| 1 | 1 | Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, pillasters etc complete all as spd and directed by Engr-in-Charge | BI01010001010000000000000515BI0100001112 | 10 | Cum |
|---|
| 2 | 1.01 | M&L for brick work with sub class 'B' bricks , straight or curved on plan exc. 6 m mean radius built in CM 1:6 complete all as specified and directed by Engr-in-Charge | BI01010001010000000000000515BI0100001113 | 7 | Cum |
|---|
| 3 | 1.02 | Description same all as per item No 1.01 above but, except brick using old retrieved bricks obtained from demolition in serviceable conditions complete all as specified and directed by Engr-in-Charge | BI01010001010000000000000515BI0100001114 | 3 | Cum |
|---|
| 4 | 1.03 | M&L for 15mm thick rendering fair/ other than fare face of brick/stone masonry walls in CM 1:6 finished complete all as specified and directed by Engr-in-Charge | BI01010001010000000000000515BI0100001115 | 550 | sqm |
|---|
| 5 | 1.04 | M & L preparation of new surface and applying two coat of Apex paint over a coat of primer on external wall all as spd & dir by Engr-in-Charge | BI01010001010000000000000515BI0100001116 | 275 | sqm |
|---|
| 6 | 1.05 | M & L for preparing new plastered or unplastered surfaces of walls and applying two coat of cement base paint, white or tinted complete all as specified and directed. | BI01010001010000000000000515BI0100001117 | 200 | Sqm |
|---|
| 7 | 2 | Demolition stone slabs and tiles ( any type) , Kota stone of any description or thickness in floors, walls laid bedded and pointed in any mortar complete all as specified and directed. | BI01010001010000000000000515BI0100001118 | 15 | X Sqm |
|---|
| 8 | 3 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified. | BI01010001010000000000000515BI0100001119 | 100 | Sqm |
|---|
| 9 | 4 | Demolition of cement concrete ( unreinforced)/Tiles in ground floors and pavings n. exc 15 cm thick below or above ground level and removing the demolished material to a distance exc 500 m but not exceeding 1.5 km and depositing where directed, complete all as specified and directed by Engr-in-Charge | BI01010001010000000000000515BI0100001120 | 9 | Cum |
|---|
| 10 | 5 | M & L for cement concrete 25mm thick 1:2:4 (12.5mm graded aggregate) type B-0. as in sub base all as specified and directed by Engr-in-Charge | BI01010001010000000000000515BI0100001121 | 150 | Sqm |
|---|
| 11 | 6 | M&L for 10 mm thick screed bed or bedding in layer of mortar for laying floor finishes in cement plaster 1:4 complete all as specified and directed by Engr-in-Charge. | BI01010001010000000000000515BI0100001122 | 150 | Sqm |
|---|
| 12 | 7 | M & L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed by Engr-in-Charge. | BI01010001010000000000000515BI0100001123 | 100 | sqm |
|---|
| 13 | 8 | M&L for 10mm thick joint less vitrified ceramic tiles (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed. | BI01010001010000000000000515BI0100001124 | 100 | Sqm |
|---|
| 14 | 8.01 | Description same as per item no.8 above but as in skirting/dado including jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles complete all as specified and directed. | BI01010001010000000000000515BI0100001125 | 20 | Sqm |
|---|
| 15 | 8.02 | M&L for non skid joint free white ceramic tiles 7-8mm thick (Square/Rectunglar), area of each tiles exc 0.11 Sqm but not exc 0.18 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles complete all as specified and directed. | BI01010001010000000000000515BI0100001126 | 100 | Sqm |
|---|
| 16 | 8.03 | M&L for joint free coloured glazed ceramic tiles in vertical surface 350x250x7mm / 450x350x7mm set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles complete all as specified and directed. | BI01010001010000000000000515BI0100001127 | 80 | Sqm |
|---|
| 17 | 9 | M&L 16 to 18 mm thick colour Granite work as in platform pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade all as specified and directed by Engineer-in-Charge. | BI01010001010000000000000515BI0100001128 | 50 | Sqm |
|---|
| 18 | 10 | Dismantling wall and ceiling boards (fibre, pvc, particale board ,pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness and any description including , including cover fillets and removing of all waste materials from site, all complete all as specified. | BI01010001010000000000000515BI0100001129 | 800 | Sqm |
|---|
| 19 | 11 | S & F solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent and fixing at site on PVC frame all as specified and directed by Engineer-in-Charge. | BI01010001010000000000000515BI0100001130 | 300 | Sqm |
|---|
| 20 | 12 | M & L for 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing all as directed by Engineer-in-Charge. | BI01010001010000000000000515BI0100001131 | 600 | RM |
|---|
| 21 | 13 | S&F wall panelling with 12 mm thick prelaminated particle board , interior grade , one side balancing white fixed with screws to GI frame work of 1.25 mm GI sheet channels (50mmx50mm) in both direction at 600 mm distance fixed with screws and rawl plugs over the walls (600mmx600mm GI channel grid), grid gap filled with and including 25 mm bonded mineral glass wool blanket having density 48 kg/Cum including stainless steel beading for joints of boards and fixed as per manufacturer's instructions complete all as specified and directed. | BI01010001010000000000000515BI0100001132 | 100 | Sqm |
|---|
| 22 | 14 | S&F in repair MS galvanised powder coated suspended false ceiling system with grid of size 600mm x 600mm; consisting of MS galvanised powder coated main runner (39mm x 29mm x 0.8mm size), cross tee (39mm x 27 .7mm x 0.80mm size) and wall angle (22.2mm x 22.2mm x 0.65mm size) respectively suspended with 4 mm dia GI wire hanger fixed with steel dash fasteners or from purlin of roof with butterfly clips, etc complete all as specified and directed. | BI01010001010000000000000515BI0100001133 | 400 | Sqm |
|---|
| 23 | 15 | S&F in repair 4mm thick HPSC pre-prime non asbestos fibre cement building board (E-classic ) decorative finish fixed to aluminim or powder coated MS snap grid frame work with hold down clips in ceiling complete all as specified and directed. | BI01010001010000000000000515BI0100001134 | 200 | Sqm |
|---|
| 24 | 16 | S&F in repair gypsum board ( Semi Perforated) in ceiling fixed to GI snap grid frame work with hold screws as per manufacturer's instructions , including preparing new surfaces in ceiling and applying two coats of oil emulsion distemper over a coat of primer, complete all as specified and directed. | BI01010001010000000000000515BI0100001135 | 200 | sqm |
|---|
| 25 | 17 | Dismantling water tanks capacity exc 500 & n.exc 1000 ltr capacity and removing to stores all as specified and directed. | BI01010001010000000000000515BI0100001136 | 4 | Each |
|---|
| 26 | 18 | S & F in repair rotational moulded poly urethane water storage tanks of capacity 500ltr (cylindrical vertical with closed top) hoisted and fixed in position all as specifeid and directed | BI01010001010000000000000515BI0100001137 | 2 | Each |
|---|
| 27 | 19 | S & F in repair rotational moulded poly urethane water storage tanks of capacity 1000ltr (cylindrical vertical with closed top) hoisted and fixed in position all as specifeid and directed | BI01010001010000000000000515BI0100001138 | 2 | Each |
|---|
| 28 | 20 | Cleaning and removing all scale dirt etc. from water tanks and from mouth of circulating pipes etc. and writing the date of cleaning and due date for cleaning of tank, capacity of tanks exc. 500 liters and not exc. 1000 liters complete all as specified and as directed. | BI01010001010000000000000515BI0100001139 | 100 | Each |
|---|
| 29 | 21 | S&F in repair float valve/ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe ( Min. wt. 20 mm -210 gms ) suitable for 20 mm dia Pipe complete all as specified and directed. | BI01010001010000000000000515BI0100001140 | 25 | Each |
|---|
| 30 | 22 | S&F in repair for gun metal, globe or gate valves, with iron wheel head , screwed both ends for iron pipe of bore 20mm and fixed complete all as specified and directed. | BI01010001010000000000000515BI0100001141 | 5 | Each |
|---|
| 31 | 23 | Taking down 15 mm bore steel water tubing and connection from wall and floor including cleaning for refixing or removal from site complete all as specified and as directed. | BI01010001010000000000000515BI0100001142 | 45 | RM |
|---|
| 32 | 24 | Refixing 15 mm bore steel water tubing and connection (obtained from item No. 10) in new or old position in walls, ceiling, floors etc) and making good all disturbed surfaces of walls, floor, roof, complete all as specified and directed. | BI01010001010000000000000515BI0100001143 | 15 | RM |
|---|
| 33 | 25 | S&F 15 mm bore medium grade steel water tubing and connection with all fittings to walls ceilings or laid in floors including making good disturbed surfraces of wall, floor roof complete all as specified and directed. | BI01010001010000000000000515BI0100001144 | 30 | RM |
|---|
| 34 | 26 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n'exc 4 Sqm each complete all as specified and directed. | BI01010001010000000000000515BI0100001145 | 10 | Each |
|---|
| 35 | 27 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) n. exc 1.5 Sqm each including iron mongories complete all as specified and directed. | BI01010001010000000000000515BI0100001146 | 10 | Each |
|---|
| 36 | 28 | S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS Square tube complete all as specified and directed. | BI01010001010000000000000515BI0100001147 | 10 | RM |
|---|
| 37 | 29 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for styles and plain colour PVC sheet for top rail ,lock rail & bottom rail on either sides and as gap insert for top rail & bottom rail ,panelling of plain colour PVC sheet to be fitted in the MS frame welded -sealed to the styles & rails with suitable PVC sheet beading,and joint together with solvent cement complete all as specified and directed. | BI01010001010000000000000515BI0100001148 | 5 | Sqm |
|---|
| 38 | 30 | S&F including fabrication of aluminium powder coated having minimum thickness of powder coating 50 micron for door/window/ventilator frame , shutters & partition including necessary jointing cleats, glazing clips, aluminium snap beading, rubber neoprene gasket, screws, dash fasteners, rawl plug for fixing of screw in wall or floor etc. aluminium sections as approved by GE complete all as specified and directed.\nNote :- (i) Builders hardware shall be measured and paid separately under respective items.\n(ii) Only weight of aluminium sections shall be measured and paid. No claim what so ever shall be entertained on this account.\n(iii) Thickness of section shall not be more than 2mm. | BI01010001010000000000000515BI0100001149 | 150 | Kg |
|---|
| 39 | 31 | S&F 5mm thick tinted glass fixed with necessary rubber gasket and aluminium snap beadings tint match with existing complete all as specified and directed. | BI01010001010000000000000515BI0100001150 | 10 | Sqm |
|---|
| 40 | 32 | S&F 125 mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C21 complete all as directed and specified | BI01010001010000000000000515BI0100001151 | 45 | Each |
|---|
| 41 | 33 | Cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in CM 1:3 or cement conc 1:2:4 type B1 as required exc half brick but not exc full brick wall complete all as directed and specified | BI01010001010000000000000515BI0100001152 | 20 | Each |
|---|
| 42 | 34 | S&F for 150 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as directed and specified | BI01010001010000000000000515BI0100001153 | 12 | Each |
|---|
| 43 | 35 | S&F for 150 mm long aluminium handles, cast type, anodised complete all as directed and specified | BI01010001010000000000000515BI0100001154 | 24 | Each |
|---|
| 44 | 36 | S&F for 200 mm long aluminium alloy, anodised, sliding door bolt with hasp, staples(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or csat aluminium alloy complete all as directed and specified | BI01010001010000000000000515BI0100001155 | 12 | Each |
|---|
| 45 | 37 | S&F in repair cast iron body, door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed. | BI01010001010000000000000515BI0100001156 | 3 | Each |
|---|
| 46 | 38 | Supply only double action floor spring hydaulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, govering pivot , other parts made of mild steel heavy duty complete all as specified and directed. | BI01010001010000000000000515BI0100001157 | 2 | Each |
|---|
| 47 | 39 | Hacking out old bvroken glass pane(any thickness, size, quality or descriptionh ) from wooden frames or steel, concrete or brick surrounds glazed with putty or fixed with beqads etc all as specified and directed | BI01010001010000000000000515BI0100001158 | 100 | Sqm |
|---|
| 48 | 40 | S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in squre n exc 0.50 Sqm in each pane complete all as specified and directed. | BI01010001010000000000000515BI0100001159 | 70 | Sqm |
|---|
| 49 | 41 | Ditto as per item No 40 above but exc 0.50 Sqm in each pane complete all as specified and directed | BI01010001010000000000000515BI0100001160 | 30 | Sqm |
|---|
| 50 | 42 | M&L for Preparation of old decorated surfaces of wall including cornices, plastered or unplastered surfaces by brooming down or steel wire brushing to remove dust, dirt and loose scales of lime wash and other foreign material, scrapping down, smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc and applying one coat of white wash complete all as specified and directed. | BI01010001010000000000000515BI0100001161 | 100 | Sqm |
|---|
| 51 | 43 | M&L for Preparation of old decorated surfaces of ceilings including cornices, plastered or unplastered surfaces by brooming down or steel wire brushing to remove dust, dirt and loose scales of lime wash and other foreign material, scrapping down, smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc and applying one coat of white wash complete all as specified and directed. | BI01010001010000000000000515BI0100001162 | 100 | Sqm |
|---|
| 52 | 44 | M&L for Preparation of old surface include brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of distemper oil emulsion white or tinted as approved complete all as specified and directed. | BI01010001010000000000000515BI0100001163 | 100 | Sqm |
|---|
| 53 | 45 | M&L for Preparation of old distempered ceiling surface of AC building board, etc in aluminium snap grid frame work and applying one coat of distemper oil emulsion, white or tinted (without painting aluminium portion) of approved tint complete all as specified and directed. | BI01010001010000000000000515BI0100001164 | 100 | Sqm |
|---|
| 54 | 46 | M&L for Preparing old painted surfaces of wood and wood based materials of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. | BI01010001010000000000000515BI0100001165 | 100 | Sqm |
|---|
| 55 | 47 | M&L for Preparing old painted steel & iron surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. | BI01010001010000000000000515BI0100001166 | 100 | Sqm |
|---|
| 56 | 48 | M&L for Preparing old decorated plastered or unplastered surfaces of walls and applying one coat of cement base paint, white or tinted as approved complete all as specified and directed. | BI01010001010000000000000515BI0100001167 | 100 | Sqm |
|---|
| 57 | 49 | M&L for Preparing old decorated plastered or unplastered surfaces of walls and applying one coat of plastic emulsion paint, white or tinted as approved complete all as specified and directed. | BI01010001010000000000000515BI0100001168 | 100 | Sqm |
|---|
| 58 | 50 | M&L for Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, and applying 1mm thick wall care putty (Make: Birla/JK) on wall and applying two coats distemper oil emulsion, white or tinted as approved complete all as specified and directed. . | BI01010001010000000000000515BI0100001169 | 50 | Sqm |
|---|
| 59 | 51 | M&L for preparation of surfaces of wood and wood based materials of any description, width or girth including cleaning and a coat of wood filler on old works and applying french polish in one or more coats to the required texure and glossy finish complete all as specified and directed. | BI01010001010000000000000515BI0100001170 | 100 | Sqm |
|---|
| 60 | 52 | M&L for preparation of old painted surface and applying one coats of aluminium paint on steel surface of any description over 10cm in width or girth completed all as specified and directed. | BI01010001010000000000000515BI0100001171 | 50 | Sqm |
|---|
| 61 | 53 | Taking down cement plaster on brick surface or stone including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed . | BI01010001010000000000000515BI0100001172 | 300 | Sqm |
|---|
| 62 | 54 | M&L for 15mm thick rendering fare face of brick/stone masonry walls in CM 1:4 finished complete all as specified and directed. | BI01010001010000000000000515BI0100001173 | 150 | Sqm |
|---|
| 63 | 55 | M&L for Preparation of newly plaster surface include brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of distemper oil emulsion white or tinted as approved complete all as specified and directed. | BI01010001010000000000000515BI0100001174 | 75 | Sqm |
|---|
