Public Works Department-PWD has published Providing And Laying Of Synthetic Athletic Track At Navdeep Stadium At Narwana In Jind Distt . ( Pdg . High Mast And Lighting Only ). Submission Date for this Tender is 30-08-2019. Civil Work Tenders in Jind Haryana. Bidders can get complete Tender details and download the document.
| Name of Work: Pdg. & laying of Synthetic Athletic Track at Navdeep Stadium at Narwana in Jind Distt. (Pdg. High Mast & Lighting only) | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Moulded case Circuit breakers.\n31.12 (c) Supply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections.\n31.12 c (i) 15 amp.to 60 amp. 415 V ,10 KA 3-phase. | BI01010001010000000000000515BI0100001112 | 15 | Each |
| 2 | 1.01 | 31.12 c (iii) 250 amp. 415 V , 35 KA 3-phase. | BI01010001010000000000000515BI0100001113 | 1 | Each |
| 3 | 2 | 31.17 Miniature Circuit Breaker and Isolator.\nSupply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections.\n(a) Miniature circuit breakers of 9 KA breaking capacity.\n31.17(a) (ii) TP MCB 6 amp. to 32 amp. | BI01010001010000000000000515BI0100001114 | 20 | Each |
| 4 | 2.01 | 31.17a) (ii) SP MCB 6 amp. to 32 amp. | BI01010001010000000000000515BI0100001115 | 20 | Each |
| 5 | 3 | 31.22 Earthing .\n31.22(i) Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required . | BI01010001010000000000000515BI0100001116 | 12 | Each |
| 6 | 3.01 | 31.22(ii) Extra for using salt and charcoal / coke for pipe earth electrode as required. | BI01010001010000000000000515BI0100001117 | 12 | Each |
| 7 | 3.02 | 31.22(xii) Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required . | BI01010001010000000000000515BI0100001118 | 50 | P. Mtr. |
| 8 | 4 | 31.26 Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections .\n31.26 (xxxix) Ard. 10 Sq. mm 4 Core Cable . | BI01010001010000000000000515BI0100001119 | 525 | P. Mtr. |
| 9 | 4.01 | 31.26 (xI) Ard. 16 Sq. mm 4 Core Cable . | BI01010001010000000000000515BI0100001120 | 420 | P. Mtr. |
| 10 | 4.02 | 31.26 (xIi) Ard. 25 Sq. mm 4 Core Cable . | BI01010001010000000000000515BI0100001121 | 1400 | P. Mtr. |
| 11 | 5 | Pedestal .\n31.33 Supply and erection of Godrej Almirah typeM.S.pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S.sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars . The top covering should have downward overhang of 75 mm on all sides of pedestal , having two sets of water proof ventilation holes of suitable size on the sides , at top and bottom , each set containing four Nos. holes to discharge the heat produced by the current . The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embeded upto the entire depth in 1:2:4 cement concrete block , projected 75 mm all around the pedestal and and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work:- \n31.33 (ii) M.S.pedestal of size 750 mm wide , 900 mm high , 300 mm deep and bottom totally open , duly embeded in cement concrete block of size 900 mm x 450 mm x 200 mm above ground level duly plastered with 12 mm thick 1:4 cement plaster , having a base of size 1050 mm x 600 mm x 250 mm below ground level . | BI01010001010000000000000515BI0100001122 | 6 | Each |
| 12 | 6 | 31.40 Supply and erection of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe.\n31.40 (i) Size 1.5 sqmm ( 3/0.81 ) | BI01010001010000000000000515BI0100001123 | 100 | P. Mtr. |
| 13 | 7 | 31.63 Supply installation testing and commissioning of wall/ free standing floor mounting dust and vermin proof compartmentalized cubical panel made out of 2mm thick CRCA street, required hardware 3 mm thick bakelite sheet provided all along with bus bar and cable alley separating switches compartment and supporting suitable channel duly painted by 2 coat of zinc/ Red oxide primer followed by 2 coat of powder coating in gray or required shade after rising. The panel having PU/Neoprene rubber gasket of not less than 3 mm thickness separate detachable gland plate MS base channel hinged door with inter locking agreement for equipment / switch wear. Transparent acrylic sheet shall be provided in front of bus bar compartment to prevent direct access to bus bar bakelite sheet 3 mm thick for separately cable alley to BBC from switch chamber Extended solid copper bars upto cable alleys shall be provided for outgoing connection which shall be paid as extra items. Side walls and cable alley compartments shall be having bolted type doors with detachable extension type structure. the panel will be complete with control wiring (copper) and fuse protection ( only outer area on all sides shall be measured) | BI01010001010000000000000515BI0100001124 | 6 | P. Sqm |
| 14 | 8 | 31.64 Supplying and fixing of copper bus bar duly tinned by means of SMC / BMC type insulatter high tensile nuts and bolts spring washer fixing to same in existing pannel including bending, cutting in required shape and size and insulation with colour coding heat shrinkable PVC insulation complete in all respect. | BI01010001010000000000000515BI0100001125 | 40 | P. Kg. |
| 15 | 9 | 31.65 Pdg. and fixing digital metering equipment for LT cubical panel consisting of 96 mm x 96mm 0-500V, Volt meter with selector switch amp meter (Of required ratio upto 600/5 amp) with selector switch and required C.Ts 3 Nos. a set of 3 Nos. phase indication lamp RYB LED. | BI01010001010000000000000515BI0100001126 | 1 | P. Set |
| 16 | 10 | 31.66 Supply and Fixing of rotary handle for ON / OFF operation of existing MCCB in the LT panel including fixing the same in position with all labour and material to required to complete the job in all respect.\n(i) Rotary Handle up to 125 Amp., MCCB | BI01010001010000000000000515BI0100001127 | 15 | Each |
| 17 | 10.01 | (ii) Rotary Handle above 125 Amp., MCCB | BI01010001010000000000000515BI0100001128 | 1 | Each |
| 18 | 11 | 31.67 Supply and erection of mark double walled corrugated (DWC) HDPE pipe laid 1Mtr. Below ground level including diging and refilling of earth including cost of sutiable size socket/cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work. \n(i) HDPE pipe 63/50 mm outer dia/inner dia. | BI01010001010000000000000515BI0100001129 | 2210 | P. Mtr. |
| 19 | 12 | 31.68 Supply and Erection of Hot Dip Galvanized octagonal pole of 3mm thickness with base plate including cost of nut and bolts and all accessories as supplied by the manufacture including cost of foundation accessories etc. The foundation bolts as per manufacturer design should be hot dipped galvanized pole complete with door locking arrangement. Terminal plate consisting of 2 Nos. 100 A, 4 pole natural links including connectin etc. with suitable connecting arrangement for 2 No. MCBs/ Kit Kat including cost of R.C.C 1:1 5:3 for foundation of size 0.7M x 0.7 M x 1.8 M with minimum 8 Nos. 12 mm dia longitudinal MS reinforcement rods with rings of 8mm dia not more than 200mm C.C for fixing the pole with all labour & material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work. \n(i) 7 Mtr. Long pole with top dia 70mm and bottom dia 130 mm with base plate of size 220x220x12mm | BI01010001010000000000000515BI0100001130 | 16 | Each |
| 20 | 12.01 | (iii) 9 Mtr. Long pole with top dia 70mm and botom dia 155mm with base plate of size 260 x 260 x 16mm. | BI01010001010000000000000515BI0100001131 | 4 | Each |
| 21 | 13 | M.R. items\nNS-1\nSupply, installation, testing and commissioning of 30 Mtr. Long Sports Mast manufactured from B.S.E.N 10025 or equivalent grade material in, 3 (three) section hot dip, galvanized inside and outside in single dip, The mast sections shall be manufactured from M.S. sheets conforming to BSEN 10025, S355 J0 or equivalent, cut and folded to form a continuously tapered polygonal section having maximum one longitudinal weld. The welding shall comply IS 9595. Masts shall be delivered in three sections of approximately 10.7 m which shall be assembled at site by slip-stressfit method. The minimum overlap distance shall be 1.5 times the diameter at penetration. There will be no circumferential welding in any section. No site welding or bolted joints in the mast sections will be allowed suitable for wind velocity as per IS 4759 loading fully motorized motor 3 phase 415 volt min 3 HPwith starter & cable 5 core x4sqmm, 2 no. trailing cable permanent for 2 circuit complete along with standard accessories Mast base section will have a lockable door of size 1200mm X 300mm for easy access to winch and power tool operations. Bottom of door shall be 500mm above the top of the base plate. M.S. fabricated hot dip galvanized housing using IS2062 grade steel accommodating CA pulleys with stainless steel pins for the suspension of wire ropes and the electrical cables. \nPulleys are grooved suitably to ensure that the wire ropes/cables do not get dislodged from their positions while raising / lowering. Self-lubricating bearings and stainless steel shaft shall be provided for smooth and maintenance free operation throughout the mast life. The head-frame shall be made in three compartments placed 120 degree apart for most optimum balancing of lantern carriage. Head frame shall have top canopy to protect the mast from entry of water / solid particles etc from the top. Top canopy shall have provision for fixing lightning arrestor of suitable design. \nLANTERN CARRIAGE\nA fabricated MS hot dip galvanized lantern carriage shall be provided for mounting of luminaires. The luminaire arms shall be welded or bolted to the carriage as per bidder’s design. The lantern carriage shall be made of steel pipes. The flanges shall be jointed at site by stainless steel bolts and nuts. Inner side of the lantern carriage shall have a PVC guide ring to protect the mast surface while raising and lowering of the lantern carriage. The diameter of the lantern carriage shall be of size approximately 1000 mm-1100 mm to accommodate 23 LED light fittings in four tiers and for this double lantern ring will be required. The lantern ring should be fabricated with all hot dip galvanized pipes/ channels on the front and back side to get a flat mounting of 23 LED luminaires to take load of luminaires and equal counter weight on other side . The length and size of the bars should be suitable to mount the LED luminaires. The Double lantern carriage will have top ring at approximately\n29.8 m and the second ring will be at approximately 28.5 m. 2 junction boxes shall be provided on the lantern carriage for connecting the luminaries and the trailing cables. A suitable PVC/Hylam BOARD shall be provided at the base of the mast at door level. This will have arrangement for install MCB of suitable rating for the lighting load of the mast. Each High mast shall have a weather proof control panel for switching ON and OFF of the luminaires. The control panel is placed at a distance of about 3 m from the mast centre. The control panel shall have provision for operation of the power tool. The control panel should contain an Incomer 4 pole MCCB of 63 A rating. The lighting control should be through 2 nos. of 32A contactor, for switching ON and OFF the lights 2 nos. of pushbutton sets shall be provided. For power tool operation there should be 2 nos. of 9 A contactors and suitable overload relay. Two nos. of push buttons shall be provided in the panel for the operation of ‘RAISING’ and ‘LOWERING’ with 16 Nos. foundation bolts & foundation size as per company design supplied by the manufacturer with 2 / 3nos. steel wire rope grade AISI 316, 7/19 Con. dia 8mm, double drum system for safe working load not less than 1500 Kg. and twin dome aviation light with LED including cost of suitable RCC (M-20) foundation as per standard design recommended by manufacture taking soil bearing capacity 4 ton wind speed 180Km per hour including shuttering, bar binding fixing of foundation bolts reffiling, and including the cost of aviation light etc. to complete the job in all respect upto entire satisfaction of Engineer-in-charge as per standard design of manufacturer. Thickness of the mast shall have a minimum top OAF of 200 mm and minimum bottom OAF OF 725mm. Bottom section shall be of 6 mm, Middle section shall be 5 mm and top section shall be of 5 mm Base plate size 925x38x38mm thick.Thickness of Galvanization = Top = 65micron (Min.) middle = 75micron Bottom = 86micron (Min.) \nNote:- The agency will submit the design of mast, lantern including luminaires installation structure, foundation, bolts etc. from manufacturer of the mast before supply of the same with the undertaking from manufacturer that mast is safe for use with 23 nos. LED lights and allied structure / equipment.\nMake: - Philips / Bajaj / Volmont / Surya | BI01010001010000000000000515BI0100001132 | 6 | Each |
| 22 | 14 | NS-2\nSupply and erection of LED Flood light Luminaires 350W of Makes: Surya SLEFL 350W IP66 LUMOS or its equivalent make of Philips / Crompton / Bajaj with lense with high power LED flood light in aluminium PDC housing, toughened glass cover with IP 66 protection and accessories required to complete the job in all respect including erection and fixing including connection and other petty material for the same upto the entire satisfaction of Engineer in Charge of the work. | BI01010001010000000000000515BI0100001133 | 138 | Each |
| 23 | 15 | NS-3\nSupply and erection of LED Flood light Luminaires 240W of Makes: Surya SLEFL 350W IP66 LUMOS or its equivalent make of Philips / Crompton / Bajaj with lense with high power LED flood light in aluminium PDC housing, toughened glass cover with IP 66 protection and accessories required to complete the job in all respect including erection and fixing including connection and other petty material for the same upto the entire satisfaction of Engineer in Charge of the work. | BI01010001010000000000000515BI0100001134 | 96 | Each |
| 24 | 16 | NS-4\nSupply and erection of rectangular bracket of size 1 Mtr. x 0.5 Mtr. made of MS channel of size 100mm x 50mm x 50mm with collar pipe (GI) 75mm dia 60mm long duly welded, painted with two coats of aluminium paint including the cost of welding, cutting making hole and all labour and petty material required to complete the job in all respect upto the entire satisfaction of Engineer-in-charge of work. | BI01010001010000000000000515BI0100001135 | 20 | Each |
| 25 | 17 | NS-5\nSupply and erection of double door, sheet steel enclosure vertical type distribution board (Suitable for MCCB as incommer & MCB for out going circuit but with out cost of MCCB / MCB etc. The distribution board duly recessed in wall / surface mounting necessary connections with all labour & material required to complete the job in all respect upto the entire satisfaction of Engineer-in-charge of work.\n(i) 4 way | BI01010001010000000000000515BI0100001136 | 5 | Each |
| 26 | 17.01 | (ii) 6 way | BI01010001010000000000000515BI0100001137 | 1 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
