Proposed Civil Work Alteration / Renovation And Interior Work For The Rooms Of Bhaktaniwas Of Saptashrungi Niwas Building
Tender Value
1.10 Crore
Estimated cost
Bid Submission
09 Sep 2019
0 days left
EMD
1.10 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
SHREE SAPTASHRUNG NIWASINI DEVI TRUST → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Proposed Civil Work Alteration / Renovation And Interior Work For The Rooms Of Bhaktaniwas Of Saptashrungi Niwas Building
BOQ
| Name of Work: Proposed Alteration / Renovation & Interior work for Bhaktaniwas Rooms of \"Saptashrungi Niwas\" Building. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1.1 | SUB WORK 1 - Civil Work | |||
| 2 | 1.2 | Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc. | 43 | Cmt | |
| 3 | 1.3 | Removing brick bat coba including stacking the spoils as directed with all leads, lifts etc, complete. | 73.1 | Cmt | |
| 4 | 1.4 | Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete.\n | 58 | Nos | |
| 5 | 1.5 | Removing ventilators and small windows with frame and stacking the materials with all leads, lifts etc. complete. | 21 | Nos | |
| 6 | 1.6 | Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with\nall leads, lifts etc. complete | 407 | Smt | |
| 7 | 1.7 | Removing iron pipe railing having wooden R.C.C. or C.C. or iron post and stacking the materials as directed etc. complete.\n | 50 | Rmt | |
| 8 | 1.8 | Removing cast iron or wrought iron or A.C. pipe and stacking them as directed with all leads, lifts etc. complete. | 232 | Rmt | |
| 9 | 1.9 | Dismantling the R.C.C. Work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete. | 8 | Cmt | |
| 10 | 2 | Removing urinal pans or wash hand basins with frame including disconnecting the sanitary and water supply connections, removing the same carefully and stacking the serviceable materials as and where directed including throwing the unserviceable materials outside etc complete\n | 11 | Nos | |
| 11 | 2.1 | Removing W.C. pans including disconnecting the sanitary and water supply connections, removing and breaking flooring and bed con-crete around pan removing the same carefully and stacking the serviceable materials as adn where directed including throwing the unserviceable materiasls out side etc. carefully and throwing out the refusal outside etc. complete. | 11 | Nos | |
| 12 | 2.2 | Providing and fixing double scaffolding system (cup lock type) on the exterior side of building / structure, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, | 150 | Smt | |
| 13 | 2.3 | M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and / or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer -in - charge. Note :- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for execution of all items for such works. | |||
| 14 | 2.4 | Removing chockes and leakages from down take G.I/CI/PVC pipe line on walls floor level by using zoola / scaffolding and rectify the same for functioning with all lifts etc. complete. | 25 | Nos | |
| 15 | 2.5 | Filling tiles joint portion of flooring and dado filling with white cement by removing existing loose morter/ cement slurry from joint with tools and finish with ashing cleaning and curing etc. complete. | 150 | Smt | |
| 16 | 2.6 | Providing and grouting the holes by Poly Ceramic Cementitious i.e NicGrout G 06 + 53 grade cement material of Dimple Chemicals as per requirement to reduce the porosity of concrete / Masonry structure and to increase the strength of structure using grouting pipes , grouting m/c, mixer etc and all relevant safety with all leads and lifts, material, machinery, labour, etc. Complete as per specification and as directed by Engineer-in-Charge | 8 | Kg | |
| 17 | 2.7 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc. complete. By Mechanical Means. With Lift upto 1.5 m. | 6.25 | Cmt | |
| 18 | 2.8 | Excavation for foundation in Hard murum and boulders including removing the excavated material upto a distance of 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 m to 3.0 m.) By Mechanical Means\n | 6.25 | Cmt | |
| 19 | 2.9 | Excavation for foundation in Hard rock by blasting including trimming and leveling the bed by chiseling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the building area including dewatering and back filling with available earth/murum, watering, ramming, etc. complete. (Lift upto 1.5m) By Mechanical Means\n | 1 | Cmt | |
| 20 | 3 | Providing dry trap / granite / quartzite / gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting complete. Spec. No. : Bd.A.12 Page No. 264 | 1.5 | Cmt | |
| 21 | 3.1 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely\nwashed etc) | 0.7 | Cmt | |
| 22 | 3.2 | Providing and laying in situ cement concrete of M-25 grade of trap / granite / quartzite / gneiss metal for R.C.C. work in foundations like raft, grillages, strips, foundations and footings of R.C.C. columns and steel stanchions including bailing-out water manually, formwork, compacting, covering newly laid concrete by gunny bag, plastic or tarpaulin, curing and roughening the surface if special finish is to be provided (Excluding reinforcement, & structural steel) The cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. (Wooden planks / shuttering will not be allowed) Spec. No.: Bd.F.3 Page No. 298 and B.7, Page No.38 | 1.2 | Cmt | |
| 23 | 3.3 | Providing and casting in situ cement concrete of M-25 grade of trap granite / quartzite / gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including fixing plastic cover block of required size at 1.5 meter C/C near the edge of each side and at the center when the width is more than 75 cm. to reinforcement to give required clear cover 40mm to 65mm from all sides in R.C.C. Column, centering, formwork of plywood / steel, compaction, covering newly laid concrete by gunny bag, plastic or tarpaulin, finishing the formed surface with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement.) The cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. (Wooden planks / shuttering will not be allowed. The shuttering should be of waterproof plywood or tailer made angle and steel plate) | 0.7 | Cmt | |
| 24 | 3.4 | Providing and casting in situ cement concrete of M-25 grade of trap granite / quartzite / gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including placing in position plastic cover block of required size at 90 cm. C/C each main bottom bars to stamping at sides to give required clear cover from all sides in R.C.C. Beam, centering, formwork of plywood / steel, | 2.5 | Cmt | |
| 25 | 3.5 | compaction, covering newly laid concrete by gunny bag, plastic or tarpaulin, finishing the formed surface with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement. The cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. (Wooden planks / shuttering will not be allowed. The shuttering should be of waterproof plywood or tailer made angle and steel plate) | |||
| 26 | 3.6 | Providing and casting in situ cement concrete of M-25 grade of trap granite / quartzite / gneiss metal for R.C.C. slabs and landings canopy, waist slab with steps as per detailed designs and drawings or as directed including fixing plastic cover block of required size at 27 Nos in per 10Sqm to reinforcement to give a clear cover of 15 mm in R.C.C. Slabs, fixing fan hook box of 100 mm diameter PVC or MS materialwith required depth with holes or notches as required, bottom with 12 mm dia. M.S. bar bent to shape with hooked ends for fan hook and painting to exposed surface, centering, formwork of steel, compaction, covering newly laid concrete by gunny bag, plastic or tarpaulin, finishing the formed surface with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement. The cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. (Wooden planks / shuttering will not be allowed. The shuttering should be of waterproof plywood or tailer made angle and steel plate) Spec. No.: Bd.F.8 Page No. 302 and B.7, Page No.38 | 2.7 | Cmt | |
| 27 | 3.7 | Providing and casting in situ cement concrete of M-25 grade of trap granite / quartzite / gneiss metal for R.C.C. pardi upto 150mm thickness as per detailed designs and drawings or as directed including centering, formwork of steel, compaction, covering newly laid concrete by gunny bag, plastic or tarpaulin, finishing the formed surface with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement. The cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. (Wooden planks / shuttering will not be allowed. The shuttering should be of waterproof plywood or tailer made angle and steel plate) Spec. No.: Bd.F.11 Page No. 304 and B.7, Page No. 38 | 14 | Cmt | |
| 28 | 3.8 | Providing and fixing in position T.M.T. steel bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.(T.M.T. steel from Minimill / Mini plant Plant) Spec. No. : Bd.F.17 Page 306 | 1.6 | MT | |
| 29 | 3.9 | Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. | 5 | Cmt | |
| 30 | 4 | Providing Bricks masonry in cement mortar 1:6 using Second class burnt bricks in superstructure including striking joints, raking out joints, watering and scaffolding complete. | 32.6 | Cmt | |
| 31 | 4.1 | Providing Brick masonry in cement mortar 1:4 using Second class burnt bricks in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm at every third course, properly bent and bonded at ends scaffolding, raking out joints and watering complete. | 50 | Smt | |
| 32 | 4.2 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.\n | 118 | Smt | |
| 33 | 4.3 | Providing internal cement plaster 20mm. thick in two coats in cement mortar 1:4 with neeru finish, to concrete, brick surface, in all positions including scaffolding and curing complete. Spec. No. : Bd.L.4 Page No. 368 | 216 | Smt | |
| 34 | 4.4 | Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete. | 334 | Smt | |
| 35 | 4.5 | Providing sand faced plaster externally in cement mortar using Kharsalia / Kasaba or similar type of sand, in all positions including base coat of 15mm thick in C.M. 1:4 using waterproofing compound at 1kg.per cement bag, curing the same for not less than 3 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8mm thick in C.M. 1:4, finishing the surface by taking out grains and curing for fourteen days, scaffolding etc. complete. Spec. No. : Bd.L.7 Page No. 369 | 345 | Smt | |
| 36 | 4.6 | Labour charges for providing groove in external plaster having width of 2.5cm & space at destance 45cm destance etc. complete. | 200 | Rmt | |
| 37 | 4.7 | Providing and fixing about 30cm width chicken mesh of 22 gauge of approved quality over joints of R.C.C. member and brick wall including fixing of mesh, necessary nailing, drilling, tying etc.complete as directed. (Spec. No. As directed by Engineer in charge). | 50 | Smt | |
| 38 | 4.8 | Providing and fixing solid core flush door single/ double leaf 35mm thick decorative type exterior grade as per detail drawing with approved face laminate 1 mm thick on both faces as approved and as directed with all necessary lipping and with aldrop (10” suare type heavy duty handles with 12” heavy duty latch, 12” tower bolt, 125mm heavy duty hinges, heavy duty stoppers with necessary SS screws, nuts, bolts, oil paint to lipping etc complete as directed by Engineer in charge | 30.25 | Smt | |
| 39 | 4.9 | Providing and Fixing 30 MM thick BOTH SIDE PRELAMINATED SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of M.S tubes of 19 guage thickness and, size 19 x 19 mm for styles and 15 x15 mm for the top and bottom rails, M.S frame shall have a coat of metel primer of approved make and manufacture. M.S frame shall be covered with heat mouled PVC 'C' channel made from 5 mm (+/0.25) thick prelaminated sheet of density 600 kg/cbm ,of size 30mm thickness 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45? angle on either side forming stiles ; and 5 mm thick ,95 mm wide PVC sheet out of which 75 mm shall be falt and 20mm shall be tapered in 45 on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be apered on both sides to form lock rail.Top,bottom and lock rail shall be provided either side of the panel. An additional 5 mm (+/0.25) thick PVC strip of 20 mm width is to be stuck on the bottom side of the ' c ' channel prelaminated paneling of 5 mm (+/0.25) thick PVC sheet to be fitted inside the M.S. frame welded/sealed to the styles and rails with 5 mm (+/0.25) x 30 mm PVC sheetbeading on either side and joined together with solvent cement adhesive etc ,10 mm thickness (5 mm (+/0.25) x 2 nos ) 20 mm wide | 33.1 | Smt | |
| 40 | 5 | Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices | 23.1 | Smt | |
| 41 | 5.1 | including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (With mechanical gear) | |||
| 42 | 5.2 | Providing and fixing in position double anodized aluminum sliding windows of three tracks mitred and mechanically assembled at corners with frame size 92mm x 45mm (bottom frame with gutter section, bottom frame 1.352kg/m and top and side frames 1.257 kg/m) shutters with sections of 18mm x 40mm (wt. 0.56kg/m) and interlocking sections 18mm x 40mm (wt. 0.625kg/m) including 5mm thick plain sheet glass, glazing clips / rubber / PVC gasket / roller bearing encased in nylon casing and self locking catch fitted in vertical section with all other accessories etc. complete. \nAs directed by Engineer in charge.\n | 73 | Smt | |
| 43 | 5.3 | Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. Spec. No.: As directed by Engineer in charge. | 9.5 | Smt | |
| 44 | 5.4 | Providing and fixing mild steel grill gate with frame having weight of gate 15 kg / sqm as per the detailed drawing including hinges, pivot blocks locking arrangement welding riveting and 3 coats of oil painting of approved shade etc. complete. Spec. No. : Bd.W.6 Page No. 585 | 82.5 | Smt | |
| 45 | 5.5 | Providing and Fixing stainless steel (of 304 grade ) grill with SS 30x5 patti and horizontal 12 mm dia bar including buffing,fabricating fixtures and fastening etc. complete (Prior approval of sample and brand by Ex.Engineer is necessary before use) | 118 | Smt | |
| 46 | 5.6 | Providing and Fixing mat finish stainless steel (of 302 grade ) railing with top pipe of 50 mm dia. and vertical pipe of 38 mm dia at 0.60 m c/c or as required and horizontal pipes of 25 mm dia in three rows, all pipes of 2 mm thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 mm dia above newel post of 75 mm diameter etc. complete (Prior approval of sample and brand by Ex.Engineer is necessary before use) | 25 | Rmt | |
| 47 | 5.7 | Providing and laying Glazed vitrified tiles of approved quality 605mmx605mm,10mm thick for flooring,Dado and Skirting in required position laid on a bed of 1:4 cement mortar, including cement float, filling joints with white/ coloured cement slurry, cleaning, curing complete.\n Mirror / Grossi finish\ni) Flooring | 9 | Smt | |
| 48 | 5.8 | Providing and laying Glazed vitrified tiles of approved quality 605mmx605mm,10mm thick for flooring,Dado and Skirting in required position laid on a bed of 1:4 cement mortar, including cement float, filling joints with white/ coloured cement slurry, cleaning, curing complete.\n Mirror / Grossi finish\nii) Skirting | 1.2 | Smt | |
| 49 | 5.9 | Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS.15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. i) Flooring | 10 | Smt | |
| 50 | 6 | Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS.15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. ii) Skirting | 5 | Smt | |
| 51 | 6.1 | Providing and laying Telephone Black / RBI Red polished Granite stone for Cladding for vertical jambs and sills of doors and windows 20 mm to 25 mm thick and of required width in 1:4 cement mortar with mirror polishing including cement float, filling joints with neat same coloured cement slurry, curing, and cleaning complete using the carpet for holding the granite stone in proper position and covering with plaster of paristo avoid damages cleaning the same on completion of work.(Prior permission of SE shall be obtained before inclusion of this item in the estimate) Additional item : As directed by engineer in charge. | 161 | Smt | |
| 52 | 6.2 | Providing and laying Telephone Black / RBI Red polished Granite stone for Cladding for treads and risers 20 mm to 25 mm thick and of required width in 1:4 cement mortar with mirror polishing including cement float, filling joints with neat same coloured cement slurry, curing, and cleaning complete using the carpet for holding the granite stone in proper position and covering with plaster of paristo avoid damages cleaning the same on completion of work.(Prior permission of SE shall be obtained before inclusion of this item in the estimate) Additional item : As directed by engineer in charge. | 10 | Smt | |
| 53 | 6.3 | Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with rounding / moulding the edges etc. complete . Both side polish\n | 23.625 | Smt | |
| 54 | 6.4 | Providing and laying ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. | 61.1 | Smt | |
| 55 | 6.5 | Providing and laying ceramic tiles having size 30 cm. x 60 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. | 305.29 | Smt | |
| 56 | 6.6 | Providing Mirror polishing to Kota Stone including using all necessary stones and equipments cleaning, washing etc. complete. For Flooring | 716 | Smt | |
| 57 | 6.7 | Providing Mirror polishing to Kota Stone including using all necessary stones and equipments cleaning, washing etc. complete. For Skirting | 382 | Smt | |
| 58 | 6.8 | Providing and fixing heavy duty inter locking concrete Rubber mould glossy paving blocks of 80 mm thickness of having a strength of 400 kg/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete. (using 100% crushed sand) | 50 | Smt | |
| 59 | 6.9 | Providing sills of polished Kota stone 25 mm to 30mm thick, on a bed of 1:4 cement mortar including cement float, filling joints with slurry, curing polishing and cleaning etc. complete.\n | 27.5 | Smt | |
| 60 | 7 | Scrapping the old plastered internal surface with sand paper and coating the entire surface with mixture of whiting or glue and linseed oil including scaffolding etc. complete as directed. | 350 | Smt | |
| 61 | 7.1 | Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.\n | 3041 | Smt | |
| 62 | 7.2 | Providing and applying washable plastic emulsion paint with roller finish in two coats of approved colour and shade to existing surface including scaffolding, preparing the surface to receive paint and applying putty etc. complete. Spec. No. : As directed by Engineer in charge. | 3041 | Smt | |
| 63 | 7.3 | Providing and applying external raincoat painting with crack filling acrylic polymer based chemical compound coating to the external surface of walls to prevent water seepage in the masonry walls during monsoon added with required shade Steiner to give required shade to the surface in two coats. Including providing three coat of priming of polymer base primer including preparing surface scrapping the existing loose old paint, removing loose particles of sand on the surface opening and cleaning the cracks developed in the external plaster, removing loose particles by chiseling, filling cracks by chemicals compound of approved make with proper penetration etc. Coating of Raincoat with the help of brush and as per instructions and specification given by manufacturer and with instruction from Engineer in-charge. Work shall be executed by certified applicator only and covering gurantee of 3 years on court stamp paper of Rs. 500/- and necessary testing etc. complete. | 1462 | Smt | |
| 64 | 7.4 | Providing and applying priming coat over new/old steel and other metal surfaces including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes, fine steel wool, scrappers and sand paper, scaffolding etc. complete | 211.2 | Smt | |
| 65 | 7.5 | Providing and applying two coats of flat oil paint of approved colour to the old structural steel work and iron work previously painted in building including scaffolding, if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete. | 211.2 | Smt | |
| 66 | 7.6 | Providing and laying in trenches 15 mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.\n | 348 | Rmt | |
| 67 | 7.7 | Providing and laying in trenches 25 mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. | 206 | Rmt | |
| 68 | 7.8 | Providing and laying in trenches 50mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete | 225 | Rmt | |
| 69 | 7.9 | Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. | 20 | Nos | |
| 70 | 8 | Providing and fixing 25 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. | 15 | Nos | |
| 71 | 8.1 | Providing and fixing screw down for 50 mm dia. wheeled stop tap of brass including necessary sockets/ union nut complete. | 10 | Nos | |
| 72 | 8.2 | Providing and fixing C.P. BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete.\n | 43 | Nos | |
| 73 | 8.3 | Providing and fixing C.P. wall mixer with provision for overhead shower with 115mm long bend pipe and wall flange of approved make including necessary sockets/union nut etc. complete | 11 | Nos | |
| 74 | 8.4 | Providing and fixing 100 mm dia. chromium plated brass showers rose to 15mm dia. supply pipe including necessary bend and socket complete | 11 | Nos | |
| 75 | 8.5 | Providing and fixing push valve concealed type with cover plate 32mm size of approved make including necessary fitting, fixtures, sockets/union nut etc. complete | 11 | Nos | |
| 76 | 8.6 | Providing and fixing C.P. pillar cock long neck with aerator of approed make including necessary sockets/union nut etc. complete.\n | 11 | Nos | |
| 77 | 8.7 | Providing and fixing Angle cock of approved make including necessary fittings, fixtures, sockets/union nut etc. complete.\n | 44 | Nos | |
| 78 | 8.8 | Providing and Fixing half turn 25 mm dia gun metal flushing cock including all accessories etc. complete. | |||
| 79 | 8.9 | Providing and fixing chromium plated towel rod 16 mm dia and 75 cm. in length including all accessories complete. | 38 | Nos | |
| 80 | 9 | Providing and fixing 10 cm PVC nahani trap with grating etc. complete | 37 | Nos | |
| 81 | 9.1 | Providing and fixing 450mm. x 550mm. size approved quality mirror with fixtures and fastenings etc. complete. Additional Item. Spec. No. As directed by Engineer in charge. | 52 | Nos | |
| 82 | 9.2 | Providing and fixing European type white glazed\nearthenware Water Closet with siphonic trap with siphonic low level 10 litres UPVC cistern with black Bakelite seat and lid with chromium plated brass hinges including UPVC soil and vent pipe upto the outside face of wall including 100 mm dia. UPVC plug bend, inlet pipe, stop tap etc. all fittings, cutting and making good to the walls and floors, testing etc. complete. (Prior approval of sample and brand by Ex. Engineer is necessary before use.) | 1 | Nos | |
| 83 | 9.3 | Providing and fixing European type wall-hung white water closet of approved make with push valve concealed type with cover plate 32mm size of approved make including soil pipe, vent pipe up to\noutside face of wall ,100mm dia. G.I. plug bend inlet pipe all fittings, cuttingand making good walls, floors etc. complete.\n | 10 | Nos | |
| 84 | 9.4 | Providing and fixing 1st class white glazed earthenware \"Orissa type\" W.C. Pan 600 x 400 mm size including \"P\" or \"S\" trap UPVC soil and vent pipe upto the outside face of the wall, 1:5:10 cement concrete beadding, without flushing cistern with flush cock and cock and necessary fittings, painting of the exposed pipe and cutting and making good walls and floor, testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use. | |||
| 85 | 9.5 | Providing and fixing White Glazed Earthenware semi stall type Urinal without cistern, with inlet pipes stop tap. UPVC flush pipe with fittings and flushing arrangement including UPVC soil pipe, UPVC trap and soil pipe connection upto outside face of wall, making good the damaged surface, testing etc. complete. (Prior approval of sample and brand by Ex. Engineer is necessary before use) Spec. No. : As directed by Engineer in charge. | 1 | Nos | |
| 86 | 9.6 | Providing and fixing white glazed earthenware Wash Hand Basin of Size 55 x 40 cm. including pillar tap, brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including UPVC waste pipe and UPVC bottle trap upto the outside face of the wall making good damaged surface, testing etc. complete. Spec. No. : Bd.V.30 Page No. 565 | 13 | Nos | |
| 87 | 9.7 | Providing, laying and fixing P.V.C. pipe of 40mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.\n | 130 | Rmt | |
| 88 | 9.8 | Providing and fixing 75mm dia meter UPVC soil/vent/waste/SWR pipe/Rain water pipes of required dia meter conforming to IS-13592 and IS-4985 to with stand 2.50 Kg/cm2 including necessary fixture and fittings such as bends tees, single junction, double and joining with rubber and lubricants on wall by means of clips or in ground including necessary excavation, laying filling trenches, testing etc. complete. | 175 | Rmt | |
| 89 | 9.9 | Providing and fixing 110 mm dia UPVC soil / vent / waste SWR pipe of required diameter conforming to I.S.-13592, and I.S.- 4985 to withstand continuous internal hydraulic pressure of 2.5 kg / cm2 including necessary fixtures and fittings, such as bends, tees, single junctions, double junctions and joining with rubber rings and lubricants, on wall by means of clips or in ground including necessary excavation, laying refilling, trench testing etc. complete. (Prior approval of sample and brand by Exe. Engineer is necessary before use.) Spec. No.: As directed by Engineer-in- charge. | 440 | Rmt | |
| 90 | 10 | Providing and fixing 160 mm dia UPVC soil / vent / wasteSWR pipe of required diameter conforming to I.S.-13592and I.S.- 4985 to withstand continuous internal hydraulicpressure of 2.5 kg / cm2 including necessary fixtures andfittings, such as bends, tees, single junctions, doublejunctions and joining with rubber rings and lubricants, onwall by means of clips or in ground including necessaryexcavation, laying refilling, trench testing etc. complete.(Prior approval of sample and brand by Exe. Engineer isnecessary before use.) Spec. No.: As directed by Engineerin-charge. | 590 | Rmt | |
| 91 | 10.1 | Providing, hoisting and fixing in position Sintex or equivalentHigh Density Poly Ethylene UV stabilised conformingtoIS-12701; water storage tank with necessary connection,testing etc. complete. (Prior approval of sample by Exe.Engineer is necessary before use.) Spec. No.: As directed\nby Engineer-in- charge. | |||
| 92 | 10.2 | Providing and constructing Brick Masonry Inspection Chamber 60cm x45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete. | 8 | Nos | |
| 93 | 10.3 | Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete. | 8 | Nos | |
| 94 | 10.4 | Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick-bats. | 2 | Nos | |
| 95 | 10.5 | Providing and fixing 45 cm wide mild steel ladder of 40mm x 6 mm mild steel flat stringers and steps of 18 mm dia. mild steel bar for water tank including fixing it in (1:2:4) M-15 cement concrete block 60cm x 30cm x 30cm and painting the ladder complete. (Anti Corossive Paint)\n | 2 | Rmt | |
| 96 | 10.6 | Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with pproved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag | 532 | Smt | |
| 97 | 10.7 | including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete. | |||
| 98 | 10.8 | Providing and fixing Polycarbonate sheet of 80mm thick of approved shade for roofing including necessory MS framing work with 2 coats of oil paint fastning with galonised /iron screw /bolt and including all transportation, lead / lift, fitting etc as per detailed complet | 2.5 | Smt | |
| 99 | 10.9 | Royalty | 6.5 | Cmt | |
| 100 | 11 | Tests (Separate sheet attached) | 1 | NOS | |
| 101 | 11.1 | SUB WORK 2 - FURNITURE WORK | |||
| 102 | 11.2 | Providing, fixing & altering the existing MS BED (3'x6') with 18 mm marine plywood finishing with 1 mm S finish woodgrain laminate confirming to (ISI2046), including BTC liping, necessory hardware viz. screw, nails, fevicol etc as per detailed design & specifications including transportation, labour, finishing / polishing etc complete. | 30 | Nos | |
| 103 | 11.3 | Providing, & manufacturing SIDE TABLE of size 0.6 X 0.45 X 0.45 m with 18 mm marine plywood for frame, shelves, shutter etc, outer finishing with 1 mm S finish woodgrain laminate confirming to (ISI2046) including BTC liping, necessory hardware viz. Hinges, handle, screw, nails, fevicol etc as per detailed design & specifications including transportation, labour, finishing / polishing etc complete. | 30 | Nos | |
| 104 | 11.4 | Providing, & manufacturing WARDROBE of size 1.5 X 2.1 X 0.6 m with 18 mm marine plywood for frame, shelves, shutter etc, outer finishing with 1 mm S finish woodgrain laminate confirming to (ISI2046) & inside 0.8mm laminate Egg white, including BTC liping, necessory hardware viz. Hinges, handle, screw, nails, fevicol etc as per detailed design & specifications including transportation, labour, finishing / polishing etc complete. | 10 | Nos | |
| 105 | 11.5 | Providing, & manufacturing WARDROBE of size 0.9 X 2.1 X 0.6 m with 18 mm marine plywood for frame, shelves, shutter etc, outer finishing with 1 mm S finish woodgrain laminate confirming to (ISI2046) & inside 0.8mm laminate Egg white, including BTC liping, necessory hardware viz. Hinges, handle, screw, nails, fevicol etc as per detailed design & specifications including transportation, labour, finishing / polishing etc complete. | |||
| 106 | 11.6 | Providing, & manufacturing DRESING TABLE with platform of size 0.45 X 1.50 m with 18 mm marine plywood for platform,finishing with 1 mm S finish woodgrain laminate confirming to (ISI2046) & for back of mirror 12 mm marine plywood, including BTC liping, necessory hardware viz. screw, nails, fevicol etc as per detailed design & specifications including transportation, labour, finishing / polishing etc complete. | |||
| 107 | 11.7 | Providing, & manufacturing DRESING TABLE with drawer of size 0.60 X 1.50 m with 18 mm marine plywood for platform,finishing with 1 mm S finish woodgrain laminate confirming to (ISI2046) & for back of mirror 12 mm marine plywood, including BTC liping, necessory hardware viz. screw, nails, fevicol etc as per detailed design & specifications including transportation, labour, finishing / polishing etc complete. | 10 | Nos | |
| 108 | 11.8 | Providing, fixing & altering the existing FLUSH DOORS (3'x6') with 6 mm marine plywood both side finishing with 1 mm S finish woodgrain laminate confirming to (ISI2046), including BTC liping, necessory hardware viz. screw, nails, door kit, hinges, fevicol etc as per detailed design & specifications including transportation, labour, finishing / polishing etc complete. | 30 | Nos | |
| 109 | 11.9 | Providing & fixing stitched curtains for window as per given instructions including necessory hardware viz. curtain rod, Brackets for rod, screw, nails etc including stitching curtain, fitting at specified location, other labour, transpotation etc complete. | 84 | Rmt | |
| 110 | 12 | Supliying of fibre chairs with arms of standard make like neelkamal or equivalant with prior approval of sample from Engineer incharge including Transportation etc complete. | 20 | Nos | |
| 111 | 12.1 | Providing & makiing the cushions for existing Sofa Set (2 single + 1 three seater) with standard make 4\" & 3\" , 50 density foams with inner fixed cover & outer decorative cloth removable cover with zip including transportation, making, stitching & supply to directed place complete. samples of material as approved by Architect & Engineer incharge | 10 | Nos | |
| 112 | 12.2 | Providing & supplying/ manufacturing the decorative Center Table of size 0.9X0.6 m of wooden/ ply frames & top with 8 mm glass as per detail design including labour, material, transportation to directed place complete | 10 | Nos | |
| 113 | 12.3 | Providing, & manufacturing TV Unit with drawer of size 2.45x2.45m with 18 mm marine plywood for back panel, platform,finishing with 1 mm S finish woodgrain laminate confirming to (ISI2046) & including BTC liping, necessory hardware viz. screw, nails, fevicol etc as per detailed design & specifications including transportation, labour, finishing / polishing etc complete. | 10 | Nos | |
| 114 | 12.4 | Providing & fixing 5 mm carpet for floor including including transportation, fitting, finishing etc complete. samples of material as approved by Architect & Engineer incharge | 319 | Smt | |
| 115 | 12.5 | SUB WORK 3 - Electrical Work | |||
| 116 | 12.6 | Supplying and erecting UPVC reinforced flexible conduit 25 mm in dia. conforming to I.S. and approved make with required number of couplings, PVC bushes, check nuts etc. complete. (1-2-2) | 140 | Mtr | |
| 117 | 12.7 | Supplying and erecting PVC trunking (PVC casing-ncapping) of size 32 mm with accessories on wall/ceiling as per specification No: WG-MA/CON, para no. 1.1.2 (1-2-11) | 365 | Mtr | |
| 118 | 12.8 | Supplying and erecting HMS PVC conduit 20 mm dia.with PVC accessories on wall / ceiling as per specification No: WG-MA/CON.(1-2-6) | 370 | Mtr | |
| 119 | 12.9 | Supplying and erecting HMS PVC conduit 25 mm dia. with PVC accessories on wall /ceiling as per specification No: WG-MA/CON.(1-2-7) | 165 | Mtr | |
| 120 | 13 | Supplying & erecting mains with 2x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW (1-3-1) | 1080 | Mtr | |
| 121 | 13.1 | Supplying & erecting mains with 1x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW (1-3-2) | 170 | Mtr | |
| 122 | 13.2 | Supplying & erecting mains with 2x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/\nBW(1-3-3) | 605 | Mtr | |
| 123 | 13.3 | Supplying & erecting mains with 2x4 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW (1-3-5) | 230 | Mtr | |
| 124 | 13.4 | Supplying and erecting ISI mark Ceiling rose / Batten holder / Slanting holder / hanging cord switch / hanging bell push / pendent holder bakelite base 6A. erected on Filled polypropylene ISI marked (IS:14772-2000) board or polished double wooden block/ ISI mark PVC junction box. (1-7-7) | 56 | Each | |
| 125 | 13.5 | Supplying and erecting modular type switch 6A / 10A ISI mark approved make duly erected on provided plate and box with wiring connections complete. (1-8-1) | 259 | Each | |
| 126 | 13.6 | Supplying and erecting modular type switch 16A ISI mark approved make duly erected on provided plate and box with wiring connections complete. (1-8-2) | 43 | Each | |
| 127 | 13.7 | Supplying and erecting modular type 3 pin 6A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete. (1-8-10) | 78 | Each | |
| 128 | 13.8 | Supplying and erecting modular type telephone socket two gang with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete. (1-8-16) | |||
| 129 | 13.9 | Supplying and erecting modular type computer Jack RJ 45 with safety shutter ISI mark approved make duly erected on provided plate and box with wiring onnections complete.(1-8-17) | |||
| 130 | 14 | Supplying and erecting modular type electronic step regulator for fan two module ISI mark approved make duly erected on provided plate and box with wiring connections complete. (1-8-23) | 30 | Each | |
| 131 | 14.1 | Supplying and erecting modular type blanking plate one module ISI mark approved make duly erected on provided plate & box. (1-8-24) | 40 | Each | |
| 132 | 14.2 | Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete. (1-8-11) | 20 | Each | |
| 133 | 14.3 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.. (1-8-34 ) | 52 | Each | |
| 134 | 14.4 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.. (1-8-35 ) | 38 | Each | |
| 135 | 14.5 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 4 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.. (1-8-37) | 5 | Each | |
| 136 | 14.6 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.. (1-8-38 ) | 20 | Each | |
| 137 | 14.7 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 8 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.. (1-8-39 ) | 8 | Each | |
| 138 | 14.8 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.. (1-8-40 ) | 4 | Each | |
| 139 | 14.9 | Point wiring in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FR grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW (1-9-25) | 221 | Point | |
| 140 | 15 | wiring for plug on board with Modular Switch Socket with copper wiring and earthing as per specification No. WG-PW/SW. (1-9-13) | 126 | Point | |
| 141 | 15.1 | Supplying & erecting telephone copper cable 4 pair with 0.5 mm dia. laid in provided PVC casing capping / conduit as per specification No. WG-TW (1-10-3) | 5 | Mtr | |
| 142 | 15.2 | Supplying and erecting square / round shaped CRCA /diecast aluminium powder coated housing LED Panel ( slim edge-lit) light suitable for 18W with provision for plane front frame with translucent cover fixed to the housing complete.(2-1-8) | 10 | Each | |
| 143 | 15.3 | Supplying & erecting LED 18W tube light fitting (4 feet) with polycarbonate housing, heat sink, integrated HF electronic driver complete (2-1-22) | 47 | Each | |
| 144 | 15.4 | Supplying and Erecting LED Flood light fitting of 90-100W, including lamp, with PF > 0.95, class IP 65 and above Housing of pressure die cast alluminium alloy and heat sink extruded alluminium complete per specification No FGODF/ FLS-2 (2-5-15) | |||
| 145 | 15.5 | Supplying and erecting LED Street light fitting suitable for above 25W lamp, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No . FGODF/\nFLS2. (2-5-4) | 4 | Each | |
| 146 | 15.6 | Supplying and erecting LED Street light fitting suitable for above 48W lamp, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No . FGODF/\nFLS2. (2-5-4) | |||
| 147 | 15.7 | Supplying and erecting fan clamp of 30 x 5 mm. M.S. flat of required length and 10 mm. M.S. bolt and nuts erected with necessary hook of 10 mm. M.S. round bar and painted. (2-13-3) | 30 | Each | |
| 148 | 15.8 | Supplying and erecting fan hook of 10 mm. M.S. round bar grouted in RCC slab with making the site as original. (2-13-4) | 30 | Each | |
| 149 | 15.9 | Supplying and erecting ‘B’ grade G.I. pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire. (2-13-6) | |||
| 150 | 16 | Supplying and erecting Five Star Rated Energy Saving Ceiling Fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specifcation no. FG-FN/CF (2-12-21) | 30 | Each | |
| 151 | 16.1 | Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‘E’ class insulation. (2-12-15) | 21 | Each | |
| 152 | 16.2 | Supplying, installing, testing and commissioning of 800 VA to 900 VA Digital pure sine wave inverter based on Insulated Gate Bipolar Transistor (IGBT) technology single phase 230V,50 Hz complete as per specification no. APINV (Without batteries) (3-6-2) | |||
| 153 | 16.3 | Supplying and erecting 12 V/150AH TUBULAR Battery with battery terminal wire, duly charged complete with 36 months warranty complete (3-8-4) | |||
| 154 | 16.4 | Supplying and erecting quartz electronic time switch having 24 hour dial to work on 250 V 50 cycle AC having built in rechargeable nickel cadmium batteries to run the time switch on failure of supply having switch contact rating upto 16A to use independently or in conjunction with contactor (4-4-1) | |||
| 155 | 16.5 | Supplying and erecting four pole power contactor 430 V, 40 A for time switch complete erected on provided wooden block/ box, with necessary materials.(4-4-5) | |||
| 156 | 16.6 | Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification No. SW-SWR/MCB (5-3-3) | 40 | Each | |
| 157 | 16.7 | Supplying, erecting & marking DPMCB 6 A to 32 A Bseries (for lighting) in provided distribution board as per specification no. SW-SWR/MCB (5-3-7) | 5 | Each | |
| 158 | 16.8 | Supplying, erecting & marking FPMCB 6A to 32A in\nprovided distribution board as per specification No. SWSWR/ MCB (5-3-16) | 6 | Each | |
| 159 | 16.9 | Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted suitable for 3 pole MCCB as incomer & outgoing SP MCB (24 poles) or TP MCB of 8 ways (34 poles) , on iron/ GI frame. (vertical busbar type) as\nper specification no. SW-SWR/MCBDB1 (5-4-27) | 2 | Each | |
| 160 | 17 | Supplying and erecting single pole and neutral distribution board (SPNDB) surface/flush mounted with 2 ways for incoming and 6 ways for outgoing SP MCB’s on iron/ GI frame as per specification no. SW-R/MCBDB (5-4-15) | 5 | Each | |
| 161 | 17.1 | Providing & erecting 3 Pole MCCB upto 100A, 415V, with short circuit rating 25 kA (Ics=100% of Icu ),adjustable thermal (overload) setting and fixed magnetic setting with provided leads,provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB (5-5-1)Note:- 1) For use of 4pole MCCB in place of 3pole MCCB add 20% in overall rate of 3 pole MCCB. | 2 | Each | |
| 162 | 17.2 | Supplying and erecting blanking plate of suitable size on MCB DB complete (5-4-24) | 6 | Each | |
| 163 | 17.3 | Supplying and erecting GI sheet 1.6mm (16 SWG) caution board of size 250 x 200 mm duly painted with red oxide and enamel paint in Marathi and Hindi erected at position for HV/EHV installation. (6-1-16) | 2 | Each | |
| 164 | 17.4 | Supplying and erecting Iron, sheet metal work consisting of CRCA Sheets, Various sections of iron, Plates, Chequered Plates, Rods, Bars, MS pipes, etc. for panel board or any other purposes complete with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority (6-1-19) | 10 | kgs | |
| 165 | 17.5 | Supplying & erecting LED type indicating pilot lamp\nwith LED colours Red / Yellow / Green, 230 / 250V on provided box / panel with necessary material, wiring & connections etc. (6-5-7) | 6 | Each | |
| 166 | 17.6 | Supplying and erecting 525 V 3 phase, 50 Hz., MPP type capacitor having minimum overcurrent capacity of 1.8 In, peak inrush current capacity 300 In and minimum life 150000 hours kVAr bank of all polypropylene condensers (APP) with the standard capacities of 2,3, 5, 7, 10, 12.5 and 15 kVAr units of P.F. correction for operation on 3 phase 50 Hz. with externally discharging resistances, earthing terminals and built on angle iron or channel iron frame work and provided with terminal cover box complete erected on provided iron bracket or on floor duly tested by licensee.(6-5-4) | 5 | KVAR | |
| 167 | 17.7 | Supplying and erecting marine plywood 18/19 mm thick fixed to wall or on provided panel board with necessary materials such as screws, wall fasteners, supports, nut bolts etc. complete.(6-1-14) | 1 | Sq mtr | |
| 168 | 17.8 | Supplying, erecting & terminating XLPE armoured cable 4 core 6 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/trusses/pole or laid in provided trench/ pipe as per specification no.CB-LT/AL(7-1-27) | 50 | Mtr | |
| 169 | 17.9 | Supplying, erecting & terminating XLPE armoured cable 3½ core 25 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on\nwall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (7-1-15) | 40 | Mtr | |
| 170 | 18 | Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. (7-6-9) | 25 | Mtr | |
| 171 | 18.1 | Supplying & erecting Siemens type brass cable glands for 3 to 4 core 16 sq. mm. /3 to 4 core 25 sq. mm. /3 core 35 sq. mm. for XLPE armoured cable as per specification no. CB-GL(7-7-3) | 20 | Each | |
| 172 | 18.2 | Supplying & erecting FRP box of size 250mm x 200mm x 100 mm, 2.7 mm thick complete on pole/wall as per specification No. CB-SB (7-8-9) | 6 | Each | |
| 173 | 18.3 | Supplying & erecting crimping type aluminium lugs for cable upto 16 sq mm complete as per specification No. CB-CL/AL (7-10-1) | 20 | Each | |
| 174 | 18.4 | Providing earthing with Galvanized cast iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification No. EA-EP (9-1-1) | 2 | Each | |
| 175 | 18.5 | Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification no. EAEP (9-1-4) | |||
| 176 | 18.6 | Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification No EA-EP. (9-2-3) | 5 | kgs | |
| 177 | 18.7 | Supplying and erecting ISI mark GI pipe 40 mm dia.‘B’ class at position with accessories complete. Specification no. CW-PLB/GP. (16-5-5) | 20 | Mtr | |
| 178 | 18.8 | SITC of Electric Traction Passenger Lift with\n• Rated capacity :- 4 Passenger/272Kg\n• Floors :- G+2 floor (3Stops/3 Landings)\n• Travel :- 3 to 4.2 mtrs\n• Location of Lift Machine:- MR/MRL\n• Rated speed :- 1.0mps VS\n• Doors type :- COPO/TOPO Doors with frame having clear opening of 700/800 mm wide x 2000 mm high made from SS 304 grade sheet of 1.5mm, thick in hairline finish for car and all landing doors with SS door architraves/frames\n• Lift car enclosure made from SS 304 grade sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights,\nblower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc.\n• COP with SS face plate having metallic push buttons with Braille Code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with / without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, | 1 | Each | |
| 179 | 18.9 | LMR & FCC/ground floor \n• Clear Car size of ......mm wide x ......mm deep x ......mm high\n• LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille Code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings\n• Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port, control panel duly wired with proper size & strength copper wire for power & control circuit, with provision for addition of floor / control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class\n• ARD complete with necessary SMF VRLA batteries\n• Fireman controller having fireman switch at fire Landing,\n• CCTV surveillance system comprises of 2nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller | |||
| 180 | 19 | with NVR kept in LMR/FCC with HDR data backup for 60 days with 18\" FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge.\n• Lift Machine of Gearless PMSM of suitable kW with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire\nropes/belts of adequate size & strength\n• Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work\nJob 979384 173164 1152548252\n• Minor civil work for alteration if any and erection of door frames and accessories, erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails fixing of girders for mounting lift machine etc. complete as per specification no. LFT.\n | |||
| 181 | 19.1 | • Lift shaft available having clear size of ......mm wide x\n......mm deep, ......mm Pit depth, ….mm overhead. |
AI Tender Summary
Tender Timeline
Aug 26, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedSep 09, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 12, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender