Construction Of 2X50 Mva , 132/33Kv Sub-Station At Nathkuchi Along With Associated Transmission Lines Under Aifa Scheme
Tender Value
45 Crore
Estimated cost
Bid Submission
17 Sep 2019
0 days left
EMD
90 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nathkuchi → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of 2X50 Mva , 132/33Kv Sub-Station At Nathkuchi Along With Associated Transmission Lines Under Aifa Scheme
BOQ
| Name of Work: TURNKEY CONSTRUCTION OF 132/33KV, 2X50 MVA SUB-STATION AT NATHKUCHI ALONG WITH ASSOCIATED TRANSMISSION LINES UNDER AIFA SCHEME | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Power transformer | |||
| 2 | 1.1 | 40/50 MVA, 132/33 kV, 3-Ph, YNyn0, Z =10 %, ONAN/ONAF with copper wound Power Transformer with OLTC(+5% to -15% in steps of 1.25%) , RTCC panel including all cabling & 10% spare oil.The Transformer shall be suitable for single / twin ACSR MOOSE Conductor termination on HV and twin ACSR MOOSE conductor on LV side. The transformer will be supplied with Bushing mounted NCT on HV & LV side as per the CT ration given in the SLD.The Transformer shall be suitable for outdoor installation & complete with all accessories to meet the technical specification. | Item 1 | 2 | Nos |
| 3 | 1.2 | 250 kVA, 33/0.433 kV, Copper Wound, 3ph, Dyn-11, Z=4% outdoor type \"Station Transformer\" with OFF Circuit Tap Changer , -5% to + 5 % in steps for 2.5 % & including 10 % spare oil.MV connection shall be through single ACSR MOOSE Conductor, LV Side shall be connected through XLPE Insulated LT cable. | Item 2 | 2 | Nos |
| 4 | 2 | 132kV Equipment | Item 3 | ||
| 5 | 2.01 | 145 kV, 3150 A, SCR 40 kA for 1 sec, SF6 Circuit Breaker, outdoor type, 3-Ph gang operated complete with operating mechanism & support structure with 10 % spare SF-6 gas. | Item 4 | 7 | Set |
| 6 | 2.02 | 145 KV, 1250 A, 40 kA for 1 sec, 3-Ph gang operated Double Break Centre Post rotating , outdoor type , motor operated Disconnector (Isolator) complete without solid core post Insulator. | Item 5 | ||
| 7 | 2.03 | Without earth switch | Item 6 | 6 | Set |
| 8 | 2.04 | With one earth switch(manual) | Item 7 | 12 | Set |
| 9 | 2.05 | With Two earth switch(manual) | Item 8 | 8 | Set |
| 10 | 2.06 | With one earth switch(manual) Tandem type | Item 9 | 6 | Set |
| 11 | 2.07 | 145 KV Outdoor type, live tank, single phase Current Transformer as per the details below: \nThe CT shall meet the technical specification & other design requirement as per design requirement.\n | Item 10 | ||
| 12 | 2.08 | Transformer feeder CTR : 600-300/1-1-1-1 A | Item 11 | 6 | Nos |
| 13 | 2.09 | Line & Bus Coupler CTR: 600-300/1-1-1-1 A | Item 12 | 15 | Nos |
| 14 | 2.1 | 145 kV, 1-ph, Capacitor Voltage Transformer (CVT) for 132 kV Incoming Line (132kV/v3/110/v3/110/v3V/110/v3V) as per technical specification. | Item 13 | 12 | Nos |
| 15 | 2.11 | 145 kV, 1-ph, Potential Transformer (PT) on BUS (132kV/v3/110/v3/110/v3V110/v3V) as per the technical specification. | Item 14 | 6 | Nos |
| 16 | 2.12 | 120 kV, 10 kA, Metal Oxide type, heavy duty, station class 3, Lightning Arrestor complete with Surge Counter & flexible copper connecting lead. | Item 15 | 18 | Nos |
| 17 | 2.13 | 145kV BPI for Buswork | Item 16 | 28 | Nos |
| 18 | 2.14 | 145kV BPI for Isolators | Item 17 | 297 | Nos |
| 19 | 2.15 | CT, CVT & PT JB complete with 30 nos Disconnecting type Terminals Blocks, complete with wiring. | Item 18 | 13 | Nos |
| 20 | 2.16 | Bay Marshalling Kiosk, made of 2.5 mm. thick sheet steel, protection class IP 55 complete with 250 TB | Item 19 | 7 | Nos |
| 21 | 3 | String Insulator Hardware for 132 kV | Item 20 | ||
| 22 | 3.01 | Single Tension Insulator assembly suitable for 11 kV, 90 kN Disc Insulator with all hardwares accessories for twin ACSR MOOSE conductor ( without disc Insulator) with turn buckle. | Item 21 | 24 | Set |
| 23 | 3.02 | Single Tension Insulator assembly suitable for 11 KV, 90 kN Disc Insulator with all hardwares accessories for twin ACSR MOOSE conductor ( without disc Insulator) without turn buckle. | Item 22 | 24 | Set |
| 24 | 3.03 | Single Suspension Insulator assembly suitable for 11 KV, 70 kN Disc Insulator with all hardwares accessories for twin ACSR MOOSE conductor for through type ( without disc Insulator) | Item 23 | 12 | Set |
| 25 | 3.04 | Single Suspension Insulator assembly suitable for 11 KV, 70 kN Disc Insulator with all hardwares accessories for single ACSR MOOSE conductor for through type ( without disc Insulator). | Item 24 | 15 | Set |
| 26 | 3.05 | Single Suspension Insulator assembly suitable for 11 KV, 70 kN Disc Insulator with all hardwares accessories for single ACSR MOOSE conductor for Drop type ( without disc Insulator). | Item 25 | 27 | Set |
| 27 | 3.06 | Single Tension Insulator assembly suitable for 11 KV, 90 kN Disc Insulator with all hardwares accessories for single ACSR MOOSE conductor ( without disc Insulator) with turn buckle. | Item 26 | 39 | Set |
| 28 | 3.07 | Single Tension Insulator assembly suitable for 11 KV, 90 kN Disc Insulator with all hardwares accessories for single ACSR MOOSE conductor ( without disc Insulator ) without turn buckle. | Item 27 | 24 | Set |
| 29 | 3.08 | Single Suspension Insulator assembly suitable for 11 KV, 70 kN Disc Insulator with all hardwares accessories for Twin ACSR MOOSE conductor for Drop type | Item 28 | 6 | Set |
| 30 | 3.09 | 90 KN Disc Insulator , B & S type for the String Insulator (Tension) with 5% spare | Item 29 | 1165 | Nos |
| 31 | 3.1 | 70 KN Disc Insulator (Suspension) with 5% spare | Item 30 | 567 | Nos |
| 32 | 3.11 | ACSR MOOSE conductor | Item 31 | 3700 | M |
| 33 | 4 | Terminal connectors for 132kV side. The Quantity of Terminal connectors shall be as per substation layout & shall be supplied as per technical specification as per individual equipment requirement | Item 32 | ||
| 34 | 4.01 | Terminal connector for 145kV Isolator to receive single ACSR MOOSE Conductor. | Item 33 | 198 | Nos |
| 35 | 4.02 | Terminal connector for 145kV SF6 Circuit Breaker to receive single ACSR MOOSE Conductor | Item 34 | 42 | Nos |
| 36 | 4.03 | Terminal connector for 145kV Current Transformer terminal to receive single ACSR MOOSE Conductor | Item 35 | 42 | Nos |
| 37 | 4.04 | Terminal connector for 145kV CVT terminal to receive Single ACSR MOOSE Conductor | Item 36 | 12 | Nos |
| 38 | 4.05 | Terminal connector for 145kV PT terminal to receive Single ACSR MOOSE Conductor | Item 37 | 6 | Nos |
| 39 | 4.06 | Terminal connector for 145kV BPI to receive single ACSR MOOSE Conductor | Item 38 | 24 | Nos |
| 40 | 4.07 | Terminal connector for Wave-trap to receive single ACSR MOOSE Conductor | Item 39 | 16 | Nos |
| 41 | 4.08 | Terminal connector for 120kV Lightning Arrester to receive Single ACSR MOOSE Conductor | Item 40 | 18 | Nos |
| 42 | 4.09 | Transformer Bushing Connector ( 145kV Side ) | Item 41 | 6 | Nos |
| 43 | 4.1 | Terminal connector for NCT suitable for 50x6 mm CU flat | Item 42 | 2 | Nos |
| 44 | 4.11 | Spacer for twin ACSR MOOSE with 250mm sub conductor spacing, rigid | Item 43 | 90 | Nos |
| 45 | 4.12 | C-Wedge connector for twin ACSR MOOSE | Item 44 | 48 | Nos |
| 46 | 4.13 | C-Wedge connector for single ACSR MOOSE | Item 45 | 63 | Nos |
| 47 | 4.14 | T- type connector suitable for single ACSR MOOSE through and same T-off | Item 46 | 48 | Nos |
| 48 | 4.15 | Shield Wire & Accessories | Item 47 | ||
| 49 | 4.16 | 7/3.15 mm GSS wire for shielding | Item 48 | 250 | M |
| 50 | 4.17 | Tension Fittings for 7/3.15mm Earth wire | Item 49 | 28 | Nos. |
| 51 | 4.18 | Earth Wire Connector (PG Clamps) | Item 50 | 20 | Nos. |
| 52 | 4.19 | Cleat Clamp for clamping 7/3.15 mm GSS wire on to the Structure | Item 51 | 150 | Nos. |
| 53 | 4.2 | Pad Clamp for clamping 7/3.15 mm GSS wire on to the Structure for earthing | Item 52 | 30 | Nos. |
| 54 | 5 | 33 kV Equipment\nThe equipment shall be suitable for outdoor installation and shall meet the technical requirement as per specification for 33 kV , 50 Hz, 31. kA/3 Sec., Creepage as 25 mm / Kv | Item 53 | ||
| 55 | 5.01 | 36 kV, 1250 A, SCR 31.5/3sec, SF6, Outdoor type, 3-Ph gang operated complete with operating mechanism & support structure for Incoming Feeders & Bus coupler. | Item 54 | 3 | Set |
| 56 | 5.02 | 36 kV, 1250 A, SCR 31.5/ 3 sec , SF6, Outdoor type, 3-Ph gang operated complete with operating mechanism & support structure for Outgoing Feeders. | Item 55 | 6 | Set |
| 57 | 5.03 | 36 KV,1250 A, 3-Ph gang operated, Outdoor type, Double Break centre Post rotating outdoor type motor operated Disconnector (Isolator) without solid core Post Insulator. | Item 56 | ||
| 58 | 5.04 | Without earth switch for Incomer from Transformer | Item 57 | 2 | Set |
| 59 | 5.05 | With one earth switch for Bus Coupler | Item 58 | 2 | Set |
| 60 | 5.06 | Outdoor type 36 kV, 630 A, 3-Ph gang operated, outdoor type, Double Break centre Post rotating outdoor type motor operated Disconnector (Isolator) with solid core Post Insulator. | Item 59 | ||
| 61 | 5.07 | With one earth switch | Item 60 | 14 | Set |
| 62 | 5.08 | Without earth switch | Item 61 | 2 | Set |
| 63 | 5.09 | 36 kV Out door type, live tank, single phase Current Transformers as given below:The CT shall meet the technical specification & other design requirements. | Item 62 | ||
| 64 | 5.1 | 36 kV Transformer side & Bus Coupler CTR:1200-600 /1-1-1 A | Item 63 | 9 | Nos |
| 65 | 5.11 | 36 kV outgoing Line Feeder CTR:1200-600/1-1-1 A | Item 64 | 18 | Nos |
| 66 | 5.12 | 15 kV Neutral Current Transformer for 132/33 kV transformer on 33 kV side, CTR1200-600/1 -1A | Item 65 | 2 | Nos. |
| 67 | 5.13 | Outdoor type 36 kV ,1-ph, Potential Transformer(PT) (33kV/v3/110/v3/110/v3V) as per technical specification | Item 66 | 6 | Nos. |
| 68 | 5.14 | 30 kV,10 kA, Metal Oxide type, heavy duty, station class Lightning Arrestor complete with Surge Counter & copper connecting lead | Item 67 | 30 | Nos. |
| 69 | 5.15 | 33 kV, 8 kN Post Insulator (Bus works) | Item 68 | 33 | Nos. |
| 70 | 5.16 | 33 kV, 6 kN Post Insulator (Isolators) | Item 69 | 29 | Nos. |
| 71 | 5.17 | 100Amp, Horn gap fuse | Item 70 | 2 | Set |
| 72 | 5.18 | CT & PT JB complete with 30 nos Disconnecting type Terminal Blocks, complete with wiring. | Item 71 | 11 | Nos. |
| 73 | 5.19 | Bay Marshalling Kiosk, made of 2.5 mm. thick sheet steel, protection class IP 55 complete with 200 TB. | Item 72 | 9 | Nos. |
| 74 | 6 | Terminal connectors _ 33 kV side. The quantity of Terminal connectors shall be as per substation layout & shall b supplied as per technical specification as per individual equipment requirement | Item 73 | ||
| 75 | 6.01 | Terminal Connector for 36 kV Isolator to receive twin ACSR MOOSE Conductor | Item 74 | 24 | Nos. |
| 76 | 6.02 | Terminal Connector for 36 kV Isolator to receive Single ACSR MOOSE Conductor | Item 75 | 96 | Nos. |
| 77 | 6.03 | Terminal Connector for 36 kV SF6 Circuit Breaker to receive twin ACSR MOOSE Conductor | Item 76 | 18 | Nos. |
| 78 | 6.04 | Terminal Connector for 36 kV SF6 Circuit Breaker to receive Single ACSR MOOSE Conductor | Item 77 | 36 | Nos. |
| 79 | 6.05 | Terminal Connector for 36kV Current Transformer to receive twin ACSR MOOSE Conductor | Item 78 | 18 | Nos. |
| 80 | 6.06 | Terminal Connector for 36kV Current Transformer to receive Single ACSR MOOSE Conductor | Item 79 | 36 | Nos. |
| 81 | 6.07 | Terminal Connector for NCT suitable for 50x6 mm CU flat | Item 80 | 2 | Nos. |
| 82 | 6.08 | Terminal Connector for 30 kV Lightning Arrester to receive Single ACSR MOOSE Conductor | Item 81 | 30 | Nos. |
| 83 | 6.09 | Terminal Connector for 36 kV PT Connector to receive Single ACSR MOOSE Conductor | Item 82 | 6 | Nos. |
| 84 | 6.1 | Transformer LV side Bushing Clamp (40/50 MVA Trafo) | Item 83 | 6 | Nos. |
| 85 | 6.11 | Transformer MV side Bushing Clamp (250 kVA Trafo) | Item 84 | 6 | Nos. |
| 86 | 6.12 | 3 Inch IPS AL Tube for 33kV bus | Item 85 | 680 | Kg |
| 87 | 6.13 | Terminal connector for Bus PI suitable for 3 Inch IPS AL Tube | Item 86 | 21 | Nos. |
| 88 | 6.14 | Terminal connector for Bus PI suitable for twin ACSR moose conductor | Item 87 | 2 | Nos. |
| 89 | 6.15 | Terminal connector for Bus PI suitable for single ACSR moose conductor | Item 88 | 9 | Nos. |
| 90 | 6.16 | Tee connector suitable for interconnection of twin ACSR moose conductor to Al tube. | Item 89 | 6 | Nos. |
| 91 | 6.17 | Tee connector suitable for interconnection of Single ACSR moose conductor to Al tube. | Item 90 | 21 | Nos. |
| 92 | 6.18 | Spacer for twin ACSR MOOSE with 250 mm sub conductor spacing, rigid | Item 91 | 20 | Nos. |
| 93 | 6.19 | Terminal connector for Bus PI suitable for single ACSR moose conductor | Item 92 | 29 | Nos. |
| 94 | 6.2 | End Caps and couplers/bends for 3Inch IPS AL Tube | Item 93 | 7.5 | Kg |
| 95 | 6.21 | Shield Wire Accessories | Item 94 | ||
| 96 | 6.22 | Lightning mast with spike (Tubular pole) | Item 95 | 2 | Nos. |
| 97 | 7 | Control , Protection & Metering equipment | Item 96 | ||
| 98 | 7.01 | Control and Relay Panel | Item 97 | ||
| 99 | 7.02 | Indoor floor mounted, simplex type Control and Relay Panels, with mimic & annunciation panel for 132kV system as per specification comprising of the C & R Panels shall be complete with Numerical Relays and ABT Meters as per the Technical specifications & shall be compatible for SCADA/ SAS as open protocol. | Item 98 | ||
| 100 | 7.03 | 132 kV Line Protection & control Panel | Item 99 | 4 | Nos. |
| 101 | 7.04 | 132/33 kV Transformer Protection & Control Panel | Item 100 | 2 | Nos. |
| 102 | 7.05 | 132 kV Bus Coupler Protection & Control Panel | Item 101 | 1 | Nos. |
| 103 | 7.06 | Metering Panel for Lines | Item 102 | 2 | Nos. |
| 104 | 7.07 | Indoor floor mounted, simplex type control and relay panels, with mimic & annunciation panel with ABT Meters for 33kV system as per specification and data sheet comprising of : | Item 103 | ||
| 105 | 7.08 | 33KV Line Protection & Control Panel | Item 104 | 6 | Nos. |
| 106 | 7.09 | 33KV Transformer I/C Protection & Control Panel on 33 k V side of Power Transformer | Item 105 | 2 | Nos. |
| 107 | 7.1 | 33KV Protection & Control Panel for Bus Section\nThe control, metering & protection system shall be complete with Numerical relays & compatible for performing the functions as per the electrical specifications & shall be fully compatible with substation automation /SCADA. | Item 106 | 1 | Nos. |
| 108 | 8 | PLCC Equipment | Item 107 | ||
| 109 | 8.01 | EPAX(8x24) with 24 nos. telephone, cable etc | Item 108 | 1 | Nos |
| 110 | 8.02 | Digital Protection Coupler with PLC Terminal | Item 109 | 4 | Nos |
| 111 | 8.03 | LMU / LMDU | Item 110 | 4 | Nos |
| 112 | 8.04 | HF Cable 75 ohms(balanced) | Item 111 | 1.2 | Km |
| 113 | 8.05 | 132 kV, 800A wave trap for 40 kA for 1 sec. Wave trap will be CVT mounted. | Item 112 | 8 | No. |
| 114 | 9 | Substation Automation | Item 113 | ||
| 115 | 9.1 | Substation Automation & SCADA system (as per the technical specification) along with Ethernet, Data Concentrator/ BCU , communication & data server, local work station with necessary accessories, hardware /software, fiber optic cabling & time synchronization equipment. Substation automation system of 132/33kV substations including hardware for present bays(132KV 8 Nos. bays , 33kV 10 no bays,) and software (for present bays and 132kV 3 no & 33kv 2 no future bays) along with associated equipment for each bay\n\nThe system shall be complete with Numerical Relay compatible with substation automation for 132 kV & 33 kV system. The numerical relays along with other measuring / indicating Instruments shall be part of the integrated SCADA system. The complete system of this Substation shall be integrated on SCADA which shall be further the communicable to Master control center & further communicate to RLDC. | Item 114 | 1 | Nos. |
| 116 | 10 | Earthing and Lightning protection material | Item 115 | ||
| 117 | 10.01 | 65 x 12 mm MS flat for Main Earth mat & Auxiliary Mat | Item 116 | 6500 | Mtr. |
| 118 | 10.02 | 75 x 12 mm GI Flat for Equipment Earthing like CT,CB, Isolator , LA, BPI & Tower Earthing, riser below ground etc. (3.53kg/m) | Item 117 | 4200 | Mtr. |
| 119 | 10.03 | 75 x 12 GI Flat for earthing of Transformer body | Item 118 | 70 | Mtr. |
| 120 | 10.04 | 50 x 6 mm GI Flat for earthing of Marshalling Boxes, Panel, Junction boxes, Distribution Board, Battery Charger etc. (2.36kg/m) | Item 119 | 1100 | Mtr. |
| 121 | 10.05 | 50x6 mm MS flat for cable trench earthing. | Item 120 | 500 | Mtr |
| 122 | 10.06 | 50 x 6 mm Copper flat for earthing of Transformer Neutral on HV as well LV Side. (2.69kg/m) | Item 121 | 100 | Mtr. |
| 123 | 10.07 | 40 mm Dia, 6.5 mtr long GI rod earth electrode (perforated) for earthing of LA, CVT, Lightning Mast, Shield Wire Transformer Neutral | Item 122 | 110 | Nos. |
| 124 | 10.08 | 40 mm Dia 6.5 mtr long GI. Rod Earth Electrode at corners of Main Earth Mat , Gate & control room Earthing | Item 123 | 18 | Nos. |
| 125 | 10.09 | Lightning spikes for building which 100 mm dia GI Pipe, 1.5 mtr to be mounted on insulated base on building top and connected with 50x6 mm GI Flat. | Item 124 | 56 | Nos. |
| 126 | 10.1 | 50x6 mm GI flat for all building spikes | Item 125 | 1040 | Mtr. |
| 127 | 10.11 | 40 mm Dia 6.5 mtr long GI. Rod Earth Electrode for building spikes earthing | Item 126 | 56 | Nos. |
| 128 | 10.12 | Electrolytic grade copper plate 600mmx600mmx6mm for Transformer Neutral earthing to be provided in 6.5 mtr deep earth pit to be filled with salt & charcoal (as per standard earthing Practices)(Power trafor and aux. trafo) | Item 127 | 12 | Nos. |
| 129 | 10.13 | Note: The quantity of GI Flat/MS rod for earthing & lightning protection is approximate. The exact quantity to be arranged as per GFC drawing and as per site requirement | Item 128 | ||
| 130 | 11.1 | Lattice type Structural Steel | Item 129 | ||
| 131 | 11.2 | Tower and Beams | Item 130 | ||
| 132 | 11.3 | Structural steel for Tower and beams (50% of MS and 50% of HT) | Item 131 | 63.38 | MT |
| 133 | 12 | Hardwares, nuts, bolts and spring washer | Item 132 | 4.39 | MT |
| 134 | 12.1 | Foundation Nuts and bolts | Item 133 | 4.05 | MT |
| 135 | 12.2 | Equipment | Item 134 | ||
| 136 | 12.3 | Structural steel for Equipment | Item 135 | 70.23 | MT |
| 137 | 12.4 | Hardwares, nuts, bolts and spring washer | Item 136 | 4.99 | MT |
| 138 | 12.5 | Foundation Nuts and bolts for equipment | Item 137 | 5.59 | MT |
| 139 | 12.6 | 132 KV , Lightning cum lighting mast , 30 mtr high with lighting platform at 17 mtrs & 1.5 mtr spike at top | Item 138 | 33 | MT |
| 140 | 13.01 | Hardware , Nuts & bolts for LM | Item 139 | 1.32 | MT |
| 141 | 13.02 | Foundation Bolts | Item 140 | 0.888 | MT |
| 142 | 13.03 | Cable and accessories | Item 141 | ||
| 143 | 13.04 | 19/33 kV ( earthed system ) , 3Core 300 sqmm., AL Conductor, XLPE Insulated , PVC Sheathed, Armoured PVC Outer Sheath Cable for 33 kV outgoing feeder(200 meter/fedeer). | Item 142 | 1320 | Mtr |
| 144 | 13.05 | 33 kV outdoor termination kit | Item 143 | 6 | Set |
| 145 | 14 | LT Power Cable | Item 144 | ||
| 146 | 14.01 | AC Circuit\n1.1 kV PVC Insulated 'PVC sheathed, GI wire / steel strip armoured, Aluminum/Copper Conductor cable of the following sizes: | Item 145 | ||
| 147 | 14.02 | Station transformer LV side to Main LVAC Board\n3 1/2 core x 300 sq.mm AL (XLPE)cable from Station Transformer to LVAC Board | Item 146 | 200 | Mtr |
| 148 | 14.03 | 3 1/2 core x 150 Sqmm Al cable for oil filtration | Item 147 | 150 | Mtr. |
| 149 | 14.04 | 3 1/2 core x 70 Sqmm Al cable for outdoor illumination & for battery charger | Item 148 | 525 | Mtr. |
| 150 | 14.05 | 2 core x 16 Sqmm Cu cable for BMK, Trafo MB, fire panel & LDB | Item 149 | 1100 | Mtr. |
| 151 | 14.06 | 2 Core 6 Sqmm Cu cable for CT & CVT JB | Item 150 | 1000 | Mtr. |
| 152 | 14.07 | 4 Core 16 sqmm Al cable for panel illumination | Item 151 | 150 | Mtr. |
| 153 | 14.08 | 4 Core 16 sqmm Al cable fo outdoor illumination JB | Item 152 | 800 | Mtr. |
| 154 | 14.09 | 3 Core 2.5 sqmm CU cable fo outdoor illumination | Item 153 | 1150 | Mtr. |
| 155 | 14.1 | DC Circuit | Item 154 | ||
| 156 | 14.11 | 2 Core x 16 sqmm Cu cable for miscellaneous | Item 155 | 1500 | Mtr. |
| 157 | 14.12 | 2 Core x 50 sqmm Cu cable for DCDB to battery charger(Flexible multi strand) | Item 156 | 200 | Mtr. |
| 158 | 14.13 | 1 C X 70 Sqmm Cu cable for Charger to battery (Flexible multi strand) | Item 157 | 200 | Mtr. |
| 159 | 14.14 | Termination with double compression Gland and Al lugs for 3 ½ core x 400 sqmm. Al cable. | Item 158 | 1 | Lot |
| 160 | 14.15 | Termination with double compression Gland and lugs 3 1/2 core x 150 sqmm. Al. cable | Item 159 | 1 | Lot |
| 161 | 14.16 | Termination with double compression Gland and lugs 2 core x 16 sqmm. Cu. Cable | Item 160 | 1 | Lot |
| 162 | 14.17 | Termination with double compression Gland and lugs 3 1/2 core x 150 sqmm. Al. cable | Item 161 | 1 | Lot |
| 163 | 14.18 | Termination with double compression Gland and lugs for 2core x 6 sqmm. Cu cable | Item 162 | 1 | Lot |
| 164 | 14.19 | Termination with double compression Gland and lugs for 4core x 16 sqmm.. Cable | Item 163 | 2 | Lot |
| 165 | 14.2 | Termination with double compression Gland and lugs for 2core x 16 sqmm.Cu cable | Item 164 | 1 | Lot |
| 166 | 14.21 | Termination with double compression Gland and lugs for 2core x 35 sqmm.. Cu cable | Item 165 | 1 | Lot |
| 167 | 14.22 | Termination with double compression Gland and lugs for1 core x 70 sqmm.. Crucible | Item 166 | 1 | Lot |
| 168 | 14.23 | Termination with double compression Gland and lugs for 3 corex 2.5 sqmm.Cu cable | Item 167 | 1 | Lot |
| 169 | 15 | Copper Control Cable | Item 168 | ||
| 170 | 15.01 | 1100 V grade, PVC Insulated, PVC sheathed, steel round wire armoured, stranded control cables of the following sizes: | Item 169 | ||
| 171 | 15.02 | 2 core 2.5 sqmm. | Item 170 | 700 | Mtr |
| 172 | 15.03 | 2 core 4 sqmm. | Item 171 | 270 | Mtr |
| 173 | 15.04 | 2 Core 6 sqmm. | Item 172 | 200 | Mtr |
| 174 | 15.05 | 4Core 4 sqmm. | Item 173 | 4200 | Mtr |
| 175 | 15.06 | 4 core 2.5 sqmm. | Item 174 | 7100 | Mtr |
| 176 | 15.07 | 7 core 2.5 sqmm. | Item 175 | 2900 | Mtr |
| 177 | 15.08 | 12 core 2.5 sqmm. | Item 176 | 7900 | Mtr |
| 178 | 15.09 | 19 Core 2.5 sqmm. | Item 177 | 6500 | Mtr |
| 179 | 15.1 | Double compression Glands and terminations (including ferruling, suitable Cu Lugs to meet the system requirements) for 1100 V grade PVC Insulated multicore Copper stranded conductor control cables of sizes: (2 core 2.5 sqmm.,2 core 4 sqmm., 2 Core 6 sqmm., 4Core 4 sqmm.,4Core 2.5 sqmm.7 core 2.5 sqmm,12 core 2.5 sqmm. &19 Core 2.5 sqmm.) | Item 178 | 1 | Lot |
| 180 | 16 | Cable Support & Cable Trays | Item 179 | ||
| 181 | 16.1 | Ladder type Cable Trays for outdoor | Item 180 | ||
| 182 | 16.2 | 450 mm wide | Item 181 | 980 | Mtrs |
| 183 | 16.3 | 300 mm wide | Item 182 | 825 | Mtrs |
| 184 | 16.4 | Perforated Cable Trays inside the Control Building | Item 183 | ||
| 185 | 16.5 | 450 mm wide | Item 184 | 200 | Mtrs |
| 186 | 16.6 | 300 mm wide | Item 185 | 60 | Mtrs |
| 187 | 16.7 | HDD/PVC pipe for laying cable from Trench to equipment | Item 186 | 1 | Lot |
| 188 | 16.8 | 63 mm Dia | Item 187 | ||
| 189 | 16.9 | 100 mm Dia | Item 188 | ||
| 190 | 17 | AC Distribution Board | Item 189 | ||
| 191 | 17.1 | AC 415V, 500A, 3-Ph cubicle type Indoor, floor mounted, auxiliary service board as per specification comprising of : (LVAC Board will have 2 sections , each section will be fed from independent Aux. transformer ( 250 KVA , 33/0.433 k V ).Busbar rating 600 A, 25 k A for 1 sec, Copper , IP 54 , 2 mm COLD ROLLED / 3 MM HOT ROLLED as aper specification ) | Item 190 | 1 | Set |
| 192 | 18 | DC Distribution Board ( 220 V DC & 48 VDC) | Item 191 | ||
| 193 | 18.1 | DC Distribution Board will have 2 sections , each section will be fed from independent Battery charger. Busbar rating 200 A FOR 220 V DC, 16 k A / FOR 1 SEC , AL or Copper , IP 54 , 2 mm COLD ROLLED / 3 MM HOT ROLLED) as per specification | Item 192 | 1 | Set |
| 194 | 18.2 | DC Distribution Board will have 2 sections , each section will be fed from independent Battery charger. Busbar rating 200 A FOR 48 V DC, 16 k A / FOR 1 SEC , AL or Copper , IP 54 , 2 mm COLD ROLLED / 3 MM HOT ROLLED) as per specification | Item 193 | 1 | Set |
| 195 | 19 | Battery and Battery charger | Item 194 | ||
| 196 | 19.1 | Battery set ( 220 V DC ) | Item 195 | ||
| 197 | 19.2 | 220V DC, 300 AH lead acid battery of VRLA type complete with accessories as per specification with 10% spare acid in non- returnable container (In tier arrangement). | Item 196 | 1 | Set |
| 198 | 19.3 | Battery set ( 48 V DC ) | Item 197 | ||
| 199 | 19.4 | 48V DC, 200 AH lead acid battery of VRLA type complete with accessories as per specification with 10% spare acid in non- returnable container (In tier arrangement). | Item 198 | 1 | Set |
| 200 | 19.5 | Battery charger ( 220 V DC ) | Item 199 | ||
| 201 | 19.6 | Automatic float and Float cum boost charger 60 A suitable for 220 V 300 AH VRLA battery & charger shall be as per specification | Item 200 | 1 | Set |
| 202 | 19.7 | Battery charger ( 48 V DC ) | Item 201 | ||
| 203 | 19.8 | Automatic float and Float cum boost charger 50 A suitable for 48 V 200 AH VRLA battery & charger shall be as per specification | Item 202 | 1 | Set |
| 204 | 20 | Fire fighting | Item 203 | ||
| 205 | 20.1 | NIFPS _ Nitrogen Injection Fire Fighting System System for Transformer | Item 204 | 2 | Set |
| 206 | 20.2 | Fire Fighting equipment as per section-6 22.5 Kg capacity FE CO2 type, Trolley Mounted | Item 205 | 4 | Nos. |
| 207 | 20.3 | 25 Kg Capacity FE DCP type, Trolley Mounted | Item 206 | 4 | Nos. |
| 208 | 20.4 | DCP 10 Kg Capacity, Wall mounted | Item 207 | 6 | Nos. |
| 209 | 20.5 | FE CO2 6.5 Kg capacity, Wall mounted | Item 208 | 4 | Nos. |
| 210 | 20.6 | DCP 5 Kg Capacity, Wall mounted | Item 209 | 3 | Nos. |
| 211 | 20.7 | Foam Type 9 liter Capacity, Wall mounted | Item 210 | 4 | Nos. |
| 212 | 20.8 | Water CO2 9 liter, Wall mounted | Item 211 | 4 | Nos. |
| 213 | 20.9 | Fire Buckets (12 Nos. with stand in one set) | Item 212 | 2 | set |
| 214 | 21 | Outdoor illumination | Item 213 | ||
| 215 | 21.1 | LED flood light fitting with 250W led with all accessories control gear for Yard Lighting ( to be mounted on Gantry Tower ) | Item 214 | 22 | Nos. |
| 216 | 21.2 | LED flood light fitting with 250W led with all accessories control gear near boundary( to be mounted on 10 mtr. Pole) | Item 215 | 16 | Nos. |
| 217 | 21.3 | LED street light fitting with 150W led with all accessories control gear on street ( to be mounted on 10 mtr. Pole) | Item 216 | 36 | Nos. |
| 218 | 21.4 | 70W LED lights post latern light mounted on 2.5 mtr. P-type pole | Item 217 | 10 | Nos. |
| 219 | 21.5 | 10 Mtr. MS Tubular poles 540SP-72 | Item 218 | 52 | Nos. |
| 220 | 21.6 | 2.5 Mtr. P-type pole made of 100mm Dia GI Pipe | Item 219 | 10 | Nos. |
| 221 | 21.7 | Lighting junction box for Light suitable for out door Installation comprising of 4 Nos. CBT M 4 type terminal connector for light connections Max size 150 x150x100mm | Item 220 | 84 | Nos. |
| 222 | 21.8 | AC 415V,50 kA for 1 Sec cubicle type Outdoor, Plinth mounted, Outdoor yard lighting panel as per specification comprising of Incomer 100A TPN MCCB - (1 No.), light. (1 Nos), 70A 4P CONTACTOR 1 NOS,24 Hr timer for auto Operation,Auto manual selector switch , I set push button for on/off operation.,Outgoing feeder 63A TPNMCB (4 nos) | Item 221 | 3 | Nos. |
| 223 | 22 | Air conditioning | Item 222 | ||
| 224 | 22.1 | Split unit for Control room (capacity 2 TR) | Item 223 | 7 | Nos. |
| 225 | 23 | Measuring Instruments | Item 224 | ||
| 226 | 23.1 | Digital earth resistance meter | Item 225 | 1 | Nos |
| 227 | 23.2 | 5 kV automated Insulation resistance meter | Item 226 | 1 | Nos |
| 228 | 23.3 | Earthing stick | Item 227 | 1 | Nos |
| 229 | 24 | Furniture | Item 228 | ||
| 230 | 24.1 | Executive Table :(1800mmX900mm)(Wooden) | Item 229 | 2 | Nos |
| 231 | 24.2 | Executive Chair:(Revolving mid back type) | Item 230 | 3 | Nos |
| 232 | 24.3 | Visitor's Chair with hand rest | Item 231 | 6 | Nos |
| 233 | 24.4 | Computer Room Executive Chair (Revolving mid back type) | Item 232 | 1 | Nos |
| 234 | 24.5 | 2 nos. of Steel Almirah LengthXWidthXHeight in mm(1016X560X1980) | Item 233 | 2 | No |
| 235 | 24.6 | 1 Nos. of Recta work station of size 1200mmX600mm,25 mm thick work top with 3 drawer pedestal along with keyboard tray and CPU trolley and partitions of thickness 53 mm and of height 1200 mm. | Item 234 | 1 | No |
| 236 | 25 | Miscelleaneous items (First Aid box -2 nos ,Accident prevention chart - 2nos, Aluminum alloy ladder - 2 nos , Safety belt 6nos , Earthing stick -3 nos , Helmet - 10 nos)) | Item 235 | 1 | Lot |
AI Tender Summary
Tender Timeline
Aug 24, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedSep 17, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 18, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender