Renovation Of Offices Under Collectorate Solapur As Per Nit
Tender Value
2.11 Crore
Estimated cost
Bid Submission
03 Sep 2019
0 days left
EMD
1.50 Lakhs
Bank guarantee accepted
Document Fee
17700
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
SOLAPUR → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Renovation Of Offices Under Collectorate Solapur As Per Nit
BOQ
| Name of Work: Renewation of DPO office, JDR office, SRO office, and sub treasury offices under Collectorate Solapur | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Items | |||
| 2 | 1.01 | Item No. 1 Supply and installation of 1 bay Single Static Pull Push drive unit body of Compactors of size H- 2362 mm x W- 915 mm X D - 457 mm made out of 0.8 mm thick Cold Rolled Cold Annealed Steel conforming to IS:513 Grade, having 6 loading levels (Load Bearing Capacity - 80 Kgs Uniformly Distributed Load) formed by 5 no’ûs adjustable shelves, finished with Fire Retardant epoxy polyester powder coating of approved color & shade with a dry film thickness of minimum 40 microns, oven baked with a controlled temperature of 180 deg.C to 200 deg.C, the Undercarriage made up of welded frame of HR sheet 3.15mm thk conforming to IS:10748 suitably fabricated to take the load based on configuration having Fasteners, label holders, mounted on guide channels as per attached Detailed Specifications and Design etc. complete. | item1 | 1 | Nos |
| 3 | 1.02 | Item No. 2 Supply and installation of 1 bay Single Mobile Pull Push drive unit body of Compactors of size H- 2362 mm x W- 915 mm X D - 457 mm made out of 0.8 mm thick Cold Rolled Cold Annealed Steel conforming to IS:513 Grade, having 6 loading levels (Load Bearing Capacity - 80 Kgs Uniformly Distributed Load) formed by 5 no’ûs adjustable shelves, finished with Fire Retardant epoxy polyester powder coating of approved color & shade with a dry film thickness of minimum 40 microns, oven baked with a controlled temperature of 180 deg.C to 200 deg.C, the Undercarriage made up of welded frame of HR sheet 3.15mm thk conforming to IS:10748 suitably fabricated to take the load based on configuration having Fasteners, label holders, mounted on guide channels as per attached Detailed Specifications and Design etc. complete. | item2 | 1 | Nos |
| 4 | 1.03 | Item No. 3 Supply and installation of 1 bay Twin Mobile Pull Push drive unit body of Compactors of size H - 2362 mm x W - 915 mm X D - 915 mm made out of 0.8 mm thick Cold Rolled Cold Annealed Steel conforming to IS:513 Grade, having 6 loading levels (Load Bearing Capacity - 80 Kgs Uniformly Distributed Load) formed by 5 no’ûs adjustable shelves, finished with fire retardant epoxy polyester powder coating of approved color & shade with a dry film thickness of minimum 40 microns, oven baked with a controlled temperature of 180 deg.C to 200 deg.C, the Undercarriage made up of welded frame of HR sheet 3.15mm thk conforming to IS:10748 suitably fabricated to take the load based on configuration having Fasteners, label holders, mounted on guide channels as per attached Detailed Specifications and Design etc. complete. | item3 | 1 | Nos |
| 5 | 1.04 | Item No. 4 Supply and installation of 2 Bay Single Static drive unit body of Compactors of size H - 2362 mm x W - 1830 mm X D - 457 mm made out of 0.8 mm thick Cold Rolled Cold Annealed Steel conforming to IS:513 Grade, having 6 loading levels (Load Bearing Capacity - 80 Kgs Uniformly Distributed Load) formed by 5 noûs adjustable shelves, finished with fire retardant epoxy polyester powder coating of approved color & shade with a Dry Film Thickness of minimum 40 microns, oven baked with a controlled temperature of 180 deg.C to 200 deg.C, the Undercarriage made up of welded frame of HR sheet 3.15mm thk conforming to IS:10748 suitably fabricated to take the load based on configuration having Fasteners, label holders, mounted on guide channels as per attached detailed specifications and design etc. | item4 | 1 | Nos |
| 6 | 1.05 | Item No. 5 Supply and installation of 2 Bay Single Mobile drive unit body of Compactors of size H-2362 mm x W- 1830 mm X D - 457 mm made out of 0.8 mm thick Cold Rolled Cold Annealed Steel conforming to IS:513 Grade, having 6 loading levels (Load Bearing Capacity - 80 Kgs Uniformly Distributed Load) formed by 5 noûs adjustable shelves, finished with fire retardant epoxy polyester powder coating of approved color & shade with a Dry Film Thickness of minimum 40 microns, oven baked with a controlled temperature of 180 deg.C to 200 deg.C, the Undercarriage made up of welded frame of HR sheet 3.15mm thk conforming to IS:10748 suitably fabricated to take the load based on configuration having Fasteners, label holders, mounted on guide channels as per attached detailed specifications and design etc | item5 | 1 | Nos |
| 7 | 1.06 | Item No. 6 Supply and installation of 2 Bay Twin Mobile drive unit body of Compactors of size H - 2362 mm x W - 1830 mm X D - 915 mm made out of 0.8 mm thick Cold Rolled Cold Annealed Steel conforming to IS:513 Grade, having 6 loading levels (Load Bearing Capacity - 80 Kgs Uniformly Distributed Load) formed by 5 noûs adjustable shelves, finished with fire retardant epoxy polyester powder coating of approved color & shade with a Dry Film Thickness of minimum 40 microns, oven baked with a controlled temperature of 180 deg.C to 200 deg.C, the Undercarriage made up of welded frame of HR sheet 3.15mm thk conforming to IS:10748 suitably fabricated to take the load based on configuration having Fasteners, label holders, mounted on guide channels as per attached detailed specifications and design etc. | item6 | 1 | Nos |
| 8 | 1.07 | Item No. 7 Supply and installation of 3 bay Single Static drive unit body of Compactors of size H- 2362 mm x W- 2745 mm X D - 457 mm made out of 0.8 mm thick Cold Rolled Cold Annealed Steel conforming to IS:513 Grade, having 6 loading levels (Load Bearing Capacity - 80 Kgs Uniformly Distributed Load) formed by 5 no’ûs adjustable shelves, finished with Fire Retardant epoxy polyester powder coating of approved color & shade with a dry film thickness of minimum 40 microns, oven baked with a controlled temperature of 180 deg.C to 200 deg.C, the Undercarriage made up of welded frame of HR sheet 3.15mm thk conforming to IS:10748 suitably fabricated to take the load based on configuration having Fasteners, label holders, mounted on guide channels as per attached Detailed Specifications and Design etc. complete. | item7 | 1 | Nos |
| 9 | 1.08 | Item No. 8 Supply andinstallation of 3 Bay Single Mobile drive unit body of Compactors of size H- 2362 mm x W- 2745 mm X D - 457 mm made out of 0.8 mm thick Cold Rolled Cold Annealed Steel conforming to IS:513 Grade, having 6 loading levels (Load Bearing Capacity - 80 Kgs Uniformly Distributed Load) formed by 5 no’ûs adjustable shelves, finished with Fire Retardant epoxy polyester powder coating of approved color & shade with a dry film thickness of minimum 40 microns, oven baked with a controlled temperature of 180 deg.C to 200 deg.C, the Undercarriage made up of welded frame of HR sheet 3.15mm thk conforming to IS:10748 suitably fabricated to take the load based on configuration having Fasteners, label holders, mounted on guide channels as per attached Detailed Specifications and Design etc. complete. | item8 | 1 | Nos |
| 10 | 1.09 | Item No. 9 Supply andinstallation of 3 bay Twin Mobile drive unit body of Compactors of size H - 2362 mm x W - 2745 mm X D - 915 mm made out of 0.8 mm thick Cold Rolled Cold Annealed Steel conforming to IS:513 Grade, having 6 loading levels (Load Bearing Capacity - 80 Kgs Uniformly Distributed Load) formed by 5 no’ûs adjustable shelves, finished with fire retardant epoxy polyester powder coating of approved color & shade with a dry film thickness of minimum 40 microns, oven baked with a controlled temperature of 180 deg.C to 200 deg.C, the Undercarriage made up of welded frame of HR sheet 3.15mm thk conforming to IS:10748 suitably fabricated to take the load based on configuration having Fasteners, label holders, mounted on guide channels as per attached Detailed Specifications and Design etc. complete. | item9 | 1 | Nos |
| 11 | 1.1 | Item No. 10 Providing & fixing in Position Hinge Door made up of 0.8 thick CRCA Steel confirming to IS:513 Grade having recessed Die cast handle cum lock giving 3 way locking length a lever and shooting bolts etc., as directed by Engineer in charge. | item10 | 1 | pair |
| 12 | 1.11 | Item No. 11 Supply and installation of Guide Channels consisting of J section 2 mm thick HR sheet & 25 mm Square bright bar – both connected by screws, prior to the embedding of the guide channels with the help of raul plug & screw, the ground has to be in properly levelled condition as per attached Detailed Specifications and Design etc. complete. | item11 | 1 | rmt |
AI Tender Summary
Tender Timeline
Jan 01, 1900
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 04, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender