steel Hooks, Circular Inspection Box (Recessed Type and Deep Type) conduit pipe & copper wire and other petty material etc. including the cost of cutting and filling up of chases:-\n Wiring fan point without fan box in PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100volts grade with step type electronic fan regulator 100watts (socket size). | item108 | 7 | Nos |
| 109 | 109 | RECESSED HDPE PIPE WIRING SYSTEM WITH MODULAR SWITCHES\nWiring in PVC insulated copper conductor single core FRLS cable (ISI marked), 1100volts grade to be laid in HDPE electrical conduit pipe 20 mm/25 mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powdercoated/anodized concealed metal boxes required for having\nelectronic fan regulators (socket size), bell push, electronic buzzer, 3pin 6Amp., 3pin 16/20 Amp. Sockets and 6 Amp./16/20Amp. Swithces (flush piano type accessories) etc.and covered with brown bakelite white glazed translucent backside painted sheet 3mm thick etc., & including the cost of flush piano type witches/sockets, step type electronic fan regulator 100 watts, PVC connector (For Fan Box and Electronic Buzzer), PVC Bush, Steel Hooks, Circular Inspection Box (Recessed Type and Deep Type) conduit pipe & copper wire and other petty material etc. including the cost of cutting and filling up of chases:-\nWiring light point in PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100volts grade. | item109 | 23 | Nos |
| 110 | 110 | RECESSED HDPE PIPE WIRING SYSTEM WITH MODULAR SWITCHES\nWiring in PVC insulated copper conductor single core FRLS cable (ISI marked), 1100volts grade to be laid in HDPE electrical conduit pipe 20 mm/25 mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powdercoated/anodized concealed metal boxes required for having\nelectronic fan regulators (socket size), bell push, electronic buzzer, 3pin 6Amp., 3pin 16/20 Amp. Sockets and 6 Amp./16/20Amp. Swithces (flush piano type accessories) etc.and covered with brown bakelite white glazed translucent backside painted sheet 3mm thick etc., & including the cost of flush piano type witches/sockets, step type electronic fan regulator 100 watts, PVC connector (For Fan Box and Electronic Buzzer), PVC Bush, Steel Hooks, Circular Inspection Box (Recessed Type and Deep Type) conduit pipe & copper wire and other petty material etc. including the cost of cutting and filling up of chases:-\nWiring 3 pin 16/20 amp. power plug control and switch | item110 | 11 | Nos |
| 111 | 111 | RECESSED HDPE PIPE WIRING SYSTEM WITH MODULAR SWITCHES\nWiring in PVC insulated copper conductor single core FRLS cable (ISI marked), 1100volts grade to be laid in HDPE electrical conduit pipe 20 mm/25 mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powdercoated/anodized concealed metal boxes required for having\nelectronic fan regulators (socket size), bell push, electronic buzzer, 3pin 6Amp., 3pin 16/20 Amp. Sockets and 6 Amp./16/20Amp. Swithces (flush piano type accessories) etc.and covered with brown bakelite white glazed translucent backside painted sheet 3mm thick etc., & including the cost of flush piano type witches/sockets, step type electronic fan regulator 100 watts, PVC connector (For Fan Box and Electronic Buzzer), PVC Bush, Steel Hooks, Circular Inspection Box (Recessed Type and Deep Type) conduit pipe & copper wire and other petty material etc. including the cost of cutting and filling up of chases:-\nWiring 3 pin 6 Amp. wall socket point in PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100volts grade complete with bonding to existing earth with PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1 sq. mm, 1100volts grade. | item111 | 26 | Nos |
| 112 | 112 | Supply and erection of PVC insulated single core FRLS copper conductor cable ISI marked left bare in pipe or casing of suitable size excluding the cost of supply and erection of pipe or casing.\ni) Size 2.5 mm (1.1.80mm) 1100 volts grade. | item112 | 210 | m |
| 113 | 113 | Supply and erection of PVC insulated single core FRLS copper conductor cable ISI marked left bare in pipe or casing of suitable size excluding the cost of supply and erection of pipe or casing.\nii) Size 4mm (1/2.24mm) 1100volts grade | item113 | 200 | m |
| 114 | 114 | Supply and erection of PVC insulated single core FRLS copper conductor cable ISI marked left bare in pipe or casing of suitable size excluding the cost of supply and erection of pipe or casing.\niii) Size 6 sq.mm | item114 | 50 | m |
| 115 | 115 | Supply & erection of pipe for wiring purposes including bends,inspection boxes etc., where necessary including painting as per PWD General Specifications 2010:-\ni.Heavy gauge PVC conduite pipe (2.00mm thick) 25mm dia (flushed) | item115 | 360 | m |
| 116 | 116 | Supply & erection of pipe for wiring purposes including bends,inspection boxes etc., where necessary including painting as per PWD General Specifications 2010:-\nHeavy gauge PVC conduit pipe 32mm dia. (ISI marked 2mm thick) Flushed | item116 | 75 | m |
| 117 | 117 | SUPPLY AND ERECTION OF WIRING ACCESSORIES:\nSupply and erection of switches, sockets, power switch and sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including connections and petty material etc.\nCeiling rose (flush piano type) | item117 | 10 | Nos |
| 118 | 118 | SUPPLY AND ERECTION OF WIRING ACCESSORIES:\nSupply and erection of switches, sockets, power switch and sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including connections and petty material etc.\n Call bell 220/230 volts AC ding dong | item118 | 2 | Nos |
| 119 | 119 | Supply and erection of Miniature Circuit Breakers/ RCBO's/ RCCB's in the existing MCB distribution board as per PWD General Specifications 2010 including connections with suitable size of thimbles/lugs.\nMiniature circuit breaker single pole 6 to 32amp. (Breaking capacity 10kA, Curve-C) suitable for 240/ 415 volts 50cycles AC supply | item119 | 40 | Nos |
| 120 | 120 | Supply and erection of Miniature Circuit Breakers/ RCBO's/ RCCB's in the existing MCB distribution board as per PWD General Specifications 2010 including connections with suitable size of thimbles/lugs.\nMiniature circuit breaker four pole 50, 63amp. (Breaking capacity 10kA, Curve-C) suitable for 240/ 415 volts 50cycles AC supply | item120 | 5 | Nos |
| 121 | 121 | S&E Miniature circit breaker single pole 0.5 to 4 amp (breaking capacity 10 kA curve-C) suitable for 240/415 volts 50cycles AC supply | item121 | 1 | Nos |
| 122 | 122 | Sheet metal double door T.P. & N. distribution board (dust protected) provided with bus bar, neutral link and din bar,suitable for incorporating FP/ TPN MCB's/ isolators for incoming and DP/ SP & N/ Single Pole MCB's/ RCBO/ RCCB's for outgoing 4 way each | item122 | 2 | Nos |
| 123 | 123 | Sheet metal double door S.P. & N. distribution board (dust protected) provided with bus bar, neutral link and din bar,suitable for incorporating MCB's/ RCBO/ RCCB's for outgoing 16 way each | item123 | 1 | Nos |
| 124 | 124 | Extra Carriage of Crusher, Stone Ballast, C.Sand beyond 5 kms | item124 | 175.6 | cum |
| 125 | 125 | Extra Carriage of Fine Sand beyond 5 kms | item125 | 125.74 | cum |
| 126 | 126 | Extra Carriage of Bricks beyond 5 kms | item126 | 76152 | Nos |
| 127 | 127 | Extra Carriage of cement beyond 5 kms | item127 | 62.29 | tn |
| 128 | 128 | Extra Carriage of Steel beyond 5 kms | item128 | 4.562 | tn |
| 129 | 129 | Extra Carriage of Brick Tiles beyond 5 kms | item129 | 9746 | Nos |
| 130 | 130 | Difference of material for Coarse Sand | item130 | 39.25 | cum |
| 131 | 131 | Difference of material for Crushed Bajri 13.2 mm | item131 | 38.85 | cum |
| 132 | 132 | Difference of material for Crushed Bajri 11.2 mm | item132 | 38.85 | cum |
| 133 | 133 | Difference of material for Stone Ballast | item133 | 58.64 | cum |
| 134 | 134 | Difference of material for Bricks | item134 | 76152 | Nos |
| 135 | 135 | Difference of material for Tiles | item135 | 9746 | Nos |
| 136 | 136 | Difference of material for Stone Metal | item136 | 68.31 | cum |
| 137 | 137 | Recovery of steel scrap from dismantled building | item137 | 8996 | kg |
| 138 | 138 | Recovery of bricks scrap from dismantled building | item138 | 62303 | Nos |
| 139 | 139 | Recovery of Dismantled Doors | item139 | 11 | Nos |
| 140 | 140 | Recovery of Windows/Ventilators | item140 | 32 | Nos |
| 141 | 141 | Recovery of dismantled Bricks as brick Bats | item141 | 91.5452 | cum |
| 142 | 142 | Reovery of dismantled brick tiles | item142 | 6958 | Nos |
| 143 | 143 | P&F wire mesh in window panes complete fitted with U/square pipe to hold the gap between clips | item143 | 6.83 | sqm |
| 144 | 144 | Supplying and fixing general purpose general tube fitting of Crompton make on wall (Model-DIJB12414EB9) 1x36 W | item144 | 13 | Nos |
| 145 | 145 | Supplying and fixing Eshaust Fan of 12\" sweep of Crompton make including louver (Model T5JB1328EB | item145 | 2 | Nos |
| 146 | 146 | Supplying and fixing ceiling fan 1400 mm sweep of crompton make | item146 | 11 | Nos |
| 147 | 147 | Supply and fixing ceiling light 2'x2' of crompton make (Model-CFFQ-11336 Incl tube rods | item147 | 5 | Nos |
| 148 | 148 | Providing and fixing 30x30x3 mm angle iron for indoor cable trenches | item148 | 48 | m |
| 149 | 149 | Providing and fixing MS Chequered plate 5 mm thick | item149 | 378.43 | kg |
| 150 | 150 | Providing and Fixing Cable racks of size 40x40x5 mm | item150 | 23.4 | kg |
| 151 | 151 | P & F of 18” dia 1440 RPM single Phase Exhaust fan with louvers of make Crompton Greaves /Philips India/ Bajaj/ Genelac / Khaitan as per Technical specification No. 20. The conyractor should specify the make. | item151 | 1 | Nos |
| 152 | 152 | Providing and fixing steel gate Type G-2 (5.8m) as per Arch. Drawings | item152 | 1 | Nos |
| 153 | 153 | Providing and fixing toughened glass 6 mm thick | item153 | 3.84 | sqm |
| 154 | 154 | Providing and fixing toughened glass 12 mm thick | item154 | 1.47 | sqm |
AI Tender Summary
Tender Timeline
Aug 27, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedSep 09, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 13, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender