Construction Of Rmc Road In Kh . No . 207 In Village Shikarpur In Najafgarh Block In Matiala Constituency Ac-34 .
Tender Value
35.03 Lakhs
Estimated cost
Bid Submission
06 Sep 2019
0 days left
EMD
70064
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shikarpur → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Rmc Road In Kh . No . 207 In Village Shikarpur In Najafgarh Block In Matiala Constituency Ac-34 .
BOQ
| Name of Work:- Construction of RMC road in Kh. No. 207 in village Shikarpur in Najafgarh block in Matiala Constituency AC-34. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil. | BI01010001010000000000000515BI0100001113 | 117 | Cum |
| 2 | 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | 59 | Cum | |
| 3 | 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). | 47 | Cum | |
| 4 | 4 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand). | 233 | Cum | |
| 5 | 5 | Supply of earth including royaltyexcavation, loading, unloading and carriage by mechanical transport lead upto 5.00 KM and banking the same in layer not exceeding 20cm in depth breaking clods watering rolling each layer with ½ tone roller or wooden or steel rammersand dressing up in embankment for roads, flood banks, marginal banks and guide banks or filling up ground depressions with all lifts in all kind of soil. | 377 | Cum | |
| 6 | 6 | 12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand). | 626 | Sqm | |
| 7 | 7 | Finishing walls with water proofing cement paint of required shade :New work (Two or more coats applied @ 3.84 kg/10 sqm). | 626 | Sqm | |
| 8 | 8 | Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :300 mm dia. R.C.C. pipe. | 18 | Mtr | |
| 9 | 9 | Providing and laying in position ready mixed plain cement concrete, with cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for plain cement concrete work, including pumping of R.M.C. from transit mixer to site of laying and curing, excluding the cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge. Note : (1) Excess/less cement used than specified in this item is payable/ recoverable separately. All works upto plinth level: M-10 grade plain cement concrete (cement content considered @ 220 kg/cum). | 90 | Cum | |
| 10 | 10 | Providing and laying RMC of M-30 grade by using minimum 400kg of cement(43 garde,OPC) per cum of concrete in roads/streets manufactured in automatic RMC plant using coarse sand and graded stone aggregate of 20mm nominal size in appropriate proportion as per approved design criteria including transportation to site in transit mixer, including cost of admixture in recommended proportion as per IS9103 to accelerate/retard setting of concrete to improve workability with out imparing strength and durability as per specification including spreading and compacting machenically by using needle and surface vibrators, levelling to required slope & camber, finishing by floating & brooming with wire brushes etc. and curing including making provision for contraction/expansion, construction of cross/longitudinal joints of size 10mm wide 50mm deep by groove cutting machine, providing and filing joints with approved joint filler and sealents, etc. complete, as per direction of Engineer-in-charge. (Cost of joint filler & sealents shall be paid for seperately under relevant items). | 179 | Cum | |
| 11 | 11 | Providing and fixing in position pre-moulded joint filler in expansion joints. | 1042 | Cm |
AI Tender Summary
Tender Timeline
Aug 23, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedSep 06, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 06, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender